Cradlepoint S4A340A Integrated Mobile Broadband Router User Manual

Cradlepoint, Inc. Integrated Mobile Broadband Router

User Manual.pdf

All-in-One, Cloud-Managed Networking Solution
Quick Start Guide
2
CradlePoint
The best in wireless WAN meets the best in wireless LAN.
Integrated 4G LTE Dual-Band Concurrent WiFi
with 802.11ac
Combines Integrated 4G LTE and Dual-Band Concurrent WiFi with 802.11ac
Failover/failback and load balancing: 4G LTE + Ethernet + WiFi as WAN
Enterprise-level security and features, including: VPN, VLAN, VRRP, BGP, OSPF, RIP, and more
Dynamic Management with CradlePoint Enterprise Cloud Manager
Accessories
Power adapters and international power cords
External modem antennas and cabling
Rack mounting bracket
CradlePoint Enterprise Cloud Manager
Use CradlePoint Enterprise Cloud Manager for rapid deployment, dynamic management, and enhanced intelligence of
CradlePoint enterprise network solutions. Visit www.cradlepoint.com/ecm to learn more.
Enterprise Support
For enhanced services including enterprise-level support, extended warranties, site surveys, and expert installation, check out CradlePoint’s
CradleCare suite of services. Visit www.cradlepoint.com/cradlecare to learn more.
3
CradlePoint
What’s In The Box
CradlePoint AER 2100 Dual-Band 2.4/5 GHz
WiFi Antennas
12V 3A AC/DC
Power Supply
Ethernet Cable Quick Start GuideMultipurpose Retaining Tool
with screws for securing
Integrated 3G/4G Modem
with Antennas
4
Hardware
USB 2.0 Port
LEDs
(see pages 12-13 for descriptions)
Lock Slot
10/100/1000 Ethernet Port
(Configurable: LAN or WAN
Default: WAN)
Reset
USB 2.0 Port
Power
Switch and Port
LEDs
(see pages 12-13 for descriptions)
Ground Screw
Front Panel
Back Panel
10/100/1000 Ethernet Ports
(Configurable: LAN or WAN
Default: LAN)
5
Hardware
Left Side Right Side
Modem Port
(USB 2.0)
Modem Port
(USB 3.0)
Modem Port
(USB 2.0)
With Cover
Cover Removed
With Integrated Modem
3G/4G Antenna Connectors
(SMA)
WiFi Antenna Connectors
(Reverse SMA)
WiFi Modem
When connecting the provided antennas, review the connection points.
WiFi antennas have flat circular bases (RSMA).
Modem antennas have protruding pins (SMA).
Integrated modem antennas include symbols to indicate the cellular technology:
= LTE/EVDO for Verizon
= LTE/HSPA+ for AT&T/Canada
= LTE/HSPA+ for Europe
6
Getting Started
1. Insert an activated SIM.
A wireless broadband data plan must be added to your CradlePoint AER 2100. Wireless broadband data plans are available from
wireless carriers such as Verizon, AT&T, Sprint, EE, and Vodafone. The SIM must be provisioned with the carrier. Contact your
carrier for details about selecting a data plan and about the process for provisioning your SIM.
Once you have an activated SIM, insert it into the integrated modem. Be sure to insert the card with the notch-end first and the
gold contacts facing down it will click into place.
Gold contacts must
face down
Notch-end goes
in first
Sample SIM card
7
Getting Started (continued)
2. Attach the integrated modem.
Follow these steps to attach the integrated modem:
1. Remove the left side panel cover from the router. Use a Phillips screwdriver to remove the screws, and use the
Multipurpose Retaining Tool (included in the router package) to remove the cover.
2. Slide the modem into the side of the router. The protruding section of the green board fits into the groove.
3. Reattach the panel cover and screw it back on. (When necessary, remove the cover and modem using the
Multipurpose Retaining Tool.)
8
Getting Started (continued)
3. Attach the WiFi and modem antennas.
Attach the three WiFi antennas (included) and two modem antennas to the connectors. Antennas are jointed, which enables
you to position them for optimal signal. To attach, hold the antenna straight and twist the base of the antenna to connect, folding
the joint if needed.
Examples of suggested antenna orientations:
Care should be taken to ensure that the router antennas are not near metal or other RF reflective surfaces.
Wall Mount
Desk Mount
9
Getting Started (continued)
4. Connect the power source.
Plug the provided power supply (12V DC wall adapter) into an electrical outlet. Then connect the power supply to the router.
Ensure power is switched on:
O = OFF
I = ON
When you set the power switch to the ON ( I ) position, watch for the power LED to illuminate.
If you would like to secure the power supply cord, attach the Multipurpose Retaining
Tool as shown. Secure with included screws.
Power Switch Power
Supply Port
5. Connect to a computer or other network equipment.
In order to access the CradlePoint AER 2100, establish a connection to the router. Connect wirelessly to the WiFi broadcast or
with an Ethernet cable connected to your computer and then plugged into one of the Ethernet LAN ports (numbered 1–4).
The default WiFi network name broadcast is “2100-xxx”, where “xxx” is the last three characters of your router’s MAC
address (this is the
SSID
on the product label). To connect to the WiFi, you will need to input the
DEFAULT PASSWORD
when prompted. The
DEFAULT PASSWORD
is provided on the product label found on the bottom of your router.
Accessing the Administration Pages
Once you are connected, open the CradlePoint AER 2100’s GUI-
based administration pages to make configuration changes to your
router.
1. Open a browser window and type “
cp/
” or
192.168.0.1
in the address bar. Press
ENTER/
RETURN
.
2. When prompted for your password, type the eight character
DEFAULT PASSWORD
found on the product label.
10
Getting Started (continued)
Made in Taiwan
RoHS
Part No.: 2100
www.cradlepoint.com
H/W ver.1.0
12V 3A (max 4A)
FCC ID:UXX-S4A340A
IC:6921A-S4A340A
Model No.:
S4A340A
Default Password:440c1fc1
MAC Address: 0030440c1fc1
Serial No.:MM130167900418
SSID: 2100-fc1
11
First Time Setup Wizard
When you log in for the first time, you will be automatically directed to the FIRST TIME SETUP WIZARD, which will walk you through
the steps to customize your CradlePoint AER 2100. You have the ability to configure any of the following:
Administrator Password
Time Zone
WiFi Network Name
Security Mode
Access Point Name (APN) for SIM-based modems
Modem Authentication
Failure Check
If you are currently using the router’s WiFi network, you will need to reconnect your devices to the network using the newly established wireless
network name and password.
NOTE: To return to the First Time Setup Wizard after your initial login, select GETTING STARTED on the top navigation bar and FIRST TIME SETUP in the dropdown
menu.
12
LED Information
SIGNAL STRENGTH Blue LED bars indicate the active modem’s signal strength.
4 Solid Bars = Strongest signal.
1 Blinking Bar = Weakest signal. (A blinking bar indicates half of a bar.)
POWER The CradlePoint AER 2100 must be powered using an approved 12V DC power source.
Green = Powered ON.
No Light = Not receiving power. Check the power switch and the power source connection.
Flashing Amber = Attention. Open the administration pages (see page 10) and check the router status.
EC
ETHERNET WAN Indicates information about a data source connected to the Ethernet WAN port.
Blue = Connected to an active Ethernet WAN interface.
WiFi BROADCAST These two LEDs indicate activity on the WiFi broadcast for both the 2.4 GHz and 5
GHz bands.
2.4G (green) = 2.4 GHz WiFi is on and operating normally.
5G (blue) = 5 GHz WiFi is on and operating normally.
21
2.4G
5G
32
1
4
RESET
LED_word.Icon color: White color
logo color: cool-gray 8C logo color: cool-gray 8C
(塑膠前蓋印刷)
(鐵件下蓋印刷)
(Cap1 logo)(Cap2 logo)
USB_icon color: White color
IO port_word.icon color: White color
+
metal-Thames Graphics Design
WRT-C8B
Rev:1.0 color& Graphics
Date:Jun.24.2013
Designer:ME Department
Front-cover: Black
Material: ABS
Texture:MT11015
Bottm-metal: Black
Material: SPCC
Texture:MT11015
Cradlepoint: White
Wipipe: White+Red(PMS 186C)
2
1
2
1
260.00 mm
13
LED Information
INTEGRATED MODEM Indicates the status of integrated modems.
EXTERNAL USB MODEM Indicates the status of external USB modems.
Both integrated and external USB modems have the following LED indicators:
Green = Modem has established an active connection.
Blinking Green = Modem is connecting.
Amber = Modem is not active.
Blinking Amber = Data connection error. No modem connection possible.
Blinking Red = Modem is in the process of resetting.
EC
21
2.4G
5G
32
1
4
RESET
LED_word.Icon color: White color
logo color: cool-gray 8C logo color: cool-gray 8C
(塑膠前蓋印刷)
(鐵件下蓋印刷)
(Cap1 logo)(Cap2 logo)
USB_icon color: White color
IO port_word.icon color: White color
+
metal-Thames Graphics Design
WRT-C8B
Rev:1.0 color& Graphics
Date:Jun.24.2013
Designer:ME Department
Front-cover: Black
Material: ABS
Texture:MT11015
Bottm-metal: Black
Material: SPCC
Texture:MT11015
Cradlepoint: White
Wipipe: White+Red(PMS 186C)
2
1
2
1
260.00 mm
ADDITIONAL LED INDICATIONS
Several different LEDs flash when the factory reset button is detected.
Two of the modem LEDs blink red in unison for 10 seconds when there is an error during firmware
upgrade.
14
Troubleshooting
You may need to update the CradlePoint AER 2100 firmware to get our latest features or to connect to new modems. For more information, visit:
knowledgebase.cradlepoint.com
HOW TO UPDATE FIRMWARE (AUTOMATIC)
1) Log in to the administration pages (see page 10). You may have changed the ADMINISTRATOR PASSWORD.
2) Select SYSTEM SETTINGS SYSTEM SOFTWARE.
3) If new firmware is available, select AUTOMATIC (Internet). (This process requires an active data source.)
4) Wait a moment while firmware is updated and the router reboots (do not close the browser window when updating).
HOW TO UPDATE FIRMWARE (MANUAL)
Downloading firmware manually is only necessary when your router is offline. This could occur if your modem won’t connect because of outdated firmware.
1) Go to www.cradlepoint.com/firmware. Select the AER 2100 from the dropdown list.
2) Download the most current version of the router firmware to your desktop.
3) Follow steps 1–2 above: log in to the administration pages and navigate to SYSTEM SETTINGS SYSTEM SOFTWARE.
4) Select MANUAL FIRMWARE UPLOAD and click the BROWSE button.
5) Select the firmware file you saved to your desktop and click OPEN and then BEGIN FIRMWARE UPGRADE.
6) Wait a moment while firmware is updated and the router reboots (do not close the browser window when updating).
15
Troubleshooting (continued)
Depending on your modem, you may need to specify the APN (Access Point Name).
SELECT THE APN
1) Log in to the administration pages (see page 10).
2) Select INTERNET CONNECTION MANAGER.
3) Select the modem you would like to manage. Click EDIT to open the WAN Configuration editor.
4) Select the SIM/APN/AUTH SETTINGS tab. In the ACCESS POINT CONFIGURATION field, either select the desired APN
from the options displayed or enter it manually.
5) Input the username and password for authentication if required by your carrier.
6) Click SUBMIT.
16
Features
The CradlePoint AER 2100 is a business-grade router specifically designed to meet
the needs of distributed enterprise: retail locations, branch offices, retaurants, and
convenience stores. Optimized for performance, reliability, and maximum WiFi range,
the CradlePoint AER has access to a cloud-enabled management and application
platform called CradlePoint Enterprise Cloud Manager for rapid deployment, dynamic
management, and enhanced intelligence of CradlePoint enterprise edge solutions.
Secure Access
The CradlePoint AER 2100 supports WEP, WPA, and WPA2 encryption modes to create secure Internet connections for up to 128 connected devices
per WiFi channel (2.4 GHz and 5 GHz). 253 users can connect via Ethernet (with default DHCP settings). Prevent unwanted access to computers
connected to your networks with an SPI Firewall and NAT (Network Address Translation). Features like URL Filtering, Traffic Filtering, DMZ, Virtual
Server, Port Forwarding, and FTP pass-through (passive and active) are also available to enable safe Internet access for all connected users.
HOW TO CONFIGURE: Select NETWORK SETTINGS FIREWALL for firewall options. Select NETWORK SETTINGS
WIFI / LOCAL NETWORKS for WiFi security settings, IPv6 configuration, and more.
VPN (Virtual Private Networking), GRE (Generic Route Encapsulation)
Create, manage, and terminate secure VPN tunnels between remote computers and secure corporate networks with IPsec. With up to 20
concurrent sessions, the CradlePoint AER 2100 supports both VPN and GRE, including multiple routes in a single tunnel. Provide end-to-end
protection of secure company communications with Hash and Cipher encryption algorithm protocols.
HOW TO CONFIGURE: Select INTERNET VPN Tunnels or INTERNET GRE Tunnels. Click ADD to create a new tunnel.
17
Features
Load Balancing
When multiple data sources are connected to the router (4G, Ethernet, WiFi), it can be configured to distribute all connected users or device
traffic across active data connections. This feature distributes each connected user to the best data source available, relieving congestion and
pressure on any single data source. If you are using more than two LTE modems, a special 12V 4A (48W) power supply is required.
HOW TO CONFIGURE: Select INTERNET CONNECTION MANAGER. In the WAN Interfaces table, select LOAD BALANCE
for the WAN devices you want configured for load balancing.
Failover
When multiple Internet sources (4G, Ethernet, WiFi) are connected to the CradlePoint AER 2100, the router can automatically detect an Internet
outage and “fail over” to a secondary connection and “fail back” when the primary data service returns. Redundant connection keeps your busi-
ness going.
HOW TO CONFIGURE: Select INTERNET CONNECTION MANAGER. Order your connections by failover priority.
Dual-Band Concurrent WiFi Networks
The CradlePoint AER 2100 can broadcast up to four WiFi networks on both the 2.4 GHz and 5 GHz bands. Secured SSIDs are used for your
trusted workgroup members. Guest (public) SSIDs can provide full, secure access to the Internet, but users are restricted from accessing the
router administration console or any connected devices on the private network. Each network can be configured with its own security, QoS, and
VLAN Settings. You also have the ability to “Hide” network names (SSIDs) from broadcast.
HOW TO CONFIGURE: Enable the Guest Network in Step 2 of the First Time Setup Wizard. It will appear by default as “Guest-XXX” in your avail-
able networks list (XXX = the last three characters of your routers MAC Address). For more WiFi configuration options, go to NETWORK
SETTINGS WIFI / LOCAL NETWORKS.
18
Features
VLAN Support
Create and manage virtual LANs to segregate and secure your network.
HOW TO CONFIGURE: Select NETWORK SETTINGS WIFI / LOCAL NETWORKS. Select the “VLAN Interfaces” tab under
LOCAL NETWORK INTERFACES.
WiFi as WAN
The CradlePoint AER 2100 can receive an existing WiFi signal and use it to create secure Internet access, allowing you to connect devices
using the CradePoint AER 2100’s security features. The WiFi as WAN feature can be used as a WiFi repeater or as a WiFi-to-Ethernet adapter
for non-WiFi devices.
HOW TO CONFIGURE: Select INTERNET WIFI AS WAN / BRIDGE. Enable WIFI AS WAN or WIFI BRIDGE by clicking
on the appropriate button. The router automatically detects nearby WiFi networks: import the desired network.
VRRP (Virtual Router Redundancy Protocol)
VRRP provides hardware redundancy for increased reliability. Configure master and backup routers for you network.
HOW TO CONFIGURE: Select NETWORK SETTINGS WIFI / LOCAL NETWORKS. Select the desired network and click
EDIT. Select the VRRP tab for configuration options.
Advanced Routing Protocols (BGP/OSPF/RIP)
Border Gateway Protocol (BGP), Open Shortest Path First (OSPF), and Routing Information Protocol (RIP) are enterprise routing protocols that
improve router communication and understanding of the network topology.
HOW TO CONFIGURE: Select NETWORK SETTINGS ROUTING PROTOCOLS. Select the desired routing protocol to view
configuration options.
19
Cloud-Enabled Management and Application Platform
CradlePoint Enterprise Cloud Manager: Deploy and Manage the Intelligent Network
Rapidly deploy and dynamically manage networks at geographically distributed stores and branch locations with Enterprise
Cloud Manager, CradlePoint’s next generation management and application platform. Enterprise Cloud Manager integrates
cloud management with your CradlePoint devices to improve productivity, increase reliability, reduce costs, and enhance the
intelligence of your network and business operations.
Deployment – congure devices by groups or individually, and update rmware easily with a
few clicks.
Management – monitor device statuses in real time and set proactive alerts for optimized 3G/4G data
usage and network uptime.
Intelligence – manage network security and track network interference information.
To learn more about CradlePoint Enterprise Cloud Manager, contact services@cradlepoint.com or visit
www.cradlepoint.com/ecm.
20
Regulatory, Warranty, Safety, and Privacy Information
Federal Communication Commission Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are
designed to provide reasonable protection against such interference in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions provided by CradlePoint, may cause harmful interference
to radio communications. This device must accept any interference received, including interference that may cause undesired operations. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by using one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio or television technician for help.
Changes or modifications not expressly approved by CradlePoint, Inc. could void the user’s authority to operate the product.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow opera-
tion instruction as documented in this manual.
Industry Canada Statement
This device complies with RSS-210, RSS-102, and RSS-Gen of the Industry Canada Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
21
Regulatory, Warranty, Safety, and Privacy Information (continued)
IMPORTANT NOTE: Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 37cm between the radiator and your body.
Caution:
1) The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite
systems.
2) The maximum antenna gain permitted (for devices in the band 5725-5825 MHz) to comply with the e.i.r.p. limits specified for point-to-point
and non point-to-point operations as appropriate, as stated in section A9.2(3).
This device has been designed to operate with an antenna having a maximum gain of 5 dBi. Antenna having a higher gain is strictly prohibited
per regulations of Industry Canada. The required antenna impedance is 50 ohms.
Déclaration d’Industrie Canada
Ce dispositif est conforme à la norme CNR-210, CNR-102, et CNR-Gen d’Industrie Canada applicable aux appareils radio exempts de licence.
Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif
doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.
NOTE IMPORTANTE (Pour l’utilisation de dispositifs mobiles): Déclaration d’exposition aux radiations
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit
être installé et utilisé avec un minimum de 37 cm de distance entre la source de rayonnement et votre corps.
Précaution
1) Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l’intérieur afin de réduire
les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
22
Regulatory, Warranty, Safety, and Privacy Information (continued)
2) Le gain d’antenne maximal autorisé (pour les appareils dans la bande 5725-5825 MHz) pour se conformer à la pire limites fixées pour
les opérations de point à point et non point à point et non le cas échéant, comme indiqué dans la section A9.2 (3).
Ce dispositif a été conçu pour fonctionner avec une antenne ayant un gain maximal de 5 dBi. Une antenne à gain plus élevé est strictement
interdite par les règlements d’Industrie Canada. L’impédance d’antenne requise est de 50 ohms.
Open Source Software
This product contains software distributed under one or more of the following open source licenses: GNU General Public License Version 2, BSD
License, Net-SNMP License, and PSF License Agreement for Python 3.3. For more information on this software, including licensing terms and
your rights to access source code, contact CradlePoint at www.CradlePoint.com.
Warranty Information
CradlePoint, Inc. warrants this product against defects in materials and workmanship to the original purchaser (or the first purchaser in the case
of resale by an authorized distributor) for a period of one (1) year from the date of shipment. This warranty is limited to a repair or replacement
of the product, at CradlePoint’s discretion. CradlePoint does not warrant that the operation of the device will meet your requirements or be
error free. Within thirty (30) days of receipt should the product fail for any reason other than damage due to customer negligence, purchaser
may return the product to the point of purchase for a full refund of the purchase price. If the purchaser wishes to upgrade or convert to another
CradlePoint, Inc. product within the thirty (30) day period, purchaser may return the product and apply the full purchase price toward the
purchase of another CradlePoint product. Any other return will be subject to CradlePoint, Inc.’s existing return policy.
Limitation of CradlePoint Liability
The information contained in this Quick Start Guide is subject to change without notice and does not represent any commitment on the part
of CradlePoint or its affiliates. CRADLEPOINT AND ITS AFFILIATES HEREBY SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL: (A) DIRECT,
INDIRECT, SPECIAL, GENERAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING WITHOUT LIMITATION FOR
23
Regulatory, Warranty, Safety, and Privacy Information (continued)
LOSS OF PROFITS OR REVENUE OR OF ANTICIPATED PROFITS OR REVENUE ARISING OUT OF THE USE OR INABILITY TO USE THE DEVICE, EVEN
IF CRADLEPOINT AND/OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND EVEN IF SUCH DAMAGES ARE
FORESEEABLE; OR (B) CLAIMS BY ANY THIRD PARTY.
Notwithstanding the foregoing, in no event shall the aggregate liability of CradlePoint and/or its affiliates arising under or in connection with the
device or integrated modems, regardless of the number of events, occurrences, or claims giving rise to liability, exceed the price paid by the
original purchaser of the device or integrated modems.
Privacy
CradlePoint collects general data pertaining to the use of CradlePoint products via the Internet including, by way of example, IP address, device
ID, operating system, browser type and version number, etc. To review CradlePoint’s privacy policy, please visit: http://www.cradlepoint.com/
privacy.
Other Binding Documents; Trademarks; Copyright
By using your CradlePoint device, you agree to be bound by CradlePoint’s Terms of Use, User License and other Legal Policies, all as posted at
www.cradlepoint.com/legal. Please read these documents carefully. CradlePoint and the CradlePoint logo are trademarks of CradlePoint, Inc. ©
2013 CradlePoint, Inc. All rights reserved.
RFEXPOSURESAFEFYNOTICE:
TocomplywithFCC/ICRFExposureLimitssetforthforanuncontrolledenvironment,theproductmustbeinstalledandoperatedwitha
minimumseparationdistance(betweennearbyperson(s)andradiatingantenna)accordingtothefollowingscenarios:
1.20cmminimumwhentheproductisoperatedalonewithoutcotransmittingwithaplugin3GUSBdongledevice.
2.37cmminimumwhentheproductisoperatedwithaplugin3GUSBdevicewhichhasmaximumof7WERPoutputpower.
3.Forcotransmissionscenariowhichisnotcoveredabove,pleaseconsulttheRFtechnicianordevicesupplier.
AVERTISSEMENTDESECURITECONCERNANTLESEXPOSITIONSAUXFREQUENCESRADIO
Pouretreconformeauxlimitesd’expositionauxfrequencesradioFCC/ICetabliespourunenvironnementnoncontrole(utilisationparlegrand
public),l’equipementdoitetreinstalleetutiliseenlaissantunedistancedeseparationdesecurite(entrelaoulespersonnespresentesdansle
perimetreetl’antenned’emission)selonlescassuivants:
1.20cmauminimumquandleproduitestutiliseseulsanscotransmettreal’aided’unappareil3GUSBenfichable.
2.37cmauminimumquandleproduitestutiliseavecunappareil3GUSBenfichableayantunepuissancedesortiemaximalede7WERP.
3.Dansdescasdecotransmissionnonmentionnescidessus,mercidebienvouloirconsulteruntechnicienradioqualifieoudirectementle
fabricantdel’appareil.

Navigation menu