Craftsman 172718160 User Manual TRIMMER Manuals And Guides 1408200L

User Manual: Craftsman 172718160 172718160 CRAFTSMAN TRIMMER - Manuals and Guides View the owners manual for your CRAFTSMAN TRIMMER #172718160. Home:Lawn & Garden Parts:Craftsman Parts:172718160 Craftsman Grass trimmer (weed wacker) Manual

Open the PDF directly: View PDF .
Page Count: 15

Download
Open PDF In Browser	View PDF

Operator'sIVlanual

CRRFT_MRH °

Lithium-ION
18-Volt 12-in.

CRRFT_MRN °

//

Weedwacker® //
Cordless
Tr=mmer

_o_

CHARGE

BATTERY

_/

BEFORE

FIRST

CAUTION:
Read, understand and follow all
Safety Rules and Operating Instructions in this
Manual before using this product.
Sears Brands Management Corporation,
Hoffman Estates, IL 60179
See the full line of Craftsman ® products
at craftsman,corn

USE

WARRANTY
SAFETY
UNPACKING
DESCRIPTION
ASSEMBLY
OPERATION
MAINTENANCE
ESPANOL

Warranty
....................................................................................
Page 2
Safety
Symbols
...........................................................................
Page 3
Safety
Instructions
........................................................................
Pages4 - 10
Unpacking
..................................................................................
Page 11
Description
.................................................................................
Pages12- 14
Assembly
andAdjustments
..........................................................
Pages14-20
Operation
......................................................................................
Pages20-25
Maintenance
.................................................................................
Page 26
Accessories
........................................................................................
Pages26-27
PartsList......................................................................................
Pages28- 29

The purpose of safety symbols is to attract your attention to possible
dangers. The safety symbols and the explanations with them deserve your
careful attention and understanding. The symbol warnings do not, by
themselves, eliminate any danger. The instructions and warnings they give
are no substitutes for proper accident prevention measures.
_, WARNING: Be sure to read and understand all safety instructions in this
manual, including all safety alert symbols such as "DANGER,"
"WARNING," and "CAUTION" before using this rotary tool. Failure to follow
all instructions listed in this manual may result in electric shock, fire and/or
serious personal injury.
SYMBOL SIGNAL MEANING
_1_ SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR
CAUTION. May be used in conjunction with other symbols or pictographs.
A(_ DANGER: Indicates a hazardous situation which, if not avoided, will
result in death or serious injury. This signal word is to be limited to the most
extreme situations. Always follow the safety precautions to reduce the risk of
fire, electric shock, and personal injury.

CRAFTSMAN® THREE YEAR FULL WARRANTY
FOR THREE YEARS from the date of purchase this power tool is warranted
against any defects in material or workmanship. A supplied battery pack
or charger is warranted against such defects for one year from the purchase
date. A defective product will be replaced free of charge.

_, WARNING: Indicates a hazardous situation which, if not avoided, could
result in death or serious injury. Always follow the safety precautions to
reduce the risk of fire, electric shock, and personal injury.

For warranty coverage details to obtain free replacement,
visit the web site: www.craftsman.com
This warranty does not cover the cutting-line which is an expendable part that
can wear out from normal use within the warranty period. This warranty is void
if this product is ever used while providing commercial services or if rented to
another person. This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
Sears Brands Management
Hoffman Estates, IL 60179

CAUTION: Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
Damage Prevention and Information Messages
These inform the user of important information and/or instructions that could
lead to equipment or other property damage if they are not followed. Each
message is preceded by the word "NOTE," as in the example below:

Corporation,

NOTE: Equipment and/or property damage may result if these instructions
are not followed.
i

WARNING: Some dust created by using power tools contains
chemicals known to the State of California to cause cancer and birth defects
or other reproductive harm.

SAVE THESE INSTRUCTIONS!
READ ALL INSTRUCTIONS!

1

A_, WARNING: To ensure safety and reliability, all repairs
should be performed by a qualified service technician.
,_ WARNING: The operation of any power tools can
result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before beginning
power tool operation, always wear safety goggles or
safety glasses with side shield and a full face shield when needed. We
recommend a Wide Vision Safety Mask for use over eyeglasses or standard
safety glasses with side shields. Always use eye protection which is marked
to comply with ANSI Z87.1 shields.

I
I
I
I

PERSONAL SAFETY cont.

z_ WARNING:
if correctly used, this cordless trimmer is an easy to
handle and efficient tool; if used improperly or without the due precautions
it could become a dangerous tool. For pleasant and safe work, ALWAYS
strictly comply with the safety rules that are contained in this manual.

5. USE SAFETY EQUIPMENT. Always wear safety goggles or safety glasses with
side shields or full face shield, proper work shoes with rubber non-slip soles,
heavy-duty non-slip rubber gloves and dust mask or respirator and hearing
protection. Hard hat should be used for appropriate conditions.
6. DO NOT overreach. Keep proper footing and balance at all times. Proper footing
and balance enables better control of the tool in unexpected situations.

z_ WARNING:

BE SURE to read and understand all instructions in this
manual before using this cordless trimmer. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious personal injury.

TOOL USE AND CARE SAFETY

i

Z_ WARNING:

To avoid mistakes that could cause serious injury, DO NOT
install battery pack into this trimmer until the following instructions have
been read and understood.
WORK

AREA

Z_ WARNING:

BE SURE to read and understand atl instructions before
operating this tool. Failure to follow all instructions listed below may
result in electric shock, fire and/or serious personal injury.

SAFETY

1. ALWAYS avoid dangerous
expose to rain.

conditions.

2.

DISCONNECT the battery before making any adjustments, changing cutting
line, or storing the tool. Such preventive safety measures reduce the risk of
starting the toot accidentally.

3. ALWAYS keep bystanders and visitors at a safe distance while operating
a trimmer. NEVER allow children near the tool. Flying objects can injure
anyone in the area.

3.

STORE idle tools out of the reach of children and other untrained persons.
Children MUST NOT operate the tool. Tools are dangerous in the hands of
untrained users.

4. CHILDPROOF your tools with padlocks and master switches. Lock tools away
when not in use. This trimmer is not a toy.

4.

MAiNTAiN tools with care. ALWAYS keep cutting tools clean and in good
working order.

5. DO NOT use trimmer at night. ALWAYS make sure you have adequate lighting.

5. CHECK for misalignment
or binding of moving parts, breakage of parts, and
any other condition that may affect the tool's operation. If damaged, have the tool
serviced before using. Many accidents are caused by poorly maintained tools.

6. BEFORE using the trimmer, remove any stones, sticks, debris or objects that
could be entangled in or thrown by the trimmer.

6.

PERSONAL SAFETY
1

OBJECTS
BEING :The
THROWN,
which
can trimmer
result incan
personal
or property
/_ WARNING
operation
of any
result injury
in FOREIGN
damage. ALWAYS use proper safety equipment.

USE ONLY cutting line that is recommended for this trimmer. Cutting line that
may be suitable for one trimmer may become hazardous when used on another
trimmer.

ELECTRICAL

l

SAFETY
1

|

operating

this cordless

trimmer.

Failure to follow

all instructions

I below
Z_ WARNING:
BEshock,
SURE fire
to read
understand
all instructions
may result in
and/orandserious
personal
injury.

t. KNOW your tool. Read the operator's manual carefully. Learn the cordless trimmer's
applications and limitations, as well as the specific potential hazards related to this tool.

listed
before

A battery operated tool with integral batteries or a separate battery pack must
be recharged only with the specified charging stand for the battery pack. A
charger that may be suitable for one type of battery may create a risk of fire
when used with another battery.

2. STAY ALERT, watch what you are doing and use common sense when operating
this tool.
3.

J

1. DO NOT use the tool if switch does not turn it "On" or "Off". Any toot that
cannot be controlled with the switch is dangerous and must be repaired.

DO NOT use in wet or damp areas or

2. DO NOT operate in the presence of flammable liquids, gases, or dust.
Power tools create sparks which may ignite dust or fumes.

i

|

DO NOT use tool while tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating this tool may result in serious personal injury.

1. Use battery operated tool only with specifically
designated
Use of any other batteries may create a risk of fire.

4. DRESS properly. Wear rubber gloves and substantial rubber soled footwear when
working outdoors. DO NOT operate lawn and garden tools when barefoot or wearing
open sandals. Wear long pants and long sleeves to protect your legs and arms.
Trimmers can pick up objects such as rocks and send them flying at fast speeds.
DO NOT wear loose clothing or jewelry. Keep your hair, clothing, and gloves away
from moving parts. Loose clothing or long hair can be caught in moving parts.

2. Use battery pack only with charging

I
I
I
I

battery

pack.

stand listed.

MODEL

CHARGING

STAND

71-71816

CGT184LU-23(WA3728)

BATTERY PACK
CGT184LU-44(WA3512)

J

I
I
I
I

ELECTRICAL

SAFETY cont.

SAFETY RULES FOR CORDLESS TRIMMERS

cont.

3. Do not abuse the cord on the charger. Never carry the charger by its power
cord. Never pull the power cord to remove the charger from the power outlet.
Damage to the cord or charger could occur and create an electric shock hazard.
Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged
cords immediately. Damaged cords increase the risk of electric shock.

7. DO NOT grasp or touch the exposed cutting line when picking up or holding the
trimmer.

The label on your tool may include the following symbols.
V .....................................................................
Volts
A ....................................................................
Am ps
Hz..................................................................
Hertz
W ....................................................................
Watts
rain ................................................................
Minutes
-,....................................................................
Alternating current
................................................................
Direct current
no ...................................................................
No-load speed
[] ..................................................................
Class II construction, Double Insulated
RPM ...............................................................
Revolutions per minute
SPM ...............................................................
Strokes per minute
OPM ............................................................... Orbits per minute
Z_ ..................................................................
Indicates danger, warning or caution.
It means attention! Your safety is involved.
O
Arrows show direction objects will be
thrown by trimmer line rotation.

9. KEEP the handle dry, clean and free of oil and grease. Use a clean cloth when
cleaning. DO NOT use solvents, brake fluids, gasoline, or other petroleum
products to clean the trimmer. They can damage plastic parts.

r_l

................................................................

8. DO NOT FORCE the trimmer. Do not try to cut more than what the trimmer is
designed for. It wilt do a better job with less chance of injury when used at the
rate for which it is designed.

10. NEVER, for any reason, touch the cutting line or other moving parts during use.
11. When changing cutting line spool be careful of the line cutter on the guard. Cutter
is sharp and can cause injury (see page 17, Fig. 5a)
12. KEEP guard in place and in good working order. Keep guard positioned
between you and cutting line. Keep hands and feet away from cutting line.
13. ALWAYS store the trimmer indoors with battery pack removed when not in use. It
should be stored in a dry place, high up or locked in a place that is out of the
reach of children.
14. Cordless tools do not have to be plugged into an electrical outlet; therefore,
they are always in operating condition when the battery pack is installed.
Be aware of possible hazards when not using your battery operated tool or
when changing accessories.
Following this rule will reduce the risk of electric
shock, fire, or serious personal injury.
15. Do not place battery tools or their batteries near fire or heat. This will reduce
the risk of explosion and possible injury.
16. Do not crush, drop or damage battery pack. Never use a battery pack or
charger that has been dropped or received a sharp blow. A damaged battery
pack is subject to explosion. Properly dispose of a dropped or damaged battery pack
immediately.

indoor use only

SERVICE SAFETY
1. ff any part of this trimmer is missing or should break, bend, or fail in any
way; or should any component fail to perform properly: SHUT OFF the
power switch and remove the trimmer plug from the power source and have the
missing, damaged or failed parts replaced BEFORE resuming operation.
2. Tool service
maintenance

17. Batteries vent hydrogen gas and can explode in the presence of a source of
ignition, such as a pilot light. To reduce the risk of personal injury, never use
any cordless product in the presence of open flame. An exploded battery can
propel debris and chemicals. If exposed, flush with water immediately.

must be performed only by a qualified service dealer. Service or
performed by unqualified personnel could result in a risk of injury.

SAFETY RULES FOR CORDLESS TRIMMERS

18. Do not charge battery in a damp or wet location.
the risk of electric shock.

1. KNOW your cordless trimmer. Read operator's manual carefully. Learn the
applications and limitations, as well as the specific potential hazards related to this
tool. Following this rule will reduce the risk of electric shock, fire or serious injury

19. For best results, your battery should be charged in a location where the
temperature is more than 50°F but less than 80°F. Do not store battery outside or
in vehicles.

2. CAUTION:

20. Under extreme usage or temperature conditions,
battery leakage may occur.
if liquid comes in contact with your skin, wash immediately with soap and
water, then neutralize with lemon juice or vinegar, if liquid gets into your eyes,
flush them with clean water for at least 10 minutes, then seek immediate
medical attention. Following this rule will reduce the risk of serious personal
injury.
21. ALWAYS use only 0.065 inch (1.65 ram) spiral twisted cutting line with this
trimmer. Use of any other cutting line may create a hazardous situation.

DO NOT have the battery pack installed in the trimmer when not in use.

3. DO NOT use trimmer without adequate lighting. ALWAYS make sure that you can
see what you are trimming and edging.
4. Use trimmer ONLY when grass and weeds are dry.
5. ALWAYS remove objects such as stones, sticks, and debris from the
trimming/edging path that could become entangled in, or thrown by, the trimmer.
6. ALWAYS hold the trimmer by both the main rear handle and the auxiliary handle
for greater control and balance. NEVER reach under the safety guard.

22. ALWAYS keep ventilation openings clear of debris.

I
I
I
I

Following this rule will reduce

I
I
I
I

SAFETY

RULES

FOR CORDLESS

TRIMMERS

SAFETY RULES FOR BATTERY CHARGER cont.

cont.

23. BEFORE using the trimmer, remove any stones, sticks, debris or objects that
could be entangled in or thrown by the trimmer.
24. NYLON CUTTING LINE Keep face, hands and feet clear of rotating nylon line at
alt times.
25. THE ROTATING LINE PERFORMS A CUTTING FUNCTION. Use care when
trimming around screens and flowers and other objects that you DO NOT want
damaged or cut.
26. KEEP ALL BYSTANDERS AWAY at a safe distance from the work area,
especially children.
27. MAKE SURE that other persons and pets are at least 100 feet away.

A

CAUTION:
USE ONLY the specifically
designated battery charger
that was supplied with this trimmer when charging the battery pack. The
use of any other battery charger could damage the battery pack, and
create a hazardous condition.
Z_ CAUTION:

To reduce the risk of electric shock or damage to the
battery charger and battery pack, charge only the specifically
designated
battery pack that was included with this trimmer and charger. Charging
other types of battery packs may cause them to burst, causing personal
injury and damage.

iMPORTANT WARNING:

• Do not use the battery charger outdoors or expose to wet or damp
conditions. Water entering charging stand wilt increase the risk of electric shock.
2. Use of an attachment with this battery charger that is not recommended
may result in a risk of fire, electric shock, or injury to persons.
3. Do not abuse the cord on the battery charger. Never carry the charger by its
power cord. Never pull the power cord to remove the charger from the power
outlet. Damage to the cord or charger could occur and create an electric shock
hazard. Keep cord away from heat, oil, sharp edges or moving parts. Replace
damaged cords immediately. Damaged cords increase the risk of electric shock.
4. Make sure cord is located so that it will not be stepped on, tripped over,
come in contact with sharp edges or moving parts, heat, oil, or otherwise
subjected to damage or stress. This wilt reduce the risk of accidental falls, which
could cause injury, and damage to the cord which could result in electric shock.
5. Keep cord and charger away from heat to prevent damage to housing or
internal parts.
6. Do not let gasoline, oils, petroleum-based products, etc. come in contact
with plastic parts• They contain chemicals which can damage, weaken or destroy
plastic.
7. An extension cord should not be used unless absolutely necessary. Use of
improper extension cord could result in a risk of fire and electric shock. If an
extension cord must be used, make sure: a) That pins on ptug of extension cord
are the same number, size and shape as those on the charger, b) That extension
cord is properly wired and in good electrical condition, and c) That you use a
proper extension cord. ONLY use cords listed by Underwriters Laboratories (UL).
Other extension cords can cause a drop in line voltage, resulting in a loss of power
and overheating of charging stand. An AWG (American Wire Gauge) size of at
least 14-gauge is recommended for an extension cord of 25-ft. or less in length.
Use 12-gauge for an extension cord of 50-ft. Extension cords100-ft, or longer
are not recommended.

When this tool is being used as a trimmer or edger, stones and other
objects can be thrown out at high speed by the line. The tool and guard are
designed to help reduce the danger. However, the following special
precautions should be taken.
TO REDUCE THE RiSK of rebound or ricochet injury, always work away
from any solid objects such as walls, steps, large stones, landscape bricks,
timbers, trees, etc. Use extreme care when working close to solid objects
and when necessary edge or trim by hand.

/ik WARNING:
contain
defects

Some dust particles created by lawn and garden tools
chemicals known to the State of California to cause cancer, birth
or other reproductive harm. Some examples of these chemicals are:

* Compounds
in fertilizers, herbicides, pesticides, and insecticides.
* Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending upon how often you do
this type of work. To reduce your exposure to these chemicals:
* Work in a well-ventilated
area
* Work with approved safety equipment, such as those dust masks
that are specially designed to filter out microscopic
particles.

/_ WARNING:
NEVER reach under the trimmer (cutting line area) until
trimmer has completely stopped. The trimmer's cutting line will continue to
rotate for a few seconds after it is switched off.
SAFETY

RULES

FOR BATTERY

CHARGER

8. INSPECT tool cords for damage. Do not operate charger with a damaged
cord, which could cause shorting and electric shock. Have damaged tool
cords repaired at a qualified service dealer.
9. Do not operate charger if it has received a sharp blow, been dropped, or
other wise damaged in any way. Take it to an qualified service dealer for
electrical check to determine if the charger is in good working order.

Z_ WARNING:

READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure
to follow all instructions
tisted below may result in electric shock, fire
and / or serious personal injury.
NOTE: Before using battery charger, read all instructions and cautionary
markings in this manual, on battery charger and, battery pack, and trimmer
using battery pack, to prevent misuse of the products and possible injury
or damage.

I
I
I
I

I
I
I
I

SAFETY RULES FOR BATTERY CHARGER

cont.

1. The trimmer comes assembled except for the guard, edge guide wheels and
auxiliary handle, which must be attached.
2. Remove the trimmer, auxiliary handle, safety guard, edge guide wheels, box containing
the battery pack and charger from the carton and inspect your trimmer.
3. Do not discard box or packing material until all parts are examined.

10. Do not disassemble charger. Take it to a qualified service dealer
when service or repair is required. Incorrect reassembly may result in a risk of
electric shock or fire.
11. Disconnect charger from the power supply when not in use. This will reduce
the risk of electric shock or damage if metal items should fall into the opening in
the charger. It also will help prevent damage during a power surge.
12. Risk of electric shock. Do not touch un-insulated portion of output connector
or un-insutated battery terminal.
13. Save these instructions. Refer to them frequently and use them to instruct
others who may use this tool. If you loan someone this tool, also loan them these
instructions to prevent misuse of the product and possible injury.

ADDiTiONAL

|

l

RULES FOR SAFE OPERATION

to follow all instructions
listed below may result in electric shock, fire \
Z_ WARNING:
BE SURE
to read and understand atl instructions. Failure
and
/ or serious personal
injury.
1. ALWAYS wear safety glasses or eye shields when using this tool. Everyday
eyeglasses have only impact-resistant lenses; they are NOT safety glasses.
2. PROTECT your lungs. Wear a face mask, dust mask or respirator if the operation is
dusty.
3. PROTECT your hearing. Wear appropriate personal hearing protection during
use. Under some conditions noise from this product may contribute to hearing boss.
4. ALL ViSiTORS AND BYSTANDERS MUST wear the same safety equipment that
the operator of the tool wears.
5. ALWAYS check the tool for damaged parts. Before further use of the toot, a
guard or other part that is damaged should be carefully checked to determine if it
will operate properly and perform its intended function. Check for misalignment or
binding of moving parts, breakage of parts, and any other condition that may affect
the tool's operation. A guard or other part that is damaged should be properly
repaired or replaced at a Sears Service center.
6.

instatl the battery pack into the trimmer until the damaged part is repaired
A replaced.
WARNING:
If any part of the trimmer is missing or damaged, do not
or

Knob and Screw to
Loosen or Tighten
Handle (This knob
comes attached to
the
handle
Fig. auxiliary
1
and mounts on

M

this [rig_

'_

Battery Charger

Trimmer

Referto them frequently and
use them to instruct others who may use this tool. if someone borrows this
tool, make sure they have these instructions
also.

/

Auxiliary Handle

SAVE THESE INSTRUCTIONS.

Battery Pack
Edge Guide Wheels

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation
Safety Guard

10

11

I
I
I
I

1
|

I
I
I
I

KNOW YOUR CORDLESS

KNOW YOUR CORDLESS TRIMMER (Fig. 2)

NOTE: Before
operating
features
attempting
and safety
to use
rules.
this product, familiarize

yourself

with all

TRIMMER cont. (Fig. 2)
Trigger Switch
Handle

J

Safety "On" Button

Safety, performance and dependability have been given top priority in the design of
this product, making it easy to maintain and operate.
This Cordless
1.12-inch
2.

Trimmer

Cutting

has the following

er

Switch

features:

Path

Auxiliary Handle

2 in 1 : Trimmer and In-Line Edger with Two Wheels The cutting face can be
changed from horizontal to vertical. (i.e. For cutting edges). Pull Handle rotation
locking mechanism and turn the top of the shaft 180 ° counter-clockwise.
(The head will only move in one direction) The motor head will swivel through
180°-Release the collar and the shaft will lock-confirm secure before use!

3.18 Volt Cordless/8000

RPM (no-load

18-Volt
Battery Pack

Auxiliary Handle
Adjusting Knob

speed) for efficient trimming and edging.
Adjustable Telescopic
Top Shaft also Rotates
180 ° for Edging

4.18.0 Volt, 1.3Ah Lithium Battery Pack (No. CGT184LU=44) recharges in 3-5
hours under normal use.
5.

Charger (No. CGT184LU-23) has 1 LED light. Connect the battery charger to
the power supply and the green light will illuminate. Slide the battery pack into the
charger base to make the connections and the red light will illuminate to show
charging has started. The red light wilt switch to green, which means the battery is
full, and charging is completed. Then press the battery pack release button and
remove your battery pack. Your battery pack is now ready for use.

Top Black Locking Collar
for Adjusting Length of Shaft
Black Locking Collar
for Rotating Top Shaft 180°

6. Ergonomically Designed Rear Handle for maximum control and gripping
comfort with reduced operator fatigue.
7. Four finger Trigger Switch with Safety "On" Button.
be depressed to operate trigger switch.
8.

Safety On button must

5-Position Trimmer Head easily adjusts to the desired working angle for
optimum operator control in all trimming and edging applications. From trimming
around hard-to-reach flower beds and shrubs, to deck supports, fences and
stairways, to edging sidewalks, driveways and landscaping.

Trimmer Head
Motor
Housing

9. Edge Guide Wheels provides a cutting guide for protecting flowers, plants,
screens and fences from being cut by trimmer line.

Air

10. Adjustable Telescopic Shaft allows adjustments from 17 to 28 inches from
your ideal working height. Comfortably fits users that are 4 1/2 to 6 1/2 feet.
11. Lightweight and Ergonomically Designed
efficient trimming and edging.

Head 5-position
Adjustment Button

Safety Guard

for easy use, handling comfort and

12. Automatic Line Feed when line becomes worn, the hub will automatically
and trim a new length of line.

feed
Edge
WheelsGuide

3utting Line

13. Your trimmer uses: 0.065 inch diameter twisted line. Use Craftsman 85937
automatic feed replacement spool and line. It's factory wound for maximum
reliability.
12

13

I
I
I
I

I
I
I
I

CHARGING THE LITHIUM=ION BATTERY PACK cont. (Fig. 3 and 3a)
Cutting

Path

12 inches

Speed

8000 RPM

Rating

18.0 Volt

Line Diameter

0.085-inch twisted

Line Feed Mechanism

Automatic

Power Head Tilt

5 positions

Adjust

From 17 to 28 inches

Fig. 3

Height of Shaft

Charger

line

120V, 60Hz AC

Charge Time in Normal
Charger

Fig. 3a

Number

Battery Pack Number

Use

3=5 hours

5. The red light will switch to green, which means the battery is full, and charging is
completed. A discharged battery at normal room temperature will take
approximately 5 hours to reach full charge. When charging is completed, unplug
the charger and remove the batter pack.
6. After normal use, 3-5 hour charging time is required to fully recharge the battery
pack. If battery pack has not been charged for two or more months or completely
discharged, then it should be charged continuously for 5 or more hours.

CGT184LU-23
CGT184LU-44 retail number 73083

NOTE: Within the warranty period, if the charger LED lights do not operate
properly, or the charger does not charge the battery pack, return the
charger and battery pack to your nearest Sears Store or other Craftsman
outlet for free replacement.

CHARGING THE LITHIUM=ION BATTERY PACK (Fig. 3 and 3a)
The battery pack for this toot has been shipped in a low charge condition to prevent
possible problems.

7. The battery pack will become slightly warm to the touch while charging. This is
normal and does not indicate a problem.
8. Do not place the charger in an area of extreme heat or cold. It will work best at
normal room temperature.
9. When battery pack becomes fully charged, unplug battery charger from power
supply and remove the battery pack.

NOTE: The battery pack will not reach full charge capacity on the first few
charges. The break-in period requires 4 to 5 charging cycles, where the
battery pack is completely discharged (no motor sound or tool motion) and
then fully recharged. During the break-in period the battery pack needs to
charge 5 or more hours continuously.
The green LED light on the charger
will come on in 3-5 hours, this is normal. Continue to leave the battery pack
charging for a total of 5 hours or more. After the break-in period, a full
recharge is indicated on the charger when the green LED light is lit.

CHARGING A HOT BATTERY PACK
When using your tool continuously, the batteries in your battery pack wilt become
hot. You should let a hot battery pack cool down for approximately 30 minutes before
attempting to recharge.

1. Charge battery pack only with the charger that was supplied with this trimmer.
2. Make sure power supply to the charger is normal household voltage, 120 volts,
60 Hz, AC-onty.
3. Connect the battery charger to the power supply and the green light will illuminate
showing charger is operating.
4. Slide the battery pack into the charger base to make the connections and the red
light will illuminate to show charging has started. The red light will stay lit until the
battery is fully charged.

NOTE: A hot battery pack only occurs when prolonged continuous
use of
your trimmer causes the batteries to become hot. it does not occur with
typical use. Within the warranty period, if the battery pack becomes hot
with typical use, return the charger and battery pack to your nearest Sears
store or other Craftsman outlet for free replacement.

14

15

I
I
I
I

I
I
I
I

INSTALLING THE LITHIUM=ION BATTERY PACK (Fig. 4)

INSTALLING

THE SAFETY GUARD (Figs. 5 and 5a)

1. Remove the battery pack from the trimmer.
2. Turn the trimmer's motor housing head over to provide access to underside base
of the head by the cutting line spool.
3. Locate the single screw in the base of the head and remove the screw.
4. Insert the edge of the safety guard into the slot along the back of the trimmer's
head, carefullly lining the screw hole in the guard up with the screw hole in the
trimmer head.
5. Insert screw and securely attach the safety guard (see Figs. 5 and 5a).

1

NOTE: Safety Guard will only fit one way.

Insert the battery pack into grass trimmer's battery port. A simple
push and slight pressure will be sufficient.

z_ CAUTION:
When inserting batteries into this product, the proper
polarity or direction must be observed. Reverse insertion of batteries can
result in leakage or explosion. (Applies to product employing more than
one separately replaceable primary battery.)
NOTE: THE SAFETY GUARD MUST BE ATTACHED to the trimmer
before use.

iK WARNING:

This Cordless Trimmer is always in operating condition
when the battery pack is installed. Therefore, the Safety On Button should
always be in the released position locking the power off, when the tool is
not in use or you are carrying it at your side. The trigger switch will not
turn the trimmer ON until the Safety On Button is depressed.

iNSTALLiNG THE EDGE GUIDE
WHEELS (Fig. 6)
Your trimmer comes with a set of Edge
Guide Wheels that is handy for use as a
cutting guide. It can be used to help keep
the cutting line away from items you
don't want cut, such as flowers, or
damaged, such as fences or screens.

Z_ WARNING:
To avoid injury, ALWAYS remove the battery from the
trimmer BEFORE installing parts, cleaning the trimmer, making any
adjustments or storing the trimmer

Each end of the wheel assembly guide
is secured in its position on the motor
housing with two screws, included, see
Fig. 6. Check Edge Guide Wheels to
make sure they are properly located
and secure.

16

17

I
I
I
I

head

1
|

J

I
I
I
I

ATTACHING THE AUXiLiARY

[

NOTE: THE AUXiLiARY
before use.

HANDLE (Fig. 7 and 7a)

HANDLE MUST BE ATTACHED to the trimmer

ADJUSTING
shaft

1. Remove the battery pack from the trimmer.

[

Z_ WARNING:

To avoid injury, ALWAYS remove the battery from the
trimmer BEFORE installing parts or cleaning the trimmer or making any
adjustments.

2•

]

THE HEIGHT (Figs. 8 and 8a)

The Tdmmer's Telescopic
Shaft Comes in the Collapsed
Position

Fig. 8

• To raise the telescopic shaft,
twist top collar
(counterclockwise) to
unlock, and pull (extend)
top of shaft up, to desired
height•

]

Unscrew the auxiliary handle's tightening knob
(counterclockwise) and remove from handle.

2. Twist top collar (clockwise)
to lock top shaft in place.

3. Position auxiliary handle onto handle bracket
assembly located on trimmer shaft (see Fig. 7).

3. To lower or collapse the
shaft simply reverse the
above steps, 1 and 2.

4. Position the knob and screw through the auxiliary
handle and bracket, and tighten knob
(turn clockwise). Do not tighten completely until you
have adjusted the handle to your desired working
position.

ADJUSTING

Top
Collar
Bottom
Collar

Bottom
Collar

THE CUTTING ANGLE (Fig. 9)

Your trimmer has a 5-position tilting head that easily adjusts to the desired working
angle for optimum operator control and comfort. To adjust the trimmer head angle.
1. Remove the battery pack from the trimmer.
2

trimmer BEFORE installing parts or cleaning the trimmer or making any
[ adjustments.
z.4X WARNING:
To avoid injury, ALWAYS remove the battery from the
Press the red trimmer head adjustment
button on the motor housing (see Fig. 9).
3. Move the trimmer head to one of the five
different angles and release the button.
Head wilt click into position. Easily
readjust the angle to a more efficient
position as needed.

i

2•

ADJUSTING

THE AUXiLiARY

HANDLE (Fig. 7a)

Z_ WARNING:

1

//

BEFORE

j/_

, 2

-/z

JJ

is,

j/

J'

..........
'i..........................

Trimmer Head

connecting the battery pack to your
trimmer, BE SURE you are not
pressing in on the trigger switch.
Failure to do so could result in
accidental start-up, which may
cause serious personal injury.

1. The auxiliary handle's bracket can be moved up or down on the shaft and the
auxiliary handle itself can be moved forward or backward into 4 different locked
positions (see Fig. 7a).
2. When the handle is in desired position, turn knob and tighten securely.

z_

WARNING:
To avoid injury, adjust the auxiliary handle for maximum
control and balance. DO NOT overreach when operating the trimmer.
ALWAYS KEEP proper balance for better control of the tool in unexpected
situations.

z_ WARNING:
instatl
the battery

18

If any until
part the
of the
trimmer part
is missing
or damaged,
do not
pack
damaged
is repaired
or replaced.
19

I
I
I
I

J

I
I
I
I

m__

TO USE TRIMMER FOR EDGING:
ROTATE REAR HANDLE AND UPPER SHAFT 180 °
(Figs. 10, 11, 11a and 11b)

TRIMMING AND EDGING (Figs. 13 and 14)
When trimming, cut from left to right for cutting efficiency; this throws the clippings
away from the operator (Fig. 13).

1. Remove the battery pack from the trimmer.
2. Putt bottom collar down and rotate top shaft,
rear handle (and auxiliary handle) 180 °

trip,Use
as '4:_'

3. Release bottom collar to lock shaft in place.

To edge, rotate the shaft 180 ° (See Page 20, Figs. 11 and 11a). Place edge guide
wheels and trimmer head above the surface you are going to edge, as shown in Fig. 14.

',
\ii'
=

_S
Fig. 13

(/

Useas a
Fig. 11

Fig. 11b
Use as
edger

trimmer

Gloves

Fig. 14

\

S

Use as a
edger

"
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 15
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Fri Sep 12 07:06:51 2014
Author                          : 
Title                           : 
Subject                         : 

EXIF Metadata provided by EXIF.tools