Craftsman 257797901 User Manual ELECTRIC WEEDWACKER Manuals And Guides L0707278
CRAFTSMAN Line Trimmers/Weedwackers, Electric Manual L0707278 CRAFTSMAN Line Trimmers/Weedwackers, Electric Owner's Manual, CRAFTSMAN Line Trimmers/Weedwackers, Electric installation guides
User Manual: Craftsman 257797901 257797901 CRAFTSMAN CRAFTSMAN ELECTRIC WEEDWACKER - Manuals and Guides View the owners manual for your CRAFTSMAN CRAFTSMAN ELECTRIC WEEDWACKER #257797901. Home:Lawn & Garden Parts:Craftsman Parts:257797901 Craftsman Grass trimmer (weed wacker) Manual
Open the PDF directly: View PDF 
.
Page Count: 6
[Searsj
owner's
manual
MODEL NO.
....25Z797901 ........
CAUTION:
Read RULES for
Safe OPERATION
and INSTRUCTIONS
Carefully
CRAFTSMAN<
ELECTRIC WEEDWACKER
BLADELESS GRASS TRIMMER
DOUBLE INSULATED
*Assembly
'= Operating
• Repair Parts
Sold by SEARS, ROEBUCK AND CO,[_ieago , _{.600B:¢:_0.iA,:I:.
and SIMPSON-SEARS .LIMITED, To_n:iO;iO_t_io, Can_a__ ':: :'
R0478
f
iMPORTANT: rules for safe.operatien
•_ iiiiiiii i i _ i i
DOUBLE INSULATION
.... Double Insulation is a concept in safety, replacing the stan-
dard grounded supply system, in electric power tools. The
construction of adouble insqtated tool affords compatible
protection to aproperly grounded toot without the necessity
for using a grounded conductor. The double insulation
system eliminates the need for the usual three wire grounded
power cord and grounded supply system. Wherever there is
electric current in the tool there are two complete sets of
insulation to protect the user. All exposed metal parts'are
isolated from the internal metal motor components with pro-
tecting insulation. The lead wires, switch, etc. with their
•functional insulation have the added protection of non con-
ductive sleeving or housings to complete the double insula-
tion system.
SAFETY RULES FOR POWER TOOLS
SERVICING OF A TOOL WITH DOUBLE INSULATION RE- 9.
QUIRES EXTREME CARE AND KNOWLE-_OGE OF T.._ SYS- 10.
TEM AND SHOULD BE PERFORMED ONLY BY A QUALI_ "11.
FlED SERVICE TECHNICIAN. FOR SERVICE WE SUGGEST 12.
YOU RETURN THE TOOL TO YOUR NEAREST SEARS
STORE FOR REPAIR WHICH VVlLL BE DONE WITH
ORIGINAL FACTORY REPLACEMENT PARTS.
SUB-FREEZING TEMPERATURES de-magnetizes the per-
manent magnets when in operation. Do NOT operate in 13.
freezing temperature.
i
CAUTION
]. Keep fingers and feet and face ciear of fine while cutting.
2. Use Safety Goggles.
3. Always wear shoes. Do not operate trimmer while bare- i
foot or .when wearing sandles, canvas or open toed
shoes.
4. Keep Children Away. Keep spectators at a safe distance.
5. Do net #llow anyone who is not familiar with these rules
to use the trimmer, i
6. Do not use trimmer as a hedge trimmer, i
7. Store indoors in a dry, high, or fock-up place out of reach i
of children.
8. Don'z force this tool. It will work better and safer at the I
rate it was designed. If motor slows down too much, pull l'
away. J
Maintain tdmmer with care. ,
Do not immerse tool in water or operate in rain. J
Always unplug cord when _ool is unattended ..... f
To prevent shock hazard use only a U.L Approved ex- t
tension cord suitable for outdoor use. A two wire cord i
without a ground connection may be used since this tool
is double insulated. Cord should be t8 gauge or heavier.
More than 100 feet may cause slight loss of power_ U_L
Listed cords are available at local Sears Stores.
Avoid DangeroUs Environment--Do not use this unit in
damp or wet areas.
• L
,x
J iil,,i, ii iiiiiiii iiiii ii iii i iiii ii1,1 iiiiiiiii i i i i
',•,7 J
The operation of an,/power tool can result in foreign objects being
thrown into the eyes; which can result in severe eye damage.
Always wear safety glasses or eye shieids before commencing
power tool operation. We recommend Wide Vision Safety .Ma_k
for use over spectacles, or s'(andard safety glasses.., available ,_t
Sears retail or catalog stores. ' ".
FORESIGHT IS BETTER THAN NO SIGHT.
Page2
ASSEMBLY
ASSEMBLY INSTRUCTIONS
Remove tdmmer from carton and examine it thoroughly to
make sure it is not damaged.
ATTACHING THE "D" HANDLE
Attach the "'D'" handle to the upper handle tube before joim
ing the two sections of the tube (see figure 1).
1. Remove the wing nut and bolt from the "'O'" handle.
2. The wire that is exposed between the two sections of
the handle tube will now pass through the slot in the
bottom of the "D" handle.
3. Slide the "D'[ handle up onto the upper tube.
4. Place the bolt into the "D" handle and tighten the wing
nut. If the "D" handle is propedy mounted, the wing
nut will be on the left from the operator's point of view.
5. Complete assembly of the handle tube as shown under
"Assembly Instructions" (figure 2).
6. Insert the screws into the ha_d.le tube. &nd t_hte.q.
7_ Adjust position of "D" handle to conform to height and .
arm length.
WARNINGS
Proper Line Length - Do not allow line to extend beyond the
recommended line length of 5 5/8'" from outer edge of rotary
• head. Longer line wilt overload and overheat motor.
Operating instructions
FIG. 1
FIG. 2
BEFORE OPERATING
Before Using Your WEEDWACKER, Always Follow These
Safety Precautions:
Always wear SAFETY" GOGGLES.
Cut to your LEFT side.
Keep people away from you.
Watch for piecesof wire in the area.
• Tie extension cord to appliance cord (figure 3).
HOW TO OPERATE
YOUR WEEDWACKER IS ONE OF THE SAFEST LAWN
CARE TOOLS (motor driven) BEING PRODUCED TODAY.
HOWEVER, DON'T GET A FALSE SENSE OF SAFETY IN
USING IT. USE NORMAL SAFETY PROCEDURES AS
OUTLINED ABOVE AND GOOD COMMON SENSE.
Retaining Extension Cord
To prevent extension cord from pulling out from appliance cord,
tie cords as shown in figure 3,
I. The WEEDWACKER will stir up dust particles which may
get into your eyes, Wear,safety goggles to prevent this..
•When _/ou cut to the LEFT SiDE of your WEEDWACKER,
it will sling particles FORWARD_ away from you. When you
cut to the RIGHT SIDE, it will sling particles BACK towards;-
you. ALWAYS CUT TO THE LE_..:SIDE ONLY. :
2, Your WEEDWACKER can sling qbjects with adequate veloqi,'_
to eause harm to others. Itwill ALWAYS sling small partic!_s;
of dirt. KEEP PEOPLE AWAY FROM YOU when using yo_ir.,
•WEEDWACKER just tO be safe.
3. Insp'ect the areas you are goingtotrim forwires, cord, andany
strlng-like matter to prevent them from getting tangled in
the cutting head.
,,,_ .......... ,L u,,=l,,= =l i= ,=
EXTENSION APPLIANCE
'CORD .CORD
•FIG. 3 (A} TIE CORD
r," r_ _S SHOWN
MODEL NO. 257.79"7901 CRAFTSMAN WEEDWACKER
Repair Parts
4O
39
\
30-
SECTION
'A
•,= = = i1= ii = = =11 iii i iii1= = J ljlq|=l_ H i _ =ill J=ira=
MODEL NO. 257.797901
:pARTS L!ST FOR CRAFTSMAN WEEDWAGKER
PARTS LIST
CRAFTSMAN WEEDWACKER
MODEL NO. 257.797901
KEY PART
NO. NO. DESCRIPTION OTY, DESCRIPTION QTY.
t.1 1924-42
2, 1930-1
3. t2181
4, _, 2827-02
5. _ I"437
6. 2225
7, i2232
•8. 2821-02
9. 2233-25
10. 2231-05
11. 2245
:12.. 2229"05
I3. 2234"05
15. 2287
16..... 2276
17. ,2137
18. 2286
l& _2285
20, 2389-3
21. 2270.1
21A 2467
Handle, R,H, and L.H.
Switch, Trigge r
Bolt, Hex Hd. I/4-20 x4
Side Handle
!: __WJngNut, 1/4-20.
"Tube, Handle,.Upper
Tube, Handle, Lower
Housing, L.H. and R. H;
S_eeve, D riveAdapter
Housing, Heed
Line Saver
Spool & Line (85774)
Ball Lock
_rew, Pan Hd., 10-32 x 3-t/8
End Bell, ,Output
Bearing, Self Align
Oiler, Felt, Bearing
Retainer, Bearing
Washer, Load
FieldAssembly
Retainer Ring
I
1
1
1
1
1
I
!
!
2
1
1
2
''2
2
2
1
!
1
22, 2251-t
23. 747-2
24. 2288
25, 2275
28, 2260
27, 2278
2B. 2280
29. 2277
30 2250-!
3t!. 1622-05
32, 1946-2
33. 2224
34. 97-I !
35, f7t3
36. 1624
39, 1938
4& 2345
411. 2780
42 88-0i7-1
Armature 1
Retainer Ring I
Washer, Thrust 2
End Bell, Brush 1
Insulator 1
Brush 2
Spring, Brush, Constant Load 2
Holder, Brush 2
Motor, Complete t
Blade Retainer !
Blade, Line Cutter 1
Screw, Pan Hd !0-16 x 1 6
Screw, Hex Hd, Tapping #10 × 3/8 2
Washer, Spring Lock #10 size (131096) 2
Harness 1
Screw, Pan Hd Hi-Lo, 8-18 x 5/8 6
Power Cord 1
Rectifier 1
Owners Manual (Not shown)
tD_notes standard hardware item - may be purchased locally
"A" - Parts listed in this assembly are s_own in the exploded view as Key n_mbet's tSithrough 29 and represent an important part of the
Double Insulated Safety System, To avoid the possibility of alteration or damage to thelSafety System, service requiring these parts should
.be. performed by aqualified service technician. Service required on these parts should be performed by your nearest Sears Electric Motor
Shop. Contact your nearest Catalog Order House or Retail Store for servicing of any parts shown in Section "A".
J
_.L.. II Illll I IJ ILLJ._ .Illl Il! III *... ....... .... J . .-- .......................... I.... .. I = : ;_-
owner's
manual
MODEL NO.
257.7979O1
Sears
NATIONWIDE
SERVICE
•is at
YOUR SERVICE.
;"f
How to Order Repair Parts
The Model Number will be found on a plate attached to your
Weedwacker handle tube. Always mention the Model Num-
ber when requesting service or repair parts for your Craftsman
Weedwacker.
All parts listed herein may be ordered from any SEARS,
ROEBUCK AND CO. or SIMPSONS-SEARS LIMITED retail
or catalog store,
WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE
FOLLOWING INFORMATION:
1. PART NUMBER
2. PART D_-%C_JPT!ON
.... 3. MODEL NUMBER -_ 257.797901
4. NAME OF ITEM -- ELECTRIC BLADELES$ GRASS
TRIMMER DOUBLE INSULATED
If the parts, you need are not stocked locally, your order will
be electronically transmitted to a Sears Repair Parts Distri-
bution Center for expedited handling,
"Your Sears merchandise hasadded value when you consider that Searshasservice
units ,'_ationwide ._._3d with Sears _ained technicians.. :professional technicians
specifically trained on Sears products, having the parts, tools and equipment to
insure that we meet our pledge to you .... we servicewhat we sell."
il FIjLL ONE YEAR WARRANTY ON CRAFTSMAN _ _
GRASS TRIMMER257.797901 _._
ilf..thls Electric Weedwacker failS-to perform propedy due to adefect in _
._ material or workmanship within one year from the date or purchase, 4
_Sears will repair it, free of charge.
;_ If this Electric Weedwacker is used for commercial or rental purposes, 4<_
_this warranty appliesfor onty 90 days from the date of purchase. 4
*I' Warranty service is availableby Simplyconta_.'ling the nearest Sears 4 •
_: store or Service Center throughout the United States. _ _
•_* This warranty gives you specific legal rights, and you may also have _
._, other rights which vary from state to state.
_: L • SEARS, ROEBUCK AND CO. :i:
_,•". :Sears Tower ;_;
: • : -Chicago, IL 60684 ;_;
Sold by SEARS, ROEBUCK AND CO., Chicago, IL. 60684 U.S.A.
"and SIMPSONS'SF-_RS:ILIMITED, Toron_o;OIithriO, Canada.
