Craftsman 315114520 User Manual DRILL DRIVER Manuals And Guides L0306138
CRAFTSMAN Drill Driver Manual L0306138 CRAFTSMAN Drill Driver Owner's Manual, CRAFTSMAN Drill Driver installation guides
User Manual: Craftsman 315114520 315114520 CRAFTSMAN DRILL-DRIVER - Manuals and Guides View the owners manual for your CRAFTSMAN DRILL-DRIVER #315114520. Home:Tool Parts:Craftsman Parts:Craftsman DRILL-DRIVER Manual
Open the PDF directly: View PDF .
Page Count: 18
Download | ![]() |
Open PDF In Browser | View PDF |
_l, Ryobi !I I Operator's Manual I:RRFTSMRN'I 318 in. CORDLESS DRILL-DRIVER Variable Speed / Reversible Model Nos. 315.11452012 Volt 315.114530 - 14.4 Volt Save this manual for future reference WARNING: ToreducetheriskofInjury,the user must read and understand the operator's manual before using this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Visit the Craftsman web page: www.sears.com/craftsman 983000-182 2-03 Estates, IL 60179 USA 0( us • Table of Contents ........................................................................................................................................................... 2 • Warranty ......................................................................................................................................................................... 2 • Introduction ..................................................................................................................................................................... 3 • General Safety Rules, Specific Safety Rules, and Symbols ...................................................................................... • Product Specifications • Features ..................................................................................................................................................................... • Operation .................................................................................................................................................................. • Malnterk_nos ................................................................................................................................................................. 15 • Aosessorles 15 • Exploded View and Repair Parts List ........................................................................................................................... 17 • Parts Ordering / Servlos ............................................................................................................................................... 18 3-6 .................................................................................................................................................... 7 7-8 9-14 .................................................................................................................................................................. FULL ONE YEAR WARRANTY ON CRAFTSMAN 3/8 in. CORDLESS DRILL-DRWER ff this [RRFTSNRN 3/8 in. Cordless DdlI-Ddver falls to give complete satisfaction within one year from the date of purchase, RETURN IT TO THE NEAREST SEARS STORE OR SEARS SERVICE CENTER IN THE UNITED STATES, and Sears will repair it, free of charge. ffthis I:IIRFTSNRN 3/B In. Cordless DrllI-Drlvar Is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co., Dept. 817WA, Hoffman Eatates, IL 60179 _1= Look for this symbol to point out Important attention!!! Your safety is involved, safety precautions. It means AWARNING: O The operation of any powertool can result In foreign objectsbeing thrown Into your eyes, which can result Insevereeye damage, Beforebeginning powertooloperation, alwayswear safety gogglesor safety glasseswithsideshields and a full faceshleld when needed.We recommend Wide Vlslon SafetyMask foruse overeyeglasses orstandardsafety glasseswlthsldeshlelds, available atSears Retail Stores. Alwayswear eye protection whichismarkedtocomplywlthANSI Z87.1, SAFETY AND INTERNATIONAL SYMBOLS This operator'smanual describes safety and Internatloeal symbolsand pIctographsthat may appear on _his product, Read the operator'smanual for complete safety, assembly, operatingand mainter_nce, and repair information, MEANING Do not expose to rain or use in damp locations. Your drill-driverhas many features for making yourdrilling operationsmore pleasant and enjoyable. Safety, performanceand dependabilityhave been given top priorityin the design of this drill-drivermaking it easy to maintain and operate. _kWARNING: Reed and understand all Inatructlons. Failure to follow all instructionslistedbelow, may resultin electric shock,fire and/or seriouspersonal Injury. WARNING: Do not attempt to use this product until you read thoroughly and understand completely the operator's manual. Pay close attention to the safety rules including Dangers, Warnings and Cautions. If you use this pn:x:lustproperly and only as Intended, you will enjoy yearn of safe, reliable service, Personal Safety • SAVE THESE INSTRUCTIONS Work Area • Keep your work area clean and well lit. Cluttered benches and dark areas Invite accidents. Do not operate power tools in _ploafve atmospheres, such as in the presence of flammable liquids, gases, or duet. Power tools create sparks which may Ignite the dust or fumes, • Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control • • • Remove adjusting keys or wrenches before turning the tool on, A wrench or a key that Is left attached to a rotating part of the tool may result in personal Injury, • Do not overreach. Keep proper footing and balance at all tlmee. Proper footing and belanos enables better centre1 of the tool in unexpected situations. Do not use on a ladder or unstable support, • Use safety equipment. Always wear aye protection. Dust mask, nonskid safety shoes, hard hat. or hearing protection must be used for appropriate conditions, Electrical Safety • • Do not abuse the cord. Never use the cord to carry the charger. Keep curd away from heat, o11,sharp edges, or moving parts. Replace damaged cords Immediately. Damaged cords may create afire. A battery operated tool with Integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a dsk of fire when used with another battery. Use battery only with charger listed. MODEL BATTERY PACK CHARGING ASSEMBLY 315.114520 ITEM NO.S 11057 ITEM NO. _)11055 (1322549) (1425004) 315,114530 ITEM NO. it 11044 ITEM NO. _ 11041 (1322522) (1425301 ) Use battery operated tool only with specifically designated battery pack. Use of any other batteries may create a risk of fire. Use only with battery pack listed, Stay alert, watch whet you are doing and use common sense when operating a power tool. Do not use tool while tired or under the Influence of drugs, alcohol, or medication. A moment of inattention while operatingpower toolsmay result In serious personal Injury. Dress propedy. Do not wear loose clothing or Jewelry.Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long haircan be caught In moving parts Avoid accidental starting. Be sure switch Is In the locked or nff position b_ore Inserting battery pack. Carryingtoolswith yourfinger on the switchor insertingthe bat:terypack intoa tool with the switchon, Invitesaccidents Tool Use and Care • • • • • • Use clamps or other practical way to secure and support the workplace to a stable platform. Holding the work by hand or against your body Is unstable and may [sadto loss of control. Do not fame tool. Use the correct tool for your application. The correcttool will do the job Petterand safer at the rate for which it is designed. no not use tool if switch does not turn it on or off. A tool that cannot be controfled with the switchis dangerousand must be repaired. Dlsconnentbattery'pack from tool or placethe switch in the locked or off pnelion beforemakingany adjustmerits, chenglng accessories,or ,_odug thetooL Such preventives,_etymeasuresreduce_k of maz_r_thet_x_ accidentally. Store Idle tools out of reach of children and other untrained persons. Tools aredangerousinthe hands of untrained users. When battery pack Is not In use, keep it away from other metal objects like: pager clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terrnlnal to another. Shafting the battery terminals together may cause sparks, burns,or a fire. • • • Maintain tools with care. Keep cutting tools sharp and clean. Properlymaintainedtools, with sharp cuttingedges are less I[keiyto bind and are easier to control. Check for mlulignment or binding of moving pads, breakage of parts, and any other condition that may _fect the tool's operation"If damaged, have the tool serviced before using. Many accidents are caused by poodymaintainedtools. Use only aecesserles that are recommended by the manufacturer for your model. Accessoriesthat may be suitablefor one tcol, may create a risk of injury when used on anothertool. Service • • Tool servile must he pedormnd only by qualified repair personnel. Service or malntenanse performed by unqualified personnel could result in a ask of injury. When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury, Hold tool by insulated gripping sudaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator, Additional • • For Safe Operation Know your power tool. Read operator's manual carefully. Learn Its applications and limitations, as well as the specific potential hazards related to this tool. Following this rule will reduce the risk of electric shock, tim, or serious Injury. Make sure your mdension cord is in good condition, When using an e0dension cord, he sum to use one heavy enough to carry the cutrerd your product will draw. A wire gage size (A.W.G,) of at least 16 Is recommended for an extension cord 100 feet or less In length. A cord exceeding 100 feet Is not recommended. If in doubt, nee the ne0d heavier gage. The smaller the gage number, the heavier the cord. An undersized cord will cause a drop In line voltage resulting in loss of power and overheating. Important • Rules Rules for Battery Tools Battery tools do not have to be plugged Into an electrical outlet; therefore, they are always in operating condition" Be aware of possible hazards when not using your battery tool or when changIng accessories. Following this rule will reduce the risk of electric shock, fire, or serious personal Injury. • • • • • Do not place battery tools or their batteries near fire or heat. This will reducethe risk of explosion and possible Injury. Bettedesvent hydrogengas and can explode in the presenceof a sourceof Ignition, such asa pilot light. To reduce the risk of sedous personalinjury, never use any cordless productIn the presence of open flame. An exploded battery can propeldebris and chemicals. If exposed, flushwith water Immediately. Do not charge battery tool In a damp or wet location. Followingthis rulewill reduce the dsk of electdc shock. For best rexuits, your battery tool should be charged In a location where the temperature is more than 50°F but less than IO0°F. Do not store outside or In vohlclex. Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes In contact with your skin, wash Immediately with soap and water, then neutralize with lemon juice or vinegar. If itquld gets into your eyes, flush them with clean water for at least 10 minutes, then seek Immediate medilal attention. Followingthis rule will reduce the dsk of seriouspersona.I Injury. • Neverusea battery that has been dropped or received a sharp blow. A damaged battery Is subjectto explosion, Properlydispose of a dropped battery immediately.Failure to heed this warning can resultIn serious personal injury. • Do not operate charger I! It has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. FolioNIng this rule will reduce the risk of electric shock, fire, or sedous personal Injury. • Before using battery charger, read all instructions and cautionary markings In this manual, on battery charger, and product using battery charger. Followingthis rule will reduce the risk of electric shock,fire, or serious personal Injury, • • To reduce risk of injury, charge only nickelcadmium and nickel metal hydride type rechargeable batteries. Other types of batterlse may burst causing personal injury and damage. Followingthis rule will reducethe risk of electric shock,fire, or serious persona] Injury. Do not disassemble charger;, take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result In a dsk of electdc shock or fire. FollowLnclthis rule will reduce the risk of electric shock, fire, or serious personal injury. • To reduce the dsk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. Turning off controls will not reduce this risk. Following this rule will reduce the risk of electric shock, fire, or serious personal Injury. • Do not use charger outdoors. Following this rule will reduce the risk of e]ectrlc shock, fire, or serious personal Injury. • Disconnect charger from power supply when not in use. Following this rule will reduce the risk of electdc shock, fire, or serious personal Injury. • RISK OF ELECTRIC SHOCK. DO NOT TOUCH UNINSBLATED PORTION OF OUTPUT CONNECTOR OR UNINSULATED BAI"rERY TERMINAL. • • Do not expose charger to rain or snow. Following this rule will reduce the dsk of electric shock, fire, or serious personal Injury. Use of an attachment not recommended or sold by the baUery charger manufacturer may result In a risk of fire, electric shock, or Injury to persons. Following this rule will reduce the risk of electrlc shock, fire, or serious personal Injury. • • • To reduce riskof damagers charger body and cord, pull by charger plug rather than cord when disconnecting charger. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. Make sure cord Is located so that It will not be stepped on, tdpped over, or otherwise subjected to damage or stress. Following this rule wilFreduce the risk of serious personal injury. An extension cord should not be used unless absolutely necessary. Useof Improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure: a. That pins on plug of extension cord are the same number, size and shape as those of plug on charger. b. That extension cord is properly wired and In good electrical condition; and c. That wire size Is large enough for AC ampere rating of charger as specified below: Cord Length (Feet] 25' 50' 100' Cord Size (AWG) 16 16 16 Note: AWG = American Wire Gage • Do not operate charger with a damaged cord or plug. ff damaged, have replaced Immediately by a qualified serviceman. Following this rule will reduce the risk of electric shock, fire, or serious personal Injury. Save these Instructions. Refer to them frequently and usa them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also. Followingthis rule will reduce the risk of electricshock, fire, or serious personal Injury. _kWARNING: Some dust created by power sanding, sawing, grinding, drilling,and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • lead from lead-based paints, • crystalline silica from bricks and cement and other masonry products, and • arsenic and chromiumfrom chemicallytreated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME D ESIG NATION/F..X PLAN ATIO N V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) min Minutes Time Alternating Current Type or a characteristic of currant --= D]rect Current Type or a charautadstic of current no No Load Speed Rotational speed, at no load Revolutions or Reciprocation Per Minute Revolutions, strokes, surface speed, orbits etc. per minute Safety Alert Symbol Indicates danger, warning or caution. It rn_ans attention!l! Your safety is Involved. .../rain Wear Eye Protection O glasssswlth side shleldsand a full face Always wear safety goggles or safety shield when operating this product. The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The Instructions or warnings they give are nct substitutes for proper accident prevention measures. Symbol A A A NOTE: Meaning DANGER: Indicates an imminentlyhazardous situationwhich, If not avoided, will result In death or sedous injury. WARNING: Indicates a pcXentlally hazardous situation which, if not avoided, could result in death or sadous Injury. CAUTION: Indicates a botentlally hazardous situation which, If not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices that may cause property damage. Advises you of information or instructions vital to the operation or maintenance SAVE THESE INSTRUCTIONS of the equipment. DRILL-DRIVER Chuck Motor Gear Train Switch No Load Speed Clutch Maximum Torque CHARGING ASSEMBLY Rating Charging Voltage Charge Rate BATTERY PACK • Craftsman 315.114520 3/8 In. Keyless DC Motor 12 Volt Two Speed Variable Speed 0-300 RPM (Low) O-1000 RPM (High) 24 Positions 225 In,lb. Item No. =11055 (1425004) 1 20 V, 60 Hz, AC only 12 Volt 3-6 Hours Item No. !11057 (1322549) 315.114530 3/8 in. Keyless DC Motor 14.4 Volt Two Speed Vadabls Speed 0-400 RPM (Low) 0-1400 RPM (High) 24 PoslUons 275 In,lb. Item No. !11041 (1425301) 120 V, 60 Hz, AC only 14.4 Volt 1 Hour Item No. !11044 (1322522) EX 114520 - 12V test criteda 225 280 150 In,]b. torque #5 x 1,25 in, wood screws In low speed per battery pack charge Into pine lumber. 3/8 In. diameter holes par battery pack charge into 2 in. nominal pine lumber, Craftsman EX 114530 - 14.4V test criteria 275 I in,lb. torque 170 220 I 3/8 diameter holes per battery peck cherge Into 2pack In. nominal lumber. #8 xIn, 1.25 in. wood screws In low speed per battery charge pine Into pine lumber, KNOW YOUR DRILL-DRIVER See Figure 1. Before attempting to use your drill-driver,familiarize yourselfwith all operating features and safety requirements. KEYLESS CHUCK Your drill-driverhas a keylesschuck that allowsyou to hand tighten or release drillbit Inthe chuckjaws, SWITCH To turn your drill-driverON, depressthe switchtrigger, Release switchtriggerto turn your drill-driverOFF. SWITCH LOCK The switch trigger nan be lockedin the OFF position.This feature helps reduce the possibility of accidental starting when not In use, VARIABLE SPEED This tool has a variab[e speed switch that delivers higher speed with Increased tdgger pressure. Speed is controlled by the amount of switch trigger depression. TWO SPEED GEAR TRAIN Your drill-driver has a two speed gear train designed for drilling or driving at HI or LO speeds. A slide switch is located on top of your drill to select either HI or LO speed, FORWARD/REVERSE SELECTOR (DIRECTION OF ROTATION SELECTOR) Yourdrill-driverhas a forward/reverseselectorlocated above the switch trigger. WRIST STRAP A wrist strap is provided to reducethe chances of dropping your dril!-driver,Place one handthrough the wdststrap when carryingtool. BIT STORAGE When not In use, bit(s) providedwith your drill-drivercan be placed In the storage area located on the bottomof the motor housing. LEVEL To keep drill bit level duringddlllngoperations,a level Is locatedon the back of the motorhousing. ,_ WARNING: ff any partsate missing,do not operate yourdrill-driveruntil the missingpartsare replaced. Failureto do so couldresultIn possiblessdous personal Injury. TWO-SPEED GEARTRAIN(HI&O) LEVEL TORQUE ADJUSTMENT RING KEYLESS CHUCK BATFERYPACKSHOWN IN CHARGING STAND CHARGER REARVIEW DIRECTION OF ROTATION SELECTOR (FORWARD/REVERSE) SWITCH TRGGER RED UGHT (LED) SCREWDRIVER BATTERYPACK SHOWN DIT STORAGE CHARGERSTAND 315,114520 BATTERY PACK SHOWN IN CHARGER WRIST STRAP CHARGER 315.114530 4-1/2In, ' CYCLE,INDICATESFULLYCHARGEDBA'n'ERY PACK ANDIN TRICKLE CHARGEMODEL YELLOWAND GREENLEDSON INDICATESDEEPLY DISCHARGEDOR DEFECTIVEBATTERYPACK. 8 Fig. 1 _ _ WARNING : Always wear safety gogglesor safety glasses with side shields when operatingtools. Failure to do so could result In objects being thrown intoyour eyes, resultingin possible sedousinjury, WARNING: 0o not allow famillahtywith yourdrilLdriver to make you careless, Remember thet a careless fraction of a second Is suffic[ertto inflict severe injury, BATTERY PACK (MODEL 315.114520) The battery pack for your tool has been shipped in alow charge condition to prevent possible problems. Therefore, you should charge It overnight prior to use, Note; Batteries will not reach full charge the firs[ time they are charged, Allow several cycles (drilling followed by recharging) for them to become fully charged, CHARGING BATTERY PACK (MODEL 315.114520) See Figure 1. • Charge battery pack only with the charging assembly provided. • Make sure power supply Is normal household voltage, 120 voits, 60 Hz, AC only. • Connect charger to power supply, • Place battery pack in charging stand, Align raised fib on battery packwlth groove [n charging stand. See Figure 1. • Press down on batte_ pack to be sure contacts on battery pack engage properly with contacts In charg]ng stand. The charge Indicator light (LED), located on the charging stand, will light up red and glow when the charger is properly connected to power supply. This light Indicates the charger is operating properly, It w]ll remain on until battery pack Is removed from charging stand or charger is disconnected from power supply, • Note: If charger does not charge battery pack, return battery pack and charging assembly to your nearest Sears Repair Center for electrical check. • After normal usage, a 3 hours or less of charging time Is required to fully recharge battery pack, Note: If battery pack Iscompletely discharged, 6 hours or longer of charging time Is required to fully recharge battery pack, • The battery pack wl[I become slightly warm to the touch while charging. This is norn'_l and does not Indicate a problem, • 0o not place charger in an area of extreme heat or cold, It will work best at normal room temperature, • When batteries become lully charged, unplug charger from power supply and remove the battery pack. IMPORTANT INFORMATION HOT BATTERIES FOR RECHARGING (MO DEL 315.114520) When usLng your your battery pack battery pack cool before attempting drill-driver continuously, the batteries in will become hot. You should let a hot down for approximately 30 minUtes to recharge. Note: This situation only occurs when continuous use of your drill causes the batteries to become hot. It does nat occur under normal circumstances. Refer to "CHARGING BATTERY PACK" for normal recherglng of parterres. If the ch_ging assembly does nat charge your battery pack under normal circumstances, return both the battery pack and charging assembly to your nearest Sears repair center for electrical check. A LED FUNCTIONS OF CHARGER LED WILL BE ON TO INDICATE STATUS OF CHARGER AND BATTERY PACK: (MODEL 315.114520) WARNING: Do not allow familiarity with your drilldriver to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury. BATTERY PACK (MODEL 315.114520) The battery pack for your tool has been shipped In a low charge condition to prevent possible prebiems. Therefore, you should charge it until light on front of charger changes from red to green. Note: Batteries will not reach full charge the first time they are charged. Allow several cycles (drilling followed by recharging) for them to become fully charged. CHARGING BATTERY • • • • • • • • • • Red LED on = Fast charging mode. Green LED on = Fullycharged and [ntricklecharge mode. • Green LED on = When batterypack Is InsettedInto charger, Indicateshot battery pack or that battery pack Is out of or below normal temperature range. Yellowand Green LEDs on = Deeplydischargedor defective battery pack. No LED on = Defective charger or battery pack. • • PACK _i, (MODEL 315.114520) See Figure 1. • • • • Charge battery pack only with the charger provided. Make sure power supply is normal household voltage, 120 volts, 60 Hz, AC only. Connect charger to power supply. Place battery pack in charger aligning raised rib on battery pack with groove in charger. See Figure 1. Press down on battery pack to be sure contacts on battery pack engage properly with contacts in charger. Normally, the red LEE) on charger will come on. This indicates charger is [n fast charging mode, Red LED should remain on for approximately 1 hour then the green LED will come on. Green LED on Indicates battery pack Is fully charged and charger is In trickle charge mode. Note: Green LED will remain on until batten/pack Is removed from charger or charger Is disconnected from power supply. If both yellow and green LED come on, this Indicates a deeply discharged or defective battery pack. Allow battery pack to remain in charger for 15 to 30 minutes. When battery pack reaches nern'_l voltage range, red LED should come on. If red LED does not come on after 30 minutes, this indicates a defective battery pack and should be replaced. Alter normal usage, a minimum of 1 hour of charging time is required to fully recharge battery pack. The battery packwill become slightly warm tothe touch while charging. This is normal and does not indicate a problem. Do not place charger and battery pack In an area of extreme heat or cold. It will work best at normal room temperature. Note; Charger aho battery pack should be placed in a location where the temperature is more than 50°F but less than 100°F. CAUTION: To prevent damage to battery pack, remove battery packfrom charger Immediately if no LED comas on. Return battery pack and charger to your nesrest Sears Service Center for checldngor rep[ec]ng.A[so, If you are removing battery pack from charger and no LEDs are on, return both batterypack and charger to your nearest Sears Service Center. Do not Insertanother battery pack intocharger. A damaged charger may damage a battery pack. IMPORTANT INFORMATION HOT BATTERY PACK FOR RECHARGING When using your drill-driver continuously, the pattedes in your battery pack will become hot. You should let a hot battery pack cool down for apprexlmately 30 minutes before attempting to recharge. When the battery pack becomes discharged and Is hot, this will cause the green LED to come on instead of the red LED. Alter 30 minutes, reinsert battery pack in charger, ff green LED continues to remain on, return battery pack to your nearest Sears Repair Center for checking or repleclng, Note; This situation only occurs when continuous use of your drill causes the batteries to become hot. It does not occur under normal circumstances. Refer to "CHARGING BAI-rERY PACK" for normal recharging of batteries. If the charger does not charge your battery deck under normal circumstances, return both the battery pack and charger to your nearest Sears Repair Center for electrical check. IMPORTANT INFORMATION COOL BATTERY PACK FOR RECHARGING If battery pack Is below normal temperature range, the green LED on charger will come on. Allow battery pack to reach normal temperature, than the red LED will coma on. Note', Refer to "CHARGING BATTERY PACK" for normal recharging of batteries, If the charger does not charge your battery pack under normal circumstances, return both the battery pack and charger to your nearest Sears Repair Center for electrical check. When batteries become fully charged, unp[ug charger from power supply and remove the battery pack. 10 SWITCH See Figure 2. TO INSTALL BATI'ERY RI Lockswitchtflggeronyourdrlll by placing the direction of rotationselectorIn center position,See Figure 5. • Place battery peck In your drill. Align raised fib on battery pack with groove insideddll. See Figure 4. To turn your drillON, depress the switchtdgger. To turn It OFF, release the switch trigger, SWITCH TRIGGER VARIABLE PACK Fig. 2 SPEED BATTE_ ___TCHES This tool has a variable speed switch that delivers higher speed and torque with increased trigger pressure. Speed is controlled by the amount of switch trigger depression. Note: You might hear a whistling or dnglng noise from the switch dudng use. Do not be concerned, this Is a normal part of the switch function, TWO-SPEED See Figure 3. GEAR TRAIN Your drill has a two-speed gear train designed for drilling or driving at LO (1) or HI (2) speeds, A slide switch is located on top of your drill to select either LO (1) or HI (2) speed, When using drill In the LO (1) speed range, speed will decrease and unit will have more power and torque. When using drill In the HI (2) speed range, speed will Increase and unit will have less power and torque. Use LO (1) speed for high power and torque applications and HI (2) speed for fast ddlllng or driving applications. TWO SPEED GEAR TRAIN (HI-LO) RELEASEBATTERYPACK • A LO SPEED Fig, 4 Make sure the latches on each side of your battery pack snap In place and battery pack is secured in drill before beginningoperation. CAUTION: When placingbattery pack In your drill, be sure raised rib on battery pack aligns with groove insidedrilland latches snap into place properly. Improperassembly of battery peck can cause damage to Internalcomponerts. TO REMOVE BAI"FERY PACK SPEED • • • Fig. 3 11 Lock switchtriggeron your ddll by placingthe direction of rotationselector in center position. See Figure5. Locate latches on side of battery pack and depress to release battery pack from your drill. See Figure 4, Remove battery pack from your dflll. SWITCH LOCK KEYLESS CHUCK See Figure 5, See Figure 6. The switch trigger can be locked In the OFF position. This feature can be used to prevent the possibilityof accidental starting when not In use. To lock switch tdgger, place the directionof rotation selector (Forward/Reverse Selector) in center position. Yourdrillhas a le_ylesschuck,As me name implies,you can hand tighten or releaseddl]bits in the chuckjaws. Graspand ho4dthe collarofthe chuckwith one hand.Rotate the chuck bodywithyourother hand.The an-owson the chuck Indicatewhichdirectionto rotatethe chuck bodyIn orderto LOCK (tighten) or UNLOCK (release) the drillb_t. SELECTORWITH CENTER LOCK POSITION REVERSE UNLOCK (RELEASE) CHUCK COLLAR DRILLBIT FORWARD SWITCH TRIGQER CHUCKJAWS Fig. 5 LOCK mGHTE_ WARNING: Battery tools are always In operating condition. Therefore, switch should always be locked when not In use or carrying at your side. FIg. 6 REVERSIBLE _lb WARNING : Do not hold chuck body with one hand and use powerof the drillto tightenchuck Jaws on drillbit. Chuck body could slip In your hand or your hand could slipand come in contact with rotatingdrill bit. This could cause an accidentresulting in sedous personal Injury. See F/gum 5. This tool has the feature of being reversible. The direction of rotation is controlled by a se]ector located above the switch trigger. With the drill held In normal operating position, the direction of rotation selector should be positioned to the left of the switch for drilling. The drilling direction is reversed when the selector is to the right of the switch. When the selector is in center position, the switch trigger is locked. _k CHUCK BODY CAUTION: To prevent gear damage, always al]ow chuck to come to a complete stop before changing the directionof rotation. To stop, release switch trigger and allow the chuck to come to a complete stop. 12 INSTALLING See Figure 7. REMOVING BITS BITS See Figure Z • Lock the switch trigger by placing the direction of rotation selector in center position, See Figure 5, • Lock the switch trigger by placing the direction of rotation selector in center position. Sea Figure 5. • Open or close chuck jaws to a point where the opening Is slightly larger than the bit size you intend to use. Also, raise the front of your drill slightly to keep the bit from falling out of the chuck Jaws. • Loosen the chuck Jaws from drill bit. • To loosen: grasp and held the collar of the chuck with one hand, while rotating chuck body wtth your other hand, Note: Rotate chuck body in the direction of the arrow marked UNLOCK to loosen chuck Jaws. • Insert drill bit stre(ght Into chuck the full length of the jaws as shown in Figure 7. • Tighten the chuck Jaws on ddll blL UNLOCK (RELEASE) • Do not use a wrench to tighten or loosen the chuck JAWS, • CHUCK COLLAR Remove drill bit from chuck Jaws. ADJUSTABLE DRILLBIT TORQUE CLUTCH Your ddll is equipped with an adjustable torque clutch for driving different types of screws into different materials, The proper setting depends on the type of material and the size of screw you are using, TO ADJUST TORQUE CHUCK JAWS ,_ 5- 8 LOCK CHUCK (TIGHTEN) BODY RIGHT • • Identify the twentyfour torque Indicatorsettingslocated on the front ofyour drill. See Figure 9, Rotate adjusting ringto the desired setting. • 1- 4 For drivingsmall screws. • 9-12 For driving screws intosoft and hard materials. For drivingscrews In herd wood. Fig. 7 ,13-16 To tighten the chuck jaws on drill bit; grasp and hold the collar of the chuck with one hand, while rotating the chuck body with your other hand. • 17- For drivingscrewsinto sott matedal. 20 For drivinglarge screws. ' 24 - 4Ll_l For heavy drilling. Note: Rotate the chuck body In the direction of the arrow marked LOCK to tighten chuck Jaws. Do not use a wrench to tighten or loosen the chuck Jaws. TO DECREASE TORQUE ADJUSTING RING A WARNING: Make sure to insert:drill bit straightinto chuckJaws. Do not Insert drill bit Intochuck Jaws at an angle then tighten, as shown in Figure 8, This could cause drill bit to be thrown from drill, resulting in possibleserious personal injuryor damage to the chuck, TO INCREASE TOROUE Fig. B 13 Fig, 9 BITSTORAGE DRILLING See Figure 10. See Figure 12. When not in use, bits provided with your drill can be placed in the storege area located on the bottom of your drill as shown in Figure 10, BI1 STORAGE AREA Fig. 10 _k WARNING; Always wear salaty goggles or safety glasses with side shields when operating tools, Fig. 12 Fal]ureto do so could resultin objects being thrown Intoyour eyes, resultingIn possibleseriousInjury. When drillinghard smooth surfacesuse a center punch to mark desired hole location.This will prevent the drill bit from slippingoffcenter as the hole is started.However, the low speed feature allows starting holes withoutcenter punchingff desired. To accomplishthis, simplyoperate your drill at a low speed untilthe hole Is started. The material to be drilled shouldbe secured in avlse or with clampsto keep it from turning as the drillbit rotates. LEVEL See Figure 11. A convenient feature provided with your ddll Is a level, It is recessed in the motor housing on back of your drill, It can be used to keep drill bit level during drilling operations, REARVIEW OF DRILL Hold tool firmly and place the bit at the pointto be drilled. Depress the switchtriggerto start tool. Move the drill bit into the workplece applying only enough pressure to keep the bit cutting, Do not force or apply side pressure to elongate a hole. LEVEL A WARNING: Be prepared for binding or bit breakthrough. When these situations occur, drill has a tendency to grab and kick opposite to the direction of rotation and could cause loss of control when breaking through matedaL If not prepared, this loss of control can result in possible serious injury, When drillingmetals, use a light oll on the drill bitto keep it from overheating.The ollwill prolongthe life ofthe bit and increase the drillingaction. Fig, 11 If the bit JamsIn workplece or Ifthe drill stalls, release switchtrigger Immediately.Remove the bitfrom the workplece and determinethe reason for jamming. 14 CHUCK REMOVAL • See Figures 13, 14, and 1.5. The chuck must be removed In order to use some aGcessories. To remove: • Lock the switch trigger by placing the direction ot rotation selector in center position. See Figure 5. • Insert a 5/16 in. or larger hax _ into the chuck of your ddll and tighten the chuck jaws securely. • Tap the hex key sharply with a mallet In a clockwise direction. See Figure 13. This will loosen the screw in the chuck for easy removal. Insert hex key in chuck and tighten chuck J_NS securely. Tap sharply with a mallet In a counterclockwise direction. This will loosen chuck on the spindle. It can now be unscrewed by hand. See Figure 15. MALLET MALLET CHUCKJAWS \ Fig. 15 TO RETIGHTEN HE](KEY • A LOOSE CHUCK The chuck may become loose on spindle and develop a wobble. PedodlcaJiy check chuck screw for tightness. KEYLESS CHUCK To tighten, follow these steps: Open chuck Jaws and remove hex key. Remove the chuck screw by turning it in a clockwise direction. See Figure 14. Note: The screw has left hand threads. • Lock the switch trigger by placing the direction of ro_atlon selector In cer_er position, See Figure 5. • Open the chuck jaws. • insert hex key into chuck and tighten chuck Jaws securely. Tap hex key sharply with a mallet in a clockwise direction. Th]s will tighten chuck on the spindle. • Open the chuck Jaws and remove hex key. • Tighten the chuck screw. Note: The chuck screw has left hand threads. SCREWDRN ER Fig, 14 15 A Do not abuse power tools. Abusive practices can damage tool as well as wor_
Source Exif Data:File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 18 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Tue Apr 03 11:12:33 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools