Craftsman 315117270 User Manual SANDER Manuals And Guides L0312037

CRAFTSMAN Sander Manual L0312037 CRAFTSMAN Sander Owner's Manual, CRAFTSMAN Sander installation guides

User Manual: Craftsman 315117270 315117270 CRAFTSMAN SANDER - Manuals and Guides View the owners manual for your CRAFTSMAN SANDER #315117270. Home:Tool Parts:Craftsman Parts:Craftsman SANDER Manual

Open the PDF directly: View PDF PDF.
Page Count: 18

Operator's Manual
Belt Sander
Variable Speed
Double Insulated
Model No.
315.117270
Save this manual for future reference.
,_ WARNING; To reduce the risk of injury, the user
must read and understand the operator's manual
before using this product.
Customer Help Line: 1-800-932-3188
Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA
Visit the Craftsman Web page: www.sears.com!craftsman
C_US
983000-261
9-03
• Warranty...................................................................................................................................................................2
• Introduction...............................................................................................................................................................2
• GeneralSafetyRules............................................................................................................................................3-4
• SpecificSafetyRules...............................................................................................................................................4
• Symbols....................................................................................................................................................................5
• Specifications...........................................................................................................................................................6
• Electrical ................................................................................................................................................................... 6
• Unpacking ................................................................................................................................................................. 7
• Applications .............................................................................................................................................................. 7
• Features ................................................................................................................................................................ 7.8
• Operation ............................................................................................................................................................. 9-!3
• Maintenance ........................................................................................................................................................... 14
• Exploded View and Repair Parts List ................................................................................................................ 16-17
• Customer Service Information ................................................................................................................................ 18
FULL ONE YEAR WARRANTY ON I:I_I_I='r,_MAPI BELT SANDER
If this t'RI_I=I"$MRN tool falls to give complete satisfaction within one year from the date of purchase, return it to
the nearest sears stere in the United Slates, and Sears w(ll repa(r it, free of charge.
If this ['RR 1:1"$1'41_Ntool is used for commercial or rentaF purposes, this warranty applies for only 90 days from Ahe
date of purchase.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Dept. 817 WA, Hoffman Estates, IL 60179
Your belt sander has many features for mak(ng the use
cf this tool more pleasant and enjoyable. Safety,
performance, and dependability have been given top
priority in the design of this belt sander making it easy to
maintain and operate.
_1= WARNING: Do not attempt to use this product
until you read thoroughly and understand
completely the operator's manual Pay close
attent(on to the safety rules, including Dangers,
Warnings, and Cautions. If you use this product
properly and only as intended, you wUI enjoy years
of safe, reliable service.
jj_ Look for this symbol to point out important safety precautions. It means attention!!(
Your safety is involved.
0The operation of any too( can result in fore(gn objects being thrown into your eyes, which can
result in severe eye damage, Before beginning operat(on, always wear safety goggles or safety
glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety
Mask for use over eyeglasses or standard safety glasses with side shields. Always wear eye
protection which Is marked to comply with ANSI Z87.1.
2
WARNING: Read and understand all
instructions. Failure to follow all instructions listed
below, may result in electric shock, fire and/or
serious personal injury.
SAVE THESE INSTRUCTIONS
WORK AREA
•Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents,
• Do not operate power tools In explosive atmo-
spheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
•Keep bystanders, children, and visitors away
while operating a power tool. Distractions can
cause you to lose control,
ELECTRICAL SAFETY
•Double insulated tools are equipped with a
polarized plug (one blade is wider than the other),
This plug will fit in a polarized outlet only one
way, If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a
qualified electrician to install apolarized outlet.
Do not change the plug in any way. Double insula-
tion [] eliminates the need for the three-wire
grounded power cord and grounded power supply
system.
•Avoid body contact with grounded surfaces such
as pipes, radiators, ranges, and refrigerators.
There is an increased risk of electric shock ifyour
body is grounded.
•Don't expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
• Do not abuse the cord. Never use the cord to
carw the tools or pull the plug from an outlet.
Keep cord away from heat, oil, sharp edges, or
moving parts. Replace damaged cords Immedi-
ately, Damaged cords increase the risk of electric
shock.
•When operating a power tool outside, use an
outdoor extension cord marked "W-A" or "W".
These cords are rated for outdoor use and reduce the
risk el electric shock.
PERSONAL SAFETY
•Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use tool while tired or under the influence of
drugs, alcohol, or medication. Amoment of inatten-
tion while operating power tools may result in serious
personal injury.
•Dress properly. Do not wear loose clothing or
jewelry. Contain long hair. Keep your hair, cloth-
ing, and gloves away from moving parts. Loose
clothes, jewelry, or long hair can be caught in moving
parts.
• Avoid accidental starting. Be sure switch is off
before plugging in, Carrying tools with your finger
on the switch or plugging in tools ti_at have the s;'_ltoh
on invites acoider_ts.
1 Remove adjusting keys or wrenches before
turning the tool on. Awrench or a key that is le_
attached to a rotating part of the tool may result in
personal injury.
I Do not overreach. Keep proper footing and
balance at all times. Proper footing and balance
enables better control of the tool in unexpected
situations.
l Use safety equipment. Alwayswear eye protec-
tion. Dust mask, nonskid safety shoes, hard hat, or
hearing protection must be used for appropriate
conditions,
• Do not wear loose clothing or jewelw. Contain
long hair. Loose clothes, Jewelry, or long hair can be
drawn into air vents.
• Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
tool in unexpected situations.
TOOL USE AND CARE
•Use clamps or other practical way to secure and
support the workpieca to a stable platform.
Holding the work by hand or against your body is
unstable 8,nd may lead to loss of control.
• Do not force tool, Use the correct tool for your
application. The correct tool wilJ do the job better
and safer at the rate for which it is designed.
•Do not use tool If switch does not turn it on or off.
Any tool that cannot be controlled with the switch is
dangerous and must be repaired,
•Disconnect the plug from power source before
making any adjustments, changing accessories,
or storing the tool. Such preventive safety mea-
sures reduce the risk of starting the tool accidentally.
•Store Idle tools out of the reach of children and
other untrained persons. Tools are dangerous in the
hands of untrained users.
• Maintefn tools with care. Kesp cutting tools sharp
and clean. Properly maintained tools with sharp
cutting edges are less likely to bind and are easier to
control.
•Check for misalignment or binding of moving
parts, breakage of parts, and any other condition
that may affect the tool's operation. If damaged,
have the tool serviced before using. Many acci-
dents are caused by poorly maintained tools.
•Use only accessories that are recommended by
the manufacturer for your model. Accessories that
may be suitable for one tool, may become hazardous
when used on another too!.
•Keep the tool and its handle dry, clean and free
from oil and grease. Always use a clean cloth when
cleaning. Never use brake fluids, gasoline, petroleum-
based products, or any strong solvents to clean your
tool. Following this rule will reduce the risk of loss of
control and deterioration of the enclosure plastic.
3
SERVICE
•Tool service must be performed only by qualified
repair personnel. Service or maintenance performed
by unqualified personnel ceuld result in arisk of
injury.
•When servicing a tool, use only identical replace-
ment parts. Follow instructions in the Mainte-
nance section of this manual. Use of unauthorized
parts or failure to follow Maintenance InsRructions
may create arisk of electric shock or iniury.
•Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may
contact hidden widng or its own cord. Contact with a "live" wire will make exposed metal parts of tile tool "live"
and shock tl_e operator.
ADDITIONAL RULES FOR SAFE OPERATION
•Know your power tool. Read operator's manual
carefully. Learn its applications and limitations,
as well as the specific potential hazards related to
this tool. Following this rule will reduce the risk of
electric shock, fire, or serious injuW.
•Always wear safety glasses. Everyday eyeglasses
have only impact-resistant lenses; they are NOT
safety glasses, Following this rule will reduce the
risk of serious personal injury.
•Protect your lungs. Wear a face or dust mask if
the operation is dusty. Following this rule will
reduce the risk of serious personal injury.
•Protect your hearing. Wear hearing protection
during extended periods of operation. Following
this rule will reduce the risk of serious personal injury.
•Inspect tool cords periodically and, if damaged,
have repaired at your nearest Authorized Service
Center. Constantly stay aware of cord location.
Fallowing this rule will reduce the risk of electric
shock or fire,
•Check damaged parts. Before further use of the
tool, a guard or other part thai is damaged should
be carefully checked to determine that it will
operate properly and perform its intended func-
tion. Check for alignment of moving parts, bind*
ing of moving parts, breakage of parts, mounting,
and any other conditions that may affect its
operation. A guard or other part that is damaged
should be properly repaired or replaced by an
authorized service center. Following this rule win
reduce the risk of shock, fire, or serious injury,
•Do not abuse cord. Never carry the tool by the
cord or yank It to disconnect it from the recep-
tacle. Keep cord away from heat, oil, and sharp
edges. Following this rule will reduce the risk of
electric shock or tire.
•Make sure your extension cord is in good condi-
tion. When using an extension cord, ha sure to
use one heavy enough to carry the current your
product will draw. Awire gage size (A.W.G.) of at
least 14 is recommended for an extension cord 50
feet or less in length. A cord exceeding 100 feel is
not recommended. If in doubt, use the next
heavier gage. The smaller the gage number, the
heavier the cord. An undersized cord wilt cause a
drop in line voltage resulting in loss of power and
overheating,
•Inspect for and remove all nails from lumber
before using this tool. Fallowing this rule will reduce
the risk of serious personal injury.
•Drugs, alcohol, medication. Do not operate tool
while under the influence of drugs, alcohol, or
any medication. Following this rule will reduce the
risk of electric shock, fire, or serious personal injury,
•Savethasa instructions. Refer to them frequently
and use them to instruct others who may use this
tool. If you loan someone this tool, loan them these
instructions also,
_k WARNING: Some dust created by power sanding,
sawing, grinding, drilling, and other construction
activities contains chemicals known to cause
cancer, birth defects or other reproductive harm
Some examples of these chemicals are:
• lead from _ead-based paints,
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemically-
treated lumber,
Your risk from these exposures varies, depend-
ing on how often you do this type of work. To
reduce your exposure to these chemicals: work
in a well ventilated area, and work with approved
safety equipment, such as those dust masks
that are specially designed to filter out micro-
scoplc particles,
SAVE THESE INSTRUCTIONS
4
important; Some of the following symbols may be used on your tool Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer,
SYMBOL NAME DESIGNATION/EXPLANATION
V
A
Hz
W
min
,.%,
n0
[]
•,./rain
A
0
Volts
Amperes
Hertz
Watt
Minutes
Alternating Current
No Load Speed
Class II Construction
Per Minute
Safety Alert
Eye Protection
Wet Conditions Alert
Voltage
Current
Frequency (oycles per second)
Power
Time
Type of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc., per minute
Precautions that involve your safety
Always wear safety goggles or safety glasses with side shields
and a full face shield when operating this product.
Do nat expose to rain or use in damp locations.
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the
explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves
eliminate any danger, The instructions or warnings they give are not substitutes for proper accident prevention
measures,
SYMBOL MEANING
_. DANGER: indicates an Imminently hazardous situation, which, if not avoided, will result in death orserious injury,
AWARNING; Indicates a potentially hazardous situation, which, if not avoided, could result in death or
serious injury.
,_ CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result fn minor ormoderate injury. It may also be used to alert against unsafe practfcas that may cause property damage.
Important: Advises you of important information or instructions vital to the operation or maintenance of
the equipment.
Note: Advises you of additional Information concerning the operation or maintenance of the equipment,
5
BeltSize........................................................................................................................3in.x 21In.(76mmx533mm)
SandingSurface........................................................................................................16.5squarein.(106.5squarecm)
Input ...................................................................................................................... 120 Volts, 60 Hz, AC only, 8.5 Amps
Variable Speed .......................................................................................................... 800 - 1300 ft. (244 m - 396 m)imin
Net Weight .................................................................................................................................................. 11 {bs. (5 kg)
DOUBLE INSULATION
Double insulation is a concapt in safety in electric power
tools, which eliminates the need for the usual three-wire
grounded power cord. All exposed metal parts are
isolated from the internal metal motor components with
protecting insulation, Double insulated tools do not need
to be grounded,
Important: Servicing of a tool with double insulation
requires extreme care and knowredge of the system and
should be performed only by a qualified service
technician. For service, we suggest you return the tool
to your nearest authorized service center for repair,
When servicing, use only identical Craftsman
replacement ports.
WARNING: The double insulated system is
intended to protect the user from shook resulting
from a break in the tool's internal wiring. Observe
all normal safety precautions to avoid electrical
shock,
ELECTRICAL CONNECTION
The belt sander has a precision built electric motor, It
should be connected to a power supply that is 120
volts, 60 Hz, AC only (normal household current).
Do not operate this toot on direct current (DC). A
substantial voltage drop will cause a loss of power and
the motor will overheat. If your tool does not operate
when plugged into an outlet, double-check the power
supply.
EXTENSION CORDS
The use of any extension cord will cause some loss of
power, To keep the loss to a minimum and to prevent
tool overheating, use an extension cord that is heavy
enough to carry the current the tool will draw.
Awire gage size (A,W,G,) of at least 14 is
recommended for an extension cord 50 feet or less in
length. When working outdoors, use an extension cord
that is suitable for outdoor use, This type of cord is
designated with '%'A" on the cord's jacket.
_, CAUTION: Keep extension cords clear of the
working area. While you are working witha power
tool, position the cord so that it will not get caught
on lumber, tools, or other obstructions.
WARNING: Check extension cords before each
use. Ffdamaged, replace them immediately. Never
use a damaged cord with this tool, Touching the
damaged area courd cause serious injury due to
electrical shock,
Extension cords suitable for use with your tool are
available at your nearest Sears retail store.
6
INSTRUCTIONS
Yourbe)tsanderhasbeenshippedcompletely
assembled.
• Carefullyremovethetoolandtheaccessoriesfrom
thebox.
• Makesurethatallitemslistedinthepackinglistare
included.
• Inspectthetoolcarefullytobesurenobreakageor
damageoccurredduringshipping.
• Donotdiscardthepackingmaterialuntilyouhave
carefullyinspectedandsetls'tactorilyoperatedthe
tool,
• Ifanypartsaredamagedormissing,pleasecall
1-800-932-3188forassistance,
PACKING LIST
Belt Sander
Sanding Belts (3)
Dust Collection Bag
Case
Operator's Manual
j_IL WARNING: If any parts are missing, do not
operate your tool until the missing parts are
replaced, Failure to do so could result in serious
personal injury.
WARNING: The belt sander should never be
connected to a power supply when you are
assembling parts, making adjustments, cleaning,
performing maintenance, or when the tool is not in
use. Disconnecting the tool prevents accidentat
starting that could cause serious injury,
You may use your belt sander for the purposes listed below:
• Sanding wood, metals, plastics, and other materials.
• Smoothing rough boards, chamfering, rounding edges, etc.
• Removing rust, paint, varnishes, and stains,
Before using the belt sander, familiarize yourself with all
operating features and safety requirements. However,
do not let familiarily with the tool make you careless.
_WARNING: Exercise caution when using the belt
sander. Careless actions, for even a fraction of a
second, can result in serious personal injury.
Your new belt sander Is equipped with the following
features, See Figure 1.
LOCK-ON
The lock-on feature ai)ows you to lock the trigger switch
in the ON position. Locking the trigger switch on altows
you to operate the sander for extended periods of time.
TENSION RELEASE LEVER
The tension release lever aids in quick and easy belt
changes.
TRACKING KNOB
The tracking knob allows you to easily adjust the bett
tracking.
DUST COLLECTION BAG
The dust collection bag attaches to the sander and
keeps dust to aminimum,
ERGONOMIC DESIGN
The design of the sander provides for easy handling, It
is designed for comfort and ease of grasp when
operating In different positions and at different angles.
VARIABLE SPEED ADJUSTMENT DIAL
The Variable Speed adjustment dial allows you to
adjust speeds from 800-1300 (244 m - 396 m)
surface feet per minute for different types of
materials and applications.
DUST
COLLECTIONBAG
R_R
HANDLE
FRONT
HANDLE
TENSION
RELEASELEVER SANDING BELT
VARIABLE SPEED
ADJUSTMENTDIAL
TRACKING
KNOB
LOCK-ON
BU'I-FON
TRIGGER
SWITCH
BLOWER
EXHAUSTHOLE Fig. I
8
WARNING : Always wear safety goggles or safety
glasses with side shields when operating this tool.
Failure to do so could result in dust, shavings,
chips, or loose panicles being thrown in your eyes
resulting in possible serious injury. If the operation
is dusty, also wear aface or dust mask,
SELECTING SANDING BELTS
Selecting the correct size and type of sanding belt is an
important step in achieving a high quality sanded finish.
Aluminum oxide, silicon carbide, and other synthetic
abrasives are best for power sanding.
in general, when sanding, coarse grit removes the most
material and fine grit produces the best finish. The
condition of the surface to be sanded determines which
grit wilt do the best job. If the surface is rough, start with
a coarse grit and send until the surface is uniform, Then
use medium grit to remove scratches left by the coarser
grit. Finally, use finer grit for finishing the surface.
Always continue sanding with each grit until the surface
is uniform,
USING SANDING BELTS
TO INSTALL/CHANGE SANDING BELTS
See Figures 2, 3, and 4.
Follow these steps to install or change sanding belts,
• Unplug the sander.
_. WARNING: Failure to unplug the tool could result
in serious injury due to accidental staring.
• Position the sander on its side with the cord on
t he left.
_L, WARNING: Keep hands and fingers clear of both
rollers and spring mechanism at all times, Failure
to do so could result in fingers getting pinched,
causing serious injury,
TENSION
\
• Raise the tension release lever,
Note: If you are changing sanding belts, remove the
old sanding belt at this time.
• Install the sanding belt.
_k CAUTION: Jfthe sanding belt is not a bidirectional
belt+ ensure that the arrow inside the belt is
pointing in the direction of the rotatfon (clockwise
when looking into the open slde of the sander).
Installing unidirectional sanding belts backwards
can create a hazardous condition.
• Align the sanding belt to its correct position.
• Lower the tension release lever to secure the
sanding belt.
TENSIONRELEASELEVER
(INRELEASEDPOSITION) Fig. 3
INSTALL UNIDIRECTIONALBELTS IN THEDIRECTIONOFTHE
ROTATION
INSTALL BIDIRECTIONALBELTSIN EITHERDIRECTION
Fig, 4
Fig, 2
9
TO ADJUST SANDING BELT TRACKING
See Figures 5 and 6.
Belt fife is greatly increased if you regularly adjust the
sanding belt tracking, When correctly adjusted, the
outer edge of the sanding belt should be even with the
outer edge of the base of the sander.
When you install a new sanding belt, you may need to
adjust the sanding belt tracking several times until the
belt becomes pliable,
Follow these steps to adjust sanding belt tracking.
WARNING: Before cannectJng the sander to a
power supply, always make sure it is not Jn the
"locked-on" position. Failure to do so could result in
accidental starting of the sander resulting in
possible serious injury,
• Connect the sander to a power supply.
• Position the sander upside clown with the cord on
the left.
Note: This position is for adjustments only. The
sanding belt should not contact a workpleca or any
foreign object when you are making belt tracking
adjustments,
_, CAUTION: If the sanding belt wears excessively
on the inner edge, it is probably adjusted teefar
inward and is rubbing against internal parts, !! this
is the case, readjust the tracking knob.
• Start the sander and fine adjust the tracking knob
until the belt stabilizes.
,_IL WARNING: Keep hands and fingers away from a
moving sanding belt, Any part of the body coming
in contact with amoving sanding belt could result
In serious injury, Do not wear loose clothing or
jewelry when operating the sander. They could get
caught in moving parts and foreign objects could
get thrown away from the sander causing injury,
TURN =
CLOCKWISEIF BELT I
RUNSINWARD
TURN COUNTERCLOCk'WlSEIF
BELT RUNS OUTWARD Fig, 6
Fig. 5
Depress the trigger switch and release immediately.
Observing any sideways movement of the belt.
Choose one of these options:
Sanding belt runs inward:. -rum the tracking knob
slowly clockwise.
Sanding belt runs outwaro_ Tam the tracking
knob slowly counterclockwise,
Note: 1"urn the tracking knob until you are sure the
sanding belt is secure, i,e,, it will not come offthe
sander or contact internal parts.
10
USING THE BUST COLLECTION BAG
The dust collection bag provides a dust collection
_stem forthe sander.
,_ WARNING: Do not use the dust collection bag
when sanding metal. Using the dust collection bag
when sanding metal creates a tire hazard, which
could damage the tool and lead to serious personal
injury.
TO ATTACH THE DUST COLLECTION BAG
See F_gure 7.
Follow these steps to attach the dust collectionbag.,
• Unplug the sander.
WARNING: Failure to unplug the tool could result
in serious injury due to accidental starting.
• Slide the dust bag retainer over the blower exhaust
hole on the sander,
Follow these steps to empty the dust collection bag.
• Unplug the sander.
_k WARNING: Failure to unplug the tool could result
in serious Injury due to accidental starting.
•Remove the dust collection bag from the sander.
• Unzlpthe dust bag.
• Shake out the dust,
• Zip up the dust bag.
• Replace the dust collection bag.
Note: Periodically, you should turn the dust bag
inside-out and thoroughly clean it.
TURNING ON/OFF THE SANDER
See Figure 8.
Fellow these directions to turn the sander on and off.
•TOturn on the sander Depress the trigger switch.
•To turn off the sander: Release the trigger switch
TRIGGER
8WITCH
Fig. 7
TO EMPTY THE DUST COLLECTION BAG
For more efficient operation, empty the dust collection
bag when it is no more than haft full. This action permits
the air to flow through the bag better, Always empty and
clean the dust collection bag thoroughly upon
completion of a sanding operation and before placing
the sander in storage.
WARNING: Collected sanding dust from sanding
surface coatings such as polyurethanes, linseed
oil, etc. can self-ignite in your sander dust
collection bag or elsewhere and cause fire. To
reduce the risk of fire always empty your dust bag
frequently while sanding and never store or leave a
sander without totally emptying its dust bag. Also
follow the recommendations of the coatings
manufacturers,
LOCK-ON
BUTTON
LOCKING ON THE SANDER
See Figure 8.
The lock-on feature allows you to lock the trigger switch in
the On position. Locking the trigger switch o n allows you to
operate the sander for extended periods of time,
ffyou have the lock-on featu re engaged during use and t he
sander is accidentally disconnected from the power supp_/,
disengage the lock-or] feature immediately. Also, do not
lock the trigger switch if you might need to suddenly stop
the sander.
WARNING: Before connecting the sander to a
power supply, make sure it is not in the locked-on
position. Failure to do so could result in accidentat
starting of the tool resulting in serious injury.
11
Followthesestepstolockonthesander.
• Depressthetriggermvitch.
• Pushinthelook-onbutton,
• Releasethetriggers'witch,
• Release the lock-on button.
Note: To release the lock, depress the trigger
switch,
Your sander has a variable speed control dial, A to F,
designed to allow operator control of belt speed. To
increase belt speed, turn the variable speed control
dial to a higher setting. Turn to a lower setting to
decrease belt speed. Refer to the chart on page 13
for proper speed selections,
OPERATING THE SANDER
See Figure 9.
Follow these steps to operate the sander.
• Secure the work to prevent it from moving under the
sender.
WARNING: Unsecured work could be thrown
towards the operator causing injury,
Turn the sander on end let the motor reach its
maximum speed before placing the sander on the
work surface,
Lower the sander to the work surface with a slight
forward motion.
Move the sander slowly over the work surface,
using the rear handle to control the sander and the
front handle to guide the sander.
Note: Allowing the sander to remain inone place
will result in an uneven surface.
_k WARNING: Keep a firm grip on the sander with
both hands at all times, Failure to do so could
result in toss of control leading to possible serious
injury.
We designed the sander to provide the proper weight on
the sanding belt, Excessive pressure will result in the
following:
• Uneven work
•Clogged sanding belts
• Premature sanding belt wear
• Possible to!!or burnout
• Irregular sanding belt tracking
,_ WARNING: Keep hands and fingers clear of
moving sanding belt, front idlerroller,and drive
roller assembly, Failure to do so will result in
serious personal injury.
Fig, 9
PROPER HAND PLACEMENT
See Figure 10,
For ease of operation and maintaining proper control,
the sander has afront handle and a rear handle. These
handles allow two-handed operation, which aids in
maintaining control, keeping the sanding area level with
the workplace, and keeping hands clear of the sanding
belt. When operating the sander, always held the front
handle with your left hand and the rear handle with your
right hand.
_i, WARNING: Do not fat your fingers rest over the
front or right edge of the sander If the sanding bait
were to run off, or if itwere not properly adjusted,
your fingers could come in contact with the moving
sanding belt resulting in possible serious injury.
12
HELPFUL TIPS
•If the sanding belt slips or does not track while sand-
ing, you may be applying too much pressure. When
this occurs, remove the sander from the workpieoe.
I_,ou properly adjust the belt tracking, the sanding belt
will return to its normal and correct position on the
drive roller and front roller,
• Use a coarser sanding belt for heavy sanding, r_ol
heaw pressure. The weight of the tool is sufficient to
provide adequate pressure at the correct location.
•The front roller of the sander is not designed for con-
tour sanding. Sanding on the front roFler could cause
irregularity in the sanding belt tracking.
SETTING THE BELT SANDER SPEED
Refer to the chart below for beJtsander speed selections.
MATERIAL
SPEED
A B C D
BELT GRIT
80 100E F 40 60 150 240
UNDRESSED TIMBER _= _ • •
SOFTWOOD _ • •
CHIPE_OARD _ _ • •
VENEER TIMBER _ _ •
RUST REMOVAL _ _= • •
PAINTED SURFACE _ _ • •
NON FERROUS METAL _ • •
L
13
_i, WARNING:Whenservicing,useonlyidentical
Craftsmanreplacementparts.Useofanyother
partmaycreatea hazardorcauseproduct
damage.
_'_ WARNING: The belt sander should never be
connected to apower supply when you are
assembling parts, mak)ng adjustments, cleaning,
performing maintenance, or when the tool is not in
use. Disconnecting the tool prevents accidental
starting that could cause serious Iniury.
GENERAL
Only the parts shown on the parts list are intended to be
repaired or replaced by the customer. All other parts are
an important part of the double insulation system and
should be serviced only by a qualified Sears service
technici_,n.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, carbon dust, etc.
,_li WARNING: Do not at any time let brake fluids,
gasoline, petroleum-based products, penetrating
oils, etc. come in contact with plastic parts. They
contain chemicals that can damage, weaken, or
destroy plastic.
Electric tools used on fiberglass material, wallboard,
spackling compounds, or plaster are subject to
accelerated wear and possible premature failure
because the fiberglass chips and grindings are highly
abrasive to bearings, brushes, commutators, etc.
Consequently, we do not recommend using this tool for
extended work on these types of materials. However. iI
you do work with any of these materials, it is extremely
important to clean the tool using compressed air.
WARNING: Always wear safety goggles or safety
glasses with side shields during power tool
operation or when blowing dust. if operation is
dusty, also wear adust mask. Failure to do so
could result Jnpossible serious injury.
LUBRICATION
All the bearings in this tool are lubricated with a
sufficient amount of high grade lubricant for the life of
the tool under normal operating conditions, Therefore,
no further lubrication is required.
14
15
CRAFTSMAN BELT SANDER - MODEL NUMBER 315.117270
SEENOTE
2
10
\
14
Note: The assembly shown represents an important part of the double {nsulated system. To avoid the
possibility of atteration or damage to the system, service should be performed by your nearest Sears
repair center, Contact your nearest Sears retail store for service center Jnformation.
16
tCRAFTSMAN BELT SANDER - MODEL NUMBER 315.117270
The model numberwill be foundon a plate attached to the motor housing,AJwaysmentionthe model
numberin all correspondenceregardingyour BELT SANDER or whenordering repair parts.
SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS
I
Key
NO,
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Pa_
NO.
940211009
300027035
690711001
590477001
560312001
940301005
590560001
900720001
560272001
590481001
690725001
680771001
660212013
983000-261
PARTS LIST
Description Qty.
Logo Plate ............................................................................................................. 1
Sanding Belt .......................................................................................................... 1
Dust Collection Bag .............................................................................................. 1
Wear Plate ............................................................................................................. 1
Belt Cover .............................................................................................................. 1
* Screw {8-32 x3/8 in.) **STD510893 ..................................................................... 2
Data Plate .............................................................................................................. 1
Beit ........................................................................................................................ 1
Backing Pad .......................................................................................................... 1
* Screw (M4 x14 rnm} ............................................................................................. 1
Tracking Knob ....................................................................................................... 1
Spring. ................................................................................................................... 1
Washer .................................................................................................................. 1
* Screw (M4x 14.5 ram) .......................................................................................... 2
Operator's Manual ................................................................................................. 1
*Standard Hardware Item - May Be Purchased Locally
** Available From DIv. 98 - Source 980.0
*** Compile assortment available at your Nearest SearsRetail Store
17
Your Home
For repair-in your home-of all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it_
For the replacement parts, accessories and
owner's manuals that you need to do-it-yourself.
For Sears professional installation of home appliances _,_,
_o and items like garage door openers and water heaters.
_,_,_ 1-800-4-MY-HOME ®(1.800-469-46631
Call anytime, day or night (U.S.A. and Canada)
www.sears.com www.sears.ca
:2
Our Home
_o_ For repair of carry-in items like vacuums, lawn equipment,
, and electronics, call or go on-line for the location of your nearest
Sears Parts &Repair Center,
1-800.488.1222
_ Call anytime, day or night (U.S.A. only)
www.sears.com
_ To purchase a protection agreement (U.S.A.)
"_;i_ or :._intenance agreement (Canada)on a pro_.uct _erviced by Sears: _,ii
1 800-827-6655 (U.S.A.) 1-800-361-6665 (Canada)
Para pedir servicio de reparaci6n Au Canada pour service en fran_ais:
a dornicilio, y para ordenar piezas: 1-800-LE FOYEI_ c;_°'
(1-800-533-6937)
Reg[._er ed Trademark / TMTrademark /sa Se_ice Mark _f Sears, Roebud< and Co.
@MarcaRegistrada/TMMarcade Fabrica/ SMMarca deServicJode Sears, Roebuckand Co.
Me MD
Marque de commerce IMarque d_p os*_e de Sears, Roebud_ and Co. © Sears, Roebuck and Co.

Navigation menu