Craftsman 315267380 User Manual DRILL DRIVER Manuals And Guides L0310008
CRAFTSMAN Drill Driver Manual L0310008 CRAFTSMAN Drill Driver Owner's Manual, CRAFTSMAN Drill Driver installation guides
User Manual: Craftsman 315267380 315267380 CRAFTSMAN DRILL-DRIVER - Manuals and Guides View the owners manual for your CRAFTSMAN DRILL-DRIVER #315267380. Home:Tool Parts:Craftsman Parts:Craftsman DRILL-DRIVER Manual
Open the PDF directly: View PDF 
.
Page Count: 18
| Download | |
| Open PDF In Browser | View PDF |
Operator's Manual iPRO FESSiO HAL i PROFESSIONAL 1/2 in., 14.4 VOLTS CORDLESS DRILL-DRIVER Variable Speed / Reversible Model No. 315.267380 Save this manual for future reference • Safety • Features • Assembly • Operation •, Maintenance • Parts List CAUTION: Read and follow all Safety Rules and Operating Instructionsbefore first use of this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Visit the Craftsman web page: www.sears.com/craftsman 983000-186 04-03 Estates, IL 60179 USA 0( us • Warranty ......................................................................................................................................................................... 2 • Introduction ..................................................................................................................................................................... 3 • General Safety Rules ................................................................................................................................................. 3-4 • Specific Safety Rules ................................................................................................................................................. 4-5 • Symbols .......................................................................................................................................................................... 6 • Product Specifications .................................................................................................................................................... 7 • Features ..................................................................................................................................................................... • Assembly .................................................................................................................................................................. • Operation ................................................................................................................................................................ • Maintenance ................................................................................................................................................................. 16 • Accessories 16 • Exploded View and Repair Parts List ........................................................................................................................... 17 • Parts Ordering / Service ............................................................................................................................................... 18 7-8 9-10 11-15 .................................................................................................................................................................. FULL ONE YEAR WARRANTY ON CRAFTSMAN PROFESSIONAL CORDLESS DRILL-DRIVER If this rRAFTSMAN Professional Cordless Drill-Driver fails due to a defect in material or workmanship within one year from the date of purchase, Sears will repair it, free of charge. WARRANTY SERVICE IS AVAILABLE BY SIMPLY RETURNING THE TOOL TO THE NEAREST SEARS STORE OR SEARS SERVICE CENTER IN THE UNITED STATES. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co., Dept. 817 WA, Hoffman Estates, IL 60179 ,_ _k Look for this symbol to point out important safety precautions. attention!!! Your safety is involved. It means WARNING: The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields, available at Sears Retail Stores. Always wear eye protection which is marked to comply with ANSI Z87.1. 2 Yourdrill-driverhasmanyfeaturesformakingyourdrilling operations morepleasantandenjoyable.Safety, performance anddependability havebeengiventop priorityinthedesignofthisdrill-drivermakingiteasyto maintainandoperate. _. _k Work Area Personal Safety • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. • Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. • • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. • Avoid accidental starting. Be sure switch is in the locked or off position before inserting battery pack. Carrying tools with your finger on the switch or inserting the battery pack into a tool with the switch on, invites accidents. • Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE • Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Electrical • • • INSTRUCTIONS Safety Do not abuse the cord. Never use the cord to carry the charger. Keep cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords Immediately. Damaged cords may create a fire. CAUTION: Carefully read through this entire operator's manual before using your new drill-driver. Pay close attention to the Specific Safety Rules / Symbols, Warnings and Cautions. If you use your drill-driver properly and only for its intended use, you will enjoy years of safe, reliable service. injury. A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery. Use battery only with charger listed. BATTERY PACK CHARGER Item No. 1315107 Item No. _ 11040 or item No. 9 11033 (981403001) (981399-001) Use battery operated tool only with specifically designated battery pack. Use of any other batteries may create a risk of fire. Use only with battery pack listed. 3 • Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations. Do not use on a ladder or unstable support. • Use safety equipment. Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. Tool Use and Care • Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. • Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges are less likely to bind and are easier to control. • Do not force tool. Use the correct tool for your application. The correct toot will do the job better and safer at the rate for which it is designed. Do not use tool if switch does not turn it on or off. A tool that cannot be controlled with the switch is dangerous and must be repaired. • Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool's operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. • Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool, may create a risk of injury when used on another tool. • • • • Disconnect battery pack from tool or place the switch in the locked or off position before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce riskof starting the tool accidentally. Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. Service When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or a fire. • Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator. Additional fire or heat. This will reduce the risk of explosion and possible injury. Rules For Safe Operation Know your power tool. Read operator's manual carefully. Learn its applications and limitations, as well as the specific potential hazards related to this tool. Following this rule will reduce the risk of electric shock, fire, or serious injury. II Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. A wire gage size (A.W.G.) of at least 16 is recommended for an extension cord 100 feet or less in length. A cord exceeding 100 feet is not recommended. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating, Important Rules for Battery Tools • Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery tool or when changIng accessories. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. • Do not place battery tools or their batteries near • Batteries vent hydrogen gas and can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately. • Do not charge battery tool in a damp or wet location. Following this rule will reduce the risk of electric shock. • For best results, your battery tool should be charged In a location where the temperature is more than 50°F but less than 100°F. Do not store outside or in vehicles. Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water, then neutralize with lemon juice or vinegar. If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek Immediate medical attention. Following this rule will reduce the risk of serious personal injury. 4 • Neverusea batterythat hasbeendroppedor receiveda sharpblow. A damaged battery is subject to explosion. Properly dispose of a dropped battery immediately. Failure to heed this warning can result in serious personal injury. • Save these instructions. This manual contains important safety and operating instructions for charger. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. • Before using battery charger, read all instructions and cautionary markings in this manual, on battery charger, and product using battery charger. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. • To reduce risk of injury, charge only nickelcadmium type rechargeable batteries. Other types of batteries may burst causing personal injury and damage. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. • • • Do not expose charger to rain or snow. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. Use of an attachment not recommended or sold To reduce risk of damage to charger body and cord, pull by charger plug rather than cord when disconnecting charger. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. Make sure cord is located so that it will not be b. That extension cord is properly wired and in good electrical condition; and Cord Size (AWG) 16 16 16 Do not disassemble charger; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. Following this rule will reduce the risk of electric shock, fire, or serious personal • To reduce the risk of electric shockl unplug charger from outlet before attempting any maintenance or cleaning. Turning off controls will not reduce this risk. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. • Do not use charger outdoors. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. • Disconnect charger from power supply when not in use. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. RISK OF ELECTRIC SHOCK. DO NOT TOUCH UNINSULATED PORTION OF OUTPUT CONNECTOR OR UNINSULATED BATTERY TERMINAL. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. c. That wire size is large enough for AC ampere rating of charger as specified below: 100' • _WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • lead from lead-based paints, • crystalline silica from bricks and cement and other masonry products, and • arsenic and chromium from chemicallytreated lumber. a. That pins on plug of extension cord are the same number, size and shape as those of plug on charger. 50' Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure: Cord Length (Feet) 25' • • stepped on, tripped over, or otherwise subjected to damage or stress. Following this rule will reduce the risk of serious personal injury. • Do not operate charger with a damaged cord or plug. If damaged, have replaced immediately by a qualified serviceman. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. injury. by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. • • Note: AWG = American Wire Gage SAVE THESEINSTRUCTIONS 5 Important:Some interpretation of the following symbols may be used on your tool. Please study them and learn their meaning. Proper of these symbols will allow you to operate the tool better and safer. SYMBOL NAME EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Alternating Current Type or a characteristic of current Direct Current Type or a characteristic of current no No Load Speed Rotational speed, at no load ] Class II Construction Designates double-insulated tools construction .../min Revolutions or Reciprocation Per Minute Revolutions, strokes, surface speed, orbits etc. per minute ,_ Safety Alert Indicates danger, warning or caution. It means attention!!! Your safety is involved. Wet Conditions Alert Do not expose to rain or use in damp locations. The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures. Symbol A A A NOTE: Meaning DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: injury. Indicates a potentially hazardous situation which, if not avoided, could result in serious CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. Advises you of information or instructions vital to the operation or maintenance of the equipment. 6 PRODUCT DRILL-DRIVER SPECIFICATIONS: 315.267380 CHARGER Item No. 9 11040 (981399-001) 120 V, 60 Hz, AC only 9.6 - 24 Volt t Hour Chuck 1/2 in. Keyless Motor Gear Train DC Motor 14.4 Volt Input Charging Voltage Switch Two Speed Variable Speed Charge Rate No Load Speed 0-350/min. Clutch 0-1200/rain. (High) 24 Positions Maximum Torque 320 in.lb. KNOW YOUR (Low) DRILL-DRIVER See Figure 1. Before attempting to use your drill-driver, familiarize yourself with all operating features and safety requirements. ,_, ,_ WARNING: Carefully read through this entire operator's manual before using your new drill-driver. Pay close attention to the Rules For Safe Operation, Warnings and Cautions. If you use your drill-driver properly and only for what it is intended, you will enjoy years of safe, reliable service. BATTERY PACK Item 1315107 OR Item No, _911033 (981403-001 SWITCH ) LOCK The switch trigger can be locked in the OFF position. This feature helps reduce the possibility of accidental starting when not in use. VARIABLE SPEED This tool has a variable speed switch that delivers higher speed with increased trigger pressure. Speed is controlled by the amount of switch trigger depression, "PNO SPEED GEAR TRAIN Your drill-driver has a two speed gear train designed for drilling or driving at HI or LO speeds. A slide switch is located on top of your drill to select either HI or LO speed, WARNING: Do not allow familiarity with your drilldriver to make you careless. Remember that a careless fraction of a second is sufficient to inflictsevere FORWARD/REVERSE injury. Your drill-driver has a forward/reverse selector located KEYLESS CHUCK Your drill-driverhas a keyless chuck that allows you to hand tighten or release drill bit in the chuck jaws. SWITCH To turn your drill-driver ON, depress the switch trigger. Release switch trigger to turn your drill-driver OFF. (DIRECTION SELECTOR OF ROTATION SELECTOR) above the switch trigger. WRIST STRAP A wrist strap is provided to reduce the chances of dropping your drill-driver. Place one hand through the wrist strap when carrying tool. _, WARNING: If any parts are missing, do not operate your drill-driver untilthe missing parts are replaced. Failure to do so could result in possibleserious personal injury. YELLOWLIGHT"ON" ANDRED LIGHTFLASHINGINDICATES DEFECTIVEBATTERYPACK TORQUE ADJUSTMENTRING CHARGER ) SPEED GEARTRAIN(HI-LO) DIRECTIONOF ROTATIONSELECTOR (FORWARD/REVERSE) KEYLESS CHUCK GREENLIGHT"ON" INDICATESFULLY CHARGEDANDSLOWCHARGING TO MAINTAINBATTERYPACK REDLIGHT"ON" INDICATES FASTCHARGINGMODE SCREWDRIVERBITS BATI'ERYPACK WRISTSTRAP Fig. 1 CHARGER See Figure 2. Your charger has a "key hole" hanging feature for convenient, space saving storage. Screws should be installed so that center distances are 4-1/8 inches apart. CHARGER BATTERYPACKSHOWN IN CHARGER BACKSIDE OF CHARGER Fig. 2 8 AUTO-SPINDLELOCK ,_WARNING: Make sure to insert drill bit straight into chuck jaws. Do not insert drill bit into chuck jaws at an angle and then tighten, as shown in Figure 4. This could cause drill bit to be thrown from drill, resulting in possible serious personal injury or damage to the chuck. Your cordless drill has an auto-spindle lock. This feature makes installing and removing bits much easier. When the switch trigger is released and the motor comes to a complete stop, you may hear a click. The click you hear indicates the auto-spindle lock has engaged and locked the spindle. With the spindle locked, you can easily install or remove bits by turning the chuck sleeve with one hand. The auto-spindle lock disengages when the motor starts again. UNLOCK DRILLBIT CHUCKJAWS Fig. 4 LOCK REMOVING CHUCKSLEEVE RIGHT INSTALLING / See Figure 3. Fig. 3 • BITS See Figure 3. • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 10. • Open or close chuck jaws to a point where the opening is slightly larger than the bit size you intend to use. Also, raise the front of your drill slightly to keep the bit from falling out of the chuck jaws. • Insert drill bit straight into chuck the full length of the jaws as shown in Figure 3, • Tighten the chuck jaws on drill bit. To tighten, grasp and hold the drill with one hand, while rotating the chuck sleeve with your other hand, Note: Rotate the chuck sleeve in the direction of the arrow marked LOCK to tighten chuck jaws. • BITS Do not use a wrench to tighten or loosen the chuck jaws. 9 Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 10. • Loosen the chuck jaws from drill bit. • To loosen, grasp and hold the drill with one hand, while rotating chuck sleeve with your other hand. Note: Rotate chuck sleeve in the direction of the arrow marked UNLOCK to loosen the chuck jaws. • Do not use a wrench to tighten or loosen the chuck jaws. • Remove drill bit from chuck jaws. TO A'I-rACH BAI-I'ERY PACK TO DRILL TO REMOVE See Figure 6. See Figure 5. Note: Battery pack is shipped in a low charge condition. Therefore, it must be charged prior to use. Refer to page 11, "CHARGING BATrERY PACK" for charging instructions. • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 10. • Align raised ribs on battery pack with grooves on bottom of drill, then attach battery pack to drill as shown in Figure 6. • Make sure latch on battery pack snaps into place and battery pack is secured to drill before beginning operation. BA'I-FERY PACK FROM DRILL • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 10. • Depress latch located on front of battery pack (1) to release battery pack. • Pull forward on battery pack (2) to remove from drill. DEPRESSLATCHTO RELEASEBATTERYPACK RAISEDRIBS LATCH FORWARD TO REMOVE GROOVES BATTERYPACK BATTERYPACK Fig. 5 CAUTION: When attaching battery pack to your drill, be sure raised ribs and grooves align properly and latch snaps into place properly. Improper assembly can cause damage to drill and battery pack. 10 Fig. 6 ,_. If after one hour red light is still flashing, this indicates a defective battery pack and should be replaced. WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. CHARGING BA'n'ERY Green light on indicates battery pack is fully charged and slow charging to maintain battery pack. Yellow light on and red light flashing indicates defective battery pack. Return battery pack to your nearest Sears Repair Center for checking or replacing. PACK The battery pack for this tool has been shipped in a low charge condition to prevent possible problems. Therefore, you should charge it until light on front of charger changes from red to green. • When your battery pack becomes fully charged, the red light will tum OFF and the green light will tum ON. • After normal usage, 1 hour of charging time is required to be fully charged. A minimum charge time of 1-1/2 hours is required to recharge a completely discharged tool. • The battery pack will become slightly warm to the touch while charging. This is normal and does not indicate a problem. Note: Batteries will not reach full charge the first time they are charged. Allow several cycles (drilling followed by recharging) for them to become fully charged. TO CHARGE • Charge battery pack only with the charger provided. • • Make sure power supply is normal house voltage, 120 volts, 60 Hz, AC only. Do not place charger in an area of extreme heat or cold. It will work best at normal room temperature. • • Connect charger to power supply. • Attach battery pack to charger by aligning raised ribs on battery pack with grooves in charger, then slide battery back onto charger. See Figure 7. When the batteries become fully charged, unplug your charger from power supply and remove the battery pack. LED FUNCTION LED WILL BE LIGHTED TO INDICATE STATUS OF CHARGER AND BA'n'ERY PACK: BATTERY TO REMOVE CHARGER • • Red LED Lighted = Fast Charging Mode. • Green LED Lighted = Fully Charged And Slow Charging To Maintain Battery Pack. • Red LED Flashing = Hot Or Deeply Discharged Battery Pack. Also Defective Battery Pack After 1 Hour. • Yellow LED Lighted and Red LED Flashing = Defective Battery Pack. IMPORTANT INFORMATION HOT BA'n'ERIES TO ATTACH GROOVES OF CHARGER FOR RECHARGING Under extreme continuous use, the batteries in your battery pack will become hot. You should let a hot battery pack cool down for approximately 1 hour before attempting to recharge. When the battery pack becomes discharged and is hot, this will cause the red light on your battery charger to flash. When battery pack cools down, red light will glow continuously indicating fast charging mode, 1 hour charge time. Once the battery pack cools down, it will recharge battery pack in fast charging mode as normal. Fig. 7 Red light should turn on. Red light indicates fast charging mode. Note: This situation only occurs when extreme continuous use of your drill causes the batteries to become hot, It does not occur under normal circumstances. Refer to If red light is flashing, this indicates battery pack is deeply discharged or hot. If battery pack is hot, red light should become steady after battery pack has cooled down. "CHARGING BA'n'ERY PACK" for normal recharging of batteries. If the charger does not charge your battery pack under normal circumstances, return both the battery pack and charger to your nearest Sears repair center for electrical check. If battery pack is deeply discharged, red light should become steady after voltage has increased, normally within 60 minutes. 11 SWITCH SWITCH See Figure 8. See Figure 10. LOCK TO turn your drill ON, depress the switch trigger. To turn it OFF, release the switch trigger. The switch trigger can be locked in the OFF position. This feature can be used to prevent the possibility of accidental starting when not in use. To lock switch trigger, place the direction of rotation selector in center position. SELECTORWITH REVERSE CENTERLOCK POSITION SWITCHTRIGGER VARIABLE f Fig. 8 SPEED FORWARD Fig. 10 This tool has a variable speed switch that delivers higher speed and torque with increased trigger pressure. Speed is controlled by the amount of switch trigger depression, _ Note: You might hear a whistling or ringing noise from the switch during use. Do not be concerned, this is a normal part of the switch function. REVERSIBLE TWO SPEED See Figure 10. GEAR TRAIN See Figure 9. This tool has the feature of being reversible. The direction of rotation is controlled by a selector located above the switch trigger. With the drill held in normal operating position, the direction of rotation selector should be positioned to the left of the switch for drilling. The drilling direction is reversed when the selector is to the right of the switch. When the selector is in center position, the switch trigger is locked. Your drill has a two-speed gear train designed for drilling or driving at LO (1) or HI (2) speeds. A slide switch is located on top of your drill to select either LO (1) or HI (2) speed. When using drill in the LO (1) speed range, speed will decrease and unit will have more power and torque. When using drill in the HI (2) speed range, speed will increase and unit will have less power and torque. Use LO (1) speed for high power and torque applications and HI (2) speed for fast drilling or driving applications. TWO SPEED GEAR TRAIN(HI-LO) WARNING: Battery tools are always in operating condition. Therefore, switch should always be locked when not in use or carrying at your side. _k LO SPEED CAUTION: To prevent gear damage, always allow chuck to come to a complete stop before changing the direction of rotation or the two speed gear train (hi-lo). To stop, release switch trigger and allow the chuck to come to a complete stop. SPEED Fig. 9 12 KEYLESS ADJUSTABLE CHUCK See Figure 11. CLUTCH Your drill is equipped with an adjustable torque clutch for driving different types of screws into different materials. The proper setting depends on the type of material and the size of screw you are using. A keyless chuck has been provided with your drill to allow for easy installation and removat of bits. As the name implies, you can hand tighten or release drill bits in the chuck jaws. Arrows on the chuck indicate which direction to rotate the chuck sleeve in order to LOCK (tighten) or UNLOCK (release) the chuck jaws. Loosen the chuck sleeve by rotating it counterclockwise with one hand. Insert drill bit straight into the chuck the full length of the jaws, and tighten securely by rotating the chuck sleeve in clockwise direction. TO ADJUST UNLOCK (Release) TORQUE • Identify the twenty four torque indicator settings located on the front of your drill. See Figure 12. • Rotate adjusting ring to the desired setting. 1 - 4 For driving small screws. 5 - 8 For driving screws into soft material. 9 - 12 DRILLBIT For driving screws into soft and hard materials. • 13 - 16 For driving screws in hard wood. • 17 - 20 For driving large screws. • 21 --_11 For heavy drilling. Note: Remember the two-speed feature (HI-LO) when setting torque. The amount of torque will vary depending on which speed setting you have your drill-driver. Switching to LO speed will increase torque. Switching to HI speed will decrease torque, CHUCKJAWS LOCK (Tighten) CHUCKSLEEVE ,_ TORQUE ADJUSTINGRING TO DECREASE TORQUE / Fig. 11 WARNING: Do not hold chuck sleeve with one hand and use power of the drill to tighten chuck jaws on drill bit. Chuck sleeve could slip in your hand or your hand could slip and come in contact with rotating drill bit. This could cause an accident resulting in serious personal injury. TOINCREASE TORQUE Fig. 12 13 ,_ When drilling hard smooth surfaces use a center punch to mark desired hole location. This will prevent the drill bit from slipping off center as the hole is started. However, the low speed feature allows starting holes without center punching if desired. To accomplish this, simply operate your drill at a low speed until the hole is started. The material to be drilled should be secured in a vise or with clamps to keep it from turning as the drill bit rotates. WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. APPLICATIONS (Use drill-driver only for the purpose listed below) • Drilling in wood. • Drilling in ceramics, plastics, fiberglass, and laminates. Hold tool firmly and place the bit at the point to be drilled. Depress the switch trigger to start tool. • • Drilling in both hard and soft metals. Using driving accessories, such as driving screws with screwdriver bits. • Mixing paints. Move the drill bit into the workpiece applying only enough pressure to keep the bit cutting. Do not force or apply side pressure to elongate a hole. ,_ DRILLING See Figure 13. WARNING: Be prepared for binding or bit breakthrough. When these situations occur, drill has a tendency to grab and kick opposite to the direction of rotation and could cause loss of control when breaking through material. If not prepared, this loss of control can result in possible serious injury. When drilling metals, use a light oil on the drill bit to keep it from overheating. The oil will prolong the life of the bit and increase the drilling action. I If the bit jams in workpiece or if the drill stalls, release switch trigger immediately. Remove the bit from the workpiece and determine the reason for jamming. I J Fig. 13 14 CHUCK Insert hex key in chuck and tighten chuck jaws securely. Tap sharply with a mallet in a counterclockwise direction. This will loosen chuck on the spindle. It can now be unscrewed by hand. See Figure 16. REMOVAL See Figures 14, 15, and 16. The chuck must be removed in order to use some accessories. To remove: • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 10. • Insert a 5/16 inch or larger hex key into the chuck of your drilland tighten the chuck jaws securely. • Tap the hex key sharply with a mallet in a clockwise direction, See Figure 14. This will loosen the screw in the chuck for easy removal. MALLET CHUCKJAWS Fig. 16 TO RETIGHTEN HEXKEY A LOOSE CHUCK The chuck may become loose on spindle and develop a wobble. Periodically check chuck screw for tightness. KEYLESS CHUCK To tighten, follow these steps: Fig. 14 Open chuck jaws and remove hex key. Remove the chuck screw by turning it in a clockwise direction. See Figure 15. Note: The screw has left hand threads. SCREWDRIVER Fig. 15 15 • Lock the switch trigger by placing the direction of rotation selector in center position. See Ftgure 10. • Open the chuck jaws. • Insert hex key into chuck and tighten chuck jaws securely. Tap hex key h sharply with a mallet in a clockwise direction. This will tighten chuck on the spindle. • Open the chuck jaws and remove hex key. • Tighten the chuck screw. Note: The chuck screw has left hand threads. ,_ Do not abuse power tools. Abusive practices can WARNING: When servicing use only identical Craftsman replacement parts. Use of any other parts may create a hazard or cause product damage. damage tool as well as workpiece. Only the parts shown on parts list, page 17, are intended to be repaired or replaced by the customer. All other parts should be replaced at a Sears Service Center. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc. ,_ ,_ WARNING: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc. come in contact with plastic parts. They contain chemicals that can damage, weaken, or destroy plastic. WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. BATTERIES The battery pack for your drill-driver is equipped with nickel-cadmium rechargeable batteries. Length of service from each charging will depend on the type of work you are doing. The batteries in this tool have been designed to provide maximum trouble free life. However, like all batteries, they will eventually wear out. Do not disassemble battery pack and attempt to replace the batteries. Handling of these batteries, especially when wearing rings and jewelry, could result in a serious burn. • Store and charge your batteries in a cool area. Temperatures above normal room temperature will shorten battery life. • Never store batteries in a discharged condition. Recharge them immediately after they are discharged. • All batteries gradually lose their charge. The higher the temperature the quicker they lose their charge. If you store your tool for long periods of time without using it, recharge the batteries every month or two. This practice will prolong battery life. To obtain the longest possible battery life, we suggest the following: BAI-FERY PACK FOR RECYCLING To preserve natural resources, please recycle or dispose of batteries properly. This product contains nickel-cadmium batteries. Local, state or federal laws may prohibit disposal of nickel-cadmium batteries in ordinary trash. A Consult your local waste authority for information regarding available recycling and/or disposal options. The following recommended accessories are currently REMOVAL AND PREPARATION WARNING: Upon removal, cover the battery pack's terminals with heavy duty adhesive tape. Do not attempt to destroy or disassemble battery pack or remove any of its components. Nickel-cadmium batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and/or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury. available at Sears Retail Stores. • 6-Pc. Extra Length Magnite Power Bit Set • High Speed Bits ...... 1/2 in. Max. • 30-Pc. Power Screwdriver/Nutdriver Set and Case • Wood Boring Bits......1-1/2 • 17-Pc. Power Screwdriver/Nutdriver Set and Case _ WARNING" The use of attachments or accessories not listed might be hazardous. 16 in. Max. CRAFTSMAN I 1/2 in. PROFESSIONAL CORDLESS MODEL NO. 315,267380 DRILL-DRIVER The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your CRAFTSMAN 1/2 in, PROFESSIONAL CORDLESS DRILL-DRIVER or when ordering repair parts. SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS 2 5 PARTS Key No. Part Number Description LIST Qty. 1 975379-000 Screw (Special) .................................................................................... 1 2 981503-001 Chuck (Item No. 6903321) ................................................................... 1 3 981501-001 Logo Plate ................................................................................ 4 * Item No. 1315107 5 * Item No. 9 11040 ,............ 1 Battery Pack (981403-001) .................................................................. 1 Charger (981399-001) .......................................................................... 1 Carrying Case - Not Shown ................................................................. Operator's Manual 1 or Item No. 9 11033 6 3051719 983000-186 * Can Be Purchased Thru RSOS (Retail Special Order System) 17 I Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME Call anytime, ® (1-800-469-4663) day or night (U.S.A. and Canada) www.sears.com www.sears.ca Our Home For repair of carry-in items like vacuums, lawn equipment, and electronics, call or go on-line for the location of your nearest Sears Parts & Repair Center. 1-800-488-1222 Call anytime, day or night (U.S.A. only) www.sears.com To purchase a protection agreement (U.S.A.) or maintenance agreement (Canada) on a product serviced by Sears: 1-800-827-6655 (U.S.A.) Para pedir servicio de reparaci6n a domicilio, y para ordenar piezas: 1-888-SU-HOGAR 1-800-361-6665 Au Canada s" (1-888-784-6427) (Canada) pour service 1-800-LE-FOYER en fran_ais: Mc (1-800-533-6937) www.sears.ca , EAR6 ® Registered Trademark / TMTrademark / sMService Mark of Sears, Roebuck and Co. ® Mama Registrada / ¢MMarca de Fdbrica / SMMarca de Servicio de Sears, Roebuck and Co. MC Marque de commerce / MO Marque ddpos_e de Sears, Roebuck and Co. © Sears, Roebuck and CO.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 18 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Tue Apr 03 08:59:26 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools