Craftsman 32019730 User Manual STAND Manuals And Guides L0907238
CRAFTSMAN Workbench / Project Manual L0907238 CRAFTSMAN Workbench / Project Owner's Manual, CRAFTSMAN Workbench / Project installation guides
User Manual: Craftsman 32019730 32019730 CRAFTSMAN STAND - Manuals and Guides View the owners manual for your CRAFTSMAN STAND #32019730. Home:Tool Parts:Craftsman Parts:Craftsman STAND Manual
Open the PDF directly: View PDF 
.
Page Count: 20
| Download | |
| Open PDF In Browser | View PDF |
Universal
Bench Top
TooU Work Stand
Model No.
320,19730
CAUTION:
Read, understand and follow all Safety Rules
and Operating Instructions in this Manual before
using this product..
Sears, Roebuck and Co.
Hoffman Estates, IL 61)179 U.S.Ao
Visit our Craftsman® website:
www.craftsman.com
= WARRANTY
• SAFETY
° UNPACKING
° DESCRIPTION
• ASSEMBLY
° ADJUSTMENTS
° MAINTENANCE
Warranty
Page
...........................................................
Safety Symbols
2
Page
3
Salety Instructions
........................................................................
Unpacking ..............................................................................
Pages
Page
4 -9
9
Assembly ...............................................................................
Pages
9 - 16
Maintenance .........................................................................................................
Sears Repair Parts Phone Numbers ............................................................
Page 17
Beck Cover
ONEYEAR
..........................................................
FULLWARRANTY
ON CRAFTSMAN
_ PRODUCT
If this Craftsman product lails due to a defect in material or workmanship
within one year
from lhe date of purchase, RETURN ITTO THE NEAREST SEARS STORE OR PARTS
AND REPAIR CENTER OR OTHER CRAFTSMAN
OUTLET INTHE UNITED STATES
FOR FREE REPLACEMENT,
If this Crafleman product is used for commercial
lot only 90 days from the date of purchase
or rentaf purposes
this warranty applies
This warranty gives you specific legal rights, and you may also have olher rights, which
vary from stale te state
Sears. Roebuck and Co, Hoflman Estates_ IL 60179
SAVE THESE INSTRUCTIONSf
READ ALL INSTRUCTIONSt
1
1
]
t
The purpose of safety symbols is to attract your altention Io possible dangers
The safety symbols, and tile explanalions
with them, deserve your careful
eliminate any danger. The instructions
and warnings lhey give are no substitutes
altention
understanding,
symbol warnings DO NOT by lhemsetves
for proper and
accident
prevention The
measures
t
t
Z_ WARNING: BE SURE to read and understand all safety instructions in
this manual, Including
all safety alert symbols
such as "DANGER",
"WARNING"
and "CAUTION",
BEFORE using this tool stand. Failure to follow all instructions
tisted below may result in electric shock, fire and/or serious personal injury_
SYMBOL
J
,_1
MEANING
SAFETY
ALERT SYMBOL: IndicatesDANGER,WARNING,
OR
CAUTION_ May be used in conjunction wl|h oliver symbols or plctographs.
Fatlure to obey this safety warning WILL result in death or
sedous injury to yourself or to others° Always follow the
safety precautions to reduce the risk of ffre, electric shock
and personal Injury.
t
_WARNtNG
[Z_
J
i
CAUTION
DAMAGE
Failure to
obey tothis
safety or
warning
CANAlways
result follow
in death
tf serious
injury
yourself
to others.
theor
safety precautions to reduce the risk of fire, electric shock
and personal tnlury.
I|
PREVENTION
1
t
1
1
AND INFORMATION
MESSAGES
These _nform user at important Information
andtor instructions
that couid 10ad to
equipment or other property damage _f not _al_ewed, Each message is preceded by the
word "NOTE:" as tn lhe example below:
NOTE: Equipment
are not followed.
I
Failure totoyourself
obey thisor safety
MAY damager
result In Always
personal
injury
others warning
or property
follow the safety precautions
to reduce the risk of fire,
electric shock and personal injury.
WEAR
YOUR
and/or
property
damage
may result If these
instructions
z_WARNING:
The operation of any bench top tool can
result In foreign objects being thrown Into your eyes,
whtch can result in severe eye damage. Before beginning
power tool operation,
ALWAYS wear safety goggles or
safety glasses with side shield and a full-face shield
when needed, We recommend
a Wide Vision Safety Mask
for use over eyeglasses or standard safety glasses with
side shield, available at Sears Stores or other craftsman
Outlets_
Z_ WARNING: BE SURE to read, understand and follow all safety rules and
operating
Instructions in this manual and the operator's
manual of any bench top
power tool you use with this Universal Bench Top Toot Work Stand. Failure to do
so may result in electrlc shock, fire and / or sertous personal injury,,
WORK AREA
SAFETY
1 Keep your work area cTeaa and well lit., Cluttered workbenches
and dark areas
Invite accidents,
2, DO NOT operate power tools in explosive
atmospheres,
such as In the presence
of flammable liquids, gases, or dust. Power tools create sparks which may ignile
the dust or fumes.
3
4
5
Keep bystanders,
children and visitors away while operating
a power tool_
Distractions can cause you 1o lose control
Make your workshop
cht|dproof
with padlocks and master switches Lock tools
away when no_ in use
MAKE SURE the work area has ample lighting so you can see the work and that
there are no obstruclions that wilt interiors with safe operation BEFORE using your
bench top power too] and your Universal Bench Top Tool Work Stand.
PERSONAL
SAFETY
1., KNOW your UniversalToo!
Work Stand and the bench top power tool you are
using with It, Learn the applications and limllations, as wet] as the specilic potenlta{
hazards related to this 1ool work stand and lhe bench lop power tools yell use with it
2o STAY ALERT, watch what you are doir_g and use common sense when operating
a power tool lhet is mounled to this work sland
3., DO NOT use tools white tired or under the influence af drugs, alcohol or medication
A momenl et inattention while operating power toots may result in serious personal
injury
4°
DRESS prepare.
DO NOT wear ;ease ctothing or jewelry Put! back long hair. Keep
your hair, clothing, and gloves away from moving pads, Loose clothing, or tong hair
can be caught in moving parts Air vents often cover moving parts and should
also be avoided
Z_ WARNING: MAKE SURE this universal bench top tool work stand is
properly set up and the bench top power too] you are using with It is properly
attached to the tabletop assembly,. Failure to follow eli Instructions listed on pages
9 through 12 may result _n electric shock, tire end/or serious personal injury°
5
AVOID accidental star',ing of tools. Be sure switch is in "OFF- position before plugging
in. DO NOT carry tools with your finger on the switch, Carrying tools with your linger
on the swilch or ptugging in teo_s that have the switch in the "ON" pesilion invites
accidents.
6_
REMOVE adjustir_g keys or blade wrenches before luming the toot "ON" Awrencll
that is left attached to a rotating pad o( the tool may result in parsonat Injury
7
Do not overreach°
Keep proper footfng and balance at all times, Proper loafing
and balance enables belier centre! of the tool in unexpecled situations
|
PERSONAL SAFETY conL
8o ALWAYS SECUREYOUR
WORK= Use clamps or a vise to hold work when praclicaI.
it is safer than _Jsing your hand and frees both hands to operate tool
9_,USE SAFETY EQUIPMENT. Always wear eye protection
Dust mask. non-skid
shoos, hard hat, or hearing protection must be used for appropriate conditions,
safety
I0, ALWAYS be sure the tool work stand is sat up on a flat solid surface.
This enables better control of lhe power tool that Is attached to the wo_k stand in
unexpected situations
TOOL USE AND CARE SAFETY
operating Instructions
in thls manusl and the operator's manual of any bench top
power
tool you use with
this Universal
Bench Top Tool
Work Sland,
Failure
do
Z_ WARNING:
BE SURE
to read, understand
and follow
all safety
rutes toand
so may result in e|ectric shock, fire and I or serious personal injury.
1, ALWAYS use clamps or other practical ways to secure and support the workpioee
to a stable platform_ Holding the work by hand or against your body is unstabte and
may lead 1o less of conlrol,
2
DO NOT force the tool. Use the correct tool and bit for your application.
The correcl
tool and bit will do lho job bettor and safer at the rate for which it is designed,,
3
DO NOT use the tool tf switch does not turn It '+On" or"Off".
controlled with the sw_lch ts dangerous and must be repaired
4
DISCONNECT
the plug from the power source before making any adjustments,
changing accessories
or storing the tool. Such preventive safety measures reduce
the risk of starting the tool accidentally,
5
NEVER leave the toot running.
ALWAYS turn it off,, DO NOT leave the tool until it
comes to a complete stop,
STORE Idle tools out of the reach of children and other untrained persons,, Toots
are dangerous in the hands of untrained users,
6
Any tool that cannot
7
MAINTAIN tools with oare. Keep cutting tools sharp and cloam Properly maintained
loots with sharp cutting edges are less I_kely to bind and are easier to oontrol
8
CHECK for mfsalignment
or binding
of moving parts, breakage of parts, and any
other condition Ihat may affect the roof's operation I! damaged, have the Iool serviced
before using Many accidents are caused by poorty mainlained lools.
g
USE ONLY accessories
that are recommended
for the tool being used. Accessories
that may be suitable {m' one loof may become hazardous when used on another Joel.
ELECTRICAL
bo
SAFETY
Z_ WARNING: When connecting your bench top power tool to e power supply, ]
do not permit fingers to touch the terminals of plug when installing
or removing
|
the plug from the outlet.
ELECTRICAL
SAFETY cent°
1
Double Insulated tools are equipped with a polarized
plug (one binds is wider
than the other).Thts plug wH! fit in a polarized
outlet only one way, If the plug
does not tit futiy in the outlet, reverse the plug. If it still does nol lit+ contact a qualified
etectrfcian
to inslalI a polarized culler. De net change the plug in any way
2
Doubts insuIation D eliminates the need for the three-wire grounded power
cord and grounded powet suppty system AppIicable only to Class II (double+Insulated)
lools.
'
_ WARNING:
DOES NOT take the place
precautions
when Double
operatinginsulation
this tool..
of normal safety
3+ BEFORE plugging in the tool, BE SURE that the culler voilage suppfied }s within the
voltage marked on the tool's data plate. DO NOT use "AC onty'+ rated 1eels with a DC
power supply
4. AVOID body contact with grounded surfaces,
such as pipes, radiators, ranges and
refrigerators
There is an increased risk of etectric shock it your body is grounded
5
DO NOT expose power tools to rain or wet conditions or use power tools in wet
or damp iocations_ Water entering a power loci will increase the risk of electric shock
6
INSPECT tool cords for damage. Have damaged tool cords repaired at a Sear
Service Canter_ BE SURE to stay constanlly aware o! the cord location and keep
It welf away from the moving router.
7
DO NOT abuse the cord_ NEVER use the cord to carry the toot by eric pull the
plug from the outlet., Keep cord away from heat, oil, sharp edges or moving pads..
Replace damaged cords immediately Damaged cords increase the risk of electdc sl_eck.,
EXTENSION
CORDS
Use a proper extension cord° ONLY use cords listed by Underwrilers
Laboratories {UL}
Other extension cords can cause a drop in line voltage, resulting in a toss of power and
overheating o! tool For this toot an AWG (American Wire Gauge) size of at least 14-(jauge
is recommended
[er an extension cord of 25-1t+ or less in length. Use 12-gauge [or an
extension cord o! 50-It. Extension cords 100-ft+ or longer are not recommended_
Remember+ a smaller wire gauge size has greater capacity than a larger number
(14_auge
wire has more capacity than t6
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.2
Linearized : No
Page Count : 20
Page Layout : SinglePage
Page Mode : UseNone
Producer : Goby Monitor Application version 4, 0, 0, 13
Create Date : Mon Jul 27 04:10:26 2009
Author :
Title :
Subject :
EXIF Metadata provided by EXIF.tools