Craftsman 351221060 User Manual 12 MINI LATHE Manuals And Guides L0521266

CRAFTSMAN Lathe Manual L0521266 CRAFTSMAN Lathe Owner's Manual, CRAFTSMAN Lathe installation guides

User Manual: Craftsman 351221060 351221060 CRAFTSMAN 12 MINI LATHE - Manuals and Guides View the owners manual for your CRAFTSMAN 12 MINI LATHE #351221060. Home:Tool Parts:Craftsman Parts:Craftsman 12 MINI LATHE Manual

Open the PDF directly: View PDF .
Page Count: 20

Download
Open PDF In Browser	View PDF

Operator's

Manual

12"

MINI LATHE
Model No.
351.221060

CAUTION:
Read and follow all Safety
Rules and Operating
Instructions before First
Use of this Product. Keep
this Manual with Tool.
Sears, Roebuck
V_N.

sear

S. CO rn]cra_t

and Co., Hoffman Estates, IL 60179 U.S.A.

s ma n

23139,00 Draft (01/03/05)

I

• Work area should be properly lighted.

Warranty .........................................

2

Safety Rules ....................................

2-3

Unpacking .......................................

3

Assambl_; ........................................
Installation ......................................
Operation .....................................
Maintenance ....................................

• Keep visitors at a safe distance from work area,
- Keep chtidren out of workplace. Make workshop childproof.
Use padlocks, master switches or remove switch keys to
prevent any unintentional use of power tools.
• Keep power cords from coming in contact with sharp
objects, oil, grease, and hot surfaces.

3

TOOL SHOULD

4-5

BE MAINTAINED

• Always unplug tool prior to inspection.

5-13
14

•

Consult manual for specific maintaining and adjusting prccaduFeS,

Troubleshooti ng ..................................
Parts Illustration and List ........................

FULL

ONE YEAR

15
16-17

Keep tool lubricated and clean for safest operation.
Keep all parts in working order. Check to determine that
the guard or other parts will operate property and perform
their intended function.
• Check for damaged parts. Check for alignment of moving
parts, binding, breakage, mounting and any other condition
that may affect a toots operation.

WARRANTY

If this product fails due to a defect in material or workmanship
within one year from the date of purchase, Sears will at its
option repair or replace it free of charge. Contact your nearest
Sears Service Center (1-800-4-MY-HOME) to arrange for
product repair, or return this product to place of purchase for
replacement.

•

A guard or other part that is damaged should be properly
repaired or replaced. Do not perform makeshift repairs.
(Use parts list provided to order replacement parts.)

•

If this product is used for commercial or rental purposes, this .
warranty will appty for 90 days from the date of purchase.

Never adjust attachments while running. Disconnect power
to avoid accidental start-up.
Have damaged or worn power cords replaced immediately

•

Keep cutting tools sharp for effidant and safest operation.

This warranty applies only while this product is used in the
United States.

KNOW

This warranty gives you specific legal rights and you may also
have other fights which vary from state to state.
Sears, Roebuck and Co., Dept. 817WA, Her[man Estates,
IL 60179

•

Avoid ar_.cidentalstart-up. Make sure that the tool is in the
=oil_ position before plugging in, turning on safety disconnect orac_vatingbreakers.
Do not force fool. It will work most eff]cientty at the rate for
which it was designed.
Keep hands away fromchuck,centersand othermoving parts

WARNING:
For your own safety, read all of the instructions
and precautions before operating tool.

Never leavetoctrunningunattendedTurnthepower off
and do not leave tool until
it comes to a complete stop.
Do not overreach. Keep proper footing and balance.

CAUTION: Always follow proper operating procedures as
defined in this manual -- even if you are familiar with usa of
this or similar tools. Remember that being careless for even a
fraction of a second can result in severe personal injury.
BE PREPARED

HOW TO USE TOOL

Use right tool for job. Do not force tool or attachment to do
a job for which it was not designed.
Disconnect tool when changing attachments.

Never stand on tool. Serious injury could occur if tool is
tipped or ff centers are unintentionally contacted.
Know your tool. Learn the tool's operation,
application and
specific limitations.
Handle workplace correctly. Mount firmly in holding
devices. Protect hands from possible injury.

FOR JOB

Wear proper apparel. Do not wear loose clothing, gloves,
nab
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 20
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Tue Aug 14 23:53:55 2007
Author                          : 
Title                           : 
Subject                         : 

EXIF Metadata provided by EXIF.tools