Craftsman 351229350 User Manual Shop Press Manuals And Guides L0080130

CRAFTSMAN Drill Press Manual L0080130 CRAFTSMAN Drill Press Owner's Manual, CRAFTSMAN Drill Press installation guides

User Manual: Craftsman 351229350 351229350 CRAFTSMAN Shop Press - Manuals and Guides View the owners manual for your CRAFTSMAN Shop Press #351229350. Home:Tool Parts:Craftsman Parts:Craftsman Shop Press Manual

Open the PDF directly: View PDF .
Page Count: 16

Download
Open PDF In Browser	View PDF

Operator's Manual
CRRFTSMRN
o
15" VARIABLE SPEED
FLOOR MODEL DRILL PRESS
Model No.
351.229350

CAUTION:

Read and follow

all Safety Rules and Operating
Instructions before First Use
of this Product.

Sears, Roebuck

and Co., Hoffman

16314.00 Draft (01/03/00)

Estates,

IL 60179 U.S.A.

PREPARE

Warranty..................................
SafetyRules..............................
Unpacking
..... . ...........................
Assembly.................................
Installation...............................
Operation
................................
Maintenance.............................
Troubleshooting
.............................
PartsIllustrationandList ...................

2
2-3
3
3
3-5
5-6
6-7
8
9-15

FULL ONE YEAR WARRANTY
If this product fails due to a defect in material or workmanship within one year from the date of purchase,
Sears will at its option repair or replace it free of
charge.
Contact your nearest Sears Service Center to arrange
for product repair, or return this product to place of purchase for replacement.
If this product is used for commercial or rental purposes, this warranty will apply for 90 days from the date of
purchase.
This warranty gives you specific legal rights and you
may also have other rights which vary from state to
state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman
Estates, IL 60179

BE PREPARED

FOR JOB

AREA FOR JOB

•

Keep work area clean. Cluttered work areas invite
accidents.

•

Do not use power tools in dangerous environments.

•

Do not use power tools in damp or wet locations. Do
not expose power tools to rain.

•

Work area should be properly lighted.

•

Proper electrical receptacle should be available for
tool. Three prong plug should be plugged directly
into properly grounded, three-prong receptacle.

•

Extension cords should have a grounding prong and
the three wires of the extension cord should be of
the correct gauge.

•

Keep visitors at a safe distance from work area.

•

Keep children out of workplace. Make workshop childproof. Use padlocks, master switches or remove switch
keys to prevent any unintentional use of power tools.

TOOL SHOULD

BE MAINTAINED

•

Always unplug tool prior to inspection.

•

Consult manual for specific maintaining and adjusting procedures.

•

Keep tool lubricated and clean for safest operation.

•

Remove adjusting tools. Form habit of checking to
see that adjusting tools are removed before switching machine on.

•

Keep all parts in working order. Check to determine
that the guard or other parts will operate properly
and perform their intended function.

•

Check for damaged parts. Check for alignment of
moving parts, binding, breakage, mounting and any
other condition that may affect a tool's operation.

•

A guard or other part that is damaged should be
properly repaired or replaced. Do not perform
makeshift repairs. (Use parts list provided to order
replacement parts.)

WARNING:
For your own safety read all of the instructions and precautions before operating tool.
CAUTION:
Always follow proper operating procedures
as defined in this manual even if you are familiar with
use of this or similar tools. Remember that being careless for even a fraction of a second can result in severe
personal injury.

WORK

KNOW

HOW TO USE TOOL

•

Use right tool for job. Do not force tool or attachment
to do a job for which it was not designed.

•

Disconnect tool when changing accessories, such as
bits, cutters and the like.

•

Avoid accidental start-up. Make sure that the switch
is in the OFF position before plugging in.

•

Do not force tool. It will work most efficiently at the
rate for which it was designed.

•

Wear proper apparel. Do not wear loose clothing,
gloves, neckties, rings, bracelets or other jewelry
which may get caught in moving parts of machine.

•

Wear protective hair covering to contain long hair.

•

Wear safety shoes with non-slip soles.

•

Wear safety glasses complying with United States
ANSI Z87.1. Everyday glasses have only impact
resistant lenses. They are NOT safety glasses.

Keep hands away from moving parts and cutting
surfaces.

•

Never leave tool running unattended. Turn the power
off and do not leave tool until it comes to a complete
stop.

•

Do not overreach. Keep proper footing and balance.

•

Never stand on tool. Serious injury could occur if tool is
tipped or if blade is unintentionally contacted.

•

Wear face mask or dust mask if operation is dusty.

•

Be alert and think clearly. Never operate power tools
when tired, intoxicated or when taking medications
that cause drowsiness.

• Knowyourtool.Learnthe tool'soperation,applicationandspecificlimitations.
• Userecommended
accessories
(referto page13).
Useof improperaccessories
maycauseriskof
injurytopersons.
• Handleworkpiececorrectly.Secureworkwith
clampsor vise.Leavehandsfreeto operate
machine.Protecthandsfrompossibleinjury.
• Feedworkintoa bit or cutteragainstthedirectionof
rotationof bitor cutter.
•

•

Insert arbor into spindle, push arbor into spindle and
twist arbor slightly to release air trapped in taper.

•

Mount chuck onto arbor, push chuck over arbor and
twist arbor slightly to release air trapped in taper.

•

Be sure chuck and arbor are securely mounted.

MOUNT

CAUTION:
The operation of any power tool can result
in foreign objects being thrown into the eyes, which can
result in severe eye damage. Always wear safety glasses complying with United States ANSI Z87.1 (shown on
package) before commencing power tool operation.
Safety glasses are available through your Grainger catalog.

CAUTION:
Think safety! Safety is a combination of
operator common sense and alertness at all times
when tool is being used.
WARNING:
De not attempt to operate tool until it is
completely assembled according to the instructions.

TABLE

• Thread handle onto outside of crank arm (Key. Nos.
15 and 16).

CAUTION:
Be careful not to touch overhead power
lines, piping, lighting, etc., if lifting equipment is used.
Drill press weighs approximately 450 Ibs. Proper tools,
equipment and qualified personnel should be employed
in all phases of unpacking and installation.

MOUNT

Crates should be handled with care to avoid damage
from dropping, bumping, etc. Store and unpack crates
with correct side up. After uncrating drill press, inspect
carefully for any damage that may have occurred, during transit. Check for loose, missing or damaged parts.
If any damage or loss has occurred, claim must be filed
with carrier immediately. Check for completeness.
Immediately report missing parts to dealer.

•

Drill press must be mounted to flat level surface. Use
shims or machine mounts if necessary. Do not
mount drill press in direct sunlight.

•

Be sure to bolt drill press to floor securely to prevent
tipping and minimize vibration.

POWER

SOURCE

WARNING:
Do not connect drill press to the power
source until all assembly steps have been completed.

IMPORTANT: The tool has been coated with a protective coating. In order to ensure proper fit and operation,
the coating must be removed. Remove coating with mild
solvents, such as mineral spirits and a soft cloth.
Nonflammable solvents are recommended. After clean-

The motor is designed for operation on the voltage and
frequency specified. Normal loads will be handled safely on voltages not more than 10% above or below specified voltage. Running the unit on voltages which are not
within range may cause overheating and motor burnout. Heavy loads require that voltage at motor terminals
be no tess than the voltage specified on nameplate,

ing, cover all exposed surfaces with a light coating of
oil. Paste wax is recommended for table top.
NOTE: Never use highly volatile solvents. Avoid getting
cleaning solution on paint as it may tend to deteriorate
these finishes. Use soap and water on painted components.

•

Drill press requires a 115/230 volt, 60 Hz power
source.
To use the drill press with a 230V power supply,
have a qualified electrician attach a 230 volt, 20/30A
three-prong plug (not supplied) onto drill press line
cord.

Refer to Figures 4, 6 and 7.

•

DRILL PRESS

• Tighten all nuts and bolts that may have loosened
during shipment.

Drill press is shipped assembled, except for the drill
chuck with key, arbor and guard.

CHUCK

CRANK

Refer to Figure 7.
• Remove handle from inside of crank arm.

Refer to Figures 4 and 6.

DRILL

GUARD

Place clamp opening over bottom of drill press quill and
secure by tightening socket head bolt at rear of clamp
(Key. No. 1).

Turn machine off if it jams. A cutter jams when it digs
too deeply into the workpiece. (The motor force
keeps it stuck in workpiece.)

MOUNT

DRILL PRESS

Refer to Figure 4.

AND

•

ARBOR

Be sure spindle taper, arbor taper and chuck taper
are clean and dry.

Power supply to the motor is controlled by a rotary
switch.

GROUNDING

INSTRUCTIONS
Grounding

WARNING:
Improper connection of equipment
grounding conductor can result in the risk of electrical
shock. Equipment should be grounded while in use to
protect operator from electrical shock.

Lug

3-Pron

• Check with a qualified electrician if you do not
understand grounding instructions or if you are in
doubt as to whether the tool is properly grounded.

Make Sure This
Is Connected
To A Known
Ground

2-Preng Receptacle
Figure 2 - 2-Prong Receptacle with Adapter

• This tool is equipped with an approved 3-conductor
cord rated up to 240V and a 3-prong grounding type
plug rated at 115V (See Figure 1) for your protection
against shock hazards.

•

• Grounding plug should be plugged directly into a
properly installed and grounded 3-prong groundingtype receptacle, as shown (See Figure 1).

Do not use a 3-prong to 2-prong grounding adapter
unless permitted by local and national codes and
ordinances. (A 3-prong to 2-prong grounding adapter
is net permitted in Canada.)

•

Where a 3-prong to 2-prong grounding adapter is
permitted, the rigid green tab or terminal on the side
of the adapter must be securely connected to a
permanent electrical ground such as a properly
grounded water pipe, a properly grounded outlet box
or a properly grounded wire system.

•

Many cover plate screws, water pipes and outlet
boxes are not properly grounded. To ensure proper
ground, grounding means must be tested by a qualified electrician.

NOTE: If the unit is operated at 230V, a 230V plug (not
supplied) must be used.
Properly Grounded Outlet
Grounding Prong

3-Prong Plug __
Figure

•

1 - 3-Prong

Receptacle

EXTENSION

Do not remove or alter grounding prong in any manner.
In the event of a malfunction or breakdown, grounding
provides a path of least resistance for electrical shock.

WARNING:
Do not permit fingers to touch the terminals of plug when installing or removing from outlet.
•

Plug must be plugged into matching outlet that is
properly installed and grounded in accordance with
all local codes and ordinances. Do not modify plug
provided. If it will not fit in outlet, have proper outlet
installed by a qualified electrician.

•

Inspect tool cords periodically, and if damaged, have
repaired by an authorized service facility.

•

Green (or green and yellow) conductor in cord is the
grounding wire. If repair or replacement of the electric cord or plug is necessary, do not connect the
green (or green and yellow) wire to a live terminal.

•

The use of any extension cord will cause some drop
in voltage and loss of power.

•

Wires of the extension cord must be of sufficient size

•

to carry the current and maintain adequate voltage.
Use the table to determine the minimum wire size
(A.W.G.) extension cord.

•

Use only 3-wire extension cords having 3-prong
grounding type plugs and 3-pole receptacles which
accept the tool plug.

•

If the extension cord is worn, cut or damaged in any
way, replace it immediately.

EXTENSION CORD LENGTH
Wire Size

A.W.G.

Up to 25 ft................................

NOTE: Using extension cords over 25 ft. long is not
recommended.

Where a 2-prong wall receptacle is encountered, it
must be replaced with a properly grounded 3-prong
receptacle installed in accordance with National
Electric Code and local codes and ordinances.

WARNING:
Any receptacle replacement
performed by a qualified electrician.

CORDS

MOTOR
Drill press is supplied with a 2 HP (max developed)
motor.

should be

The 120 Volt AC universal motor has the following
specifications:

A temporary 3-prong to 2-prong grounding adapter
(See Figure 2) is available for connecting plugs to a two
pole outlet if it is properly grounded.

Horsepower(Maximum Developed)...................
Voltage ..............................
Amperes ................................
Hertz ....................................
Phase ................................
RPM ..................................

2
115/230
14/7
60
Single
1150

ELECTRICAL

CONNECTIONS

WARNING:
Operation of any power tool can result in
foreign objects being thrown into eyes which can result
in severe eye damage. Always wear safety goggles
complying with United States ANSI Z87.1 (shown on
package) before commencing power tool operation.

WARNING:
All electrical connections must be performed by a qualified electrician. Make sure unit is off
and disconnected from power source while motor is
mounted, connected, reconnected or anytime wiring is
inspected.

•

Know general power tool safety. Make sure all precautions are understood (see pages 2, 3, and 5).

•

Drill press motor can be wired for 115 or 230 volts,
single-phase operations.

•

Always wear eye protection or face shield.

•

Motor must rotate in clockwise direction facing shaft
end of motor

•

Do not wear loose clothing, gloves, neckties, rings,
bracelets or other jewelry.

•

See wiring diagram (Figure 3) for wiring instructions,
single-phase operation.

• Whenever adjusting or replacing any parts on drill
press, turn switch off and remove plug from power
source.

115V

230V

•

Make sure all moving parts are free from interference.

•

When drilling in material that causes dust, a dust
mask shall be worn.

•

Non-slip footwear and safety shoes are recommended.

•

Do not plug in drill press unless switch is in "off"
position. After turning switch on, allow drill press to
come to full speed before operating.

•

Keep hands clear of all moving parts.

•

Use recommended speed for drill accessory and
workpiece material.

•

Drill press head and table shall be securely locked to
column before operating drill press. This must always
be checked prior to starting machine.

•

Secure workpiece using either clamps or a vise to
drill press table.

•

Never brush away any chips while machine is in
operation. All clean up should be done when
machine is stopped.

•

Make sure the machine is securely mounted to floor.

•

Make sure drill bits are properly secured.

•

Make sure drills are sharp.

•

Disconnect power when changing bits.

•

Keep lightly lubricated as directed,

•

Always keep hands and fingers clear of the
descending head and the turning bit.

•

Make sure all included covers and guards are in
place and secured before operating the drill press.

•

Do not leave drill press running when it is unattended.

•

Keep children away from the drill press at aUtimes.

•

Do not operate drill press when you are tired, ill or on
medications that affect your emotional or physical stability.

1,2, 3, 4, 5,6Motor Leads
L1, L2 - Digital Readout Leads
U, V Power Supply
Figure 3 - Motor and Digital Readout Wiring Diagram

DESCRIPTION
Craftsman 15" Variable Speed Professional Drill Press
features a fine grain cast iron base, table and head.
Spindle speeds are infinitely variable from 300 to 3300 1
RPM. Drill press includes arbor with Jacob taper #6,
chuck with key and drill press guard. Spindle travels 5" !
and has scale and depth control,
i
Large 12Y8x 16" table rotates around column. Table
surface is precision ground and features T-slots, water
trough and easy height adjustment to handle most
drilling operations. 1 HP motor can be wired for 115 or
230 volt operation.

SPECIFICATIONS
Infinitely Variable Speed ............
Table size ...........................

300-3300 RPM
127/8x 16"

T-stots .............................

2 each, %"

Swing ..................................

15"

Arbor taper ......................
Quill diameter ...........................

Jacob taper #6
2.16"

Spindle diameter .........................
Maximum distance table to spindle
Overall height: ...........................
Shipping weight: ........................
OPERATION

SAFETY

1.74"
...........

25'/2"

• Turn switch off and disconnect power whenever drill
press is not in use.

70'/,"
450 Ib

•

RULES

WARNING:
For your own safety, read all of the
instructions and safety precautions before operating drill
press.

Keep drill press maintained. Follow maintenance
instructions (see pages 6 and 7).

SPEED

ADJUSTMENT

Pull plunger pin out and pivot guard assembly up.
After changing bit and before operating drill press,
be sure to flip guard assembly down with plunger
seated securely in clamp.

WARNING:
Be sure motor is running when adjusting
spindle speed. Damage to drill press may result if spindle speed is adjusted when motor is at rest.
Refer to Figure 5.

MOUNT

•

Spindle speed is read from digital readout (Key. No.
2) located on front of drill press.

WARNING:
Be sure drill press is turned off and is disconnected from power source before adjusting speeds.

•

Spindle speed can be adjusted only when the motor is
running.

•

Place drill bit in jaws of drill chuck.

•

Tighten chuck with drill chuck key. Be sure to tighten
the chuck using all three key positions on the chuck
body and remove chuck key.

• Turn on the drill press. Rotate speed change handwheel (Key. No. 22) until readout indicates the
desired spindle speed. (Speeds on readout represent spindle RPM)
TABLE
•

Table can be raised and lowered on column and can
also be rotated about the column.

•

To raise table, loosen table lock handle (Key. No. 23),
rotate crank arm handle (Key. No. 15) until table is in
desired position. Be sure to secure table position by
tightening table lock handle.
To rotate table about column, loosen table lock handle and rotate table to desired position. Be sure to
secure table position by tightening table lock handle.

HEAD ADJUSTMENT

WARNING: Turn the switch "off" and unplug drill press
from power source before maintaining or lubricating drill
press.

LUBRICATION
Refer to Figures 5, 6 and 7.
Keep quill and column lubricated with light oil or lubricant such as WD-40. Use 20 wt. non-detergent oil for oil
lubrication. Use a general purpose grease for grease
lubrication.
MONTHLY
•

Spindle splines: lower quill assembly and pour 6-8
drops of oil into hole in center of cap (Figure 5, Key.
No. 32).

•

Speed change fork: oil speed change fork and link
(Figure 5, Key. Nos. 15 and 16) through hole in fork.

•

Quill rack: Lowerquill assembly and oil rack (or gear
teeth) on back of quill. (Figure 6, Key. No. 23). Raise
and lower quill several times to spread oil across
rack.

•

Rack: oil teeth evenly or rack (Figure 7, Key. No. 6).

Refer to Figure 6.
To rotate head about column, loosen head locking handle (Key. No. 44) and rotate head to desired position. Be
sure to secure head position by tightening head locking
handle.

DEPTH

STOP ADJUSTMENT

Refer to Figure 6.
• To control drilling depth, loosen locking knob (Key.
No. 12) inside feed handle hub (Key. No. 11). Rotate
graduated collar (Key. No. 8) so desired depth is indicated on collar next to the indicator line. Tighten the
locking knob. Use this feature to drill more than one
hole to the same depth.
•

Spindle can be locked in either fully or partially down
position. Loosen locking knob (Key. No. 12). Lower
chuck to the desired depth, rotate graduated collar
(Key. No. 8) fully clockwise and tighten the locking
knob. Use this feature to set up and align work.

GUARD

ADJUSTMENT

Refer to Figure 4.
•

•

BIT

ADJUSTMENT

Refer to Figure 7.

•

DRILL

Lower guard will automatically slide into upper guard
as drill press is operated. Be sure lower guard slides
smoothly in and out of upper guard
Lower guard position can be locked by tightening
adjustment knob (Key. No. 4) with lower guard in
desired position.
Upper and lower guard assembly can be flipped up
out of the way for easy cutting bit changes.

YEARLY
Gearbox: remove gear box cover (Figure 5, Key. No. 18)
and remove old grease. Repack gear box with grease
and replace gear box cover.

REPLACE

WORN VARIABLE

SPEED

BELT

NOTE: Lower motor pulley is spring loaded. Take care
not to pinch fingers between pulleys or between pulley
and belt.
Refer to Figure 5.
•

Set drill press at lowest speed while motor is running.

•

Turn drill press off and disconnect from power source.

•

Remove socket head bolt and handwheel (Key. Nos.
21 and 22).

•

Remove flat head screws and plastic cover (Key.
Nos. 3 and 4).

•

Remove socket head bolts and pulley cover (Key.
Nos. 7 and 1).

•

Loosen hex nuts (Key. No. 56) on hex head bolts
(Key. No. 64). Pivot motor mount plate (Key. No. 63)
towards head.

belt between pulleys. Be careful not to pinch fingers
between pulley and belt.
•

• Slip variable speed belt (Key. No. 46) off spindle pulleys (Key. Nos. 34 and 35).

Pivot motor away from head and secure position with
hex nuts.

•

Replace pulley cover, plastic cover and handwheel.

•

Remove belt from motor pulleys. The lower motor
pulley (Key. No. 50) may need to be pushed down to
remove belt.

•

Rotate speed change handwheel firmly counterclockwise until resistance is felt.

•

Slide new belt between upper and lower motor pulleys (Key. Nos. 49 and 50).

•

Slide lower motor pulley do_n and place belt
between pulleys as close to motor shaft as possible.

•

Slide belt between spindle pulleys on one side.

•

Rotate upper spindle pulley and belt by hand to slide

CLEAN

MOTOR

Frequently blow out any dust that may accumulate
inside motor, If power cord is worn, cut or damaged in
any way, have it replaced immediately. For motor lubrication, follow instructions on motor plate,

SYMPTOM

POSSIBLE CAUSE(S)

CORRECTIVE ACTION

Spindle does not turn

1. No power to drill press

1. Check wiring, fuse or
circuit breaker

2. Defective switch
3. Defective motor

2 Replace switch
3. Replace motor

Noisy spindle

Defective bearings

Replace bearings

Noisy operation

1. Worn variable speed belt

1. Replace belt, See Replace
Worn Variable Speed Belt, page ?
2. Lubricate spindle,
See Lubrication, page ?
3. Check motor pulleys; tighten as
necessary

2. Dry spindle
3. Loose pulley
Excessive spindle runout

Worn or defective bearings

Replace bearings

Drilled holes not round

1. Improper mounting of drill bit,
chuck or arbor
2. Worn or broken bit

1. Mount properly

3. Speed or feed toe fast
4. Workpiece drilling needs
lubrication

3. Reduce speed or feed as needed
4. Use cutting fluid

2. Replace bit

Model 351.229350
Figure 4 - Replacement

Parts Illustration

for Guard

KEY
NO.
1

PART NO.
02580.00

DESCRIPTION
'/,-20 x 1'12"Socket Head Bolt

2
3

08431.00
08432.00

Spring (set of 2)
Lower Guard

1
1

08433.00

Adjustment

08434.00

Shield with Mounting

08912.00

Guard (Key Nos. 1-5)

Standard hardware item available locally.

Knob Assembly
Pin

QTY.
1

1
1

Model351.229350

Figure 5 - Replacement

Parts Illustration

for Head

14
12
,J

I i
23

49
50
51
8

/
57
58

_"65

KEY
NO.
1
2
3
4

PART NO.

DESCRIPTION

15840.00

Pulley Cover
Digital Readout with Screws
5-0.8 x 12mm Flat Head Screw
Cover

15841.00
05318.00

15171.00
16422.00

6
7

15842.00
03806.00

8
9

STD851006
15843.00

10
1
12
13
14
15

116

15844.00
15135.00
16019.00
09732.00
08529.00
15845.00

QTY.

PART NO.

38
39

15184.00
16000,00

40
41
42

05331.00
05358.00
00179.00

43
44

06182.00
16001.00
16002.00

DESCRIPTION
, Gear Box
Bottom Plate
5-0.8 x 12mm Socket Head Bolt
12-1.75mm Fiber Hex Nut

QTY.

6-1.0 x 20mm Socket Head Bolt
6-1.0 x 30mm Socket Head Bolt

2
2

Bracket
Threaded Link

1
1

16003.00
16O04.00

Variable Speed Belt
8-1.25 x 30mm Hex Flange Bolt

1
1

48
49
50

16005.00
16006.00
16007.00

1
1

1
3
3

51
52
53

16008.00
160O9.00
01022.00

12 x 30 x 2mm Spacer
Upper Mutor Pulley
Lower Motor Pulley
Spring

1
1

54
55

Threaded Link
1
Plate
1
5-0,8 x 16mm Socket Head Bolt ' 4

56
57
!58

16010.00
07885.00
STD840812

5mm Flat Washer*
6-1.0 x 16ram Socket Head Bolt
Handwheel

Front Cover
6-1.0 x 10mm Socket
Head Bolt
16mm Flat Washer*
Left Plate
Right Plate
Clamp
Readout Cord
8-1.25 x 35mm Socket Head Bolt
8-1.25mm Fiber Hex Nut
Fork
Link

17
18
19
20
21
22

00814.00
STD851005
01760.00
15849.00

23
24

15174.00
15175,00

25
27

15176.00
16423.00
15177.00

28
29
30
31

15178,00
15179.00
05284.00
15180.00

Bushing
Bushing
5-0.8 x 25mm Socket Head Bolt
Shaft

15181.00

Cap

33
34
35
36

16424.00
15182.00
15183.00
16303.00

15127.00

6008ZZ Bearing
Upper Spindle Pulley
Lower Spindle Pulley
5 x 5 x 16mm Key
Spindle Shaft

#6-24 x 3/8"Thread Forming
Screw

15846.00
15847.00
15848.00

t
1
4

KEY
NO.

Shoulder Bolt
Handle
Worm Gear
5-0.8 x 4mm Set Screw
Worm

1
14

45
46
47

16
!
1
2

6
1
t
1

61
162
63
64

00865.00
STD852008
16011.00
16O12.00
STD551137
STD836020
16O13.00
STD835050

1
1
1

5 x 5 x 40mm Key
8-1,25mm Hex Nut*
8-1.25 x 20mm Hex Head Bolt

1
6
2

8mm Look Washer*
Bracket

4
1
1
2

3/8-16x 9" Hex Head Bolt
3/8"Lock Washer*
10-1.5 X 20mm Hex Head Bolt*
Motor Mount Plate
8-1.25 x 50mm Hex Head Bolt*

1
1

66
57

$TD541037
07860.01
STD541010

3/8"-16Hex Nut*
Line Cord

1
1
1

68
69
7O

16014.00
STD11003
18015.00

Cord Clamp
#10-24 x 3/8"Pan Head Screw*

1
1
1
1

71
72
73
74

07862.02
07863.00
02434,00
01413.00

2
1

75
A

STD852010
16314.00

Spring Cap
3AMI-28 Retaining Ring
Motor

Standard hardware item available locally,
Not Shown

4
2

#10-24" Hex Nut

Motor Cord
Motor Cord Covet
Strain Relief
Strain Relief
Strain Relief
10mm Lock Washer*
Operator's Manual

1
1
1
1
1
1
4
1

Model 351.229350

Figure 6 - Replacement Parts illustration for Lower Head Components

3236
jl
_,

45
44

5
6

26
28
27

22 _._--,-_- 0

2oJ
)

197
18 "_"

_..17
S

KEY
NO.
1
2
3
4
5
6
7
8
9
10
11
12

PART NO.

DESCRIPTION

16016,00

Head

07826.01
01760,00
02576.00

Flange
6-1.0 x 16mm Socket Head Bolt

STD841015

10-1.5rnm Hex Nut*
4 x 15mm Dowel Pin

16017.00
07828.00
07829.00
01323.00
07835.00

13
:14

07830.00
07834.01
07832.00
07833,00

15
16
17

07831.00
00501.00
07845.00

18
19
20

07936.00
08922.00
07842.01

21
22

02627.00
08924.00

07841.01

10-1.5 x 40mm Dog Point
Set Screw

Collar
Graduated Collar
6-1.0 x 30mm Hex Head Bolt
Square Washer
Feed Handle Hub
Lock Knob
6-1.0 x 16mm Flat Head Screw
6 x 32 x 5mm Spacer
Feed Handle with Knob
Chuck Key
Chuck with Key (Key No. 16)
MT3/JT6 Arbor
3BMI-72 Retaining
Spindle

KEY
NO.

PART

1
1

24
25

00989.00
00256,00

6
1

26
27
28

29
30

08641.00
STD541010
01474.00
STD551010

QTY.

Ring

6207ZZ Bearing
3AMI-35 Retaining Ring
Quill

2
1
1
1

31
32
33

1
1
1

34
35
36

1
1

37
38

3
1
1
1
1

39
40
41
42
43

1
1

!48

1
1

DESCRIPTION

147

QTY.
1
1

_204ZZ Rearing
3AMI-20 Retaining Ring
Rubber Ring
#10-24 Hex Nut*
#10 Serrated Washer

1
2
2

#10 Flat Washer*
#10-24 x 3/4"Pan Head Screw*

STD511007
16018.00
07821,00

Switch
Spring
Spring Housinq
Pinion

07824.00
15130.00

1
1
1
2
1
1

6 x 6 x 36mm Key
6006ZZ Bearing

08637.00
15131.00
15132.00
15107.00

Spindle Flange
Collar
4-0.7 x 4ram Set Screw
6mm Flat Washer*

STD851006
16425.00
15133.00
15172.00
15173.00

16310.00

2
2
1
1
1

Spring Cover

07822.00
}7823.00

15170.00

!46
I

NO.

1
3

3-0.5 x 20mm Socket Head Bolt
Sensor

2
1

Head Locking Handle
Bushing

1
1

Bushing
'/2-12 x 3Y2" Hex Head Bolt

1
1

Standard hardware item available locally.
Not Shown
Recommended
A

Accessories

Sanding Drum Kit.

9-25262

2` 4" Angle Vise

9-24085

2` 4" Drill Press Vise

9-24093

9-24073

4" Standard Vise

2` 4" Quick Grip Vise

9-24081

2` 6" Standard Vise

9-24075

6" Drill Press Vise

9-24095

6" Cross Vise

9-24089

69-Piece Clamping Kit

9-26426

Model351.229350

Figure

7 - Replacement

Parts Illustration

for Base and Table

17
17

KEY
NO.

PART

NO.

DESCRIPTION

QTY.
1

15134.00

15161.00

Column Assembly
Base

16311.0O

12-1.75 x 25mm Socket Head Bolt

STD852012

12mm Lock Washer*

STD851012

12ram Flat Washer*

15136.00

Rack

15163.00

Table

15164.00

Collar

00351.00

6-1.0 x 10mm Set Screw

05989.00

15165.00

3AM1-14 Retaining Ring
Shaft

15166.00

Worm Gear

15167.00

Cover

01393.00

'/,-20 x '/_" Socket Head Bolt

05811.00

Handle

07812.01

Crank Arm

117

15168.00
00179.00

Bushing
6-1.0 x 20mm Socket Head Bolt

i18
19

15169.00

Worm Shaft

16310.00

%-12 x 3'J_"Hex Head Bolt

15170.00

Bushing

15173.00

Bushing

15172.00

Table Locking Handle

Standard hardware item available locally.

In U.S.A. or Canada
for in-home major brand repair service:
Call 24 hours a day, 7 days a week

1-800-4-MY-H O M ES°(1-800-469-4663)
Para pedir servicio de reparaci6n

a domicilio

Au Canada pour tout le service - 1-877-LE-FOYER

For the repair or replacement

- 1-800-676-5811
_M(1-877-533-6937)

parts you need:

Call 6 a.m. - 11 p.m. CST, 7 days a week

PartsDirect "
1-800-366-PART
www.sea

Para ordenar

piezas

(1-800-366-7278)

rs.com/partsdirect

con entrega

a domicilio

- 1-800-659-7084

For the location of a Sears Service Center in your area:
Call 24 hours a day, 7 days a week

1-800-488-1222
To purchase

or inquire about a Sears Maintenance

Agreement:

Call 7 a.m. - 5 p.m. CST, Monday - Saturday

1-800-827-6655
IF-

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 16
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Tue Aug 14 10:16:47 2007
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

Craftsman 351229350 User Manual Shop Press Manuals And Guides L0080130

CRAFTSMAN Drill Press Manual L0080130 CRAFTSMAN Drill Press Owner's Manual, CRAFTSMAN Drill Press installation guides

Navigation menu

Versions of this User Manual:

Views

Navigation