Craftsman 351240870 User Manual CROSS VISE Manuals And Guides L0522334
CRAFTSMAN Vise Manual L0522334 CRAFTSMAN Vise Owner's Manual, CRAFTSMAN Vise installation guides
User Manual: Craftsman 351240870 351240870 CRAFTSMAN CROSS VISE - Manuals and Guides View the owners manual for your CRAFTSMAN CROSS VISE #351240870. Home:Tool Parts:Craftsman Parts:Craftsman CROSS VISE Manual
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
Operator's Manual £RRFTSMRNo CROSS VISE Model No. 351.240870 - 3" 351.240890 - 6" 351.240910 - 8" CAUTION: Read and follow all Safety Rules and Operating Instructions before First Use of this Product. • • • • • • Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. 15067.01 Draft (05/26/00) Safety Assembly Operation Maintenance Parts List EspaSol • Secure with dog point set screw (Fig. 1, No, 19) Warranty Safety ....................................... Ru_es .................................... Assembly ...................................... Operation ...................................... Maintenance • Mount crank handles (Fig. 1, No. 12) to longitudinal and cross feed screws (Fig. 1, Nee. 8 and 9) using acorn nuts (Fig. 1, No. 13), • This vise is shipped with a protective coating. This coating should be removed before operation. Remove protective coating with penetrating oil 2 2 2 2 ........................... ......... 3 Parts Illustration and List ......................... 4-5 Espa6ol 6-7 ...................................... DESCRIPTION FULL ONE YEAR WARRANTY CROSS VISES Cross Vises travel on two separate axes---longitudinal and cross, to permit accurate positioning of workplace. Body, saddle, base and jaws are made of high strength cast iron, Vise leadscrew, longitudinal and cross feed screws are precision ground carbon steel. ON CRAFTSMAN If within one full year from the date of purchase, this Craftsman Cross Vise fails due to a defect in material or workmanship, Sears will repair it free of charge. • Mount vise to work surface in desired location by secudng at least two mounting flanges located on base (Fig, 1, No, 1). Warranty service is available by simply returning the Cross Vise to the nearest Sears Store or Service Center throughout the United States, • Move saddle (Fig, 1, No. 3) by rotating longitudinal crank handle (Fig. 1, No. 12). lqghtan center set screw (Fig. 1, No. 6) to secure position. This warranty gives you specific legal rights and you may have other rights which vary from state to state. • Move body (Fig. 1, No. 16) to desired position by rotating crossroad crank handle (Fig. 1, No. 12). Tighten center set screw (Pig. 1, No. 6) to secure position. Beam, Roebuck and Co., Dept 817WA, Hoffman Estates, IL 60179 • Open jaws of vise. Place workpiece between jaws in desired position. Rotate movable jaw leadserew (Fig. 1, No. 14) to secure workpiece between jaws. Be sure workpiece is secure in vise before starting machining operation. • Understand and obey all safety instructions supplied with drill press, mill, or other machines on which vise is used. • SPECIFICATIONS Bolt or clamp vise to work surface in at least two mounting locations using mounting flanges provided on base. • Be sure workpiece is clamped securely between jaws before starting machining operation, • Do not over tighten---vise can develop a large clamping force, Use only force which is needed. • Do not pound or hammer on workpiece. This vise is designed to clamp the workplace in a desired position for machining operations only. MODEL 240870, 3n VISE Refer to Figure 1. • This vise is shipped with a protective coating.This coating should be removed before operation. Remove protective coating with penetrating oil. 240890 AND 240910, 5" (240870) 8" (240890) 8_ (240910) Cross travel (front to back) ................. ..................................... ..................................... 5" (240870) 6" (240890) 8" (240910) Jaw Width .............................. ..................................... ..................................... 3" (240870) 6_ (240890) 8" (240910) Maximum Jaw Opening ................... ..................................... ..................................... 3" (240870) 6"(240890) 6"(240910) Value el One Divimon * Mount crank handles (Fig. 1, No. 12) to longitudinal and cross feed screws (Fig. 1, Nos. 8 and 9) using acorn nuts (Fig. 1, No. 13). MODELS Longitudinal travel (left to right) .............. ..................................... ..................................... 6" AND 8" VISES Refer to Figure 1. • Thread movable jaw Isadscrew (Fig. 1, No. 14) through end of body (Fig. 1, No. 16) and into hole in movable jaw (Fig. 1, No. 18). 2 ................ 0.0039"(240870) ................................. 0.0039 _ (240890) ................................. 0.0039"(240910) Cross Travel per One Revolution ........ ................................. ................................. 0.1181" (240870) 0.1575" (240890) 0.1575" (240910) Longitudinal Travel per One Revolution ... ................................. ................................. 0.1181" (240870) 0.1575"(240890) 0.1575" (240910) Particles of metal or wood can damage machined surfaces, causing difficult or inaccurate operation. ,* Keep machined surfaces a_ndall moving parts clean and free of dirt, chips and foreign materials. • Keep machined surfaces and.leadscrews lubricated with medium weight machine oil GIB AD3USTMENT Refer to Figure 1. • Adjust gibs (Fig. 1, No. 4) by tightening the set screws (Fig. 1, Nos. 6 and 23) at each end of the g[bs. • Adjust the screws until a slight drag is felt when rotating the crank handles (Fig. 1, No. 12). Secure screws by tightening nuts (Fig. 1, No. 5). Model 351.240870,351.240890 Figure 1 - Replacement Parts Illustration & 351.240910 for 3", 6" and 8" Cross Vises 13 24 12 11 10 4 KEY NO. PART NO. FOR: 3"-240870 6"-240890 8"-240910 DESCRIPTION QTY. 1 9880.00 9900.00 9900.00 Base I 2. 9881,00 9901.00 9901.00 Nut 3 9882.00 I 1 9883.00 STD840610 9902,00 9903.00 Saddle 4 5 9902.00 9903.00 Gib 2 STD840610 STD640610 1640.00 6-1.0mm Hex Nut* 6-1,0 x 16ram Set Screw 6 6 5110,00 5110,00 6-1.0 x 20mm Set Screw 4 6 4 7 9884.00 9884,00 9884.00 1/8" Ball 2 8 9898.00 2658.00 2655.00 9866.00 9906.00 9906.00 Longitudinal Feed Screw Cross Feed Screw I 9 10 9887.00 9907.00 9907.00 11 1760.00 11 12 0483.00 0483.00 8-1.25 x 25ram Socket Head Bolt 15068.00 15069.00 15069.00 15017.00 15017.00 15017.00 Crank Handle Assembly 6-1.0 mm Acorn Nut 2 13 14 6861.00 6877.00 9742.00 Leadscrew with Handle I 15 6860.00 6876.00 9743.00 Guide Rod I t6 9892.00 9912.00 9744.00 17 3806.00 Body 6-1.0 x lOmm Socket Head Bolt I 4 8-1.25 x 14ram Socket Head Bolt 4 8-1.25 x 25ram Socket Head Bolt Movable Jaw 4 6-!.0 x 12mm Dog Point Set Screw Jaw Plate Grooved Jaw Plate I 2661.00 17 17 - 0483.00 16 6862.00 6879.00 9747.00 19 9458.00 9456.00 9458.00 20 21 6863,00 6864,00 6882.00 9748.00 6883.00 9749.00 22 9897.00 9918.00 9918.00 23 1640.00 23 24 Retaining Plate 6-1.0 x 16ram Socket Head Bolt 16365.00 16365.00 STD852006 I I 4 4 2 I I I I Retaining Plate 6-1.0 × 16ram Set Screw 2 6-1.0 x 25mm Set Screw 2 6mm Lock Washer 4 24 STD852008 STD852008 6mm Lock Washer 4 25 & STD851006 15067.01 STD851006 15067.01 6ram Flat Washer 2 Operator's Manual 1 15067.01 Standard hardware item available locally _. Not Shown Recommended Accessories t_ 3" Prismatic Jaw 9-24096 ,', 6" Prismatic Jaw 9-24098 8" Prismatic Jaw 9-24099 5 PRENSA DE TORNILLO TRANSVERSAL Modelo No. 351.240870 351.240890 351.240910 MODELO 240870 PRENSA DE TORNILLO nefi6rase - 7,6 cm - 15,2 cm - 20,3 cm • Esta prensa de tomillo se envfa con una c.apa protectora, MODELOS 240890Y LO CMY DE 15,2 Refi6rasa 2-3 4-5 6 Reglas de Seguridad ................................... 6 Operaci6n .......................................... 6-7 Mantenimiento ........................................ 240910, 20,3 PRENSAS la Remueva la DE TORNIL- CM ala Figura 1. • Atomille el tomillo de entrada de la mordaza rn6vil (Fig. 1, No. 14) hasta el extremo del cuerpo (Fig. 1, No. 16) yen el agujern de la mordeza mbvil (Fig. 1, No. 18). • ASegL_relo con un tornillo de fijaci6n del punto de sujeci6n (Fig. 1, No. 19). 6 Montaje ............................................. CM que se tiene que remover antes de la operaci6n. cape protectora con aceite penetrante. PRECAUCION: Lea este manual y siga las Reglas de Seguridad y las Instrucciones de Operaci6n, antes de usar este producto por la primera vez. IlustTaci6n y Usta de Partes ............................. Garantia ............................................. DE 7,6 1. Monte los mangos de ]a manivela (Fig. 1, No. 12) a los tomillos de avarice longitudinal y transvesal (Fig. 1, Nos. 8 y 9) usando tuercas ciegas (Fig. 1, No. 13). • Ingles ............................................. ala Figure • Monte los mangos de la manivela (Fig. 1, No. 12) a los tomUlos de avance longitudinal y transvesal (Fig. 1, Nos. 8 y 9) usande tuereas ciegas (Fig. 1, No. 13). • Esta prensa de tomillo se env[a con una cape protectora, la qua es tlene que remover antes de la operaeibn. Remueve la cape protectora con aceite penetrante. 7 UN AI;IO COMPLETO DE GARANTIA PARA LAS PRENSAS DE TORNILLO TRANSVERS;ALES DE CRAFTSMAN DESCRIPCION Si dentro de un aSo a partir de la fecha de compra, esta prensa de tomiJlo de Craftsman falla debido a un defecto en el material o Las prensas de tornillo transversales Sears avanzan en dos ejes separados -- longitudinal y transversal, pare permitir una colc- en la mano de obra, Sears la reparar-_ gratis. caci6n precise de la pieza de trabajo. El cuerpo, el caballete, la base y ]as rnordazas estgn hechas de hierro fundido de alta resistencia. El tomillo de entrade de la prensa de tomillo, asf corno los tornillos de avance longitudinal y transversal, son de acero al carbono esrnerilados a predlsi6n. La garant[a de servicio se encuentra disponible simplementa devolviendo la prensa de tornillo al centro de servicio de Sears rrn-;,scercano en los Estadoe Unidsa. Esta garan'tfa le da derechoe legalee especfficos y puede que tange otros derachsa qua varfan de estado a estado. Sears, Roebuck and Co., Dept. 817WA, 60179 Refi6rase • Hoffrnan Estates, IL montaje • • Entiende y obedezsa todas las instrucciones de sagurided • suministradas con la prensa perforadora, la fresadora u otras rn_.quinas con las qua se usa la prensa de tornillo. • Abra las mordazas de la prensa de tornillo. Ponga la pieza de trabajo entre 6stas en la posicibn deseada. Rote el tomillo de • Asag!3resa qua la pieza de trabajo quede sujeta en forrna segure entre las rnordaz.as antes de ernpezar con la operasi6n de maqulnado. No la apdete dernasiado -- la prensa de tornillo puede desarroller una gran fuerza de eujeci6n. Use eotarnente la fuer-z.a que se necesita. • No golpee o ma.rtille la plaza de trabajo. Esta prensa de tomillo ha eido diseRada pare eujetar le piesa de trabajo en una posici6n deseada pare las operaciones de rnaquinado solamente. ubicadas en la base (Fig. 1, No. 1). Mueva el saballete (Fig. 1, No. 3) rotando e! mango de la manivela longitudinal (Fig. 1, No. 12). Aprieta el tornillo de fijaci6n central (Fig. 1, No. 6) pare asegurar ]a posioi6n. • Mueva el cuerpo (Fig. 1, No. 16) ala poeici6n deseada, rotando el mango de la rnanivela de alimentadlSn transversal (Fig. 1, No. 12). Aprieta el tomillo de fijaci6n central (Fig. 1, No. 6) para asegurar ia posioi6n. • Apeme o sujete [a prensa de tomillo en la euperticie de traba)o en por to rnenoe dos lugaree de montaje usando lee pestaRae de montaje que vienen con la base. • ala Figure 1. Monte la pransa de tomillo en la superfioie de trabajo en le ubicaci6n deseada asegurando por Io rnenos dos pesters de entrada de la mordaza rnovible (Fig. 1, No. 14) pare esegurar la piesa de trabajo entre las mordazas. AsegQrese qua la plaza de trabajo est_ segura en la prensa de tornillo antes de empezar la operacidn de maquinedo. 6 ESPECIFICACIONES Recorrido longitudinal (de izquierda a derecha) .................................... .................................... ................. 12,7 cm (240870) 20,3 cm (240890) 20,3 cm (240910) (de adelante hacia atr#,s) ................. .................................... .................................... 12,7 cm (240870) 20,3 cm (240890) 20,3 cm (240910) Ancho de la rnordaza .................................... 7,6 crn (240870) 15,2 cm (240890) Reoorrido transversal .................... .................................... 20,3 cm (240910) Abertura m_xima de la mordaza ........... .................................... .................................... 7,6 cm (240870) 15,2 crn (240890) 15,2 cm (240910) Valor de una divisi6n .................... ................................... ................................... 0,1 mm (240870) 0,1 rnm (240890) 0,1 rnm (240910) Recorddo transversal ................................... ................................... 3,0 mm (240870) 4,0 mm (240890) 4,0 mm (240910) par revoluci6n ........ Recorddo Iongitundinal ................................... ................................... par revoluciSn ....... 3.0 mrn (240870) 4,0 mm (240890) 4,0 mm (240910) Las particulas de metal o de madera pueden da,fiar las superficies aquinadas, difioultando o hacienda la operaci6n imprecisa. • M_tenga las superficies rnaquinadas y todas las partes movihies limpias y sin mugre, astJllas y materias exl.raftas. • Ma_tenga las superficies maquinadas da )ubricados y los tornillos de entra- con aceite de m&quina de media viscosidad. AJUSTE DE LA CHAVErA Refi_rase a la Figura 1. Ajusta las chavetas (Fig. 1, No. 4) apretandolos tomillosde fijaci6n (Fig. 1, Nas. 6 y 23) en cada extremo de las chavetas. Ajuste los tornillos hasta que se sienta una peque_,aresistancia cuando se rotan los mangos de Lamanivela (Fig. 1, No. 12). Asegure los tomilios apretando [as tuercas (Fig. 1, No.5). In U.S.A. or Canada for in-home major brand repair service: Call 24 hours a day, 7 days a week 1-800-4-MY-HOME °_(1-800-469-4663) Para pedir servicio de reparaci6n a domicilio - 1-800-676-5811 Au Canada pour tout le service - 1-877-LE-FOYER _ (1-877-533-6937) For the repair or replacement parts you need: Call 6 a.m. - 11 p.m. CST, 7 days a week PartsDirect = 1-800-366-PART (1-800-366-7278) www.sears.com/partsdirect Para ordenar piezas con entrega a domicilio - 1-800-659-7084 For the location of a Sears Service Center in your area: Call 24 hours a day, 7 days a week 1-800-488-1222 To purchase or inquire about a Sears Maintenance Agreement: Call 7 a.m. - 5 p.m. CST, Monday - Saturday 1-800-827-6655 HomeCentral
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 8 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Wed Aug 15 01:21:48 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools