Craftsman 48624535 User Manual SLEEVE HITCH Manuals And Guides L0803264
CRAFTSMAN Accessories, Tractor Manual L0803264 CRAFTSMAN Accessories, Tractor Owner's Manual, CRAFTSMAN Accessories, Tractor installation guides
User Manual: Craftsman 48624535 48624535 CRAFTSMAN SLEEVE HITCH - Manuals and Guides View the owners manual for your CRAFTSMAN SLEEVE HITCH #48624535. Home:Lawn & Garden Parts:Craftsman Parts:Craftsman SLEEVE HITCH Manual
Open the PDF directly: View PDF 
.
Page Count: 8
Owner's Manual
®
LECTRIC ASSIST KiT
(FOR 486.24535 SLEEVE HITCH)
DO NOT RETURN TO STORE
For Missing Parts or Assembly
Questions Call 1-866-576-8388
Model No. 486.245451
CAUTION:
Before using this product, read
this manual and follow all Safety
Rules and Operating Instructions.
®
O
®
®
O
Safety
Assembly
Operation
Maintenance
Parts
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www. sears, co m/c raftsman
PRINTED IN U.S.A. FORM NO. 40857 (11/09/07)
SAFETY RULES .......................................................... 2
FULL SIZE HARDWARE CHART ................................ 3
CARTON CONTENTS ................................................. 4
ASSE MBLY .................................................................. 4
OPERATION ................................................................ 6
MAINTENANCE .......................................................... 6
REPAIR PARTS ILLUSTRATION ................................ 7
REPAIR PARTS LIST ................................................... 7
PARTS ORDERING/SERVICE ..................... Back Page
ONE YEAR FULL WARRANTY
When operated and maintained according to the instructions supplied with it, if this Electric Assist Kit fails due to a defect in
material or workmanship within one year from the date of purchase, call 1-800-4-MY-HOME® to arrange for free repair (or
replacement if repair proves impossible).
If this product is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., D817WA, Hoffman Estates, IL 60179
Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment.
Exercise caution at all times, when using power equipment.
Read this owners manual and your vehicle and
sleeve hitch owners manuals before using this
electric assist kit with the sleeve hitch.
Do not allow children to operate vehicle or sleeve
hitch.
Do not allow adults to operate the vehicle or sleeve
hitch without proper instructions.
Keep all nuts and bolts tight and be sure the
equipment is in safe operating condition.
Look for this symbol to point out important safety precautions. It means--Attention!! Become
alert!! Your safety is involved.
The model number and serial numbers will be found on a
decal attached to the frame.
You should record both the serial number and the date of
purchase and keep in a safe place for future reference.
MODEL NUMBER:
SERIAL NUMBER:
DATE OF PURCHASE:
486.245451
A
......... i
......... i
......... i
.......... i
.......... i
........ i
........... q
......... i
.......... ]
!
/
\\
)
F
KEY QTY. DESCRIPTION
1
4
2
4
A
B
C
D
Hex Bolt, 1/2" x 2-3/4"
Hex Bolt, 3/8" x 1"
Hex Lock Nut, 1/2"
Hex Nylock Nut, 3/8"
KEY QTY. DESCRIPTION
5
1
1
E
F
G
Flat Washer, 1/2"
Clevis Pin, 1/2" x 2"
Hair Cotter Pin, 3/32"
CARTON CONTENTS
I,
2.
3.
Mount Bracket Assembly
Switch with Wiring
Linear Actuator
TOOLS REQUIRED FOR ASSEMBLY
(2) 9/16" Wrenches or Adjustable Wrenches
(2) 3/4" Wrenches or Adjustable Wrenches
PREPARING THE SLEEVE HITCH
Remove the bolt and nut that attach the lift link to the
sleeve hitch frame. Remove the handle and the pivot
brackets from the sleeve hitch frame. See figure 1.
ATTACHING THE ELECTRIC ASSIST KIT
Attach the mount bracket assembly to the sleeve
hitch frame using four 3/8" x 1" hex bolts and 3/8"
nylock hex nuts. See figure 2.
FIGURE 2
486.24535 SLEEVE HITCH
REMOVE PIVOT
BRACKETS
LINK
REMOVE
BOLT AND NUT
FIGURE I
Insertthe1/2"x 2-3/4"hexboltintothelowershaftof
theactuatorandthenscrewa 1/2"hexlocknutasfar
aspossibleontothebolt.Seefigure3.
Placeupto five1/2"flatwashersbetweentheanchor
bracketsontheliftassemblyandinserttheendof
the1/2"x 2-3/4"hexboltthroughtheanchorbrackets
andthewashers.Screwa second1/2"hexlocknut
ontotheboltsothatitisflushwiththeendofthebolt.
Screwthefirstnutbackagainsttheanchorbrackets
andtightenbothnutssecurely.Seefigure3.
112" FLAT
WASHERS
1/2" X 2-3/4"
HEX BOLT
\
1/2" HEX
LOCK NUT
HEX
LOCK NUT
FIGURE 3
Place the other end of the actuator between the
anchor brackets on the mount bracket assembly.
Insert the 1/2" x 2" clevis pin through the anchor
brackets, securing it with the 3/32" hair cotter pin. See
figure 4.
1/2" X 2" CLEVIS PIN
3/32" HAIR COTTER PIN
FIGURE 4
iMPORTANT: Connect to a 12 volt power source only.
If you wish to permanently attach the switch to the
tractor dash:
a. Drill a 1/2" hole in the lower right hand corner of
the tractor's dash as shown in figure 5. A hole
larger than 1/2" may cause the nuts on the
switch to not hold properly.
b. Remove the hex nut from the actuator switch
and then screw the round nut to about the mid-
point on the threads.
c. Insert the switch into the hole you drilled in the
tractor's dash and secure it with the hex nut you
removed from the switch.
To connect the switch to the tractor battery, attach
the terminal on the red wire (with fuse) to the positive
post and the terminal on the black wire to the
negative post of the battery.
Route the flexible conduit to the rear of the tractor
avoiding hot engine parts, moving parts and pinch
points. Connect the plug on the conduit wires to the
plug on the actuator wires.
f
i
'\
DRILL 1/2" HOLE HERE
FIGURE 5
Keep clear of the linear acutator, the sleeve hitch and
the attached implement when raising and lowering.
The linear actuator is equipped with a safety clutch.
When the actuator reaches the end of it's stroke the
clutch will slip and make a loud clicking sound.
Clean off after each use.
Store in a dry location.
PARTS FOR MODEL 486.245451 ELECTRIC ASSIST KiT
lO
//// 5
4
/
/
/
0.1
j.J'_
3
/
/
/
/
2 1
/
/ /
/
REF PART NO
1 40571
2 64941
3 43343
4 HA23505
5 43001
6 HA21362
QTY REF PART NO
1 Linear Actuator 7 43262
1 Mount Bracket Assembly 8 1540-59
1 Hair Cotter Pin, 3/32" x 2-5/16" 9 43510
1 Clevis Pin, 1/2" x 2" 10 49309
4 Hex Bolt, 3/8-16 x 1" 40857
4 Nylock Nut, 3/8-16
QTY
2 Hex Lock Nut, 1/2-13
5 Flat Washer
1 Hex Bolt, 1/2-13 x 2-3/4"
1 Switch with Fuse
1 Owners Manual
Your Home
For repair - in your home - of all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner's manuals that you need to do-it-yourself.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.
1-800-4-MY-HOME ® (1-800-469-4663)
Call anytime, day or night (U.S.A. and Canada)
www.sears.com www.sears.ca
For expert home solutions advice: www.managemyhome.com
Our Home
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call or go on-line for the location of your nearest
Sears Parts & Repair Service Center
1-800-488-1222 (U.S.A.) 1-800-469-4663 (Canada)
Call anytime, day or night
www.sears.com www.sears.ca
To purchase a protection agreement on a product serviced by Sears:
1-800-827-6655 (U.S.A.) 1-800-361-6665 (Canada)
Para pedir servicio de reparaci6n Au Canada pour service en fran(_ais:
a domicilio, y para ordenar piezas: 1-800-LE-FOYER M°
1-888-SU-HOGAR ® (1-800-533-6937)
(1-888-784-6427) www.sears.ca
TM
® Registered Trademark /' Trademark /sM Service Mark of Sears Brands, LLC
® Marca Registrada /TMMarca de F&brica /sM Marca de Servicio de Sears Brands, LLC
MC _,ID
Marque de commerce / ' Marque d6pos6e de Sears Brands, LLC © Sears Brands, LLC
