Craftsman 48624594 User Manual SPREADER Manuals And Guides L0812625

CRAFTSMAN Spreader Manual L0812625 CRAFTSMAN Spreader Owner's Manual, CRAFTSMAN Spreader installation guides

User Manual: Craftsman 48624594 48624594 CRAFTSMAN SPREADER - Manuals and Guides View the owners manual for your CRAFTSMAN SPREADER #48624594. Home:Farm Equipment Parts:Craftsman Parts:Craftsman SPREADER Manual

Open the PDF directly: View PDF .
Page Count: 12

Download
Open PDF In Browser	View PDF

Operator's IVlanuai

CRRFTSMRH
°
175LB PROFESSIONAL

SPREADER
DO NOT RETURN

Model No. 71-24594

CAUTION:
Before using this product, read
this manual and follow all Safety
Rules and Operating Instructions.

TO STORE

For Missing Parts or Assembly
Questions Call 1-866-576-8388

,,
,,
,,
,,
,,

Safety
Assembly
Operation
Maintenance
Parts

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www.sears.com/craftsman

PRINTED IN USA

FORM NO. 42012 (12/08/08)

WARRANTY
....................................................................
2
MAINTENANCE
..............................................................
9
SAFETY
...........................................................................
2
SERVICE
ANDADJUSTMENTS
.....................................
9
CARTON
CONTENTS
.....................................................
3
STORAGE
.......................................................................
9
FULLSIZEHARDWARE
CHART
....................................
3
REPAIRPARTS
ILLUSTRATION
...................................
10
ASSEMBLY
......................................................................
5
REPAIRPARTS
LIST.....................................................
11
ACCESSORIES
ANDATTACHMENTS
...........................
8
PARTS
ORDERING/SERVICE
......................
BACKPAGE

CRAFTSMAN

PROFESSIONAL

FULL WARRANTY

When operated and maintained according to all supplied instructions, if this Craftsman Professional product fails due to a
defect in material or workmanship within two years from the date or purchase, return it to any Sears store or other Craftsman
Professional outlet in the United States for free replacement.
This warranty applies for only 90 days from the date of purchase if this product is ever used for commercial or rental
purposes.
This warranty does not include items considered to expendable parts that can wear out from normal use within the warranty
period.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., D817WA, Hoffman Estates, IL 60179
DO NOT RETURN TO STORE for Missing Parts or Assembly Questions
Call 1-866-576=8388 Attachment Hotline
The model number and serial numbers will be found on a
decal attached to the 1751b Professional Spreader.

MODEL NUMBER:

71-24594

SERIAL NUMBER:
You should record both the serial number and the date of
purchase and keep in a safe place for future reference.

DATE OF PURCHASE:

Any power equipment can cause injury if operated improperly or if the user does not understand
the equipment. Exercise caution at all times when operating equipment.
•

Read the towing vehicle owners manual and towing
vehicle safety rules. Know how to operate your tractor
before using the broadcast spreader attachment.
Read the chemical label instructions and cautions for
handling and applying the chemicals purchased for
spreading.
Wear eye and hand protection when handling and
when applying lawn or garden chemicals.
Never operate tractor and spreader attachment without
wearing substantial footwear, and do not allow anyone
to ride or sit on spreader attachment frame.
Never allow children to operate the tractor or
spreader attachment, and do not allow adults to
operate without proper instructions.

how to operate

Always begin with the transmission in first (low) gear
and with the engine at low speed, and gradually
increase speed as conditions permit.
When towing broadcast spreader do not drive too
close to a creek or ditch and be alert for holes and
other hazards which could cause you to loose control
of the broadcast spreader and tractor.
Before operating vehicle on any grade (hill) refer
to the safety rules in the vehicle owner's manual
concerning safe operation on slopes. Stay off steep
slopes!
Follow maintenance and lubrication instructions as
outlined in this manual.

LOOK FOR THiS SYMBOL TO POINT OUT iMPORTANT SAFETY PRECAUTIONS.
MEANS m ATTENTION! BECOME ALERT! YOUR SAFETY IS iNVOLVED.
2

Call 1-866-576-8388

]
iT |

for missing parts or assembly help
DO NOT RETURN TO STORE

3
6
4

5
J

REF

DESCRIPTION

REF

DESCRIPTION

1
2

Hopper Cover
Hitch Tube

4
5

i Hopper Assembly
Screen

Wheels (2)

i Flow Control Mounting Tube

q
E

J
/
J
I
J
I
J
J
f
J
J
J
J
/
J

KEY
A
B
C
D
E

NOT SHOWN FULL SIZE

QTY
2
2
2
2
2

DESCRIPTION
Hex Bolt, 5/16"x 1-3/4"
Hex Bolt, 1/4" x 1-3/4"
Nylock Hex Nut, 1/4"
Nylock Hex Nut, 5/16"
Cotter Pin, 1/8 x 1-1/2"

Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE

KEY
F
G
H

QTY
1
4
1

I
J

2
1

DESCRIPTION
Hair Cotter Pin, 1/8"
Flat Washers 3/4"
Hitch Pin
Spacers
Drive Pin
3

TOOLS

REQUIRED

FOR ASSEMBLY

STEP 2: (SEE FIGURE 2)
4.

(!)
(2)
(2)
(2)

tube using a 1/4" x 1-3/4" (B) hex bolt and a 1/4"
nylock hex nut (C). DO NOTTIGHTEN YET. Do not
assemble the inner hitch braces at this time.

Pliers
7/16" Wrenches
1/2" Wrenches
9/16" Wrenches

REMOVAL

Assemble the two OUTER hitch braces to the hitch

HITCH

OF PARTS FROM CARTON

Remove all parts and hardware packages from the
carton. Lay out all parts and hardware and identify using
the illustrations on page 3.

STEP 1: (SEE FIGURE 1)
1.
2.
3.

Turn the spreader upside down.
Remove lock nut from middle bolt in crossover tube
and shaft support plate. Leave the bolt in place.
Assemble hitch tube onto middle bolt and secure
it with the same lock nut you removed. DO NOT
TIGHTEN YET.

iMPORTANT: The hitch tube must attach to the side of
the crossover tube opposite the shaft support plate.

MIDDLE BOLT

SHAFT
SUPPORT
PLATE
CROSSOVER
TUBE

(B) 1/4" x 1=3/4"
HEX BOLT

HITCH BRACE
OUTER

FIGURE 2

STEP 3: (SEE FIGURE 3)
5.

HITCH
TUBE

Assemble a spacer (I), a 3/4" fiat washer (G), a wheel
(air valve facing out) and another 3/4" fiat washer (G)
onto the end of the axle that has only the small hole.
install a 1/8" x 1-1/2" cotter pin (E) into the hole in the
axle.

SMALL HOLE

LOCK NUT

AIR VALVE

(E) 1/8" x 1-1/2"
COTTER PiN
FIGURE 1
(I) SPACER

(G) 3/4" FLAT
WASHER
FIGURE

Call 1-866-576-8388

for missing parts or assembly help
DO NOT RETURN TO STORE

STEP 4: (SEE FIGURE 4)

STEP 6: (SEE FIGURE 6)

10. Assemble a spacer (I), a 3/4" fiat washer (G), a wheel
(air valve facing out) and another 3/4" fiat washer (G)
onto the end of the axle that has both the large and
small holes.

7.
8.

Turn the spreader upright on its wheels.
Assemble the flow control mounting tube to the hitch
tube using two 5/16"x 1-3/4" he× bolts (A) and 5/16"
nylock hex nuts (D). DO NOTTIGHTEN YET.

11. install a 3/8" × 1-1/2" cotter pin (E) into the small hole
in the end of the axle.
12. Open the bail on the drive pin (J) and install it through
the wheel and the large hole in the axle. Close the
bail to lock the pin in place.
FLOW CONTROL
MOUNTING TUBE

(J) DRIVE PiN
x

(E) 1/8"× 1-1/2"
COTTER PiN

(A) 5/16" x 1-3/4"
HEX BOLT

(I) SPACER
(G) 3/4" FLAT
WASHER

FIGURE 6

STEP 7: (SEE FIGURE 7)

FIGURE 4

13. Assemble the two INNER hitch braces to flow control
mounting tube using a 1/4" × 1-3/4" he× bolt (B) and a
1/4" nylock he× nut (C). DO NOT TIGHTEN YET.
14. TIGHTEN all nuts and bolts assembled up to this
point. Do not collapse the tubes when tightening.

STEP 5: (SEE FIGURE 5)
9.

Hook the double bent end of the flow control rod
through the hole in the slide gate bracket located
near the bottom of the hopper.

HOPPER

SLIDE GATE
BRACKET

)

HITCH BRACE
INNER
FLOW CONTROL
IVIOUNTING TUBE

FLOW CONTROL
ROD
\
HITCH BRACE
iNNER

FIGURE 5

FIGURE 7
Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE

STEP 8: (SEE FIGURE 8)

STEP 9: (SEE FIGURE 9)

*
*
*
*

Push on flow control arm until it locks in "OFF"
position.
Slide flow control mounting bracket along tube until
closure plate in bottom of hopper just closes.
Snug the 5/16" nylock hex nuts just enough to
hold flow control mounting bracket in place.
Set adjustable stop at "5". Pull flow control arm
against stop. Verify that closure plate has opened
about half way.
if closure plate does not open half way, adjust position
of flow control mounting bracket until closure plate will
open about half way at "5" and will still close when
arm is locked in "OFF" position. Tighten the 5/16"
nylock hex nuts.

Place screen down into hopper, sliding edge of
screen under one of the clips. Slightly bow the screen
to slide opposite side of the screen under other clip.

CLIPS

FLOW
CONTROL
ARM

FIGURE 9

STEP 10: (SEE FIGURE 10)
*

ADJ USTABLE
STOP
(SETTING "5")

For most vehicles, you can keep the assembled hitch
extension bracket in its default position shown in
figure 10. Attach the spreader hitch to your vehicle
hitch. Check for interference with the spreader directly
behind and out to both sides of the vehicle. Lift the
spreader at each position to make sure there is no
interference with the spreader's flow control, if there
is interference with the rear of the vehicle, assemble
the hitch extension bracket as shown at the bottom
of figure 10. Tighten bolts and nuts when finished.

FIGURE 8

DEFAULT POSITION

EXTENDED
(IF INTERFERENCE)
FIGURE 10
6

Call 1-868-578-8388

for missing parts or assembly help
DO NOT RETURN TO STORE

HOW TO USE YOUR SPREADER
SETTING THE FLOW CONTROL
(Refer to figure 8 on page 6.)
•

Loosen the nylon wing nut, set the adjustable stop to
the desired flow rate setting and retighten the wing
nut. The higher the setting number, the wider the
opening in the bottom of the hopper.
Refer to the application chart on this page and to the
instructions on the fertilizer bag to select the proper
flow rate setting.
Pull the flow control arm against the adjustable stop
for the on position and toward the hopper for the off
position.

To insure uniform coverage, make each pass so that
the broadcast pattern slightly overlaps the pattern
from the previous pass as shown in figure 11. The
approximate broadcast widths for different materials
are shown in the application chart on this page.
When broadcasting weed control fertilizers, make
sure the broadcast pattern does not hit evergreen
trees, flowers or shrubs.
Heavy moisture conditions may require a cover over
the hopper to keep contents dry. The vinyl cover acts
as a wind and moisture shield, but should not be
used as a rain cover.

THE FREE WHEELING FEATURE
(Refer to figure 4 on page 5.)
The spreader is equipped with a removable pin in the
left (drive) wheel. Remove the pin to disengage the drive
wheel so that the axle, gears and spreader plate do not
rotate. With the drive wheel disengaged, the spreader
may be towed at speeds up to 20 mph. If the drive wheel
is engaged do not exceed 6 mph.

t
OVERLAP

/
I
t
|
I
\

USING YOUR SPREADER

We do not recommend the use of any powdered lawn
chemicals, due to difficulty in obtaining a satisfactory or
consistent broadcast pattern.
Determine approximate square footage of area to be
covered and estimate amount of material required.
Before filling the hopper make sure the flow control
arm is in the off position and the closure plate is shut.
Break up any lumpy fertilizer as you fill the hopper.
Set the adjustable stop with the flow control arm still
in the off position. Refer to the application chart on
this page and to the instructions on the fertilizer bag
to select the proper flow rate setting.
The application chart is calculated for light to heavy
application at a vehicle speed of 3 mph, or 100
ft. in 23 seconds. A variation in speed will require
an adjustment of the flow rate to maintain the
same coverage. The faster you drive, the wider the
broadcast width.
Make sure the drive pin is installed in the axle before
starting the spreader.
Always start the tractor in motion before opening
closure plate.
Always shut the closure plate before turning or
stopping the tractor.
If fertilizer is accidentally deposited too heavily in a
small area, soak the area thoroughly with a garden
hose or sprinkler to prevent burning of the lawn.
Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE

FIGURE 11

IMPORTANT: Application rates shown in the chart are
affected by humidity and by the moisture content of
the material (granular and pellet). Some minor setting
adjustments may be necessary to compensate for this
condition.

APPLICATION CHART
TYPE MATERIAL
FLOW
SETTING
FERTILIZER
Powder
3-5
Granular
3-5
Pelleted
3-5
Organic
GRASS SEED
Fine
Coarse
ICE MELTER

6-8
3-4
4-5
6-8

SPREAD
WIDTH
1 _ 41

8'- 10'
10'- 12'
6'-8'
1 _

7 I

8'-9'
10'- 12'

OPERATING SPEED - 3 MPH. (100 ft. in 23 seconds)

CHECK FOR LOOSE FASTENERS
•

Before each use make a thorough visual check of
the spreader for any bolts and nuts which may have
loosened. Retighten any loose bolts and nuts.

CHECK FOR WORN OF DAMAGED PARTS
Check for worn or damaged parts before each use.
Repair or replace parts if necessary.

LUBRICATE (See figure 12)
Lightly apply automotive grease as needed to the
sprocket and gear.
Oil the nylon bushings on the vertical sprocket shaft
and on the axle at least once a year, or more often as
needed.
Oil right hand (idler) wheel bearing at least once a
year or more often as needed.

CHECK TIRE INFLATION
Check if tires are adequately inflated before each
use. Do not inflate beyond maximum recommended
pressure.

. OIL

CAUTION: DO NOT inflate tires beyond the
maximum recommended pressure printed on
side of tire.
CLEANING
Rinse inside of hopper and exterior of spreader and
dry off before storing.

OIL
GREASE
FIGURE 12

REPLACING SLOTTED GEAR
SLOTTED

If the axle, slotted gear and sprocket assembly is
disassembled, mark down the positions of the parts
as they are removed. The drive wheel and sprocket
positions in relation to the slotted gear determine
which direction the spreader plate will spin. Be sure
to reassemble them in their original positions. (Refer
to figure 4 on page 5.) Use shim washers (Ref. no.
21 on pages 10 and 11) as needed for minimum
backlash. Add grease to gear and sprocket.
LOCKED UP SPREADER
Turn the spreader over so that the wheels are off the
ground.
Loosen all three nuts on the shaft support plate just
enough so that the bolts can be turned easily with a
wrench but cannot be turned by hand.
Spin the drive wheel and note how freely it spins and
how much noise the slotted gear makes.
To free up the wheel and gear, tap gently on the front
or rear edge of the shaft support plate to move it
slightly forward or backward. You can also tap at the
corners of the plate to angle it slightly.
Spin the drive wheel after each adjustment to see if it
spins more freely and if the gear noise is reduced.

GEAR

SHAFT SUPPORT PLATE

FIGURE 13

Continue making slight adjustments until you find the
position where the drive wheel spins most freely and
the gear makes the least noise.
Secure the shaft support plate in this position by
retightening all three nuts that you loosened.

Call 1-866-576-8388

for missing parts or assembly help
DO NOT RETURN TO STORE

•

Rinse inside of hopper and exterior of spreader and
dry off before storing.

Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE

•

Store in a clean, dry area.

47_

44
J

42
65

54
\
\

37
54

37
35

35
53

....................

30 .......... _
40 ............
39

37
9
9
40

49
15
5

.......

36 F

29 _l

7
13
24

14
\

23
\

@
i

20 21 22

37
16

35 /

50
10

56
37
Call 1-866-576-8388

for missing parts or assembly help
DO NOT RETURN TO STORE

REF.

PART NO. QTY.

DESCRIPTION

REF. PART NO. QTY.

1
2

44480
43882

1
6

Hopper
Rivet, Stainless

34
35

48586
23525

1
4

3
4
5
6

65129
44462
23753
23758

1
1
1
1

Ass'y, Guide Closure
Tube, Frame
Slide Gate Angle Bracket
Slide Gate Bracket

36
37
38
39

23762
1509-69
47441
1543-69

1
8
1
12

7
8

HA21362
24857

6
1

Nut, Nylock Hex 3/8-16 Thd.*
Flow Control Link

40
41

43088
24858

15
1

9
10
11
12

47189
43808
43084
44180

18
1
2
2

Nut, Nylock Hex 1/4-20 Thd.*
Tube, Crossover
Bolt, Hex 5/16-18 x 1-3/4" Lg.
Bolt, Hex 5/16-18 x 2"

42
43
44
45

24915
62474
24917
44101

1
1
1
1

13
14
15

47810
48864
48511

4
1
2

Nut, Nylock Hex 5/16-18 Thd.*
Tube, Hitch
Wheel

46
47
48

23533
43848
43407

1
1
2

16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32

25080
23014
24914
43851
43871
1540-32
1540-162
47615
47683
25305
04367
43850
44468
44285
25672
48934
43070

1
1
1
2
1
5
1
2
2
1
1
1
1
2
2
1
5

Bracket, Hitch Extension
Bracket, Hitch
Shaft, Axle
Pin, Spring 3/16" Dia. x 1-1/4" Lg.
Bushing, Axle Shaft
Washer, Flat .78 I.D.
Washer, Flat 1/2"
Bearing, Flange
Tube, Spacer
Shaft, Sprocket
Spreader Plate
Pin, Spring !/8" Dia. x 5/8".
Sprocket, 6 Tooth
Bushing, Delrin
Clip
Hairpin Agitator
Washer, Flat 3/8" *

49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65

43054

Bolt, Hex 3/8-16 x 2" Lg.*

43093
43009
47141
HA180132
46699
R19111116
47623
43343
44566
43661
46055
44950
23697
48515
48514
44481
40825
42012

2
4
1
1
6
6
1
1
1
5
1
1
1
1
1
1
1
1

DESCRIPTION
i Rod, Flow Control
i Brace, Hitch
i Shaft Support Plate
i Bolt, Hex 1/4-20 x 1-3/4"
i Screen
i Washer, Nylon
i Washer, Flat 1/4" Std.
i Stop, Adjustable
i Bracket, Flow Control Mount
i Gear Assembly
Flow Control Arm
i Cotter Pin 3/32" x 3/4" Lg.*
i Plate, Closure
i Grip, Flow Control Arm
i Bolt, Hex 3/8-16 x 3/4" Lg. *
i Pin, Cotter 1/8" x 1-1/2"
i Washer, Flat 3/4"
i Wing Nut, Nylon
i Bolt, Hex 3/8-16 x 2-1/4" Lg. *
i Bolt, Hex 1/4-20 x 2-1/2"
i Washer, 5/16 SAE
Hitch Pin
Hair Cotter Pin, 1/8"
i Spring, Torsion
Bolt, Hex 1/4-20 x 1" Lg.*
Pin, Spring 1/8" Dia. x 1" Lg.
Bolt, Carriage 1/4-20 x 3/4"
Hopper Strap
Drive Pin W/Bail, 1/4" x 2"
Flow Control Mounting Tube
i Vinyl Cap
i Vinyl Cover
Owner's Manual

* Purchase standard hardware locally.

Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE

Your Home
For expert troubleshooting

and home solutions advice:

www.managemyhome.com

For repair - in your home - of all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner's manuals that you need to do-it-yourself.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.

1-800-4-MY-HOME ®
Call anytime,

(1-800-469-4663)

day or night (U.S.A. and Canada)

www.sears.com

www.sears.ca

Our Home
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call anytime for the location of your nearest
Sears Parts & Repair Service Center

1-800-488-1222

(U.S.A.)

1-800-469-4663

www.sears.com

To purchase a protection

1-800-827-6655

agreement

(U.S.A.)

on a product serviced by Sears:

1-800-361-6665

Para pedir servicio de reparaci6n
a domicilio, y para ordenar piezas:

1-888-SU-HOGAR

Au Canada

de commerce

/ MD Marque

depos6e

de Sears

(Canada)

pour service en fran(_ais:

1-800-LE-FOYER

M°

(1-800-533-6937)

® Registered Trademark / TM Trademark / SM Service Mark of Sears Brands, LLC
® Marca Registrada / TM Marca de F&brica / SM Marca de Servicio de Sears Brands,
MC Marque

(Canada)

www.sears.ca

Brands,

LLC

LLC
© Sears

Brands,

LLC

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 12
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 4, 0, 0, 13
Create Date                     : Sat Jan 03 04:16:24 2009
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

Craftsman 48624594 User Manual SPREADER Manuals And Guides L0812625

CRAFTSMAN Spreader Manual L0812625 CRAFTSMAN Spreader Owner's Manual, CRAFTSMAN Spreader installation guides

Navigation menu

Versions of this User Manual:

Views

Navigation