Craftsman 536772400 User Manual EDGER Manuals And Guides L0050129

CRAFTSMAN Edger Manual L0050129 CRAFTSMAN Edger Owner's Manual, CRAFTSMAN Edger installation guides

User Manual: Craftsman 536772400 536772400 CRAFTSMAN EDGER - Manuals and Guides View the owners manual for your CRAFTSMAN EDGER #536772400. Home:Lawn & Garden Parts:Craftsman Parts:Craftsman EDGER Manual

Open the PDF directly: View PDF PDF.
Page Count: 22

3.5 Horsepower
9 Inch
EDGER
MODEL NO.
536.772400
Caution:
Read and follow all Safety
and Operating Instructions before
first use of this product.
SEARS, ROEBUCK AND CO., Hoffman Estates, IL 60179 U.S.A.
F-001106M
a
g
a
g
a
g
TABLE OF CONTENTS
WARRANTY STATEMENT
SAFETY RULES
INTERNATIONAL SYMBOLS
ASSEMBLY
OPERATION
MAINTENANCE
2 SERVICE AND ADJUSTMENT 19
S TROUBLE SHOOTING CHART 22
5 EDGER REPAIR PARTS 23
6 ENGINE REPAIR PARTS 31
10 SPANISH (ESPAI_OL) 37
16 PARTS AND SERVICE BACK COVER
WARRANTY STATEMENT
LIMITED TWO-YEAR WARRANTY ON CRAFTSMAN EDGER
Fortwo yearsfromthe dateof purchase,when this CraftsmanEdgeris maintained,lubri-
cated,andtunedupaccordingtotheoperalJngandmaintenanceinstructionsintheowner's
manual,Sears will repair,free of charge,anydefect inmaterialor workmanship.
Ifthis CraftsmanEdgeris usedforcommercialor rentalpurposes,this warrantyappliesfor
Only90 daysfromthe data of purchase.
This warrantydoes notcover the following:
Expendableitemswhichbecomewom duringnormaluse,suchas sparkplugs,etc.
Repairsnecessarybecauseof aperator abuseor nsgliganoe,includingbentcrankshafts
andthe failureto maintainthe equipmentaccordingto the instructionscontainedinthe
owner'smanual.
WARRANTY SERVICEIS AVAILABLEBY RETURNING THE CRAFTSMAN EDGER TO
THE NEAREST SEARS SERVICE CENTER/DEPARTMENT IN THE UNITED STATES.
THIS WARRANTY APPLIES ONLYWHILE THIS PRODUCT IS IN USE IN THE UNITED
STATES.
Thiswarrantygivesyouspecificlegalrights,andyoumayalsohaveotherrightswhichvary
fromstate to state.
Sears, Roebuck and Co., D817WA, Hoffman Estates, IL 60179
Engine Exhaust, some of Its constituents, and certain vehicle
components contain or emit chemicals known to the State of
California to cause cancer and birth defects or other repro-
ductive harm,
Battery posts, terminals and related accessories contain
lead and lead compounds, chemicals known to the State of
California to cause cancer and birth defects or other repro-
ductlve harm. WASH HANDS AFTER HANDLING.
F-OO11coM 2
A
SAFETY RULES
Safe Operation Pmctlcee for Edger.
WARNING: Look for this symbol to point out Important safety precaul_ons,
It means: "Attention! Become AtarttYour Safety Is Invohmd,"
A ARNING: To prevent eccldan-
tat atmllng whim setting-up,
transporting, adjusting or mak-
Ing repairs, atwsys dteconnect spmk
plug wire end put wire whom it cannot
contact the spark plug.
Before Use
• Rendthe owner'sman_ c_e_|y. Be
thoroughly familiarwiththe controlsand
theproper use _ the Edger.Knowhowto
stop the Edgerand disengagethe controls
gui_.
Do notoperatethe Edgerwithoutweadng
adequateoutergarments.Wear footwear
_t willimprovefootingonslipperysur-
faces.
Keep thearea of operationdear of all per-
sons,particularlysmallchildrenand pets.
Thoroughlyinspectthearea wherethe
Edgaris to be used and removeall foreign
objects.
Fuel Safety
Handlefuelwithcare;itis highlyflam-
mable.
Use an approved container.
Checkfuelsupplybeforeeachuse, allow-
ingspacefor expansionas the heatof the
engineand/or suncan cause fuelto ex-
pand.
• FillfueltankoutdoorswithexVemecare.
Never fillfuel tank indoors.Replacefuel
tankcapsecurelyandwipeup spilledfuel
Never removethe fuel tank cap oraddfuel
to a runningorhotengine.
Never store fuel or Edger with fuel in the
tank inside a bu_k_n9where fumes moy
reach an open llama.
F-001106M
OperaUng Safety
Never ellow childrenoryoungteanagereto
operatethe Edger. Keepthem away while
it is operating.Neveratfowadultsto obef-
ate the Edgerwithoutproperinstru_on,
Do notoperatethis machineifyou aretak-
thg drugsorothermedicationwhichcan
cause drowsinessor affectyourabilityto
operatethismachine,
Do notusethis machineif youare mentally
orphysicallyunableto operatethisma-
chinesafely.
Alwayswear safety glassesoreye shields
dm_,goperatk3rtorwhileperforming an
adjustmentorrepairto protectyoureyes
fromforeign objectsthatmay be thrown
fromthe Edger,
Do notputhandsorteat nearor underro-
tatingparts.
Exerciseextremecaution whenoperating
on o_crossinggravelddves,walks,or
reads.Stay alertfor hiddenhazardsor
traffic.
ExemicacauUonto avoidslippingorfelling.
Neveroperatethe Edgerwithout proper
guards,plates,or othereafaty protective
devicesin place.
Never operate the Edgar at high transport
speeds on slippery surfaces. Look behind
and usa care when backing.
Neverallo',_bystanders_)sr the Edger.
Keep children and pets away while
operating.
Never operate the Edger without gond _si-
billly or light.
Do not run the engine indoors, The ex-
hanst fumes are dangerous, containing
CARBON MONOXIDE, an ODORLESS
and DEADLY GAS.
Takeall possibleprecautionswhen leaving
the Edgerunattended.Stopthe engine.
Do notovedoedff_eEdgercapacitybyat-
temptingto tilltoo deep attoo fasta rate,
SAFETY RULES
Safe Storage
Nways refertothe owner'smanualinstruc-
tionsfor importantdetailsifthe Edgeris to
be storedforan extendedperiod.
Neverstorethe Edgerwithfuel In the fuel
tank insidea buildingwhereIgnition
soumes are presentsuchas waterand
space heaters,clothesdryers,and the like.
Allowthe engineto coolbeforestoringin
anyenclosure.
• Keepthe Edgerin safeworkingcondition.
Checkallfastenemat frequentintervalsfor
propertightness.
Repair /Adjustments Safety
spectthe Edgerfor any damage,and re-
pair the damagebeforerestartingand
operatingit.
If Edger shouldstartto vibrateabnormally.
stop engineandcheck immediatelyfor the
cause. Vibrationis ganemllya warningof
trouble.
Stopthe enginewheneveryouleave the
operatingposition.Also,disconnectthe
sparkplugwire beforeuncloggingthe
bladeandwhen makinganyrepairs,ad-
jsstments,orinspections.
Whencleaning,repairing,or inspecUng,
shutoffthe engineand make certainall
movingparts have stopped.
Afterstrikinga foreignobject,stopthe en-
gine. Removethewire fromthe sparkplug.
and keepthe wireaway from the plugto
preventaccidentalstarting.Thoroughlyin-
Neverattemptto make any adjustments
while the engineis runningexceptwhen
specificallyrecommendedby the manufac-
turer.
F-001106M 4
SAFETY RULES
INTERNATIONAL SYMBOLS
IMPORTANT: Many of the following symbols are located on your unit or on literature sup-
plied with the product. Before you operate the unit, learn and understand the purpose for
each symbol.
ControlAndOperatingSymbols
Slow Fast Fuel OII
Primer Button
SafetyWarningSymbols
WARNING WARNING
Thrown Objects. Rotating Parts. Stop Engine. WARNING
Keep Bystanders Away. Disconnect Spark Wire Before
Making AdJeabnenta.
IMPORTANT
Read Owner's Manual
Before Operating
This Machine.
WARNING STOP
Wear Eye Protection
F-001106M 5
ASSEMBLY
ASSEMBLY
Parts Packed Separately In Carton
1 - Owner's Manual(notshown)
1 - ContainerOf Oil
1 - Hair Pin
1 - Hair Pin
1- Container of Oil
A WARNING: Always wear safety
glasses or eye ahlelds while aa-
eambllng the Edger.
Figure 1 showsthe Edger completelyas-
sembled.
Referencesto the rightor leftsideof the
Edgerare fromthe viewpointof the opam-
tor'spositionbehindthe unit.
REMOVE THE EDGER FROM THE
CARTON
1. Removethebottleofoilandpartsbag
fromthe carton,
2. Cut down all four comers of the carton.
3. Remove the packing material positioned
around the unit.
4. Roll the Edger out of the carton and
place on a hard level surface.
Figure 1
F-OO1106M 6
ASSEMBLY
HOW TO RAISE THE HANDLE
1. Loosenthe knobs and raisethe upper
handletothe uprightposltlon.See
Figure2. Allowthe control rodto swing
freely.
2. "nghtenthe knobs. Makesum the
knobs am to the outsideof the handles
as showninFigure2.
3. Insertthe endof the €ontrol rod from
leftto rightthrough the hole inthe quill
support arm. Attachwithheir pinfound
in partsbag.See Figure3.
4. Whenthe clutchleveris in NEUTRAL
position,the quill support arm mustbe
closeto the screw as shownin Figure4.
ControlRod
Upper
Handle
Rgure 2
vzwvzw
Control
Hair Pin Rod
Quill
SupportArm
Figure3
F-OO1106M 7
ASSEMBLY
HOW TO PREPARE THE ENGINE
Fill With OII
This Edger was shippedwith a 20 ounce
containerof SAE30 motoroil.Addthis oilto
the enginebeforeoperating.Tofill thecrank-
case,removethe oilfill cap/dipstickand add
the SAE30 motoroil. DO NOT OVERFILL,
NOTE: The engine may contain a small
amount of oil When adding o11,frequently
Insertthe oil fill celddlpetiek end check
the amount of oll In the engine. DO NOT
OVERFILl,
OII Recommendations
Only use high quality detergent oil rated with
API service classification SG. Select the oil's
SAE viscosity grade according to your ex-
pected operating temperature. Although mul-
ti-viscasity oils (5W30, 10W30, etc.) improve
starting in cold weather, these multi-viscosity
otis will result in increased oil coflsumption
when used above 32 degrees. Check the
engine oil level more frequently to avoid pos-
sible engine damage from running the en-
gine low on oil,
<-
<- 32+ I
Colder_._,-_ --Warmer
'l
How To Add The Engine OII
1. Putthe Edger on a levelsurface.
2. Removethe oilfillcap(Figure5).
3. Slowlyfillthe enginecrankcase.DO NOT
OVERFILL.
How To Fill With Gasoline
Makesurethatthe gasolinecontaineris
cleanandfree fromdust orotherforeignma-
terial.Never use gasolinethat couldbe stale
fromlongperiodsof storage.
1. Removethe fuelcap.
2. FIll the fuel tank with clean, fresh, un-
leaded grade automotive gasoline.
A ARNING: Always use e safety
fuel container. Do not smoke
when adding the fuel mixture to
the engine. When Inside an enclosure,
do not fill the fuel tank. Before you add
the fuel mixture, stop the engine. Let the
engine cool for several mlnutce.
NOTE: ENGINES WHICH ARE CERTIFIED
TO COMPLY WITH CAUFORNIA AND US
EPA EMISSION REGULATIONS FOR
ULGE ENGINES, ere certified to operate
on regular unleaded gasoline. Include the
following emieslon control system(s):
EM, TWC (if so equipped). Include any
user adjustable features - therefore no
other adjustments are needed.
Oil Fill
Cap
/
Fuel
Cap
Fuel Tank Figure 5
F-001106M 8
ASSEMBLY
CHECKUST
Forthe bestperforrnenoeand satisfaction
fromthis qualityproduct,please mvlaw the
followingchecklistbeforeyouoperatethe
Edger:.
P" All assemblyinstmctionshavebeen
completed.
p,
v"
Checkcarton.Make sureno loose
pads remainin the carton.
Allfastanershave been propedytight-
ened.
Asyou learnhowto usethe Edger,pay extra
attentionto the followingimportantitems:
_"P" Engineoil isat properlevel.
J_'J," Fueltank is filledwitha fresh,dean,
regularUnleadedgaso|ine.
_'_" Becomefamiliarandunderstandthe
functionof all conb'ols.Beforeyour
startthe engine,operateall conbols.
IMPORTANT: This unit is equipped with an internal combustion engine end must not be
used on or near any unimproved foreet--covered, brush-covered or grees-covered land
unleee the engine's exhaust system is equipped with aspark errester meeting
applicable local or state laws (If any). If aspark arreeter Is used, It must be maintained In
effective woridng order by the operator.
In the State of California the above la required by law (Section 4442 of the California
Public Resources Code). Other etstee may have similar laws. Federal laws apply on fed-
eral lands. A el}ark arrester/muffier is avellabla through your nearest Sears Service Can-
ter (see the REPAIR PARTS section In this manual).
F-OO1106M 9
OPERATION
KNOW YOUR EDGER
READ THE OWNER'S MANUAL AND ALL SAFETY RULES BEFORE YOU OPERATE the
Edger.To familiarize yourselfwiththe locationof the controls,comparethe illustrationswith
yourEdger.Save thie manual for future reference.
Tl_rodle
AdjustableRear Wheel
AdjustableFrontWheel
ClutchLever
ControlRod
BladeGuard
ENGINE
PrimerButton
VIEW OF BLADE AREA
Blade Figure6
Throttle Control - Controlsthe engine
speed.
Primer Button - Injectsfueldimly into
the carburetorfor fasterstarts.
Clutch Lever - Use to startand stopthe
bladeandcontrolthe depthof cut.
Adjustable Rear Wheal - Rightrear
wheelis adjustable to level the Edgerwhen
edgingalonga curb(curb-hopping).
Adjustable Front Wheal - Frontwheel
is adjustablefromside-to-side for balance.
The frontwheel can alsobe adjusteddown
for curb-hopping.
Recoil Starter Handle - The engine is
equippedwithan easy pullrecoilstarter.
Blade Guard - Use to preventstonesor
othermatadalfrombeingthrownat the oper-
ator,
Index Lever - Permitsadjustmentfrom
theedging(vertical)positionto the tdmming
(horizontal)position. Tochangepoaltion, pull
the indexleverand rotatethe quillassembly
to the desiredangleorposition,
EYE PROTECTION
Alwayswearsafetyglasses.If you weareye
glasses,puta WideVisionSafety Maskover
youreye glasses.
F-001106M lO
A ARNING: Debris thrown from
the Edger can result In foreign
objects being thrown Into the
eyes, which can cause severe eye dam-
age. Always wear eafety Blame or eye
shields when operating the Edger.
OPERATION
HOW TO STOP THE EDGER
1. Move theclutch lever backto the DIS-
ENGAGED position.Then, movethe
throttle control to the STOP position.
See Figure7.
A WARNING: Never leave the
EDGER unattendedwhile the
engine Is running. Always die-
engage the cutting blade and stop the
engine.
HOW TO USE
THE THRO'I'I'LE CONTROL
1. Dudng normal use, run the engine at full
speed.
2. Move the throttle control up to increase
engine speed, or down to decrease en-
gine speed (see Rgure 7).
HOW TO USE
THE PRIMER BUTTON
Whenstartinga coldengine,pushthe prim-
er button five times (see Figure8). Walt
approximatelytwosecondsbetweeneach
push.
IMPORTANT:When atartlng warm engine,
do not use the primer button.
HOW TO USE
THE CLUTCH LEVER
1. Starttheengine.
2. Toengagethe cuttingblade,movethe
clutch lever forward (see Figure9).
3. Select the edging depth you need. There
are five selections down to approximate-
ly 2-3/4 inches deep.
NOTE: For deep edging, first cut at shallow
depths. Then, cot at greater depths until
the desired depth is obtained.
ClutchLevsr_
F-001106M 11
OPERATION
HOW TO USE THE INDEX LEVER
1. Stopthe engineand disconnectthe
sparkplugwirefromthe sparkplug.
2. Loosen the front wheel knob shown in
Figure 10. Slide the front wheal all the
way to the right side.
3. Securely Ughten the front wheal knob.
NOTE: To prevent the blade from hit-
ting the wheel while trimming, make
sure the front wheal is set in the ex-
treme right position.
4. Disengagethe index lever (see
Figure 11).Movethe Index lever to the
notchmarked90°.
5. Reconnectthe sparkplugwireto the
sparkplug.
6. Start the engine.
7, Move the clutch lever to the desired trim-
ming height.
A WARNING: While the engine is
running, never leave the Edger.
Before you adjust the wheels or
change the blade position, always dis-
engage the cutting blade end stop the
engine.
F-OO1106M 12
OPERATION
HOW TO USE THE CURB-HOPPING FEATURE
Because the front wheel and the dght rear wheal until the front wheel is level with
wheel are adjustable, the Edger can be used the left rear wheel and the unit Is setting
cn uneven surfasas, such as the curb shown on the curb as shown in Figure 12.
in Figure 12. Set the wheel positions as fol-
lows. 7. Loosen the rear wheal knob.
1. Stopthe engine.
2. Disconnectthe sparkplugwirefromthe
sparkplug.
8. Lower the right rear wheel unUlthe
Edger is level and the left rear wheel is
on the curb.
3. Loosenthefront wheal knob.
4, Slidethe front wheel fo the bast posi-
tionto clearthe curband balancethe
unit,
9. Securelytightenthe rear wheel knob,
10. Connectthe sparkplugwire to the spark
plug.
5. Securely tighten the front wheel knob.
6. Use the curb height adjust lever to
lower the front wheal. Lower the front
A ARNING: Keep away from the
rotating blade. The blade can
cause Injury.
Support Rod
Rear Wheel Knob
BladeGuard
Front
WheelKnob
Front Wheel
F-001106M 13
Figure12
OPERATION
HOW TO STOP THE ENGINE
To stop the engine, move the clutch lever all
the way back to the DISENGAGED poeition.
Then, push the throffie control lever down to
the STOP position.
If the enginewill notstop,hold a screwdriver
againstthe sparkplugand againstthe engine
coolingfins.The sparkwillgoto groundand
theenginewill stop.
HOW TO START THE ENGINE
IMPORTANT: Before you start the engine,
operate the controls several times. Make
sure all controls move freely.
1. Checkthe oil.
2. Fillthe fueltankwithmgulm unleaded
gasoline,Makesurethe gasolineis
clean. Leadedgasolinewillincreasede-
positsand shortenthelife of the valves.
NOTE: Do not use gasohol or methanol.Do
not use premium unleaded gasoline.
A ARNING: Always use s safety
gasoline container. Do not
smoke when adding gasoline to
the fuel tank. When inside an encieaure,
do not add gasoline. Before you add
gasoline, stop the engine and let the en-
gine cool for several minutes.
3. Makesurethe sparkplugwireis con-
nectedto the sparkplug.
4. Pullthe clutchleverall the waybackto
raiseand disengagethe blade.
5. Movethe throttle controlleverto the
FASTposition.
6, Some models have a primer button on
the that or side of the engine (Figure 13).
Every time you push the primer button,
wait two seconds. For the number of
times required to push the primer but-
ton, see the engine manufacturer's in-
struc_ons.
F-OO1106M
NOTE: Do not usathe primer buttonto start
a warm engine.
7. TO start engine, hold the recoil starter
handle firmly with your right hand.
8. Holdthe edger handlefirmlywith your left
hand.
Quicklypullthe recoilstarter handle.DO
NOTallow the starterrope to snap back.
Letthe starterropeslowlyrewind.If an-
ginsfailsto startafterthree pulls,push
primerbuttontwotimesand againpull
the recoilstarterhandle.
14
10.Whan the engine starts, move the throttle
control lever up (FAST p<_ition) to in-
crease speed or down to decrease
speed. During normal usa keep the
throttle in the FAST position.
11.Ifthe enginedoes notstartin 5 or 6 ties,
Seethe "Problemand Repair"Instruc-
tions.
NOTE: The cutting blade speed la con-
trolled by the engine speed. To reduce the
cutting blade speed, push down on the
throttle control lever, To increase the cut-
ring blade speed, pull up on the throttle
control lever.
A ARNING: Never run the engine
Indoors or in s poorly ventilated
area. Engine exhaust contains
carbon monoxide, an odorless and
deadly gas. Keep hands, feet, hair and
looseclothing away from any moving
parts. Avoidthe muffler and surround-
ingareas. Temperaturescan exceed 150
degrees.
OPERATION
EDGING TIPS
Edging is best performed when cor_liUo_s
are dry. If the soil is to wet, dirt becomes
packed around the blade causing prema-
ture belt wear and decreased partor-
mancs.
If dirt does become packed around the
blade, stop the engine and remove the
wire from the spark plug. Remove the
packed dirt and debris from the blade.
For deap edging, firstcutat shallow
depths.Then, cutat greaterdepthsuntil
the desireddepth is obtained.
Foruniformedging, makesurethe blade
guideddeson the surface.
Edgingcanbe customizedby varyingthe
numberof passesandby the distancethe
bladeisfrom the surtaca.
A ARNING: Read the Owner's
manuel. Know location and
functions of all controls. Keep
all safety devices end shleids in place,
Never allow children or unlnstruofed
adults to operate Edger. Shut off engine
before unclogging blade or making re-
palre. Keep bystanders away from me.
chine. Keep away from the blade all ro-
tetlng parts, which cause injury.
F-OO1106M 15
MAINTENANCE
CUSTOMER RESPONSIBILITIES
SERVICE
RECORDS
Fillin datesasyou Before Every Every Before
completeregular Each tO 25 Each Before SERVICE
service, use Often Hours Hours Season Storage DATES
Lubricate Wheel
Axles _/ ._
Change Engine Oil _/ _/
Check Spark Plug _/ _/
ghten All Fasteners _/
Lubricate Quill Rod/ _/ _
tube
PRODUCT SPECIFICATIONS
Model No.: 536.772400
Date Of Purchase:
Horse Power: 3.5
Dlsplaoement: 10 cu. in.
(163 cc.)
Oil Capacity: 20 oz. SAE-30W
Spark Plug: Champion
RJ17LM
Spark Plug Gap: 0.030 inch
GENERALRECOMMENDA_ONS
The warranty on this Edger does not cover
items _t have been subjected to operator
abuse or negligence. To receive full value
from the warranty, the operator must main-
tain the Edger as instructed in this manual.
Someadjustments mustbe madeperiodical-
lyto propedymaintainyourEdger.
All adjustments in the Service and Adjust-
ments section of this manual must be
checked at least once each season.
F-001106M 16
MAINTENANCE
LUBRICATION
Aftereach 25 hours,applya smallamountof
engineoil to all movingparts,particularlythe
wheels.
How To Change The Engine OII
Change theoilinthe enginecrankcaseafter
each 25 hoursof use.
NOTE:The oil will drain more freely when
the engine Is warm.
1. Disconnectthe sparkplugwirefromthe
sparkplug.
2. Removethe oil drain plug (see
Figure 14).Drainthe oilintoa fiat pan.
3. Afterdrainingallthe oil,installand tight-
an the oll dreln plug.
4. Removethe oll fill cap (see Figure15).
Fillthe enginecrankcase.Pourslowly.
Do notoverfill.See "ProductSpecifica-
tions"for amountandtypeof oil. Install
the oll fill cap.
5. Connectthe sparkplugwireto the spark
plug.
Oil Fill Cap
/
Figure1_=
HOWTO CHANGETHEAIRRLTER
Replacethe air filteroncea year;more often
in dustyor dirtyconditions.
NOTE: DO NOT clean or oll the air filter.
The air filter Is not serviceable and must
be replaced.
1. Disconnect the spark plug wire from the
spark plug.
2. Turn the cover to the left (counterclock-
wise). Remove the cover and the air fil-
ter from the flange, (see Figure 16).
3. Discardthe sir filter.
4. Cleanthe cover andthe flange.
5. Installa new air filter intothe cover,
6. Pushthe cover firmlyagainstthe
flange. Tumthe cover to the right
(clockwise)untiltight.Make surethe re-
telnere are lockedaroundthe flange.
CAUTION: Never run the engine without
the air filter. A defective air filter will
cause lose of engine power. If dirt or
dust enters the engine through the earbu-
retor, the result will be exceealve wear or
damage to the engine. Replace a dam-
aged or clogged air cleaner Immediately.
Flange
Cover
7. Connect the spark plug wire to the spark
plug.
F-OO1106M 17
MAINTENANCE
SPARK PLUG
Checkthe spark plug every25 hoops.Re-
place the spark plug ifthe electrodesare
pitted,bumed,orifthe pomelainis cracked.
Make sure the spark plug is clean.
Clean the spark plug by carefully scrap-
ing the electrodes (do not sand blast or
usa a wire brush).
I
moval._ghten the sparkplugto a torque
of 15foot-pounds.
Feeler0.030"Gauge I
2. Checkthe spark plug gap withafeeler
gauge.
3. Before installing the spark plug, coat
the threads lightly with oil for easy re-
CARBURETOR ADJUSTMENT
Nevermake unnecessaryadjustmentsto the
carburetor.The carburetorwasset at the
factoryto operateefficientlyundermostap-
plications.However,ifadjustmentsarere-
quired,we recommendyoucontactyour
nearestSearsServiceCenter.
A WARNING:The engine gover-
nor Is set at the factory. Do not
change the governor setting,
Over speeding the engine above the fac-
tory setting can be dangerous. If you
think the engine governor needs an sd-
|ustment, contact your nearest Sears
Service Center.
F-001106M 18
SERVICE AND ADJUSTMENT
HOW TO REMOVE THE BELT
The beltmadeof a specialcompound.If the
beltbecomeswom orbreaks,replacethe
beltwithan odglnalequipmentbelt.
4. Loosen,donotremove,the ecrewthat
holdsthe belt guide. Then, movethe
belt guide away fromthe belt.
1. Disconnectthe sparkplugwirefromthe
sparkplug.
2. Pull the clutch lever back to release the
tension from the belt.
3. Removethe twoecrews end spa(ere
fromthe top of the engine pulley cover.
Removethe engine pulley cover (see
Figure18).
5. Removethe twoscrews fromthebelt
guard (see Figure19).
6. Removethe oldbelt fi'omtheengine
andquillassemblypulleys.Replacewith
an odglnalequipment belt.
7. Toinstalla new belt, reversethe above
steps.
BeltGuard
Screw
Figure19
F-OO1106M 19
SERVICE AND ADJUSTMENT
HOW TO REPLACE THE BLADE
The bladeis subjectto wear and damage,
suchas nicksanddents.This willnotgener-
allyaffectitsfunction,
The blade is designed to not require sharp.
ening. Do not attempt to sharpen the blade.
The blade is also reversible. If nicks or
dents are excessive, remove the blade and
tum it around. This will provide a fresh cut-
ting edge. Replace the blade if both sides
are wom or damaged.
1. Disconnectthe sparkplugwirefrom the
sparkplug.
2. Removethe blade Iocknut that holds
the blade to the ddve shaft.
A ARNING: To remove or tigh-
ten the blade Iocknut, always
use the method shown In
Figure 20. Always position the holding
wrench on the nut behind the blade.
A ARNING: Do not sharpen the
blade. Sharpening can damage
the blade end cause it to break,
which can cause Injury to yourself or to
others.
3. Remove the blade.
4. Install a new blade and blade look.nut.
Tighten the blade tocknut to a torque of
40-45 foot pounds.
Toreplace the blade, followthe stepsbelow. 5. Connectthe sparkplugwireto thespark
plug.
TumWrench
To"nghten Locknut
Blade Looknut
Hold NUt,
Do Not Turn
Rgure 20
F-(]O1106M 20
SERVICE AND ADJUSTMENT
STORAGE
A ARNING: Never store the
Edgor indoors with fuel In the
fuel tank. Never store In an en-
closed, poorly ventilated area where
fumes could reach an open flame, a
spark or • pilot light as on a furnace, ws.
tar heater or clothes dryer.
A ARNING: Do not remove gaS-
oline while inside abuilding,
near afire, or while you smoke.
Gasoline fumes can cause an explosion
or a fire.
When the Edger is put in storage for thirty
days or more, follow the steps below to
make sure the Edger is in good condition the
following season.
Edger
Completelycleanthe Edger.
Checkthe Edgerfor wom ordamaged
pads.Tightenall loosehardware.
Applya smallamountof engineoilto all
movingpads, psrticulady the wheels.
Putthe Edgerin a buildingthat has good
vanttiation.
Cover the Edgerwitha suitableprotec-
tive coverthatdoes not retainmoisture.
Do not use plastic.
IMPORTANT: Never cover the Edgar while
the engine and exhaust areas are still
warm.
NOTE: A yearly checkup or tune-up by a
Sears Service Center is a good way to
make sure that your Edger will _ovldo
maximum performance for the next sea-
son.
Engine
IMPORTANT:It Is important to prevent
gum deposits from forming Infuel system
parts such as the carburetor, fuel filter,
fuel hose, and tank during storage. Also,
using alcohol-blended fuels (called gaso-
hoi, ethanol or methanol) can attract
molsturs which leads to aeparstlon end
formation of acids during storage. Acidic
gas can damage the fuel system of an an-
gins while In storage.
To prevent engine damage when the Edger
is in storage for 30 days or more, follow the
steps below:
Let the engine run until it is out of gaso-
line.
If youdo not wantto removethegaso-
line.adda fuelstabilizerto any gasoline
leftinthe fueltank. Afuel stabilizerwill
minimizegumdepositsandacids. Ifthe
fueltank is almostempty,mix the fuel
stabilizerwithfresh gasolineina sepa-
rate containerand addthe mixtureto the
fuel tank. Alwaysfollowthe instructions
onthe stabilizercontainer.Startthe an-
gins. Letthe enginerunfor 10minutes
to allow the mixtureto roachthe carbu-
rotor.
Change the engine oil. See "How To
Change The Engine Oil" in the Mainte-
nance section.
Lubdcatathe piston/cylindarares. This
can bedone byfirstremovingthe spark
plugandsquirtings smallamountof
clean engineoilintothe sparkplughole.
Then, coverthe sparkplug holewitha
ragto absorboilspray.Next, rotatathe
engineby pullingthestartertwo orthroe
Umes. Finally,installthe sparkplugand
attachthe sparkplugwire.
Storethe Edgerinthe operatingposition
withthe wheelsdown.Ifthe Edgeris
storedinanyotherposition,oilfrom the
crankcasewillenterthe cylinderand
cause a sentise problem.
F-001106M 21
TROUBLE SHOOTING CHART
TROUBLE
Engine difficult to start
or
Engine runs ermticelly
or
Engine will not run st full
speed
Engine smokes
excesaively
Cutting blade will not
rotate
Blade will not cut properly
Excessive vibration
CAUSE
Stalefuel
Cloggedfuel filter
Dirtinfueltank oroutof fuel
Carburetoroutof adjustment
Fouledsparkplug
Dirty air filter
Plugged air filter
Clean debris from blade.
Debris interfering with blade
Loose blade
Defec_ve V-belt
Defective quill beadngs
Damage or worn blade
Looseparts
CORRECTION
Drainfuel tank. Fillwith fresh
fuel.
Replacefuelfilter
Cleanfuel tank.
Takeunitto a SearsService
Center.
Clean andset sparkplug
gap.
Replaceairfilter.
Replace airfilter.
"nghtenbladenut.
Replace V-bait.
Replace the quillassembly.
Reversethe bladeor replace
the blade.
Stopengineimmediately.
Tightenallfasteners.If
vibrationcontinues,takethe
unitto a SearsService
Center.
F-O01106M 22

Navigation menu