Craftsman 610246262 User Manual EASY DUMP CART Manuals And Guides L0901385
CRAFTSMAN Cart/Dump Cart Attachment Manual L0901385 CRAFTSMAN Cart/Dump Cart Attachment Owner's Manual, CRAFTSMAN Cart/Dump Cart Attachment installation guides
User Manual: Craftsman 610246262 610246262 CRAFTSMAN EASY DUMP CART - Manuals and Guides View the owners manual for your CRAFTSMAN EASY DUMP CART #610246262. Home:Lawn & Garden Parts:Craftsman Parts:Craftsman EASY DUMP CART Manual
Open the PDF directly: View PDF 
.
Page Count: 10
| Download | |
| Open PDF In Browser | View PDF |
® EASY DUMP CART Model 610.246262 User Guide 16 cu. ft. heaped capacity. 1250 pound weight capacity. Removable tail gate. If you read and follow these instructions, this product can be assembled in 55 minutes or less. If you don't read these instructions, assembly may take over two hours! TO MINIMIZE ASSEMBLY TIME: • DO NOT tighten fasteners until instructed to do so. • Illustrated items shaded red are the parts being assembled in that instruction section. • Assemble unit on cardboard box to avoid scratches or damage to parts. For best results, two people are required for assembly. If there are any missing parts, or if you have any questions on assembly, operation, maintenance or safety, please call 1-800-652-2321 All fasteners are readily available for purchase at your nearest Sears store or local hardware store. Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. Visit our Craftsman website: www.sears.com/craftsman 610.246262 Rev E 3/06 Hardware Bag Contents @ REF. NO. 23 25 TOOLS AMT. 5O 5O @ BAG 2. DESCRI PTIO N 5/16"-18 5/16"-18 SUGGESTED keps nut x 3/4" pan head bolt FOR ASSEMBLY Large blade screwdriver 1/2" wrench and/or socket pliers cordless drill SAFETY INSTRUCTIONS Never exceed load capacity of cart - 1250 Ibs. When operating on slopes, use lowest ground speed and limit load to 200 Ibs. Do not carry passengers in cart. Do not use this cart on public roads. Operate up and down slopes, never across the face of slopes. Avoid sudden turns or maneuvers. MAINTENANCE & STORAGE Periodically check all nuts and bolts for Check tire pressure regularly. Grease wheels using zerk fitting at axle Keep cart clean and dry to prevent rust Store inside a clean, dry area when not REF. NO. 18 19 30 31 AMT. 2 4 1 3 for longer life. and corrosion. in use. OPERATION BAG 1. DESCRIPTION 1 3/8" axle spacer 3/4" axle washer thin hitch pin hairpin cotter #7 FOR MISSING tightness. PARTS, With cart attached to tractor, remove tailgate, and then pullback on latch bar. Cart body will tilt backwards, dumping contents. Once empty, replace tailgate, then pull cart body down until it latches. Make sure to use the hairpin cotter with the hitch pin when attaching to the tractor. Follow all operating instructions in tractors user guide. Call 1-800-652-2321, Monday Page 2. - Friday, 8 a.m. - 5 p.m.E.S.T. Carton Contents REF. NO. AMT. DESCRIPTION 1 1 riqht 2 1 left 3 1 4 2 front qate corner 5 1 1 1 1 6 7 8 rear tail body body REF. half half support bar qate qate retainer riqht qate retainer left FOR MISSING PARTS, NO. AMT. DESCRIPTION 9 1 11 1 12 1 17 1 hitch axle 21 2 wheel 36 1 assembly manual 41 1 hardware baq Call 1-800-652-2321, Monday Page 3. - Friday, front axle 8 a.m. support holder assembly #3 - 5 p.m.E.S.T. Body Assembly Step 1. Position Step 2. Loosely assemble Square assembly Note: Bolt four body halves (1 & 2) as shown. body halves (1 & 2). and tighten bolts. body halves together so that holes are aligned, as shown. the Note: Holes in bed of cart and Craftsman decals towards the outside. FOR MISSING PARTS, Call 1-800-652-2321, Monday Page 4. - Friday, 8 a.m. - 5 p.m.E.S.T. Add Front Support & Axle Holder Step 3. Loosely attach front Step 4. Loosely attach axle support holder (9). (11). TWO PEOPLE REQUIRED FOR EASIER ASSEMBLY. FOR MISSING PARTS, Call 1-800-652-2321, Monday Page 5. - Friday, 8 a.m. - 5 p.m.E.S.T. Front Gate / Corner Step 5. Lay Step 6. Insert Step 7. Loosely assemble Step 8. Loosely attach Step 9. Square corner, assembly and front support assembly front Assembly down gate as shown. (3), front two inside gate corners bed to of cart, bed with behind body bolts provided. flanges. (4). tighten all body and axle holder half, front bolts. gate, BODY FLANGE INSERT BEHIND FRONT GATE BODY FLANGE FOR MISSING PARTS, Call 1-800-652-2321, Monday Page 6. - Friday, 8 a.m. - 5 p.m.E.S.T. Add Axle, & Wheels Hitch, Step 10. Slide axle (17) through Step 11. Place axle washer (19), HDPE spacer (18), axle washer (19) and wheel (21) onto axle. Repeat for other side. Note: Make sure valve stem on wheels face towards the outside of cart. Step 12. Insert Step 13. Set cart hair pin cotter upright axle holder (31) in each (11) and hitch (12). end of axle (17). on wheels. face valve towards ?\Makewheels sure stemsthe on outside of cart. FOR MISSING PARTS, Call 1-800-652-2321, Monday Page 7. - Friday, 8 a.m. - 5 p.m.E.S.T. Rear Assembly Step 14. Loosely attach rear Step 15. Loosely attach gate Step 16. Insert Step 17. Insert hitch with hairpin tailgate (6) support bar retainers and BEHIND (7 & 8) tighten pin (30) into cotter (31). (5) hitch all and using support rear common bar and flanges holes gate of the assembled to each retainer body halves using side. bolts. secure REAR FLANGE See step 14. Center two holes-- FOR MISSING PARTS, Call 1-800-652-2321, Monday Page 8. - Friday, 8 a.m. - 5 p.m.E.S.T. center two holes only. Repair Molel Parts Number List REF. NO, PART NO. - 610.246262 \\\\\\\\\\\\\ 5 25 1 RIGHT 2 262- 02 1 LEFT 3 26- 03 1 FRONT 4 55- 04 2 CORNER 5 26- 05 1 REAR SUPPORT 6 262- 06 1 TAIL 7 55-7A 1 GATE RETAINER RIGHT 8 55-8A 2 GATE RETAINER LEFT 9 55-9A 1 FRONT 11 26- 11 1 AXLE 12 26- 12A 1 HITCH ASSEMBLY 13 55- 13A 1 LATCH POST BAR 3/8"- STDBH3754000 /21 30_ 14,13 35 19 18 j 16 31 19 / 29 15 29 FOR MISSING Call 1-800-652-2321, Monday Page 9. BAR GATE SUPPORT HOLDER LATCH BOLT 1 LATCH SPRING 16 26- 16A 1 HITCH BRACKET 17 26- 17 1 AXLE 18 26- 18 2 HDPE SPACER 4 AXLE STDWA1000T 26- 21 2 WHEEL STDNK313 50 5/16"-18 25 STDBP3130750 50 5/16"-18 28 STDBH3750750 1 3/8"-16 29 STDNC375 2 3/8"-16 30 STDHP375 1 HITCH 31 STDPH7 3 HAIR 35 262-D 2 DECAL 36 262- 36 1 USER GUIDE 41 262- BB 1 HARDWARE - Friday, 8 a.m. - 5 p.m.E.S.T. 16 x 4" HEX WASHER 23 ) PARTS, HALF GATE 1 12 ,41 BODY HALF 55- 15A 21 _i BODY 15 19 9 DESCRIPTION 262-01 14 8 AMT. 1 KEPS NUT x 3/4 PAN HEAD X 3/4" HEX HEAD LOCK NUT PIN PIN BAG FULL TWO-YEAR WARRANTY If this product fails due to a defect in material or workmanship Sears will at our option repair or replace it free of charge. This are expendable and become worn during normal use. This warranty does not cover: • Repairs necessary because of operator abuse or negligence. • Equipment used for commercial or rental purposes. Contact your nearest Sears of purchase for replacement. This warranty state to state. Sears, Roebuck PRODUCT Service Center to arrange and Co, Dept. 817 WA, Hoffman Estates, Date Keep this booklet and your place for future reference. product repair, also have is in use Sears receipt in a safe or return this product other rights which may in the United States. to place vary from IL 60179 ORDERING RECORD Number Purchase for gives you specific legal rights, and you may This warranty applies only while this product In the space below record the model number and purchase date of your cart. The model number can be found on the decal on the hitch. Model within one year from the date of purchase, warranty excludes tires and wheels, which INFORMATION After the one year warranty period be ordered by calling Sears service 1-800-4MY-HOME (1-800-469-4663) all parts at When ordering repair following information' give parts, always the Product 16 C.F. Heaped Easy Dump Cart Model Number610.246262 Part Number* Part Description - * *Found on the repair part list. Reference page 9. may
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 10 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 4, 0, 0, 13 Create Date : Wed Feb 11 04:55:15 2009 Author : Title : Subject :EXIF Metadata provided by EXIF.tools