Craftsman 706132470 User Manual TOOL DRAWER Manuals And Guides L1002164

CRAFTSMAN Tool Frame Mobile Manual L1002164 CRAFTSMAN Tool Frame Mobile Owner's Manual, CRAFTSMAN Tool Frame Mobile installation guides

User Manual: Craftsman 706132470 706132470 CRAFTSMAN TOOL DRAWER - Manuals and Guides View the owners manual for your CRAFTSMAN TOOL DRAWER #706132470. Home:Tool Parts:Craftsman Parts:Craftsman TOOL DRAWER Manual

Open the PDF directly: View PDF PDF.
Page Count: 4

f
Tool Storage
Roll-Away
THIS OPERATING INSTRUCTION MANUAL
COVERS ALL THE PROFESSIONAL SERIES
ROLL-AWAYS.
PROFESSIONAL SERIES
Please indicate the following information
from the service part drawing provided.
Model
Number:
Model
Description:
CAUTION: Read and follow all Safety
Rules and Operating Instructions before
first use of this product. Retain this
document for future reference.
Sears, Roebuck and Co.
Hoffman Estates, IL 60179 U.S.A.
F1374A1
f -,,
Call 1-800-366-7278 for
Service Parts
Refer to Service Parts Drawing for full
_.._ listing of Service Parts
SAFETY RULES AND WARNINGS"
• DO NOT stand on this product. You may fall which may cause personal injury.
• WEAR SAFETY GLASSES AND GLOVES when cutting the banding material. The
bands may snap which may cause personal injury.
• Stacked products should be bolted together. The products could become unstable and
tip, which may cause personal injury or product damage.
• WEAR SAFETY GLASSES when removing or repositioning the slides. The tool could
slip which may cause personal injury.
• When moving this product, do not pull it. Push the product to prevent personal injury.
• Handle and swivel casters must be attached on the same side of the product.
• USE THE BRAKES when not moving this product. This will prevent the product from
rolling, which may cause personal injury or product damage.
• BE CAREFUL when opening more than one drawer. The product may become unstable
and tip, which may cause personal injury or product damage.
• DO NOT mount this product on a truck bed or any other moving object. This may cause
personal injury or product damage.
• DO NOT step in the drawers. You may fall which may cause personal injury.
• Appropriately secure this product before moving it with a forklift.
• DO NOT tow with power equipment. The product could tip, which may cause personal
injury or product damage.
• DO NOT alter this product in any manner. For example, do not weld external tockbars or
attach electrical equipment. This may cause product damage or personal injury.
• A heavy duty side cabinet must be used on an equally heavy duty roll-away.
• Keep the product on level surfaces. The product may become unstable and tip if stored
or moved on an un-level surface, which may cause personal injury or product damage.
• Lock the drawers and doors before moving this product. The drawers or doors could
come open and make the product unstable and tip, which may cause personal injury or
product damage.
• The maximum weight for each drawer should be no more than 50 pounds.
• The maximum product weight, including contents, cannot exceed 1,180 pounds.
f
DRAWER REMOVAL:
• Fully extend the drawer. Push it back a quarter of an inch.
• Insert a screwdriver into the slot in the slide and push
in on the stop until it clears the lance. Repeat the procedure
on the other slide and remove the drawer.
• To reinstall, pry the stop far enough out to engage the
lance and push the drawer onto the slides until the stops
pass over the lances.
Slot .z Stop
Lance
LUBRICATION: Lubricate the top and bottom channels
of the drawer slides at least twice a year.
HANDLE INSTALLATION: (dependant on model)
• Insert the handle tabs into the slots inthe end of the roll-away.
• Attach the handle using four 1/4-20 x 3/8 slotted round head screws.
• Insert one plug in each end of the side handle.
LOCKING THE UNIT:
If the unit has no panel, the tock activates the locking mechanism.
• To unlock, turn the key to the right and the unit is unlocked.
• To lock, make sure all drawers are fully closed, turn the key, then remove the key.
If the unit has a panel, the panel activates the locking mechanism.
• To unlock the unit, turn the key to the right and the panel automatically springs open at
the bottom. Pull out, lift up and push the panel back into the unit.
• To lock, pull panel straight out, then lower, press lightly at the bottom and turn the key
CASTER INSTALLATION:
• Lay the roll-away on its back. Use packaging material to protect the finish.
• Mount both swivel casters on the same side of the unit as the side handle.
• Attach the casters using four 14-10 x 5/8 screws on each caster.
• Wrench tighten all screws. It is recommended not to exceed 80 inch pounds of torque.
• Return the unit to its upright position.
f
I(RRFTSMRN°I
Caja deslizable para
herramientas
ESTE MANUAL DE
INSTRUCCIONES DE OPERACION
CUBRE TODAS LAS
SERIE PROFESIONAL
SERIE PROFESIONAL
Sirvase indicar la siguiente informaciSn
que encontrar4 en el dibujo suministrado
de la pieza de servicio.
Numero de modelo:
Descripcion del modelo:
CUIDADO: Antes de utilizar este
producto por primera vez, tea y observe
todos los reglamentos de seguridad y tas
instrucciones de operaci6n. Guarde este
documento para referencia futura.
Sears Roebuck and Co.
Hoffman Estates, IL 60179, EE.UU.
F1374A1
Para solicitar piezas de
repuesto, Ilame al
1-800-659-7084
servicio para obtener una lista
F
• El peso maximo del producto, incluyendo su contenido, no puede ser mayor de 1,180 libras.
REGLAMENTOS DE SEGURIDAD Y ADVERTENCIAS:
•NO se pare sobre este producto. Se puede caer ylesionarse.
•USE GAFAS Y GUANTES DE SEGURIDAD al cortar los zunchos. Estos pueden romperse
bruscamente y ocasionar lesiones personales.
• Los productos apilados se deben atornillar entre si. Podrian quedar inestables y volcarse, Io cual
podria causar lesiones personales o daSos al producto.
• USE GAFAS DE SEGURIDAD al quitar o volver a colocar las correderas. Se podria resbalar la
herramienta y causar lesiones personales.
• AI mover el producto, no tire del mismo. EmpQjelo, de esta manera evitara lesiones personales.
• La manija y las ruedecillas giratorias deben instalarse en el mismo lado del producto.
• USE LOS FRENOS cuando no este moviendo este producto. Esto impedira que ruede, Io cual
podria causar lesiones personales o daSos al producto.
• TENGA MUCHO CUlDADO al abrir varias gavetas. El producto podria quedar inestable y volcarse,
Io cual podria causar lesiones personales o daSos al producto.
• NO instale este producto sobre la plataforma de un cami6n ni sobre ningen otro objeto m6vil. Esto
podria causar lesiones personales o daSos al producto.
• NO se pare en las gavetas. Se puede caer y lesionarse.
• Antes de mover este producto con un montacargas, asegerelo de manera adecuada.
• NO remolque el producto con un equipo motorizado. Se puede volcar y causar lesiones personales
o daSos al producto.
• NO modMque este producto de ninguna forma. Por ejemplo, no suelde barras de bloqueo ni fije
equipos electricos. Esto podria causar daSos al producto o lesiones personales.
• Un gabinete lateral extrafuerte se debe usar en una caja deslizable que tambien sea extrafuerte.
• Mantenga el producto sobre superficies niveladas. Si se guarda sobre una superficie desnivelada,
o se mueve a ella, el producto podria quedar inestable y volcarse, Io cual podria causar lesiones
personales o daSos al producto.
• Asegure las gavetas y puertas antes de mover este producto. Estas se podrian abrir y hacer que el
producto quede inestable y se vuelque, Io cual podria causar lesiones personales o daSos al
producto.
El peso maximo en cada gaveta no debe ser mayor de 50 libras.
J
/"
RETIRO DE LA GAVETA:
• Abra por completo la gaveta Hagala retroceder 6 mm
• Introduzca un destornillador dentro de la abertura en la
corredera y empuje el tope hasta que sobrepase la lanceta
Repita el procedimiento en la otra corredera y quite la gaveta
• Para volver a instalar la gaveta, fuerce el tope Io suficiente
para enganchar la lanceta y empuje la gaveta dentro de las
correderas hasta que los topes sobrepasen las lancetas
LUBRICAClON: Lubrique los canales superior e inferior de las
correderas de la gaveta cuando menos dos veces al aSo.
INSTALACION DE LA MANIJA: (segun del modelo)
• Introduzca las pestaSas de la manija en las aberturas en el extremo de la caja deslizable.
•Asegure la manija usando cuatro tornillos de cabeza redonda ranurada de 1/4-20 x 3/8.
• Inserte un tap6n en cada extremo de la manija lateral.
PONER SEGURO A LA UNIDAD:
Si la unidad no tiene ningQn panel, el seguro activa el mecanismo de cierre.
• Para quitar el seguro a la unidad, gire la Ilave hacia la derecha y quedara sin seguro.
• Para poner seguro a la unidad, cerci6rese de que todas las gavetas esten bien cerradas, gire la
Ilave y quitela.
Si la unidad tiene un panel, este activa el mecanismo de cierre.
• Para quitar el seguro a la unidad, gire la Ilave hacia la derecha y el panel se abre automaticamente
en la parte inferior. Tire del panel hacia afuera, levantelo y empQjelo de nuevo dentro de la unidad.
• Para poner seguro a la unidad, tire del panel derecho hacia afuera, bajelo, presione ligeramente en
la parte inferior y gire la Ilave.
INSTALACION DE LAS RUEDECILLAS:
• Acueste la caja deslizable sobre su parte trasera. Proteja el acabado con material de embalaje.
• Instale las dos ruedecillas giratorias en el mismo lado de la unidad que la manija lateral.
• Asegure las ruedecillas usando cuatro tornillos de 14-10 x 5/8 en cada una.
• Apriete todos los tornillos con una Ilave. Se recomienda no torsionar a mas de 80 pulg.-Ibs.
• Vuelva a colocar la unidad en su posici6n vertical.
J
65287 103-Pc. Socket Organizer (R/C)
• Three plastic socket trays, 6.5" x 8"
• Also includes twenty-five 1/4-in.,
fifty 3/8-in., and twenty-five 1/2-in.
drive socket pins
65172 Socket Organizer (Grey) (R)
65165 Socket Organizer (Red) (C)
, Six-tray set consists of SAE and Metric
1/4-in, 3/8-in, and 1/2-in drive trays
, Organizes up to 195 shallow or deep
well sockets and provides a visual
inventory to identify missing sockets
65397 Universal Divider System (R)
• Divides drawers for organization
• Slotted top design may also be used
to hold wrenches in place
• Strips may be cut to desired lengths to
customize drawer organization
65417 Foam Drawer Organizer (R)
• Foam inserts organize three chest
drawers or two roll-away drawers
• includes two foam inserts 16.75" x
22.38" x 0.5" thick, a retractable knife,
two adhesive layout sheets, and
instructions
65278 Plastic Divider System (R)
•includes sixteen "T" connectors, four
16 1/4-in. "L"-shape dividers, and
adhesive tape
• Organizes up to four drawers
without cutting for easy installation
65296 Chest Drawer
Tray Organizer (R)
• 11 pockets in a variety
of sizes for storage of small items
•Fits all 22.5"W x 10.75"D x 2"H
Craftsman chest drawers
65297 Roll-Away
Tray Organizer Set (R)
•3 trays with small, medium, and large
pockets
•Fits all 22.5"W x 16.75"D x 3"H
Craftsman chest and roll-away drawers
Foam Drawer Liners
65215 6-Pc. Chest (R)
65216 5-Pc. Roll-Away (R)
65217 4-Pc. Portable Chest (R)
65502 85.5-1n. Length Roll (R)
• Foam drawer liners cushion drawer
bottom from scratches
• Resists thinners, battery acid, gasoline,
oil, and cleaning solvents
Open Weave Non-Slip Drawer Liners
65522 6-Pc. Chest (R/C)
65524 5-Pc. Roll-Away (R/C)
65514 85.5-1n. Length Roll (R/C)
• Prevents tools from sliding around in
drawers
• Thick, non-skid open weave design pulls
moisture away from tools reducing
corrosion
• Resists household chemicals and fuels
Mesh Non-Slip Drawer Liners
65498 6-Pc. Chest (R)
65499 5-Pc. Roll-Away (R)
• Prevents tools from sliding around in
drawer
• Non-skid open weave design pulls
moisture away from tools reducing
corrosion
• Resists thinners, battery acid, gasoline,
oil, and cleaning solvents
Foam Laminate Non=Slip Drawer Liners
65532 6-Pc. Chest (R)
65534 5-Pc. Roll-Away (R)
. Black, thick foam laminate, non-slip/tear
resistant material
.Prevents tools from sliding around in
drawers
.Resists thinners, battery acid, gasoline,
oil, and cleaning solvents
Top Mats
65652 26 I/4"VM x 17 314"D (R)
65660 26 1/4"W x 17 314"D (Diamond
Embossed Pattern) (R)
•ideal when using the top of a roll-away
as a work table
• Oil and grease resistant
• Prevents tools from sliding
• Protects roll-away tops from scratches
65273 Screwdriver
Organizer (R)
• Holds up to 13
Craftsman Screwdrivers
° Designated area for
offset and micro
screwdrivers
65213 Folding Metal
Side Shelf (R/C)
• Holds up to 70 Ibs. and
includes braces
• Measures 18"x 15"x 14"
65272 Wrench Organizer (R)
° Holds up to 12
wrenches
° Fits inside 3-in.
high drawer or
mounts to wall
65970
3=Piece
Accessory
Kit (R)
•Wrenchorganizerholds up to 12wrenches
•Screwdriver organizer holds up to 13
screwdrivers
, Riser measures 22" x 12" x 9 1/2"
Lock Sets (R)
65573LockSetfor CraftsmanHomeownerChest,IntermediateChest,andRoll-Away
65584LockSetfor CraftsmanPremiumorBali-BearingChest,IntermediateChest,
and Roll-Away
65587LockSetfor Craftsman40-in.WideChest,MobileToolCart,andSecurityDrawer
•Three overmolded reversible keys included
•Allows you to key all your tool storage units to the same lock.
65276 6 x 2-In. Caster Set (R/C) 65198 Decal Set (R)
65207 6 x 2=In. Caster Set (C) • Five decal strips,
Set of four casters, including Craftsman
two swivel with toe Iogos and racing
brake and two rigid decals
Use with Craftsman
roll-aways and mobile
tool carts
(R) Available through Retail only, (C) Available through Catalog only, (R/C) Available through both
All items are available on-line at www.Sears.com • TOOLS NOT iNCLUDED
1
59883 12" Deep, 3-Drawer
Intermediate, Red(R/C)
•All drawers measure 22.125"W x
I0.75"D; two are 2"H and one
is 4"H
•Fits between all Homeowner-
Quality chests and roll-aways
for an additional 1,877 cu. in. of
storage space
65144 16" Deep, 4-Drawer
65120 12" Deep, 3-Drawer
Intermediate, Red (R)
• 3 drawers measure 22.375"W x
I0.75"D; two are 2"H and one
is 4.125"H
• Fits between all Craftsman 12"
deep chests and roll-aways
• Red baked enamel shell with
charcoal baked enamel drawers
65130 12" Deep, 3-Drawer
Intermediate, Black(R)
• 3 drawers measure 22.375"W x
10.75"D; two are 2"H and one
is 4.125"H
• Fits between all Craftsman 12"
deep chests and roll-aways
• Black baked enamel shell and
drawers
65029 12" Deep, 4-Drawer
Intermediate, Red (R/B)
• 4 drawers measure 22.375"W x
10.75"D x 2"H
• Fits between all Craftsman 12"
deep chests and roll-aways
• Red baked enamel shell with
charcoal baked enamel drawers
• Also available: Blue 59925
Black 65950
Intermediate, Red (R/C)
• 4 drawers measure 22.375"W
x 14.5"D; three are 2"H and one
is 3.125"H
• Fits between all 12" and 16"
deep Craftsman chests and
roll-aways
• Red baked enamel shell with
charcoal baked enamel drawers
65030 18" Deep, 3-Drawer
Intermediate, Red (R/C)
• 3 drawers measure 22.375"VV x
16.375"D; one is 2"H, one is
3.125"H, and one is 4.125"H
• Fits between all Craftsman
chests and roll-aways
• Red baked enamel shell with
charcoal baked enamel drawers
59601 16" Deep, 4-Drawer
Bali-Bearing
intermediate, Black {R/C)
• Fits Craftsman 12" and 16" deep
chests and all Craftsman roll-aways
• GRIPLATCH TM ball-bearing action
drawer slides provide smooth
operation under heavy loads
• Also available: Red 59701
Blue 59895
59603 18" Deep, 3-Drawer
Bali-Bearing
intermediate, Black (R/C)
• Fits between all Craftsman
Bali-Bearing and Premiumchests
and roll-aways
• GRIPLATCH TM ball-bearing
action drawer slides provide
smooth operation under heavy
loads
• Also available: Red 59703
59604 40" Wide, 1-Drawer
Bali-Bearing
intermediate, Black (R/C)
• Fits between all Craftsman 40"
wide chests and mobile tool carts
•GRIPLATCH TM ball-bearing action
drawer slides provide smooth
operation under heavy loads
° Also available: Red 59704
65022 6-Drawer Side
Cabinet Red(R/C)
°All drawers are 11.75"W x
16.5"D; four are 3.125_'H, one is
4.125"H, and one is 12.75"H
° Can be mounted on either side
of any Craftsman roll-away at
least 41.25" high
° internal locking system with two
reversible overmolded keys
° Also available: Black 59931
65027 4-Drawer Side
Cabinet,
Red (C)
°All drawers are
13.75"W x 9.5"D x
2.75"H
° Door with lock and two
reversible overmolded
keys
° Can be mounted to
either side of any
Craftsman roll-away
65763 Bulk Storage
Cabinet,
Red(R/C)
° Two adjustable shelves
° T-handle has tumbler
lock with two reversible
overmolded keys
° Can be mounted to
either side of any
Craftsman roll-away
° Can also be mounted
to a wall as a wall
cabinet
59602 6-Drawer
Ball-Bearing Bide
Cabinet, Black (R/C)
• Can be mounted on either
side of any Craftsman
roll-away that measures
at least 41.25" high
• GRIPLATCH TM ball-bearing
slides
• Thick and durable work-
surface lets you work right
next to your tools
• Also available: Red 59702
59605 4-Drawer, Full
Height, Bali-Bearing
Side Locker, Black (R/C)
• Can be mounted on either
side of any 40" wide
Craftsman chest and tool
cart combination (tool cart
must be at least 41.25"
high)
• Also available: Red 59705
65142 6-Drawer
Tool Caddy,
Red (R/C)
• All drawers are
6.710"VV x 10.75"D x
2"H
• Internal lock system
with two reversible
overmolded keys
• Can be mounted on
either side of any
Craftsman roll-away
(R) Available through Retail only, (C) Available through Catalog only, (R/C) Available through both
All items are available on-line at www.Sears.com

Navigation menu