Craftsman 917378420 User Manual Gas, Walk Behind Lawnmower Manuals And Guides L0103070

CRAFTSMAN Walk Behind Lawnmower, Gas Manual L0103070 CRAFTSMAN Walk Behind Lawnmower, Gas Owner's Manual, CRAFTSMAN Walk Behind Lawnmower, Gas installation guides

User Manual: Craftsman 917378420 917378420 CRAFTSMAN Gas, Walk Behind Lawnmower - Manuals and Guides View the owners manual for your CRAFTSMAN Gas, Walk Behind Lawnmower #917378420. Home:Lawn & Garden Parts:Craftsman Parts:Craftsman Gas, Walk Behind Lawnmower Manual

Open the PDF directly: View PDF .
Page Count: 27

Download
Open PDF In Browser	View PDF

Owner's Manual

iCRnFTSMnN°I
6.75 HORSEPOWER
21" REAR DISCHARGE
POWER PROPELLED
ROTARY LAWN MOWER
Model No.
917.378420

•
•
•
•
•
•

Safety
Assembly
Operation
Maintenance
EspaSol
Repair Parts

CAUTION:
Read and follow all
Safety Rules and Instructions
before operating this equipment
Seam,

Roebuck and Co., Hoffman

Estates, IL 60179

Visit our Craftsman website: www.sears.com/cmftsman

Warranty ...............................................
Safety Rules .........................................
Assembly ..............................................
Operation ..............................................
Maintenance Schedule ......................
Maintenance .......................................

2
2
5
6
10
10

Product Specifications ........................ 11
Service and Adjustments .................... 13
Storage ...............................................
14
Troubleshooting
................................. 16
Repair Parts ........................................
35
Parts Ordering ..................... Back Cover

LIMITEDTWOYEAR
WARRANTY ON CRAFTSMAN POWER MOWER
For two years from date of purchase, when this Craftsman Lawn Mower is maintained,
lubricated, and tuned up according to the operating and maintenance instructions in
the owner's manual, Sears will repair free of charge any defect in material or workmanship.
If this Craftsman Lawn Mower is used for commercial
applies for only 90 days from the date of purchase.

or rental purposes, this warranty

This Warranty does not cover:
• Expendable items which become worn during normal use, such as rotary mower
blades, blade adapters, belts, air cleaners and spark plug.
• Repairs necessary because of operator abuse or negligence, including bent
crankshafts and the failure to maintain the equipment according to the instructions
contained in the owner's manual.
Warranty service is available by returning the Craftsman power mower to the nearest
Sears Service Center/Department in the United States. This warranty applies only
while this product is in use in the United States.
This Warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
Sears, Roebuck and Co., D/817 WA, Hoffman Estates, Illinois 60179

IMPORTANT= This cutting machine is capable of amputating hands and feet and
throwing objects. Failure to observe the following safety instructions could result in
serious injury or death.
I.GENERAL
OPERATION
• Be sure the area is clear of other
people before mowing. Stop machine if
• Read, understand, and follow all
instructions on the machine and in the
anyone enters the area.
Do not operate the mower when
manual(s) before starting. Be thorbarefoot or wearing open sandals.
oughly familiar with the controls and
Always wear substantial foot wear.
the proper use of the machine before
starting.
° Do not pull mower backwards unless
absolutely necessary. Always look
• Do not put hands or feet near or under
down and behind before and while
rotating parts. Keep clear of the
moving backwards.
discharge opening at all times.
• Only allow responsible individuals,
" Do not operate the mower without
proper guards, plates, grass catcher or
who are familiar with the instructions, to
other safety protective devices in place.
operate the machine.
• Crear the area of objects such as
° See manufacturer's instructions for
proper operation and installation of
rocks, toys, wire, bones, sticks, etc.,
accessories. Only use accessories
which could be picked up and thrown
approved by the manufacturer.
by the blade.
2

• Stop the blade(s) when crossing gravel
drives, walks, or roads.
• Stop the engine (motor) whenever you
leave the equipment, before cleaning
the mower or unclogging the chute.
• Shut the engine (motor) off and wait
until the blade comes to complete stop
before removing grass catcher.
• Mow only in daylight or good artificial
light.
• Do not operate the machine while
under the influence of alcohol or drugs.
• Never operate machine in wet grass.
Always be sure of your footing: keep a
firm hold on the handle and walk; never
run.
• Disengage the self-propelled mechanism or drive clutch on mowers so
equipped before starting the engine
(motor).
• If the equipment should start to vibrate
abnormally, stop the engine (motor)
and check immediately for the cause.
Vibration is generally a warning of
trouble.
• Always wear safety goggles or safety
glasses with side shields when
operating mower.
II. SLOPE OPERATION
Slopes are a major factor related to slip
and fall accidents which can result in
severe injury. All slopes require extra
caution. If you feel uneasy on a slope, do
not mow it.
DO:
• Mow across the face of slopes: never
up and down. Exercise extreme caution
when changing direction on slopes.
• Remove obstacles such as rocks, tree
limbs, etc.
• Watch for holes, ruts, or bumps. Tall
grass can hide obstacles.
_bO NOT:
• Do not trim near drop-offs, ditches or
embankments. The operator could lose
footing or balance.
• Do not trim excessively steep slopes.
• Do not mow on wet grass. Reduced
footing could cause slipping.
III. CHILDREN
Tragic accidents can occur if the operator
is not alert to the presence of children.
Children are often attracted to the
machine and the mowing activity. Never
assume that children will remain where
you last saw them.
• Keep children out of the trimming area
and under the watchful care of another
resi_onsible adult.

• Be alert and turn machine off if children
enter the area.
• Before and while walking backwards,
look behind and down for small
children.
• Never allow children to operate the
machine.
• Use extra care when approaching blind
comers, shrubs, trees, or other objects
that may obscure vision.
IV. SERVICE
• Use extra care in handling gasoline
and other fuels. They are flammable
and vapors are explosive.
-Use only an approved container.
- Never remove gas cap or add fuel
with the engine running. Allow
engine to cool before refueling. Do
not smoke.
- Never refuel the machine indoors.
- Never store the machine or fuel
container inside where there is an
open flame, such as a water heater.
• Never run a machine inside a closed
area.
• Never make adjustments or repairs with
the engine (motor) running. Disconnect
the spark plug wire, and keep the wire
away from the plug to prevent accidental starting.
• Keep nuts and bolts, especially blade
attachment bolts, tight and keep
equipment in good condition.
• Never tamper with safety devices.
Check their proper operation regularly.
• Keep machine free of grass, leaves, or
other debris build-up. Clean oil or fuel
spillage. Allow machine to cool before
stodng.
• Stop and inspect the equipment if you
strike an object. Repair, if necessary,
before restarting.
• Never attempt to make wheel height
adjustments while the engine (motor) is
running.
• Grass catcher components are subject
to wear, damage, and deterioration,
which could expose moving parts or
allow objects to be thrown. Frequently
check components and reptace with
manufacturer's recommended parts,
when necessary.
• Mower blades are sharp and can cut.
Wrap the bLade(s) or wear groves, and
use extra caution when servicing them.
• Do not change the engine governor
setting or overspeed the engine.

_Look for this symbol to point out
important safety precautions. It means
CAU'TION!!! BECOMEALERT!!!
YOUR
SAFETY IS INVOLVED.

_,WARNING: Engine exhaust, some of its
constituents, and certain vehicle
components contain or emit chemicals
known to the State of California to cause
cancer and birth defects or other
reproductive harm.
AWARNING: Battery posts, terminals and
related accessories contain lead and lead
compounds, chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm. Wash
hands after handling,

_. CAUTION: In order to prevent
accidental starting when setting up,
transporting, adjusting or making repairs,
always disconnect spark plug wire and
place wire where it cannot contact spark
plug.

CAUTION= Muffler and other engine
parts become extremely hot during
operation and remain hot after engine
has stopped. To avoid severe burns on
contact, stay away from these areas.

These accessories were available when this lawn mower was produced. They are not
shipped with your mower, They are also available at most Sears retail outlets and
service centers. Most Sears stores can also order repair parts for you, when you
provide the model number of your lawn mower. Some of these accessories may not
apply to your lawn mower.
LAWN MOWER PERFORMANCE

CLIPPING

DEFLECTOR

o.,_.v..._..,

FOR REAR DISCHARGE LAWN MOWERS

MULCHER KITS

REAR DISCHARGE
LAWN MOWERS

STABILIZER

SleE DISCHARGE
LAWN MOWERS
GAS CANS

LAWN MOWER MAINTENANCE

MUFFLERS

BELTS

AIR FILTERS

BLADES

BLADE ADAPTERS

SPARK PLUGS

WHEELS

SNGINE OIL

these instructions and this manual
;n its entirety before you attempt to
assemble or operate your new lawn
mower.
IMPORTANT: This lawn mower is
shipped WITHOUT OIL OR GASOLINE in
the engine.
Your new lawn mower has been assembled at the factory with the exception
of those parts left unassambled for
shipping purposes. All parts such as nuts,
washers, bolts, etc., necessary to complete the assembly have been placed in
the parts bag. To ensure safe and proper
operation of your lawn mower, all parts
and hardware you assemble must be
lightened securely. Use the correct tools
as necessary to ensure proper tightness.
TO REMOVE LAWN MOWER FROM
CARTON

HOWTO SET UPYOUR
MOWER
TO UNFOLD HANDLE

LAWN

IMPORTANT: Unfold handle carefully so
as not to pinch or damage control cables.
1. Raise handles until lower handle
section locks into place in mowing
position.
2. Remove protective padding, raise
upper handle section into place on
lower handle and tighten both handle
knobs.
3. Remove handle padding holding
operator presence control bar to
upper handle.
Your lawn mower handle can be adjusted
for your mowing comfort. Refer to "Adjust
Handle" in the Service and Adjustments
section of this manual.
Operator
controlbar

1. Remove loose parts included with
mower.
2. Cut down two end comers of carton
and lay end panel down fiat.
3. Remove all packing materials except
padding between upper and lower
handle and padding holding operator
presence control bar to upper handle.
4. Roll lawn mower out of carton and
check carton thorougly for additional
loose parts.

Upper handle
Lift up
Mowing

Lower handle

KNOWYOUR

LAWN MOWER

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
LAWN MOWER. Compare the illustrations with your lawn mower to familiarize yourself
with the location of various controls and adjustments. Save this manual for future
reference.
These symbols may appear on your lawn mower or in literature supplied with the
product. Learn and understand their meaning.

CAUTION
OR WARNING

ENGINE

OFF

FAST

SLOW

Enginezone controlcable

CHOKE

FUEL

OIL

DANGER, KEEP HANDS
AND

FEET AWAY

Operator presence control bar
Drive control lever

Starter
Handle knob

Grass catchq

Gasoline cap

Housing
cover
Engine

IMPORTANT: This lawn mower is
shipped WITHOUT OIL OR GASOLINE in
the engine.

Wheel adjuster
(on each wheel)

MEETS CPSC SAFETY REQUIREMENTS
Sears rotary walk-behind power lawn mowers conform to the safety standards of the
American National Standards Institute and the U,S. Consumer Product Safety Commission, The blade turns when the engine is running,
Operator presence control bar - must
be held down to the handle to start the
engine, Release to stop the engine,
Primer - pumps additional fuel from the
carburetor to the cylinder for use when
starting a cold engine.

Starter handle - used for starting the
engine.
Drive control lever - used to engage
power-propelled forward motion of lawn
mower.

TO CONVERT MOWER

The operation of any lawn
mower can result in
foreign objects thrown into
the eyes, which can result
in severe eye damage.
Always wear safety glasses or eye
shields while operating your lawn mower
or performing any adjustments or repairs.
We recommend a wide vision safety
mask over spectacles or standard safety
glasses.
HOWTO USEYOUR
LAWN MOWER
ENGINE SPEED

Yourlawn mower was shipped ready to be
used as a mulcher. To convert to begging :
REAR SAGGING
• Liftrear door of the lawn mower and place
the grass catcher frame hooksonto the
door pivot pins.
• To convert to mulching operation, remove
grass catcher and close rear door.
_I, CAUTION: Do not run your lawn mower
without clipping deflector or approved
grass catcher in place. Never attempt to
operate the lawn mower with the rear
door removed or I_ropped open.
Pivot
Grass catcher
handle

The engine speed was set at the factory
for optimum performance. Speed is not
adjustable.
ENGINE ZONE CONTROL
ACAUTION:
Federal regulations require
an engine control to be installed on this
lawn mower in order to minimize the risk
of blade contact injury. Do not under any
circumstances attempt to defeat the
function of the operator control. The blade
turns when the engine is running.
• Your lawn mower is equipped with an
operator presence control bar which
requires the operator to be positioned
behind the lawn mower handle to start
and operate the lawn mower.
TO ADJUST CUTTING HEIGHT
Raise wheels for low cut and lower
wheels for high cut, adjust cutting height
to suit your requirements. Medium
position is best for most lawns.
• To change cutting height, squeeze
adjuster _ever toward wheel. Move
wheel up or down to suit your requirements. Be sure all wheels are in the
same setting.
NOTE: Adjuster is property positioned
when plate tab inserts into hole in lever.
Also, 9-position adjusters (if so equipped)
allow lever to be positioned between the
plato tabs.
Plate Tab
Lower Wheels for High Cut

Catcher frame
TO EMPTY GRASS CATCHER
1. Open door and lift up on grass catcher
using the frame handle.
2. Remove grass catcher with clippings
from under lawn mower handle.
3, Empty clippings from bag using both
frame handle and bag handle.
NOTE: Do not drag the bag when
emptying; it will cause unnecessary wear.

Bag
handle

,td L

Lever

RaiseWheels for Low Cut

catcher frame
handle

DRIVE CONTROL
• Self-propelling is controlled by holding
thO operator presence control bar down
to the handle and pushing the drive
control lever forward until it clicks; then
releasing the lever.
• Forward motion will stop when the
operator presence control bar is
released. To stop forward motion
without stopping engine, release the
operator presence control bar slightly
until the drive control disengages. Hold
operator presence control bar down
against handle to continue mowing
without self-propelling.
• To keep drive control engaged when
turning corners, push down on handle
and lift front wheels off ground while
turning lawn mower.
Operator presence control bar
Drive
/x

cootrol

_,WARNING:
Experience indicates that
alcohol blended fuels (called gasohol or
using ethanol or methanol) can attract
moisture which leads to separation and
formation of acids during storage. Acidic
gas can damage the fuel system of an
engine while in storage. To avoid engine
problems, the fuel system should be
emptied before storage of 30 days or
longer. Drain the gas tank, start the
engine and let it run until the fuel lines
and carburetor are empty. Use fresh fuel
next season. See Storage Instructions for
additional information. Never use engine
or carburetor cleaner products in the fuel
tank or permanent damage may occur.
CAUTION: Fill to bottom of gas tank
filler neck. Do not overfill. Wipe off any
spilled oil or fuel. Do not store, spill or
use gasoline near an open flame.
Engineoilcap

Gasolinefiller cap

_i:_tro,
drive control "" disengaged
BEFORE
ADD OIL

STARTING

ENGINE

Your lawnmower is shipped without oil in
the engine. Engine holds 20 oz. of oil.
For type and grade of oil to use, see
"ENGINE" in Maintenance section of this
manual.
1. Be sure lawnmower is level and area
around oil fill is clean.
2, Remove engine oil cap and fill to the
full line on the dipstick. Pour oil slowly.
Do not over fill.
NOTE: Allow oil to settle down into engine
for accurate reading. To read proper level,
tighten engine oil cap, then remove it to
read the dipstick.
3. Reinstall engine oil cap and tighten.
• Check oil level before each use. Add
oil if needed, Fill to full line on dipstick.
• Change the oil after every 25 hours of
operation or each season. You may
need to change the oil more often
under dusty, dirty conditions.
ADD GASOLINE
• Fill fuel tank. Use fresh, clean, regular
unleaded gasoline with a minimum of
87 octane. Do not mix oil with gasoline, Purchase fuel in quantities that
can be used within 30 days to assure
fuel freshness.

TO START ENGINE
NOTE: Due to protective coatings on the
engine, a small amount of smoke may be
present during the initial use of the
product and should be considered
normal.
1. To start a cold engine, push primer
three (3) times before trying to start.
Use a firm push. This step is not
usually necessary when starting an
engine which has already run for a
few minutes.
2. Hold operator presence control bar
down to the handle and pull starter
handle quickly. Do not allow starter
rope to snap back.
TO STOP

ENGINE

• To stop engine, release operator
presence control bar.
NOTE: In cooler weather it may be
necessary to repeat priming steps. In
warmer weather over priming may cause
flooding and engine will not start. If you
do flood engine, wait a few minutes
before attempting to start and do not
repeat priming steps.

MOWINGTIPS
• Undercertainconditions,
such

•

as very
tan grass, it may be necessary to raise
the height of cut to reduce pushing
effort and to keep from overloading the
engine and leaving clumps of grass
clippings. It may also be necessary to
reduce ground speed and/or run the
lawn mower over the area a second
time.
For extremely heavy cutting, reduce the
width of cut by overlapping previously
cut path and mow slowly.
For better grass bagging and most
cutting conditions, the engine speed
should be set in the fast position.
When using a rear discharge lawn
mower in moist, heavy grass, clumps of
cut grass may not enter the grass
catcher. Reduce ground speed
(pushing speed) and/or run the lawn
mower over the area a second time.
if a trail of clippings is left on the right
side of a rear discharge mower, mow in
a clockwise direction with a small
overlap to collect the clippings on the
next pass.
Pores in cloth grass catchers can
become filled with dirt and dust with use
and catchers will collect less grass. To
prevent this, regularly hose catcher off
with water and let dry before using.
Keep top of engine around starter clear
and clean of grass clippings and chaff.
This will help engine air flow and
extend engine life.

MULCHING

MOWINGTIPS

IMPORTANT: For best performance,
keep mower housing free of built-up
grass and trash. See "Cleaning" in
Maintenance section of this manual.
• The special mulching blade will recur
the grass clippings many times and
reduce them in size so that as they fall
onto the lawn they will disperse into the
grass and not be noticed. Also, the
mulched grass will biodegrede quickly
to provide nutrients for the lawn.
Always mulch with your highest engine
(blade) speed as this will provide the
best recutting action of the blades.
• Avoid cutting your lawn when it is wet.
Wet grass tends to form clumps and
interferes with the mulching action.
The best time to mow your lawn is the
early afternoon. At this time the grass
has dried and the newly cut area will
not be exposed to the direct sun.
• For best results, adjust the lawn mower
cutting height so that the lawn mower
cuts off only the top one-third of the
grass blades. If the lawn is overgrown
it will be necessary to raise the height
of cut to reduce pushing effort and to
keep from overloading the engine and
leaving clumps of mulched grass. For
extremely heavy mulching, reduce your
width of cut by overlapping previously
cut path and mow slowly.
• Certain types of grass and grass
conditions may require that an area be
mulched a second time to completely
hide the clippings. When doing a
second cut, mow across or perpendicular to the first cut path.
• Change your cutting pattern from week
to week. Mow north to south one week
then change to east to west the next
week. This will help prevent matting
and graining of the lawn.
,_,;_,_,,_'_'_-__'_

Max 1/3

AS YOU

COMPLETE

REGULARSERVICE

J__

Check for Loose Fasteners
Clean/Inspect Grass Catcher

!/'

(If
Equipped)
Clean
Lawn Mower

(Power-Propelled
Clean Under Dnve Mowers)
Cover
Check ddve belt/ Ileys

_(_'_,_._

t/
if $

Lubrication Chart
Clean Battery/Rechar e
Electdc Start Mowe_ I

b1'

II/

I/4

G
I

Chan_e Engine
Clean Air Filter
Inspect Muffler

Clean or Replace Spark Plug

Replace Air Filter Paper Cartridge

SERVICE DATES

ll/

(Power. Propell_dP_owe rs)
C hecPJSharperVReplace Blade

E ! _heck Engine Oil Leve_

_'_/_._O_;kX={:2_/IP=

J_///_

(_
_1,2
I_ 2

Oil

11_2

1 - Cha_je more often when operating under a heavy load o_ in high ambient tereperatu_s.
2 - Service mote often when operating in did'/or dusty conditions.
3 - Replace blades mole often when mowing in sandy soil.
4 * Charge ,_ hours at end of season,

GENERAL

RECOMMENDATIONS

LUBRICATION

The warranty on this lawn mower does
not cover items that have been subjected
to operator abuse or negligence, To
receive full value from the warranty,
operator must maintain mower as
instructed in this manual.
Some adjustments will need to be made
periodically to property maintain your
unit.
All adjustments in the Service and
Adjustments section of this manual
should be checked at least once each
season.
• Once a year, replace the spark plug,
clean or replace air filter element and
check blade for wear. A new spark
plug and clean/new air filter element
assures proper air-fuel mixture and
helps your engine run better and last
longer.
• Follow the maintenance schedule in
this manual.

_ Wheel adjuster

Brake spdng bracket

Rear door hinge
_

Handle bracket mounting pin
Refer to maintenance

"Engine"

section.

Spray lubricant

IMPORTANT:
Do not oil or grease
plastic wheel bearings, viscous lubricants will attract dust and dirt that will
shorten the life of the self-lubricating
bearings, if you feel they must be
lubricated, use only a dry, powdered
graphite type lubricant sparingly.

BEFORE EACH USE
1. Check engine oil level.
2. Check for loose fasteners.
LUBRICATION
Keep unit well lubricated (See "LUBRICATION CHART").

CHART

PRODUCT

SPECIFICATIONS

SERIALNUMBER
DATE OF PURCHASE
_ASOLINE CAPACITY/TYPE:
OILTYPE (API-SF-SJ):

1.5 QUARTS
UNLEADED REGULAR

OIL CAPACITY:

SAE 30 (ABOVE 32°F)
SAE 5W-30 (BELOW 32°F)
20 OZS.

SPARK PLUG (GAP: .030")
BLADE BOLT TORQUE:

CHAMPION RESISTOR TYPE RJ19LM4
35-40 FT. LBS.

The model and serial numbers will be found on a decal attached to the rear of the
lawn mower housing.Record both serial number and date of purchase in space
provided above.
LAWN MOWER

TO REPLACE BLADE

Always observe safety rules when
performing any maintenance.
TIRES
• Keep tiros free of gasoline, oil, or insect
control chemicals which can harm
rubber.
• Avoid stumps, stones, deep ruts, sharp
objects and other hazards that may
cause tire damage.

1. Position the blade adapter on the
engine crankshaft. Be sure key in
adapter and crankshaft keyway are
aligned.
2. Position blade on the blade adapter
aligning the two (2) holes in the blade
with the raised lugs on the adapter.
3. Be sure the trailing edge of blade
(opposite sharp edge) is up toward
the engine.
4. Install the blade bolt with the lock
washer and hardened washer into
blade adapter and crankshaft.
5. Use block of wood between blade and
lawn mower housing and tighten the
blade bolt, turning clockwise.
• The recommended tightening torque is
35-40 ft. Ibs.
IMPORTANT: Blade bolt is grade 8 heat
treated.
TO SHARPEN BLADE
NOTE: We do not recommend sharpening blade - but if you do, be sure the
blade is balanced.
Care should be taken to keep the blade
balanced. An unbalanced blade will
cause eventual damage to lawn mower
or engine.
• The blade can be sharpened with a file
or on a grinding wheel. Do not attempt
to sharpen while on the mower.
• To check blade balance, drive a nail
into a beam or walt. Leave about one
inch of the straight nail exposed. Place
center hole of blade over the head of
the nail. If blade is balanced, it should
remain in a horizontal position. If either
end of the blade moves downward,
sharpen the heavy end until the blade
is balanced.

BLADE CARE
For best results, mower blade must be
kept sharp. Replace bent or damaged
blades.
TO REMOVE BLADE
1. Disconnect spark plug wire from spark
plug and place wire where it cannot
come in contact with spark plug.
2. Turn lawn mower on its side. Make
sure air filter and carburetor are up.
3. Use a wood block between blade and
mower housing to prevent blade from
turning when removing blade bolt.
NOTE= Protect your hands with gloves
and/or wrap blade with heavy cloth.
4. Remove blade bolt by turning counterclockwise.
5. Remove blade and attaching hardware (bolt, lock washer and hardened
washer).
NOTE: Remove the blade adapter and
check the key inside hub of blade
adapter. The key must be in good condition to work properly. Replace adapter if
damaged.

Blad_a_
.

Key_'!

L°ckwasher n_

Ier Crankshaft

keyway

_.__

ENGINE
LUBRICATION
Use only high quality detergent oil rated
with API service classification SF-SJ.
Select the oil's SAE viscosity grade
according to your expected operating
temperature.

crank
bolt

Hardened
washer

Trailing edge

SAE VISCOSITY

GRADES

Blade
adapter

GRASS CATCHER
• The grass catcher may be hosed with
water, but must be dry when used.
• Check your grass catcher often for
damage or deterioration. Through
normal use it will wear. If catcher
needs replacing, replace only with a
manufacturer approved replacement
catcher. Give the lawn mower model
number when ordering.
DRIVE WHEELS
Check front drive wheels each time
before you mow to be sure they move
freely.
The wheels not turning freely means
trash, grass cuttings, etc. are in the drive
wheel area and must be cleaned to free
drive wheels.
If necessary to clean the drive wheels,
check both front wheels.
1. Remove hubcaps, hairpin cotters and
washers.
2, Remove wheels from wheel adjusters.
3. Remove any trash or grass cuttings
from inside the dust cover, pinion and/
or drive wheel gear teeth.
4. Put wheels back in place.
NOTE: If after cleaning, the drive wheels
do not turn freely, contact a Sears or other
qualified service center.
GEAR CASE
• TO keep your drive system working
properly, the gear case and area
around the ddve should be kept clean
and free of trash build-up. Clean under
the drive cover twice a season.
• The gear case is filled with lubricant to
the proper level at the factory. The only
time the lubricant needs attention is if
service has been performed on the
gear case.
• If lubricant is required, use only Texaco
Starple;< Premium 1 Grease, Part No.
750369. Do not substitute.

NOTE: Although multi-viscosity oils
(5W30, lOW30 etc.) improve starting in
cold weather, these multi-viscosity oils
will result in increased oil consumption
when used above 32°F. Check your
engine oil level more frequently to avoid
possible engine damage from running
low on oil.
Change the oil after every 25 hours of
operation or at least once a year if the
lawn mower is not used for 25 hours in
one year.
Check the crankcase oil level before
starting the engine and after each five (5)
hours of continuous use. Tighten oil plug
securely each time you check the oil
level.
TO CHANGE ENGINE OIL
NOTE: Before tipping lawn mower to
drain oil, drain fuel tank by running
engine until fuel tank is empty.
1. Disconnect spark plug wire from spark
plug and place wire where it cannot
come in contact with spark plug.
2. Remove engine oil cap; lay aside on a
clean surface.
3. Tip lawn mower on its side as shown
and drain oil into a suitable container.
Rock lawn mower back and forth to
remove any oil trapped inside of
engine.
4. Wipe off any spilled oil on lawn mower
and on side of engine.
5. Fill engine with oil. (See "Add Oil" in
the Operacion section of this manual.)
6. Reconnect spark plug wire to spark
plug.

AIRFILTER
Yourengine
willnot

SPARK PLUG

run properly and may
be d'amaged by using a dirty air filter.
Replace the air filter every year, more
often if you mow in very dusty, dirty
conditions. Do not wash air filter.
TO CHANGE AIR FILTER
1. Remove the air filter by turning
clockwise to the stop and pull away
from collar.
2. Remove tilter from inside of cover.
3. Clean the inside of the cover and the
collar to remove any dirt accumulation.
4. Insert new filter into cover.
5. Put air filter cover and filter into collar
aligning the tab with the slot.
6. Push in on cover and turn counterclockwise to tighten.
Collar
clockwise
remove
Turn
Slot
Air filter

Turn
counterclockwise
to tighten

MUFFLER
Inspect and replace corroded muffler as it
could create a fire hazard and/or dam-

Change your spark plug each year to
make your engine start easier and run
better. Set spark plug gap at .030 inch.
CLEANING
IMPORTANT: For best performance,
keep mower housing free of built-up
grass and trash. Clean the underside of
_our mower after each use.
CAUTION: Disconnect spark plug wire
from spark plug and piece wire where it
cannot come in contact with the spark
plug.
• Clean the underside of your lawn
mower by scraping to remove build-up
of grass and trash.
• Clean engine often to keep trash from
accumulating. A c_Jged engine runs
hotter and shortens engine life.
• Keep finished surfaces and wheels free
of all gasoline, oil,etc.
• We do not recommend using a garden
hose to clean lawn mower unless the
electrical system, muffler, air filter and
carburetor are covered to keep water
out. Water in engine can result in
shortened engine life.
CLEAN UNDER DRIVE COVER
Clean under drive cover at least twice a
season. Scrape underside of cover with
putty knife or similar tool to remove any
build-up of trash or grass on underside of
drive cover.

age.

_I,CAUTION: Before performing any
service or adjustments:
1. Release control bar and stop engine.
2. Make sure the blade and all moving
parts have completely stopped.
3. Disconnect spark plug wire from spark
plug and place where it cannot come
in contact with plug.
LAWN MOWER
TO ADJUST CUTTING HEIGHT
See "TO ADJUST CUTTING HEIGHT" in
the Operation section of this manual.
REAR DEFLECTOR
The rear deflector, attached between the
rear wheels of your mower, is provided to
minimize the possibility that objects will
be thrown out of the rear of the mower
into the operator mowing position, If the
deflector becomes damaged, it should be
replaced.

TO REMOVE/REPLACE DRIVE BELT
1. Remove drive cover. Remove belt
from gearcase pulley by pushing
down on pulley and rolling belt off it.
2. Turn lawn mower on its side with air
filter and carburetor up.
3. Remove blade.
4. Remove debris shield.
5. Remove belt from engine pulley on
crankshaft.
6. Install new belt by reversing above
steps.
7. Always use factory approved belt to
assure fit and long life.
O_ve
cover

Belt
Push
down

TOADJUST
HANDLE
Theupperhandle
may be

adjusted to
four _4) different height positions.
1, Loosen both handle knobs only
enough to allow the upper handle to
pivot to the desired adjustment
position.
2. Tighten both handle knobs securely.

Catcher

Handle Knob

TO ASSEMBLE

GRASS CATCHER

1. Put grass catcher frame into grass bag
with rigid part of bag on the bottom,
Make sure the frame handle is outside
of the bag top.
2. Slip vinyl bindings over frame.
NOTE: If vinyl bindings are too stiff, hold
them in warm water for a few minutes, If
bag gets wet, let it dry before using.
_,CAUTION:
Do not run your lawn mower
without clipping deflector or approved
grass catcher in place. Never attempt to
operate the lawn mower with the rear
door removed or propped open.

Immediately prepare your lawn mower for
storage at the end of the season or if the
unit will not be used for 30 days or more.

Frame
opening

ENGINE
ENGINE SPEED
Your engine speed has been factory set.
Do not attempt to increase engine speed
or it may result in personal injury, if you
believe that the engine is running too fast
or too slow, take your lawn mower to a
Sears or other qualified service center for
repair and adjustment.
CARBURETOR
Your carburetor has a non-adjustable
fixed main jet for mixture control. If your
engine does not operate pmpedy due to
suspected carburetor problems, take your
lawn mower to a Sears or other qualified
service center for repair and/or adjustment.
IMPORTANT= Never tamper with the
engine governor, which is factory set for
proper engine speed. Overspeeding the
engine above the factory high speed
setting can be dangerous. If you think the
engine-govemed
high speed needs
adjusting, contact a Sears or other
qualified service center, which has
proper equipment and experience to
make any necessary adjustments.

4. Touch up all rusted or chipped paint
surfaces; sand lightly before painting.
HANDLE
You can fold your lawn mower handle for
storage.
1. Squeeze the bottom ends of the lower
handle toward each other until the
lower handle clears the handle
bracket, then move handle forward.
2. Loosen upper handle mounting bolts
enough to allow upper handle to be
folded back.
IMPORTANT: When folding the handle
for storage or transportation, be sure to
fold the handle as shown or you may
damage the control cables,

LAWN MOWER
When lawn mower is to be stored for a
period of time, clean it thoroughly, remove
all dirt, grease, leaves, etc. Store in a
clean, dry area.
1. Clean entire lawn mower (See
"CLEANING" in the Maintenance
section of this manual).
2. Lubricate as shown in the Maintenance section of this manual.
3. Be sure that all nuts, bolts, screws,
and pins are securely fastened.
Inspect moving parts for damage,
breakage and wear. Replace if
14
necessary,

• When setting up your handle from the
storage position, the tower handle will
automatically lock into the mowing
position.

bracket

o_er
Operator presence
Cu°;tpre°rl
_aa_d.e'_"_,
Fold forwardfor _

,troage

, ;/,_"_"_;,)
_

_-" _"-"---_-_:'_'._'_'__
/?
,_--Q.'_"'_
L',,/_
_.,._

"_;_,

///'_

Fold
'backward
Mowing

Lower handle
ENGINE
FUEL SYSTEM
IMPORTANT: It is important to prevent
gum deposits from forming in essentia_
fuel system parts such as carburetor, fuel
filter, fuel hose, or tank during storage.
Also, experience indicates that alcohol
blended fuels (called gasohol or using
ethanol or methanol) can attract moisture
which leads to separation and formation
of acids during storage. Acidic gas can
damage the fuel system of an engine
while in storage.
1. Drain the fuel tank.
2. Start the engine and let it run until the
fuel lines and carburetor are empty.

• Never use engine or carburetor cleaner
products in the fuel tank or permanent
damage may occur.
• Use fresh fuel next season.
NOTE: Fuel stabilizer is an acceptable
alternative in minimizing the formation of
fuel gum deposits during storage. Add
stabilizer to gasoline in fuel tank or
storage container. Always follow the mix
ratio found on stabilizer container. Run
engine at least 10 minutes after adding
stabilizer to allow the stabilizer to reach
the carburetor. Do not drain the gas tank
and carburetor if using fuel stabilizer.
ENGINEOIL
Drain oil (with engine warm) and replace
with clean engine oil. (See "ENGINE" in
the Maintenance section of this manual).
CYLINDER
1. Remove spark plug.
2. Pour one ounce (29 ml) of oil through
spark plug hole into cylinder.
3. Pull starter handle slowly a few times
to distribute oil.
4. Replace with new spark plug.
OTHER
• Do not store gasoline from one season
to another.
• Replace your gasoline can if your can
starts to rust. Rust and/or dirt in your
gasoline will cause problems.
• if possible, store your unit indoors and
cover it to give protection from dust and
dirt.
• Cover your unit with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot
breathe which allows condensation to
form and will cause your unit to rust.
IMPORTANT: Never cover mower while
engone and exhaust areas are still warm.
A CAUTION:Never store the lawn mower
with gasoline in the tank inside a building
where fumes may reach an open flame or
spark. Allow the engine to cool before
storing in any enclosure.

TROUBLESHOOTING
CHART
PROBLEM
CAUSE
Doesnotstart 1. Dirtyair filter.

CORRECTION

2. Out offuel
3. Stale fuel.

4. Water in fuel.
5. Spark plug wire is
disconnected.
6. Sad spark plug.
7. Loose blade or broken
blade adapter.
8. Control bar in released
position.
9. Control bar defective.
Loss of power

1. Rear of lawn mower
housing or cutting blade
dragging in heavy grass.
2. Cutting too much grass.
3. Dirty air filter.
4. Buildup of grass, leaves,
and trash under mower.
5. Too much oil in engine.
6. Walking speed too fast.

Poorcutuneven

1. Worn, bent or loose blade.
2. Wheel heights

uneven.

3. Buildup of grass, leaves
and trash under mower.
Excessive
vibration

1. Worn, bent or loose blade.
2. Bent engine crankshaft.

Starter rope hard
kopull

1. Engine flywheel brake is on
when control bar is released.
2. Bent engine crankshaft.
3. Blade adapter broken.
4. Blade dragging in grass.

Loss of drive

1. Drive wheels not turning
with drive control engaged.
2. Belt not driving

1. Clean/replace air filter.
2. Fill fuel tank.
3. Drain tank and refill with
fresh clean fuel.
4, Drain fuel tank and
carburetor and refill tank
with fresh gasoline.
5. Connect wire to plug.
6. Replace spark plug.
7. Tighten blade bolt or
replace blade adapter.
8. Depress control bar to
handle.
9. Replace control bar.
1. Set to "Higher Cut"
position.
2. Set to "Higher Cut"
position.
3. Clean/replace air filter.
4. Clean underside of mower
housing.
5. Check oil level.
6. Cut at slower walking
speed.
1. Replace blade. Tighten
blade bolt.
2. Set all wheels at same
height
3. Clean underside of
mower housing.
1. Replace blade. Tighten
blade bolt.
2, Contact a Sears or other
qualified service center.

1. Depresscontrol bar to
upper handle before
pullingstarter rope.
2. Contacta Sears or other
qualifiedservice center.
3. Replace blade adapter.
4. Move lawn mowerto cut
grass or to hardsurface.
1. Adjust or replace drive
control cable.
2. Put belt on pulleys or
replace belts if broken,

TROUBLESHOOTING CHART
PR,,OBLEM

CAUSE

CORRECTION

Grass catcher
notfilling(if so
equipped)

1. Cuttingheighttoo low,
2, Lifton blade worn off,
3, Catcher not ventingair,

1, Raise cuttingheight,
2, Replace blade.
3, Clean grass catcher,

Hardtopush

1. Grass is too high or wheel
height is too low.
2. Rear of lawn mower
housing or blade dragging
in grass.
3. Grass catcher too full.
4. Handle height position not
right for you.

1. Raise cuttingheight.

2. Raise rear of fawn mower
housing one (1) setting
higher.
3. Empty grass catcher.
4. Adjust handle height to
suit.

ROTARY LAWN MOWER -- MODEL NO. 917.378420
GEAR CASE ASSEMBLY PART NUMBER

175258

I
1

_EY PART
_O. NO,
DESCRIPTION
17490416
TappingScrew 1/4-20 x 1-1/4
175248X004 EngagementBracket
137053
57072
48373

77881
137051
175257
57079
131484

Shifter
Seal
Gear Case Halves Kit (includes
Key Nos. 4, and 7)
Beadng
WormShaft
Drive Shaft
HardenedWasher
Clutch Yoke

KEY
NO.

PART
NO,

DESCRIPTION

12
13
14
15
16
17
18
19

700343
86447
137050
750436X
750369
12000003
850848
81585X004

Bushing
Rug
Helical Gear
Clutch Jaw
Grease
E-Ring
Hi-Pro Key
Spring Bracket

NOTE: All component dimensions
1 inch = 25.4 mm

given in U,S, inches.

ROTARY
LAWNMOWER
MODELNUMBER
917.378420

35
78

13
_J8

46
4S

HO I AH Y LAWN MOWER MODEL NUMBER 917.378420

KEY PART
NO. NO.
1
2
3
4
5
6
7
8
9
t0
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33

175391X479
175245X479
169780
156577
171407
136376
51793
66426
175794
128415
175069X479
175070X479
17060410
175576X479
175577X479
175243
175244
63601
153638
175573
88652
85543
87677
.....
150406
83923
177320
16_828
57143
175574X004
161961
175_53X004
63124

DESCRIPTION
Upper Hanole
Lower Handle
ControlBar
Engine Zone ConVol Cable
Handte Bolt
Handle Knob
Hakgin Cotter
Wire Tie
Rear Door Kit (IncL Key #16 & 17)
Pop Rivet
Support Bracket LH
Support Bracket RH
Screw 14-20 x 5/8
Handle Bracket Assembly (Left)
Handle Bracket Assembly (Right)
SpdngLH
Spdng RH
Kops Locknut 1/4-20
RopeGuide
Rear Skirl
Hinge Screw 1/4-20 x 1-1/4
Engine Pulley
Hi-Pro Key #505
Engine_C raltsman-Model NO.143.016708
Hex Head Thread Rolling Stew 5/8-16 x I-1/8
Hex Range Nut
Wheel
Shoulder Bolt 5/16-18 x .33
WaveWasher
Axle Arm Assembly RR
Selector Knob
SelectorSpdng
'
Nut5/16-18

KEY PART
NO. NO.

DESCRIPTION

34
175575X004 Axle Ann Assembly LR
35
177"321
Hubcap
36
165912
Bolt
37
150078
Thread Cutting Screw w/Seres 5/16-18 x 3/4
38
61537
Washer
43
175063
Sottom Beg Cover
44
176289
Lawn Mower Housing (Incl. Key #10, 11, 12& 45)
45
85463
Danger Deal
46
851514
Blade Adepter
47
175064
Blade 21"
48
851074
Hardened Washer
49
85_L:_3
Hellcat Washer 3/8-24 x 1-3/8 Gr. 8
50
851(384
Hex Head Machine Screw 3/8-24 x 1-3/8 Gr. 8
78
170954
Handle Adjuster, Outside, LH
79
170953
Handle Adjuster, Inside, LH
80
170554
Handle Adjuster Spnng
81
170955
Handle Adjuster, Inside, RH
82
170956
Handte Adjuster, Outside, RH
-161058
Warning Decal (Not Shown)
-176287
Owner's Manual (EnglisWSpanish)
Available accessories not included with lawn mower:
-D198 33314 ClippingDeflector
-71 33623
Gas Can
-71 33500
Fuel Stabilzer
-71 33300
SAE 30W Oil (20 oz.)

ROTARY LAWN MOWER MODEL NUMBER 917.378420

11
/

_15

13
12

ROTARY LAWN MOWER MODEL NUMBER 917.378420

KEY
NO, NO.
1
3
4
5
6
8
9
11
t2
13
14
15
16
18
26

145755
751152
158755
175436
150495
175012
145212
15O34O
12OOO058
137(To4
8808O
88118
67725
701G37
175235

DESCRIPTION
Control Cable Assembly
Locknut #10-24
Hex Washer Head Screw 1/4.20 x 2.12
V-Be_
Spring Retainer
Hubcap
Locknut
Wheel & ]3re Assembly
E-Ring
Pinion
Dust Cover
Felt Washer
Washer 1/2 x 1-1/2 x .134
Selector Knob
Pan Head Tapping Screw #10-24 x 2-3/4

KEY
NO.

pART
NO.

28
31
35
35
36
37
38
40
41
54
55
57

175065
132010
137(_2.
151521
175258
137(]90
636O1
75192
151520
175084
175739
175(;58

DESCPJPnON
DriveCover
Hex Flange Nut
Drive PuJley
Wheel Adjuster Assembly (Left)
Gear Case Assembly
Spnng
Locknut I/4-20

sp.ng
Wheel Adjuster Assembly (Right)
Grassbag Assembly
Driveshaft Cover
Fra_e

CRAFTSMAN

MODEL

4-CYCLE ENGINE

,390

400

130

_
120
119
125

174

309A
311_

1821_

370C

238

250

NO. 143.016708

MODEL NO. 143.016708

_RAFTSMAN 4-CYCLE ENGINE
_EY
I0.

PART
NO.

2
2A

37465
26727
33734
36557
36775
36558

2B
4
5
6
7
8

36694
28277
30589
34839A
31335
651018

9
_0
l0
tO
1

36281
32600
37464
40027
40042

;2
3
5

40006
20381
36777

.6
8
0

32610A
27241
37460

2
;9
0

29914
37609
37608

2
3
5
0
1
2

37615
28833
27897
30574A
30590A
30591

3
6
9
0
2
3
00
01
03

30588A
650488
611004
611112
650815
650816
34443C
610118
651007

04
10
19
20
25

37480
37047
36787
36825
36780

37288

26
30
35

37289
6021A
37598

50
51
51A
69

31672
31673
40017
36783

;

DESCRIPTION
Cylinder Incl. 2 & 20)
Dowe Pn
Breather Element
Breather Ass'y. (Incl. 6 & 12A)
Breather Tube
Breather Cover & Tube (Incl.
12B)
Breather Tube Elbow
Washer
Governor Rod (Incl. 14)
Governor Lever
Governor Lever Clamp
Screw, Torx T-15, 8-32 x 19/
64"
Extension Spring
Oil Seal
Crankshaft
Piston, Pin & Ring Set (Std.)
Piston & Pin Ass'y. (Std.)
(Incl. 43)
Ring Set (Std.)
Piston Pin Retaining Ring
Connecting Rod Ass'y. (Incl.
46)
Connecting Rod Bolt
Valve Lifter
Camshaft Exhaust(MCR)(Inc.
ref 104)
Oil Pump Ass'y.
* Mounting Flange Gasket
Mounting Flange (Incl. 72
thru 83)
Oil Drain Plug (Incl. 73)
Drain Plug Gasket
Oil Seal
Governor Shaft
Washer
Governor Gear Ass'y. (IncL
81)
Governor Spool
Screw, 1/4-20 x 1-1/4"
Flywheel Key
Flywheel
Belleville Washer
Flywheel Nut
Solid State Ignition
Spark Plug Cover
Screw, Torx T-15, 10-24 x 15/
16"
Cam Bushing
Ground Wire
• Cylinder Head Gasket
Cylinder Head
Exhaust Valve (1/32" OS)
(Incl. 151)
Exhaust Valve (Std.) _lncl.
151)
Intake Valve (Std.) (Incl. 151)
Screw, 5/16-18 x 1-1/2"
Resistor Spark Plug
(RJ19LM4)
Valve Spring
Valve Spring Cap
Intake Valve Seal
* Valve Cover Gasket

KEY
NO.

PART
NO.

172
174
178
182
184

36784
30200
29752
6201
26756

185
186
189
191
195
267
216
223
224
238
239
241
245
250
260
261
262
263A
275
277
285
287
290
292
298
300
301
305
306
307
309
309A
310
311A
313
347
355
370A
370C
370R
380
390
400

37466
32653
650839
36559A
610973
34336
33086
650451
36786
650932
34338
36919
36905
37122
36980
30200
650831
37184
37462
650988
35000A
650926
29774
26460
28763
36916
36246
35647
37610
35499
650562
650783
35648
7611
34080
651038
590701
36261
37318
37317
640271
590739
36792B

416

36085

417
900
900

650760
-----750865

DESCRIPTION

*
*

•

Valve Cover
Screw, 10-24 x 9/16"
Nut & Lock Washer, 1/4-28
Screw, 1/4-28 x 7/8"
Carburetor TO Intake Pipe
Gasket
Intake Pipe
Governor Link
Screw, 1/4-20 x 3/8"
S.E. Brake Bracket (Incl. 195)
Terminal
Throttle Link
R.F_M. Adjusting Lever
Screw, 1/4-20 x 1"
Intake Pipe Gasket
Screw, 10-32 x 49/64"
Air Cleaner Gasket
Air Cleaner Collar
Air Cleaner Filter
Air Cleaner Cover
Blower Housing
Screw, 10-24 x 9/16"
Screw, 1/4-20 x 1/2"
Starter Grill
Muffler
Screw, 1/4-20 x 2-5/16"
Starter Cup
Screw, 8-32 x 21/64"
Fuel Line
Fuel Line Clamp
Screw, 10-32 x 35/64"
Fuel Tank (Incl. 292 & 301)
Fuel Cap (Black)
Oil Fill Tube
=O"-Ring
=O"-Ring
Screw, 10-32 x 1/2"
Screw, 10-24 x 3/4" 590568
Dipstick
Hold Down Bracket
Spacer
Screw, 10-32 x 51/64"
Starter Handle
Lubrication Decal
Pdmer Decal (3 X)
Warning Decal
Carburetor (IncL 184)
Rewind Starter
Gasket Set (Incl. Items
Marked*)
Spark Arrestor Kit (Incl.
417)(Optional)
Screw, 8-32 x 3/8" (Optional)
Replacement Engine NONE
Replacement S/B Order from
71-999
RPM High 2900 to 3200

NOTE: This engine could have been built with
590702 starter.
NOTE: All component dimensions given in U.S.
inches 1 inch = 25.4mm

CRAFTSMAN

MODEL NO. 143.016708

4-CYCLE ENGINE

?--37

KEY
NO.

PART
NO.

DESCRIPTION

---1
2
4
5
6
7
16
17
18
20
2OA
25
27
28
29
30
31
35
36
36A
37
40
44
47
48
60

840271
31615
31767
631184
631183
640070
650506
631607
651025
630766
640027
640200
631867
631024
632019
631028
631021
631022
640259
640080
632766
632547
640030
27110A
630748
631 O27
632760B

Carburetor (IncL 184 of Engine Parts List)
Throttle Shaft & Lever Assembly
Throttle Return Spring
Oust Seal Washer
Dust Seal (Throttle)
Throttle Shutter
Shutter Screw
Fuel Fitting
Throttle Crack Screw/Idle Speed Screw
Tension Spring
Idle Restrictor Screw
Idle Restdctor Scrwe Cap (Black)
Float Bowl
Float Shaft
Float
Float Bowl "O" Ring
Inlet Needle, Seat, & Clip (IncL 31)
Spring Clip
Primer Bulb/Retainer Ring
Main Nozzle Tube
Carburetor Tube
"O" Ring. Main Nozzle Tube
High Speed Bowl Nut
Bowl Nut Washer
Welch Plug, Idle Mixture Well
Welch Plu , Atmospheric Vent
Repair kit _ncl. Items Marked * in Notes)

*
*
*

*
"
*

*
*
*
•

;RAFTSMAN 4-CYCLE ENGINE

MODEL NO. 143,016708

_'tl

KEY
NO,

PART
NO.

1
2
3
4
5
6
7
8
11

590702
590599A
590600
590696
590601
590697
590698
590699
590700
590703

590535

590701

Recoil Starter
Spring Pin (Incl. 4)
Washer
Retainer
Washer
Brake Spring
Starter Dog
Dog Spring
Pufley & Rewind Spring Ass y
Starter Housing Ass'y. (40
degree grommet)
Starter Rope ( 98" X 9/64"
dia.)
Starter Handle

KEY
NO.

PART
NO,

DESCRIPTION

---3
6
7
8
11

590739
590740
590616
590617
590618A
590638

590535

13
14

590701
590760

DESCRIPTION

el5

O--2

Rewind Starter
Retainer
Starter Dog
Dog Spdng
Pulley & Rewind Spring Ass y
Starter Housing Ass'y (40
degree grommet
Starter Rope(Length 98" x 9/
64" dia.)
Starter Handle
Spring Clip

•

i!i

•

Get it fixed, at your home or ours!
For repair of major brand appliances in your own home...
no matter who made it, no matter who sold it!

1-800-4-MY-HOME

sM Anytime,day or night

(1-800-469-4663)
www.sears.com

To bring in products such as vacuums,
lawn equipment and electronics for repair, call for
the location of your nearest Sears Parts & Repair Center.

1-800-488-1222

Anytime, day or night

www.sears.com

For the replacement parts, accessories and owner's manuals
that you need to do-it-yourself, call Sears PartsDirectSM!

1-800-366-PART

sa.r..-1_p.m.CST,

(1-800-366-7278)

7 days a week

www.sears.con_/par
tsdlrect
To purchase or inquire about a Sears Service Agreement:

1-800-827-6655
7 a.m.- 5 p.m.CST,Mon.- Sat.
Para pedir serviciode reparaci6n a domicilio,
y para ordenar piezas
ntrega a dornicilio:

Seam,

Roebuck

and_b_

176287 1.2.01TR

® R__
-_,_Marea Regis_rad_/

Au Canada pour service en franqais:
1-877-LE-FOYER
_
(1-877-533-6937)

"_de
t_u_l_ars,
Marca _-4_dca
U

Roebuck and Co.
Sears, Roebuck and Co,

Printed in U.S.A

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 27
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Tue Aug 14 10:52:25 2007
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

Craftsman 917378420 User Manual Gas, Walk Behind Lawnmower Manuals And Guides L0103070

CRAFTSMAN Walk Behind Lawnmower, Gas Manual L0103070 CRAFTSMAN Walk Behind Lawnmower, Gas Owner's Manual, CRAFTSMAN Walk Behind Lawnmower, Gas installation guides

Navigation menu

Versions of this User Manual:

Views

Navigation