Craftsman 973111350 User Manual CORDLESS DRILL DRIVER Manuals And Guides L0208048
CRAFTSMAN Drill Driver Manual L0208048 CRAFTSMAN Drill Driver Owner's Manual, CRAFTSMAN Drill Driver installation guides
User Manual: Craftsman 973111350 973111350 CRAFTSMAN CORDLESS DRILL-DRIVER - Manuals and Guides View the owners manual for your CRAFTSMAN CORDLESS DRILL-DRIVER #973111350. Home:Tool Parts:Craftsman Parts:Craftsman CORDLESS DRILL-DRIVER Manual
Open the PDF directly: View PDF .
Page Count: 16
Download | ![]() |
Open PDF In Browser | View PDF |
Owner's ,Manual ICRAFTSMAN I 3/8 in., 14.4,VOLTS CORDLESS Variable Speed / Reversible DRILL-DRIVER Model No. 973.111350 Save this manual for future reference _1_CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA visit the Craftsman web page: www.sears.com/craftsman 9720OO-923 8-01 • Safety • Features • Operation • Maintenance • Parts List TABLE OF CONTENTS • General Safety Rules ................................................................................................................................................. 2-3 • Specific SafetyRules/Symbols .................................................................................................................................. 3-5 • Features ......................................................................................................................................................................... 6 • Operation ............................................................................................................................... • Maintenance ................................................................................................................................................................. 12 • Battery Removal ........................................................................................................................................................... 12 • Accessories ............. 13 m Warranty ....................................................................................................................................................................... 13 • Exploded View And Repair Parts List .......................................................................................................................... 15 • Parts Ordering / Service ....................... :....................................................................................................................... 16 _k _. ...................................................... Personal WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE _.................................................................................. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. • Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. • Avoid accidental starting. Be sure switch is in the locked or off position before inserting battery pack. Carrying tools with your finger on the switch or inserting the battery pack into a tool with the switch on, invites accidents. • Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury. • De net overreach. Keep proper footing and balance at all times, Proper footing and balance enables better control of the tool in unexpected situations. Do not use on a ladder or unstable support. • Use safety equipment. Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. Work Area Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. • Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Electrical Safety Do not abuse the cord. Never use the cord to carry the charger. Keep cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately. Damaged cords may create a fire. A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery. Use battery only with charger listed. MODEL BATTERY PACK CHARGER 973.111350 Item No. 9-11013 (981480-001) Item No. _-11012 (981481-001) Use battery operated tool only with specifically designated battery pack. Use of any other batteries may create a risk of fire. Use only with battery pack listed. 2 Safety • INSTRUCTIONS • 7-11 Tool Use and Care • • • Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges are less likely to bind and are easier to control. Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. • Check for misalignment or binding of moving _parts, breakage of parts, and any other condition that may affec_ the tool's operation. If damaged, have the tool serviced before using. Many accidents a_e caused by:poorly maintained tools. • Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool, may create a risk of injury when used on another tool. Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for whicl_it is designed. Do not use tool if switch does not turn it on or off. A tool that cannot he controlle_ with the switch is dangerous and must be repaired. • • Disconnect battery pack from tool or place the switch in the locked or off position before making any adjustments, changing accessories, or storing the tool. Such preventive safety mepsures reduce risk of starting the tool accidentally. Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. Service Tool service must be performed only by qualified repair personnel. Service or; maintenance performed by unqualified personnel could result in a risk of injury. When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury. When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or a fire. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator. Additional fire or heat. They may explode. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. Rules For Safe Operation Know your power tool. Read operator's manual carefully. Learn its applications and limitations, as well as the specific potential hazards related to this tool. Following this rule will reduce the risk of electric shock, fire, or serious injury. ,_ Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. A wire gage size (A.W.G.) of at least 16 is recommended for an extension cord 100 feet or less in length. A cord exceeding 100 feet is not recommended. If in doubt, use the nextheavier gage. The smaller the gage number, the heavier the cord. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Important • Do not charge battery tool in a damp or wet location. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. • For best results, your battery tool should be charged in a location where the temperature is more than 50°F but less than 100°F. Do not store outside or in vehicles. • Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water, then neutralize with lemon juice or vinegar. If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention. Following this rule will reduce the risk of serious personal injury. Rules for Battery Tools • Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery tool or when changing accessories. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. • Do not place battery tools or their batteries near 3 WARNING: Batteries vent hydrogen gas and can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious injury, never use any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately. _1, Important • Safety Instructions Save these instructions. This manual contains important safety and operating instructions for charger item num bor 9-11012 (981481-001 ). Following this rule will reduce'the risk of electric shock, fire, or serious personal injury Before using battery charger, read all instructions and cautionary markings in this manual, on battery charger, and product using battery charger. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. • TO reduce risk of injury, charge only nickelcadmium and nickel metal hydride type rechargeable batteries. Other types of batteries may burst causing personal injury and damage. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. • Do not expose charger to rain or snow. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. Use of an attachment not recommended or sold • To reduce risk of damage to charger body and cord, pull by charger plug rather than cord when disconnecting charger. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. Make sure cord is located so that it will not be • stepped on, tripped over, or otherwise subjected to damage or stress. Following this rule will reduce the risk of serious personal injury. An extension cord should not be used unless DO not disassemble charger; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. • To reduce the risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. Turning off controls will not reduce this risk. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. • Do not use charger outdoors. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. _I, WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • lead from lead-based a. That pins on plug o! extension cord are the same number, Size and shape as those of plug on charger. • arsenic and chromium from chemicallytreated lumber. c. That wire size is large enough for AC ampere rating of charger as specified below: Cord Length (Feet) 25' 50' 100' Cord Size (AWG) 16 16 paints, • crystalline silica from bricks and cement and other masonry products, and b. That extension cord is properly wired and in good electrical condition; and Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. Note: AWG = American Wire Gage • • A_. DANGER: RISK OF ELECTRIC SHOCK. DO NOT TOUCH UNINSULATED PORTION OF OUTPUT CONNECTOR OR UNINSULATED BATTERY TERMINAL. absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure: 16 Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it'to a qualified serviceman. Following this rule will reduce the risk of electric shock, fire, or serious eersonal injury. Disconnect charger from power supply when not in use. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. • • For Charger • • qualified serviceman. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. WARNING: A damaged battery is subject to explosion. To avoid serious personal injury, properly dispose of a damaged battery. Do not operate charger with a damaged cord or plug. If damaged, have replaced immediately by a 4 SYMBOLS SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) min Minutes T_me "%, Alternating Current Type or a characteristic of current --= Direct Current Type or a characteristic of current no No Load Speed ' Rotational speed, at no load .../rain Revolutions or Reciprocation ,_ Safety Alert Symbol Per Minute Revolutions, strokes, surface speed, orbits etc. per minute Indicates danger, warning or caution. It means attention!!! Your safety is involved. The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures. SYMBOL MEANING A ,a, A SAFETY ,a, CAUTION: Failure to obey a safety warning may result in property damage or personal injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. NOTE: ALERT SYMBOL: Indicates danger, warning, or caution. May be used in conjunction with other symbols or pictographs. DANGER: Failure to obey a safety warning will result in serious injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. WARNING: Failure to obey a safety warning can result in serious injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. Advises you of information or instructions vital to the operation or maintenance of the equipment. SAVE THESE INSTRUCTIONS KNOW YOUR DRILL-DRIVER SPECIFICATIONS: See Figure 1. Chuck Capacity Motor Before attempting to use any tool, familiarize yourself with all operating features and safety requirements. WRIST Charger Rating STRAP No Load Speed A wrist strap is provided to reduce the chances of dropping your drill-driver. Plac_one hand through the wrist strap when carrying tool. Switch Charge Rate Maximum Torque 3/8 in. 14.4 Volt DC 120 Volts, 60 Hz, AC Only 0 - 6OO RPM Variable Speed - Reversible 10 -12 Hours 100 in. Ibs. TORQUE ADJUSTMENTRING _ SCREWDRIVERBITS KEYLESSCHUCK BATrERY PACK FORWARD BATTERY CHARGER REVERSE SELECTOR SWITCH TRIGGER SIT CHARGING STAND RED LIGHT BATTERYPACK SHOWNINTOOL WRISTSTRAP Fig. 1 ,_ WARNING: If any parts are missing, do not operate tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury. ,_ WARNING: The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields, available at Sears Retail Stores. Always wear eye protection which is marked to comply with ANSI Z87.1. 6 _i _i, WARNING" Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. WARNING: Do not allow familiarity with your drilldriver to make you careless. Remember that a careless fraction of a ,s_l_ond _Ssufficient to inflict severe injury. CHARGING BATTERY PACK The battery pack for this tool has been shipp.ed in a low charge condition to prevent possible problems. Therefore, you should charge it overnight prior to use. Note: Batteries will not reach full charg_ the first time they are charged. Allow several cycles (drilling followed by recharging) for them to become fully charged. TO CHARGE • Charge battery pack only with the charger and charging stand provided. • Make sure power supply is normal household voltage, 120 volts, 60 Hz, AC only. • Connect charger to power supply. • Place battery pack in charging stand. Align raised rib on battery pack with groove in charging stand. See Figure 1. • Press down on battery pack to be sure contacts on battery pack engage properly with contacts in charging stand. • When properly connected, the red light on charging stand will turn on. • Note: If charger does not charge battery pack, return battery pack, charger and charging stand to your nearest Sears Repair Center for electrical check. • • After normal usage, a minimumof 10 hours is required to recharge a completely discharged tool. The battery pack will become slightly warm to the touch while charging. This is normal and does not indicate a problem. • Do not place charger in an area of extreme heat or cold. It will work best at normal room temperature. • When batteries become fully charged, unplug charger from power supply. IMPORTANTINFORMATIONFOR HOT BATTERIES RECHARGING When using your drill-driver continuously, the batteries in your battery pack will become hot. You should let a hot battery pack co_)l Gown for approximately 30 minutes before attempting to recharge. Note: This situation only occurs when continuous use of your Grill causes the batteries to become hot. It does not occur under normal circumstances. Refer to "CHARGING BATTERY PACK" for normal recharging of batteries. If the charger does not charge your battery pack under normal circumstances, return both the battery pack and charger to your nearest Sears repair center for electrical check. SWITCH See Figure 2. To turn your drill ON, depress the switch trigger. To turn it OFF, release the switch trigger. FORWARD/REVERSE SELECTOR CENTERPOSITION (LOCK) SWITCH TRIGGER VARIABLE Fig. 2 SPEED This tool has a variable speed switch that delivers higher speed and torque with increased trigger pressure. Speed is controlled by the amount of switch trigger depression. Note: You might hear a whistling or ringing noise from the switch during use. Do not be concerned, this is a normal part of the switch function. SWITCH LOCK See Figure 2. The switch trigger can be locked in the OFF position. This feature can be used to prevent the possibility of accidental starting when not in use. To lock switch trigger, place the direction of rotation selector in center position. WARNING: Battery tools are always in operating condition. Therefore, switch should always be locked when not in use or carrying at your side. REVERSIBLE See Figure 3. This tool has the feature of being reversible. The direction of rotation is controlled by a selector located above the switch trigger. With the drill held in normal operating position, the direction of rotation selector should be positioned to the left of the switch for drilling. The drilling direction is reversed when'jhe selector is to the right of the switch. When the selector is in center position, the switch trigger is locked. BATTERYPACK CENTERPOSITION (LOCK) LATCHES \ f DEPRESSLATCHESTO RELEASEBATTERYPACK SELECTOR • FORWARD Fig, 3 ,_ CAUTION: To prevent gear damage, always allow chuck to come to a complete stop before changing the direction of rotation. ,_k To stop, release switch trigger and allow the chuck to come to a complete stop. TO INSTALL BATTERY Fig. 4 Make sure the latches on each side of your battery pack snap into place and battery pack is secured in drill before beginning operation. CAUTION: When placing battery pack in your drill, be sure raised rib inside drill aligns with groove on battery pack and latches snap in place properly. Improper assembly of battery pack can cause damage to internal components. PACK TO REMOVE See Figure 4. BA'R'ERY PACK • Lock switch trigger on your drill by placing the direction of rotation selector in center position. See Figure 2. • Lock switch trigger on your drill by placing the direction of rotation selector in center position. See Figure 2. • Place battery pack in your drill. Align raised rib inside drill with groove on battery pack. See Figure 4. • Locate latches on end of battery pack and depress to release battery pack from your drill. See Figure 4. • Remove battery pack from your drill. 8 KEYLESS CHUCK _ INSTALLING BITS See Figure 5. See Figure 7. Your drill has a keyless chuck. As the name implies, you can hand tighten or release drill bits in the chuck jaws. Grasp and hold the collar of the chuck with one hand. Rotate the chuck body with your other hand. The arrows on the chuck indicate which direction to rotate the chuck body in order to LOCK (tighten) or UNLOCK (releas_the drill bit. • Lock switch trigger on your drill by placing the direction of rotation selector in center position. See Figure 2. • -Open or close chuck jaws to a point where the opening is slightly larger than the bit size you intend to use. Also, raise the front of your drill slightly to keep the bit from falling ou! of the chuck jaws. DRILLBIT UNLOCK (RELEASE) CHUCK BODY • Insert drill bit straight into chuck the full length of the jaws as shown in figure 7. • Tighten the chuck jaws on drill bit. DRILLBIT CHUCKBODY CHUCKJAWS LOCK (TIGHTEN) CHUCK JAWS CHUCK COLLAR / CHUCKCOLLAR Fig. 5 ,_ RIGHT WARNING: Do not hold chuck body with one hand and use power of the drill to tighten chuck jaws on drill bits. Chuck body could slip in your hand or your hand could slip and come in contact with rotating drill bit. This could cause an accident resulting in serious personal injury. Fig. 7 To tighten the chuck jaws on drill bit; grasp and hold the collar of the chuck with one hand, while rotating the chuck body with your other hand. Note: Rotate the chuck body in the direction of the arrow marked LOCK to tighten chuck jaws. Do not use a wrench to tighten or loosen the chuck jaws. BIT STORAGE See Figure 6. ,_WARNING: Make sure to insert drill bit straight into chuck jaws. Do not insert drill bit into chuck jaws at an angle and then tighten, as shown in figure 8. This could cause drill bit to be thrown from drill, resulting in possible serious personal injury or damage to the chuck. When not in use, bits provided with your drill can be placed in the storage area located at the bottom of your drill as shown in figure 6. SCREWDRIVER BIT SCREWDRIVER BIT BIT STORAGE AREA Fig. 6 Fig. 8 9 REMOVING BITS DRILLING See Figure 10. See Figure 7. • Lock switch trigger or your drill by placing the direction of rotation selector in center position. See Figure 2. • Loosen the chuck jaws from drill bit. • To loosen: grasp and hold the collar of the chuck with • • one hand, while rotatin_ chuck body with your other hand. Note: Rotate ch_ck body in the direction of the arrow marked UNLOCK to J.oosenchuck jaws. Do not use a wrench to tighten or loosen the chuck jaws. Remove drill bit from chuck jaws. ADJUSTABLE TORQUE CLUTCH See Figure 9. Your drill is equipped with an adjustable torque clutch for driving different types of screws into different materials. The proper setting depends on the type of material and the size of screw you are using. TO ADJUST • • TORQUE Identify the twenty four torque indicator settings located on the front of your drill. See Figure 9. Rotate adjusting ring to the desired setting. • • 1- 4 For driving small screws. 5- 8 For driving screws into soft material. 9 o 12 For driving screws into soft and hard materials. • 13 - 16 For driving screws in hard wood. • 17 - 20 For driving large screws. Fig. 10 When drilling hard smooth surfaces use a center punch to mark desired hole location. This will prevent the drill bit from slipping off center as the hole is started. However, the low speed feature allows starting holes without center punching if desired. To accomplish this, simply operate your drill at a low speed until the hole is started. • 21 - _,11 For heavy drilling. TO DECREASE TORQUE The material to be drilled should be secured in a vise or with clamps to keep it from turning as the drill bit rotates. ADJUSTING RING Hold tool firmly and place the bit at the point to be drilled. Depress the switch trigger to start tool. Move the drill bit into the workpiece applying only enough pressure to keep the bit cutting. Do not force or apply side pressure to elongate a hole. ,_ WARNING: Be prepared for binding or bit breakthrough. When these situations occur, drill has a tendency to grab and kick opposite to the direction of rotation and could cause loss of control when breaking through material. If not prepared, this loss of control can result in possible serious injury. TO INCREASE TORQUE ,_ When drilling metals, use a light oil on the drill bit to keep it from overheating. The oil will prolong the life of the bit and increase the drilling action. Fig. g If the bit jams in workpiece or if the drill stalls, release switch trigger immediately. Remove the bit from the workpiece and determine the reason for jamming. WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. 10 CHUCK REMOVAE Insert hex key in chuck and tighten chuck jaws securely. Tap sharply with a mallet in a counterclockwise direction. This will loosen chuck on the spindle. It can now be unscrewed by hand. See Figure 13. See Figures 11, 12, and 13. The chuck must be removed in order to use some accessories. To remove: • Lock switch trigger or your drill by placing the direction of rotation selector in center position• See Figure 2. • Insert a 5/16 in. or larger _ex key into the chuck of your drill and tighten the chuck jawssecurely. • Tap the hex key sharply with a mallet in a clockwise direction. See Figure 11. This will loosen the screw in the chuck for easy removal• MALLET CHUCK JAWS \ Fig. 13 TO RETIGHTEN A LOOSE CHUCK The chuck may become loose on spindle and develop a wobble• Periodically check chuck screw for tightness. HEX KEY To tighten, follow these steps: Fig. 11 Open chuck jaws and remove hex key. Remove the chuck screw by turning it in a clockwise direction. See Figure 12. Note: The screw has left hand threads. SCREWDRIVER • Lock switch trigger on your drill by placing the direction of rotation selector in center position. See Figure 2. • Open the chuck jaws. • Insert hex key into chuck and tighten chuck jaws securely. Tap hex key sharply with a mallet in a clockwise direction. This will tighten chuck on the spindle. • Open the chuck jaws and remove hex key. • Tighten the chuck screw• Note: The chuck screw has left hand threads• Fig. 12 11 ,_ Only the parts shown on parts list, page 15, are intended to be repaired or replaced by the customer. All other parts should be replaced by a qualified service technician at an authorized service facility. WARNING: When servicing, use only identical Craftsman replacement pads. Use of any other part may create a hazard or cause product damage. Avoid using solvents when cleaning plastic pads. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. _i A we"a?e" c",:3oe::tn3;t e o tt ;.o;S t::,wOr h this tool. Any such alteration or modification is "misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING: Do not a{anytime let brake fluids, gasoline, petroleum-based-products, penetrating oils, etc. come in contact with plastic pads. They contain chemicals that can damage, weaken or destroy plastic. Do not abuse power tools. Abusive practices can damage tool as well as workpiece. BA'R'ERIES Your drill's battery pack is equipped with 12 nickelcadmium rechargeable batteries. Length of service from each charging will depend on the type of work you are doing. The batteries in this tool have been designed to provide max{mum trouble free life. However, like all batteries, they will eventually wear out. Do not disassemble battery pack and attempt to replace the batteries. Handling of these batteries, especially when wearing rings and jewelry, could result in a serious burn. • Store and charge your batteries in a cool area. Temperatures above normal room temperature will shorten battery life. • Never store batteries in a discharged condition. Recharge them immediately after they are discharged. • All batteries gradually lose their charge. The higher the temperature the quicker they lose their charge. If you store your tool for long periods of time without using it, recharge the batteries every month or two. This practice will prolong battery life. To obtain the longest possible battery life, we suggest the following: BATTERY PACK FOR RECYCLING To preserve natural resources, please recycle or dispose of batteries properly. This product contains nickel-cadmium batteries. Local, state or federal laws may prohibit disposal of nickel-cadmium batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options. _i 12 REMOVAL AND PREPARATION WARNING: Upon removal, cover the battery pack's terminals with heavy duty adhesive tape. Do not attempt to destroy or disassemble battery pack or remove any of its components. Nickel-cadmium batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and/or body pads as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury. Thefollowingrecomrnended accessories arecurrentlyavailableat SearsRetailStores. • • • ,_ 6-Pc.ExtraLengthMagnitePowerBitSet 30-Pc.PowerScrewdriver/Nutdriver SetandCase 17-Pc.PowerScrewddver/Nutdriver SetandCase WARNING: • • HighSpeedBits(ForWoodor Metal)...3/4 in. Max. KeylessChuck(ItemNo.9-20988) The use.Of attachments or accessories not listed might be hazardous. WARRANTY FULL ONE YEAR WARRANTY ON CRAFTSMAN 318 in. CORDLESS DRILL-DRIVER If this CRAFTSMAN 3/8 in. Cordless Drill]Driver fails to give complete satisfaction within one year from the date of purchase, RETURN IT TO THE NEARESTtSEARS STORE OR SEARS SERVICE CENTER IN THE UNITED STATES, and Sears will repair it, free of charge. If this CRRFTSMIIN 3/8 in. Cordless Drill-Driver is used for commercial g0 days from the date of purchase. or rental purposes, this warranty applies for only This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co., Dept. 817 WA, Hoffman Estates, IL 60179 13 14 CRAFTSMAN 318 in., 14.4 VOLT CORDLESS DRILL-DRIVER - MODEL NO. 973.111350 number in all correspondence regarding your 3/8 in., 14.4 VOLT CORDLESS DRILL-DRIVER or The number willparts. be found on a plate attached to the motor housing. Always mention the model whenmodel ordering repair SEE BACK PAGE FOR PARTS ORDERING m I I INSTRUCTIONS 2 4 PARTS LIST Key No. Part Number Description 1 616478-003 Screw (Special) ................................................ 1 2 973094-001 Chuck (Item No. 9-20988) ................................ 1 1 3 * Item No. 9-11013 Battery Pack (981480-001) .............................. 4 * Item No. 9-11012 Charger w/Charging Stand (981481-001) ........ 1 5 3051757-01 972000-923 • Quan. Carrying Case - Not Shown ............................ Owner's Manual * Can Be Purchased Through RSOS (Retail Special Order System) 15 1 I Get it fixed, at your home or ours! For repair of major brand appliances in your own home... no matter who made it, no matter who sold it! 1'800-4-MY-HOME sMAnytime, day or night (1-800-469-4663) www.sears.com To bring in produ_s such as vacuums, lawn equipment and electronics for repair, call for the location of your nearest Sears Parts & Repair Center. 1-800-488-1222 Anytime, day or night www.sears.com For the replacement parts, accessories and owner's manuals that you need to do-it-yourself, call Sears PartsDirect SM! 1-800-366,PART (1-800-366-7278) 6 a.m. - 11 p.m. CST, 7 days a week www.sears.com/partsdirect To purchase or inquire about a Sears Service Agreement: 1-800-827-6655 7 a.m. - 5 p.m. CST, Mon.- Para pedir servicio de reparaciSn a domicilio, y para ordenar piezas con entrega a domicilio: 1-888-SU-HOGAR sM Sat. Au Canada pour service (1-877-533-6937) (1-888o784:6427) ( H°meCentrar° S£ARS J1 @ Registered Trademark © Sears, Roebuck and Co / TM Trademark en fran£ais: 1-877-LE-FOYER sM of Sears, Roebuck and Co ® Marca Registrada / T-_ Marca de Fabrica de Sears, Roebuck and Co.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 16 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Tue Aug 14 14:53:02 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools