Craftsman 315 277011 Users Manual
315277011 315277011 CRAFTSMAN 1/4 SHEET PROFESSIONAL SANDER - Manuals and Guides 98100108 View the owners manual for your CRAFTSMAN 1/4 SHEET PROFESSIONAL SANDER #315277011. Home:Tool Parts:Craftsman Parts:Craftsman 1/4 SHEET PROFESSIONAL SANDER Manual
CRAFTSMAN Sander Manual 98100108 CRAFTSMAN Sander Owner's Manual, CRAFTSMAN Sander installation guides
315277011 98a92c5b-f084-4629-abdf-927e70c8ff69 Craftsman Sander 315.277011 User Guide |
2015-01-05
: Craftsman Craftsman-315-277011-Users-Manual-161058 craftsman-315-277011-users-manual-161058 craftsman pdf
Open the PDF directly: View PDF 
.
Page Count: 14
| Download | |
| Open PDF In Browser | View PDF |
Owner's Manual 1/4 SHEET PROFESSIONAL SANDER Double Insulated Model No. 315.277011 Save this manual for future reference • Safety • Features ,4_ CAUTION: Read and follow all Safety Rules and Operating Instructionsbefore first use of this product. • Operation • Maintenance • Parts List Customer Help Line: 1-800-932-3188 Sears Roebuck and Co., Hoffman Estates, IL 60179 Visit the Craftsman web page: www.sears.com/craftsman 972O00-555 8-98 USA ® • Table Of Contents .......................................................................................................................................... 2 • Warranty...._................................................................i...................................................................................2 • Introduction ..................................................................................................................................................... 2 • Rules for Safe Operation ............................................................................................................................. 3-4 • Product Specifications .................................................................................................................................... 5 • Unpacking .......................................................................................................................... • Accessories .................................................................................................................................................... :............................ 5 • Features ......................................................................................................................................................... 6 • Operation ..................................................................................................................................................... • Maintenance... .............................................................................................................................................. • Expiodad View sod Rabair ParfS List ........................................ • PartsOrdadnglService _............................................................. 6-9 10 12-13 ............................................................................................................................... FULL ONE YEAR WARRANTY ON CRAFTSMAN PROFESSIONAL 5 14 SANDER If this CRRFTSMRN Professional Sander fails due to a defect in material or workmanship within one year from the date of purchase, Sears will repair it, free of charge. WARRANTY SERVICE IS AVAILABLE STORE IN THE UNITED STATES. By SIMPLY RETURNING THE TOOL TO 11tE NEAREST SEARS This warranty gives you specific legal dghts, and you may also have other dghts which vary from state to stata. Sears, Roebuck end Co., DepL 817WA, Hoffman Estates, IL 60179 Yoursanderhas many featuresfor makingsanding operationsmorepleasantand enjoyable.Safety, performanceand dependabilityhave beengiventop priorityin the designofthissander makingit easy to maintainandoperate. ÷ _._ ,_= ,_, _, CAUTION: Carefully read through this entire owner's manual before using your new sander. Pay close attention to the Rules for Safe Operation, Warnings and Cautions. If you use your sander properly and only for what it is intended, you will enjoy years of safe, reliable service. Look for this symbol to point out important safety precautions. It means attention!l! Your safety is involved. WARNING: The operation of any sander can result in foreign objects being thrown into your eyes, which can result In severe eye damage. Before beginning power tool operation, always wear safety goggJea or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields, available at Sears Retail Stores. Thepurpose ofsafety symbols Istoattract yourattention to possible dangers. The safety symbols, end the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The Instructions or warnings they give are not substitutes for proper accident prevention measures. SYMBOL & MEANING SAFETY ALERT SYMBOL: Indicates danger, wamlag, or caution. May be used in conjunction with other symbols or pictographs. DANGER: Failure to obey a safety warning will result in serious injury to yourself or to others. Always follow the safely precautioea to reduce the risk of fire, electric shock and personal injury. a, WARNING: Failureto obeya safetywarningcan resultin seriousinjuryto yourselfor toothers. Alwaysfollowthe safelypresautior_to reducethe riskoffire, electricshockandpersonal injury. a, CAUTION: Failure to obey a cafely warning may result in property damage or personal injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire. elactdc shock and personal injury. NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment. DOUBLEINSULA_ON IMPORTANT Ooubla insulation is a concept in safely, in electric power tools, which eliminates the need for the usual three-wire grounded power cord. All exposed metal parts are isolated from internal metal motor components with protecting insulation. Double insulated tools do not need to be grounded. Servicing of a toni with deub;e insulation requires extreme cars and knowladge of the system and should be parformed only by a qua,fled service technician. For san, ice we suggest you return the tool to your nearest Sears Store for repair. Always use original factory replacement parts when servicing, _, READ • l WARNING: Do not attempt to operate this tool until you have read thoroughly and understand completely all instructions, safety rules, etc. contained in this manual. Failure to comply can result In accidents involving fire, elactdc shock, or serious personal Injury, Save owner's manual and review frequently for continuing safe operation, and instructing others who may use this tool. • • • • • GUARD AGAINST ELECTRIGAL SHOCK BY PREVENTING BODY CONTACT WITH GROUNDEDSURFACES. For exsmplo;pipes, radiators,ranges,refrigeratorencisaurse. KEEP WORK AREA CLEAN. Cluttered-,rossend benchesInvitea_Idenla. KEEP CHILDREN AND VISITORS AWAY. All STORE IDLE TOOLS. When not in use, tools should be stored In a dry and high or locked-up place - out of the reach of children. manual carefully. Learn its apptications and limitations as well as the specific potential hazards related to this tool. • Do visitors should wear safety gktsasa and be kept a safe distance from work area. Do not let visitors contact tool or extension cord. KNOW YOUR POWER TOOL. Read owner's KEEP GUARDS IN PLACE AND IN WORKING ORDER. ENVIRONMENT. not use power tools in damp or wet locations or expose to rain. Keep work area well lit. ALL INSTRUCTIONS • AVOID DANGEROUS • 3 DO NOT FORCE TOOL. It willdo the job better andsafer at the rotefor whichit was designed, USE RIGHT TOOL. Don'tforcesmalltoolor attachment to do thejob ofa heavydulytool. Do notuse toolfor purposenotIntondedofor example-don_ uses circularsew for cuttingtree limbsor logs. WEAR PROPER APPAREL, Do notwear loose clothing orJewelrythatcan got caught In tool's movinglmrbnandcause pomonslInjury. Rubber gloves snd rlocakldfootwearare ra_mmondod whenworklngoutdoors.Wear proto_)vohslr RULES FORSAFEOPERATION (Continued) FOR WET SANDING OR LIQUID POLISHING. coveting to contain long hair and keep it from being drawn into nearby air vents. • • Failure to comply can result in electrical shock causing sedous injury or worse. ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses have only impact-resistant lenses; they are not safety glasses. • KEEP HANDS AWAY FROM SANDING AREA. • NEVER USE IN AN EXPLOSIVE PROTECT YOUR LUNGS. Wear a face or dust ATMOSPHERE. Normal sparking of the motor could ignite fumes. mask if the operalton is dusty. • • PROTECT YOUR HEARING. Wear hearing protaction dudng extended periods of operation. • INSPECT TOOL CORDS PERIODICALLY and if damaged, have repaired by authorized service facility. Stay constantly aware of cord location. DO NOT ABUSE CORD. Never carry tool by cord or yank it to disconnect from receptacle. Keep cord from heat, oil, and sharp edges. • • SECURE WORK. Use clamps or a vise to hold work. It is safer than using your hand and it frees both hands to operate tool. • • DO NOT OVERREACH. Keep proper footing and balance at all times. Do not usa on a ladder or unstable support. Secure tools when woddng st elevatad positions. KEEP HANDLES DRY, CLEAN, AND FREE FROM OIL AND GREASE. Always usa a clean cloth when cleaning. Never use brake fluids, gssoline, petroleum-based products, or any strong solvents to clean your tool. • STAY ALERT AND EXERCISE • • PERIODICALLY • TOOLS. When not in use, before REMOVE ADJUSTING KEYS AND WRENCHES, Form habit of checking to see that keys and adjusting wrenches are removed from toot before turning it on. • AVOID ACCIDENTAL STARTING. • Do not carry MAKE SURE YOUR EXTENSION • CORD IS IN OUTDOOR USE EXTENSION PARTS. Before further usa of DO NOT USE TOOL IF SWITCH DOES NOT TURN IT ON AND OFF. Have defective switches INSPECT FOR and remove all nails from lumber • DO NOT operate this tool while under the influence of drugs, alcohol, or any medication. • POLARIZED PLUGS. To reduce the risk of electric shock, this tool has a peladzed plug (one blade is wider than the other). This plug will fit in a polar* izad outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. CORDS. When tool • WHEN SERVICING CRAFTSMAN is used outdoors, use only extension cords suitable for use outdoors. Outdoor approved cords are marked with the suffix W-A, for example - _JTW-A or SJOW-A, • CHECK DAMAGED before sanding. GOOD CONDITION. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord . ._wil_ cause a drop in line voltage resulting in loss of power and overheating. A wire gage size (A.W,G.) of at least 16 is recommended for an extension cord 1O0feet or less in length. A cord exceeding 100 feet is not recommended. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord. • Watch replaced by an authorized service canter. plugged-in tool with finger on switch. Be sure switch is off when plugging in. • CONTROL the tool, a guard or other part that is damaged should be sarefu;ly checked to determine that it will operate propedy and perform its intended function. Check for alignment of moving parts, binding of moving pads, breakage of parts, mounting and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center. servicing, or when changing attachments, tools should be disconnected from power supply. • CORDS and replace if damaged. what you are doing and use common sense. Do not operate tool when you are tired. Do not rush. MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories. DISCONNECT INSPECT EXTENSION • USE ONLY IDENTICAL REPLACEMENT SAVE THESE INSTRUCTIONS. PARTS, Refer to them frequently and use them to instruct others who may use this tool, If you loan someone this tao), loan them these instructions also. NEVER USE THIS OR ANY POWER SANDER SAVE THESEINSTRUCTIONS 4 SizeofPaper NoLoad Speed t/4sheet 14,000 opm Rating 120 Volts, 60 Hz, AC only Input Orbital Motion Paper Type Your sander has been shipped completely assembled except for the dust bag. Inspect it carefully to make sure no breakage or damage has occurred during shipping. If any parts are damaged or missing, contact your nearest Sears Retail Store to obtain replacement parts before attempting to operate sander. The dust bag, sandpaper, paper punch, and this owner's manual are also included in the box, _. 2.0 Amperes Non-Adhesive Sandpaper Adhesive Sandpaper WARNING: If any parts are missing, do not operate this tool until the missing parts are replaced. Failure to do so could result in possible sarious personal injury. The foitowing recommended accessories are currently available at Sears Retail Stores. ALUMINUM OXIDE SHEETS WITH PAPER BACKING (1/4 SHEET) Item No. 2-28275-- X-Pine Item No. _-28276 -- Fine Item No. _-28277-- Medium Item No. _-28278 -- Coarse PRESSURE-SENSmVE ADHESIVE, PAPER BACKED SHEETS (1/4 SHEET) Item No. _-28280 -- X-Fine Item No. J_-28281 -- Fine Item NO. _-28282 -- Medium Item No. _-28283 -- Coarse THE FOLLOWING STANDARD 4-1/2 NON-LOADING X 11 In. SANDING SHEETS CAN BE CUT TO FIT YOUR SANDER. ALUMINUM OXIDE SANDING SHEETS Item No. p28250-- X-Fine Item No. _1-28251 -- Fine - ,:_ Item No. _28252 -- Medium Item NO. _p28253-- _IL WARNING: Coarse The use of attachments or accessories not listed might be hazardous. 5 KNOW YOUR SANDER ELECTRICAL CONNECTION See Figure 1. Your sander has a precision built electric motor. It should be connected to a power supply that ts 120 volts, 60 Hz, AC only (normal household current). De not operate this tool on direct current (DC). A substantial voltage drop will cause a Ioes of power and the motor will overheat. If your tool does not operate when plugged into an outlet, double-check the power supply. Before attempting to use your sander, familiarize yourseit with all operating features and safely requirements. Your sander has a comfortable paJm gdp handle that provides maximum one-hand control and comfort, plus it reduces operator fatigue during continuous sanding operations; it has quick action paper damps; it is suitable for sanding with coarse, medium, and fine grit sandpaper;, and has a built-in dust collection that collects dust through punched holes in the sandpaper and oushion. A SWITCH WARNING: Do not allow familiarity with your sander to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury. APPUCATIONS This tool has a simple switch control. To tum your sander ON, depress the switch button as shown in figure 1. Depress the switch button in the opposite direction to turn your sander OFF. (Use only for the purposes listed below) El Sandingon woodsurfaces. • Removingrestfromandsanding steelsurfaces. SWITCH ON OFF SWITCH PAPERCLAMP DUST BAG CUSHION LEVER PAPERPUNCH _k TAB Fig. 1 WARNING: Yoursandershould neverbe connectedto powersupply whenyou am assembling peha, makingadjustments, assemblingor raplanlng_ndpeper, cleaning,or whennot In usa. Disconnectingyour sander will preventaccidentalstarting that couldcausesedous personalinjury, 8 INSTALUNG SANDPAPER INSTALUNG ADHESIVE See F_Jres E end 3, See Figure 2. The cushion on your sander gives you the option of using either non-adhesive sandpaper that clamps to the platen; Or adhesive backed sandpaper with pressure sensitive adhesive backing that sticks to the cushion, • Unplug your sender. _, SANDPAPER WARNING: Failure to unplug your sender could result in accidental starting causing possible serious personal injury. INSTALUNG NON-ADHESIVE SANDPAPER See Figure2. Inspectsandpaper beforeinstalling.Do not use if brokenor defective. • if replacing sandpaper, remove old sandpaper by peeling it off cushion. If removing regular sendpaper, release paper clamp by lifting up on lever and disengaging it from the tab on the platen. • Unplug yoursender. • Remove non-adhesive sandpaper, then lift up on paper clamp lever and lock it into place. • WARNING: Failure to unplug your sander could resuR in accidental starting causing possible serious personal injury. • Position sandpaper, making sure front edge of sandpaper is aligned with front edge of the cushion, then carefully press sticky side of " sandpaper on cushion. Note: Sandpaper must be aligned with the front edge of the cushion for proper functioning of the flush sanding feature. See Figure 2. Note: The cushion on your sander is approximately 1/4 in, smaller than precut adhesive backed sanding sheets. If desired you may want to trim off the overhang of sandpaper on the back side of cushion. The cushion has been made smaller so that multiple sheets of non. adhesive sandpeper san he installed, NON-ADHESIVE SANDPAPER PAPER CUSHION A paper punch template has been supplied with your sander. It should be used for aligning and punching holes in the sandpaper for alignment with the hales in the cushion. TAB Punching the holes properly is a necessary step in order for the dustless feature of your sender to function properly. POSITION _ .. SL.AN_DPAPER"" PUNCH See Figure 3. PAPERCLAMP PAPER CLAMP IN UNLOCKED Carefully peel adhesive backing from new 1/4 sheet sandpaper. _ Fig. 2 • If replacing sandpaper, remove old sandpaper. To remove paper, release paper clamp by lifting up on lever and disengaging it from the tab on the platen. • Insert end of new 114 sheet sandpaper approximately (1/2 inch) under the paper clamp. • Lift up on lever and lock !nto place. Apply downward pressure to conform sandpaper to platen. • Wrap sandpaper around cushion, Uft lever on opposite and of sander and insert loose end of sandpaper under the paper clamp. Fit sandpaper against cushion as tight as possible, • Lift up on lever and lock into place. PAPERPUNCH ORIENTPAPER PUNCH ASSHOWN Fig.3 7 _1_ WARNING: Always wear safety goggles or safety glasses with side shields when operating your sander. Failure to do so could result in foreign objects being thrown into your eyes, resulting in possible serious injury. If the sanding operation is dusty, also wear a face or dust mask. SANDPAPER SELECTION Selecting the correct size grit and type sandpaper is an extremely important step in achieving a high quality sanded finish. Aluminum oxide, silicon carbide, and other synthetic abrasives are best for power sanding. Natural abrasives, such as flint and gamet are too soft for economical use in power sanding. In general, coarse grit will remove the most material and finer grit will produce the best finish in all sanding operations. The condition of the surface to be sanded will determine which grit will do the job. If the surface is rough, start with a coarse grit and sand until the surface is uniform. Medium grit may then be used to remove scratches left by the coarser grit and finer grit used for finishing of the surface. Always continue sanding with each grit until surface is uniform. Note: Do not use sander without sandpaper, Doing so will damage the cushion. PREPARING _k FOR OPERATION CAUTION: Be careful not to let your hand cover the air vents. SANDING Clampor otherwisesecurethe workto preventit from movingunderyoursender. Fig. 4 Do not force. The weight of the unit supplies adequate pressure, so let the sandpaper and sander do the work, Applying additional pressure only slows the motor, rapidly wears sandpaper and greatly reduces sander speed. Excessive pressure will overload the motor causing possible damage from motor overheating and can result in infedor work. Any finish or resin on wood may soften from the frictional heat. Do not allow sanding on one spot too long as the sander's rapid action may remove too much material, making the surface uneven. Flush sanding can be performed with your sanden See Figure 5. The front edge of your sander allows flush sanding in corners. Always remove sander from workpleca before turning your sander oft. _1= WARNING: Unsecuredwork couldbe thrown towardsthe operatorcausing injury. Hold your sander in front and away from you, keeping it clear of the workpieco. Start your sander by pressing-the switch button to on position and letting the motor build to its maximum speed. Gradually lower your sander on the work with a slight forward movement. See Figure 4. Move it slowly using forward and backward strokes. _. WARNING: Do not wear loose clothing or jewelry when operating sander. They could get caught in moving parts causing serious injury. Keep head away from sander and sanding area. Hair could be drawn into sander causing serious injury, Fig, 5 ORBITAL MOTION Orbital motion isideal for fast cutting action when removing old finishes, smoothing rough wood, cutting stock down to required dimensions, or for finishing surfaces to be painted. As shown in figure 6. the sandpaper moves in tiny circles at a very high speed, a_iowi_ the sander to move easily. DUSTBAG TO REMOVE DUSTBAG Fig. 6 DUSTLESS • _k Slide dust bag retainer from sander as shown by the arrow in figure 7. Note: Grooves on dust bag retainer align with grooves on your sander, • Empty dust bag. DUST BAG See Figure 8. The dust bag $ocatad on the rear ot your sandeT provides a dust collection system for your sander. Sanding dust is drawn up through the holes of the cushion and collects in the dust bag during sanding operafion. For more efficient operation, empty dust bag when half full. TO EMPTY • TO INSTALL SANDING Fig. 7 • _k Unplug your sander. WARNING: Failure to unplug your sender could rssuStin accidenta$ stadin 9 ss,usk_j possible sedous personal injury. DUST BAG DUST BAG Unplug your sander. WARNING: Failure to unplug your sander could result in accidental starting causing passible serious persouat in)uPj. • Unzip dust bag. • Shake dust bag to empty. • _Zi_ dust bag up after emptying. TO REMOVE DUST BAG FOR EMPTYING OR CLEANING See Figure7. • Unplugyour sander. DUST BAG RETAINERGROOVES GROOVES _, ON SANDER WARNING: Failure to unplug your sander could result in accidental starting causing possible sedous personal injury. 9 Fig. 8 • Realign grooves on dust bag retainer with grooves on your sander, • Slide dust bag assembly into place as shown by the arrow in figure 8. _1, EXTENSION CORDS WARNING: When servicing use only identical Craftsman replacement parts. Use of any other parts maycreato a hazard or cause product damage. The use of any extension cord will cause some loss of power. To keep the loss to a minimum and to prevent tool from overheating, use an extension cord that is heavy enough to carry the current the tool will draw, GENERAL A wire gage size (A.W,G.) of at least 16 Is recom. mended for an extension cord 100 feat or less in Only the parts shown on parts list, page thirteen, are intended to be repaired or replaced by the customer. All other parts represent an Important part of the double insulation system and should be serviced only by a qualified Sears service technician. length. When working outdoors, use an extension cord that is suitable for outdoor use. The cent's jacket will be marked WA. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use, Use clean cloths to remove dirt, carbon dust, etc, _ _, CAUTION: Keep extensioncurds away fromthe sending area endpositionthe cordsothat it will not get caught on lumber, tools, etc. during sanding. WARNING: Check extension cords before each use. If damaged replace immediately. Never use tool with a damaged cord since touching the damaged area could cause electrical shock resutiing in sedous injury. WARNING: Do not at any time let brake fluids, gasoline, petrolaum-basod products, penetrating oils, etc. come in contact with plastic pads. They contain chemicals that can damage, weaken, or destroy plastic. Extension cords suitable for use with your sander aie available at your nearest Sears Retail Store, It has been found that elactdc tools are subject to accelerated wear and possible premature failure when they are used on fiberglass boats, sports cars, wallboard, spackling compounds, or plaster. The chips and gdndings from these materials are highly abrasive to electric too! paris such as bearings, brushes, commutators, etc. Consequently, it is not recommended that this tool be used for extended _k WARNING: Always wear safety goggles or safety glasses with side shields dudng power tool operation or when blowing dust. If operation is dusty, also wear a dust mask. LUBRICATION work on any fiberglass material, wallboard, spackling compounds, or piaster. During any use on these matedals it is extremely important that the too! is cleaned frequently by blowing with an air jet. All of the beadngs in this tool are lubricated with a sufficient amount of high grade lubricant for the life of the unit under normal operating conditions. Therefore, no further lubrication is required. I0 r- 11 CRAFTSMAN SANDER - MODEL NO. 315.277011 SEE NOTE "A" PAGE 13 6 ! \ \ 14 12 CRAFTSMAN I SANDER - MODEL NO. 315.277011 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your SANDER or when order;ng repair pads, SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS PARTS LIST Key No. Part Number 1 031500-300 Clamp ...................................................................... 2 2 968700-004 • Screw (#6-19 x 5/16 in. Pan Hd.) ............................ 2 3 968700-007 * Screw (#6-19 x 1/2 in. Pan Hd,) .............................. 2 4 662316-001 Fan Baffle .................................................. 5 979655-001 Data Plate ................................................................ 1 6 662514-001 Dust Bag Assembly ................................................. 1 7 979653-001 Logo Plate ................................................................ 1 6 Description Ouan. . ............. 1 Sandpaper *t* 9 662318-001 Wire Clamp .............................................................. 10 623019-004 Rubber Plug ............................................................. 1 11 662315-003 Platen ....................................................................... 1 12 662317-004 Cushion .................................................................... 1 13 617966-030 • Screw (#8-10 x 5/8 in. Pan Hd.) .............................. 4 14 662447-001 Paper Punch ............................................................ 1 15 662870-001 Dust Shield .............................................................. 1 972000-555 Owner's Manual 2 NOTE: "A"- The assembly shown represents an Important part of the Double Insulated System. To avoid the posslblllty of alteration or damage to the system, service should be performed by your nearest Sears Repair Center. Contact your nearest Sears Retail Store for Service Center information. * Standard Hardware *** Complete Assortment Item - May Be Purchased Locally Available At Your Nearest Sears Retail Store 13 I For in-home major brand repair service: Call 24 hours a day, 7 days a week 1-800-4-MY-Home Pars pedir servicio de reparaci6n _" (1-800-469-4663) a domlcilio - 1-800-676-5811 In Canada for all your service and pads needs call Au Canada pour tout le service ou les pi_ces For the repair or replacement - 1-800-665-4455 parts you need: Call 7 am - 7 pm, 7 days a week 1-800-366-PART (1-800-366-7278) Para ordenar For the location piezas con entrega a domicilio of a Sears Parts and Repair - 1-800-659-7084 Center in your area: Call 24 hours a day, 7 days a week 1-800-488-1222 For information on purchasing a Sears Maintenance Agreement or to inquire about an existing Agreement: Call 9 am - 5 pm, Monday - Saturday 1-800-827-6655 HomeCentral s" I I The Service Side of Sears"
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 14 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Sat Sep 29 14:14:12 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools