Craftsman 4 0Hp Electric Chainsaw 18 Owners Manual

2015-03-28

: Craftsman Craftsman-4-0Hp-Electric-Chainsaw-18-Owners-Manual-660018 craftsman-4-0hp-electric-chainsaw-18-owners-manual-660018 craftsman pdf

Open the PDF directly: View PDF PDF.
Page Count: 18

Operator’s Manual
Model No.
172.34120 18-In. Bar
15 Amp/4.0 Peak HP Motor
Electric Chain Saw
• WARRANTY
• SAFETY
• UNPACKING
• ASSEMBLY
• OPERATION
• MAINTENANCE
• PARTS LIST
• ESPAÑOL
CAUTION: Read, understand and follow all
Safety Rules and Operating Instructions in this
Manual before using this product.
TABLE OF CONTENTS
2
SAVE THESE INSTRUCTIONS!
READ ALL INSTRUCTIONS!
3025736
WARNING:
Some dust particles created by lawn and garden tools
contain chemicals known to the state of California to cause cancer, birth defects
or other reproductive harm. Some examples of these chemicals are:
!
• Compounds in fertilizers, herbicides, pesticides, and insecticides.
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending upon how often you do this
type of work. To reduce your exposure to these chemicals:
• Work in a well-ventilated area
• Work with approved safety equipment, such as those dust masks
that are specially designed to filter out microscopic particles.
NOTE: Chain and Bar Oil is not included. BEFORE using this Chain Saw,
do not forget to purchase Craftsman Bar & Chain Oil, SAE30.
CRAFTSMAN LIMITED WARRANTY
FOR TWO YEARS from the date of sale, this product is warranted against
defects in material or workmanship.
WITH PROOF OF SALE, a defective product will be replaced free of charge.
For warranty coverage details or to obtain free replacement,
visit the web site: www.craftsman.com
This warranty does not cover the bar and chain, which are expendable parts that
can wear out from normal use within the warranty period.
This warranty is void if this product is ever used while providing commercial services
or if rented to another person.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
Warranty……………………………..........................................……………..Page 2
Safety Symbols……………………..........................................……………..Page 3
Safety Instructions……………………..........................................……….....Pages 4 - 13
Unpacking..……………………………...........................………………….....Page 13
Description………………………………..........................................………..Pages 14 - 15
Assembly and Adjustments………………………………..............................Pages 16 - 18
Operation Terms...................………………………......................................Pages 19
Operation...................………………………..........................................…...Pages 20 - 28
Maintenance/Trouble Shooting..........………...............................………....Pages 29 - 30
Specifications..........…………………….......................................................Pages 31
Parts Lists.......……………………..........................................……………....Pages 32 - 34
3
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to possible
dangers. The safety symbols and the explanations with them deserve your
careful attention and understanding. The symbol warnings do not, by
themselves, eliminate any danger. The instructions and warnings they give
are no substitutes for proper accident prevention measures.
WARNING: Be sure to read and understand all safety instructions in this
manual, including all safety alert symbols such as “DANGER,”
“WARNING,” and “CAUTION” before using this rotary tool. Failure to follow
all instructions listed in this manual may result in electric shock, fire and/or
serious personal injury.
SYMBOL SIGNAL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR
CAUTION. May be used in conjunction with other symbols or pictographs.
DANGER: Indicates a hazardous situation which, if not avoided, will
result in death or serious injury. This signal word is to be limited to the most
extreme situations. Always follow the safety precautions to reduce the risk of
fire, electric shock, and personal injury.
WARNING: Indicates a hazardous situation which, if not avoided, could
result in death or serious injury. Always follow the safety precautions to
reduce the risk of fire, electric shock, and personal injury.
CAUTION: Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
Damage Prevention and Information Messages
These inform the user of important information and/or instructions that could
lead to equipment or other property damage if they are not followed. Each
message is preceded by the word “NOTE,” as in the example below:
NOTE: Equipment and/or property damage may result if these instructions
are not followed.
WARNING: To ensure safety and reliability, all repairs
should be performed by a qualified service technician.
WARNING: The operation of any power tools can
result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before beginning
power tool operation, always wear safety goggles or
safety glasses with side shield and a full face shield when needed. We
recommend a Wide Vision Safety Mask for use over eyeglasses or standard
safety glasses with side shields. Always use eye protection which is marked
to comply with ANSI Z87.1 shields.
4
SAFETY INSTRUCTIONS
WARNING:
If correctly used, this electric Chain Saw is an efficient
tool to use; if used improperly or without the due precautions it could become a
dangerous tool. For pleasant and safe work, ALWAYS strictly comply with the safety
rules that are contained in this manual.
!
WARNING:
BE SURE to read and understand all instructions in this manual
before using this electric Chain Saw. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious personal injury.
!
WARNING:
To avoid mistakes that could cause serious injury, DO NOT
connect the Chain Saw to the power source until the following instructions
have been read and understood.
!
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
The term power tool in the warnings refers to your electric (corded) power tool or battery-operated
(cordless) power tool.
WORK AREA SAFETY
• Avoid Dangerous Environment - Don't use appliances in damp or wet locations.
• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with grounded power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
• Avoid body contact with grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
• Do Not Abuse Cord - Never carry appliance by cord or yank it to disconnect from receptacle.
Keep cord from heat, oil, and sharp edges.
Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
• Operating a power tool in a damp location is unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an GFCI reduces the risk of electric shock.
WARNING:
Consider the work area environment. Use extreme caution
when cutting small size brush and saplings because the slender material may catch
the saw chain and be whipped toward you or pull you off balance. DO NOT operate
a chain saw in a tree unless specifically trained to do so. When cutting a limb that is
under tension be alert for spring back so that you will not be struck when the tension
in the wood fibers is released.
!
GENERAL POWER TOOL SAFETY WARNINGS
WARNING:
Read all safety warnings and instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
!
SAFETY INSTRUCTIONS cont.
Safety Helmet
Protection
Eye
Protection
Heavy Duty
Gloves
Hearing
Protection
Safety Shoes
Safety Chaps
Snug Fitting
Clothing
• Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal injuries.
• Avoid Unintentional Starting - Do not carry plugged-in appliance with finger on switch.
Be sure switch is off when plugging in.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or
a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce
dust-related hazards.
PERSONAL SAFETY
• Don't grasp the exposed cutting blades or cutting edges when picking up or holding
the appliance r power tool.
• Don't Force Appliance/Power Tool - It will do the job better and with less likelihood of a
risk of injury at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power tool
before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts
and any other condition that may affect the power tools operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• Maintain Appliance With Care - Keep cutting edge sharp and clean for best performance and to
reduce the risk of injury. Follow instructions for lubricating and changing accessories.
Inspect appliance cord periodically, and if damaged, have it repaired by an authorized service facility.
Inspect extension cords periodically and replace if damaged. Keep handles dry, clean, and free
from oil and grease.
• Use the power tool, accessories and tool bits etc., in accordance with these instructions
and in the manner intended for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
• USE ONLY chains that are recommended for this Chain Saw. Chains that may be
suitable for one Chain Saw may become hazardous when used on another Chain Saw.
• Keep the chain saw a sufficient distance away from electrical power lines.
POWER TOOL USE AND CARE
SERVICE
• Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
5
6
SAFETY INSTRUCTIONS cont.
EXTENSION CORDS
Use a proper extension cord. ONLY use cords listed by Underwriters Laboratories (UL).
Other extension cords can cause a drop in line voltage, resulting in a loss of power
and overheating of tool.
For this tool an AWG (American Wire Gauge) size of a least 14-gauge is recommended
for an extension cord of 25-ft. or less in length. Use 12-gauge for an extension cord
of 50-ft. Extension cords 100-ft. or longer are not recommended.
WARNING:
GFCI (Ground Fault Circuit Interrupter) protection should be
provided on all circuits or outlets to be used for electric chain saws and lawn and
garden power tools. Receptacles are available having built-in GFCI protection and
should be used for this measure of protection.
• Double insulation DOES NOT take the place of normal safety precautions when
operating this tool.
•
Guard against electric shock: Prevent body contact with grounded surfaces.
For example: metal pipes, wire fences.
!
3. BEFORE plugging in the tool, BE SURE that the outlet voltage supplied is within the voltage
marked on the tool’s data plate. DO NOT use “AC only” rated tools with a DC power supply.
4. DO NOT expose tools to rain or wet conditions or use electric tools in wet or damp
locations. Water entering an electric tool will increase the risk of electric shock.
5. If operating an electric tool in damp locations is unavoidable, ALWAYS USE a
Ground Fault Circuit Interrupter to supply power to your tool. ALWAYS WEAR
electrician’s rubber gloves and footwear in damp conditions.
6. To reduce the risk of electric shock, use only with an extension cord intended for outdoor use,
such as an extension cord of cord type: SW-A, SOW-A, STW-A, STOW-A, SJW-A,
SJOW-A, SJTW-A. or SJTOW-A.
7. INSPECT tool cords for damage. Have damaged tool cords repaired at a Sears Service Center.
BE SURE to stay constantly aware of the cord location and keep it well away
from the cutting blade.
8. DO NOT abuse the extension cord. NEVER use the cord to carry the tool by or to
pull the plug from the outlet. Keep cord away from heat, oil, sharp edges or moving parts.
Replace damaged cords immediately. Damaged cords increase the risk of electric shock.
ELECTRICAL SAFETY
WARNING:
Do not permit fingers to touch the terminals of plug when
installing or removing the extension cord from the plug.
!
1. Double insulated tools are equipped with a polarized plug
(one blade is wider than the other and will require the use of a
polarized extension cord. The Chain Saw’s plug will fit into a
polarized extension cord only one way. If the plug does not fit fully into
the extension cord, reverse the plug. If the plug still does not fit, obtain
a correct polarized extension cord. A polarized extension cord will require the use of a polarized
wall outlet. This plug will fit into the polarized wall outlet only one way. If the plug does not fit
fully into the wall outlet, reverse the plug. If the plug still does not fit, contact a qualified
electrician to install the proper outlet. Do not change or alter the equipment plug,
extension cord receptacle, or extension cord plug in any way.
2. Double insulation eliminates the need for the three-wire grounded power cord and
grounded power supply system. Applicable only to Class II (double-insulated) tools.
This Chain Saw is a double insulated tool.
7
SAFETY INSTRUCTIONS cont.
Remember, a smaller wire gauge size has greater capacity than a larger number
(14-gauge wire has more capacity than 16-gauge wire; 12-gauge wire has
more capacity than 14-gauge). When in doubt use the smaller number.
!
CAUTION:
Keep the extension cord clear of the work area. Position the cord so that it will
not get caught on bushes, hedges, tree trunks, lawnmowers or other obstructions while you are
working with the Chain Saw.
WARNING:
Check extension cords before each use. If damaged replace immediately.
Never use tool with a damaged cord since touching the damaged area could cause electrical
shock, resulting in serious injury.
!
SAFETY SYMBOLS FOR YOUR TOOL
EXTENSION CORDS cont.
The label on your tool may include
the following symbols.
Remove plug from mains immediately
if the cable is damaged or cut.
V................Volts
A................Amps
Hz..............Hertz
W...............Watts
min............Minutes
.............Alternating current
...........Direct current
no ............ No-load speed
.../min.......Revolutions or Strokes per minute
.............Indicates danger, warning or caution.
It means attention! Your safety is
involved.
Contact of the guide bar tip with
any object should be avoided.
.........
Tip contact may cause the guide
bar to move suddenly upward
and backwards, which may cause
serious injury to user.
.........
Read and follow all safety
precautions in the owner’s manual
Failure to follow to instruction
could result in serious injury to user.
.........
Do not expose to rain.
.........
.........
Do not use one handed when
operating the chain saw.
.........
......... Correct Direction of Cutting-Teeth.
.........Chain Stop
.........Protective goggles/visor,
helmet & hearing protection.
.........Gloves with saw protection.
.........Boots with saw protection,
steel-toe cap and non-slip sole.
.........Always use two hands when
operating the chain saw.
.........The chain saw kickback angle
is 10 , with a chain stop.
10º
..........Class II construction,
Double-Insulation. When servicing,
use only identical replacement parts.
......... Wear dust mask.
Minimum guage for extension cords
Method of securing
extension cord
8
SAFETY INSTRUCTIONS cont.
5. ALWAYS remove objects such as sticks and debris from the cutting path that could
become entangled in, or thrown by the Chain Saw.
6. DO NOT start cutting until you have a clear work area, secure footing, especially if you
are felling a tree, a retreat path. Keep work area clean.
7. DO NOT operate with one hand. Serious injury to the operator, helpers, or bystanders
may result from one handed operation. A pole saw/chain saw is intended for two-handed
use.
8. DO NOT operate chain saw from a ladder or in a tree.
9. MAKE SURE the chain will not make contact with any object while starting the saw.
NEVER start the saw when the guide bar is in a cut.
10. DO NOT force chain saw. It will do the job better and safer at the rate for which it was
intended.
11. DO NOT put pressure on the saw, especially at the end of the cut. Doing so can cause
you to lose control when the cut is completed.
12. STOP the saw before setting it down.
13. Carry the chain saw by the front handle with the chain saw switched off and away
from your body. When transporting or storing the chain saw always fit the guide
bar cover. Proper handling of the chain saw will reduce the likelihood of accidental
contact with the moving saw chain.
14. Use the right tool, CUT WOOD ONLY. Don't use chain saw for purpose not intended;
for example, don't use chain saw for cutting plastic, masonry, non-wood building materials.
15. DO NOT operate a chain saw that is damaged, improperly adjusted, or not
completely and securely assembled. Always replace bar, chain, hand guard, or other
parts immediately if they become damaged, broken, or are otherwise removed.
16. Tool service should be performed at a Sears Parts and Repair Center or other
qualified service dealer. Service or maintenance performed by unqualified personnel
could result in a risk of injury.
17.
Keep all parts of the body away from the saw chain when the chain saw is operating.
Before you start the chain saw, make sure the saw chain is not contacting anything.
A moment of inattention while operating chain saws may cause entanglement of your
clothing or body with the saw chain.
SERVICE SAFETY
1. If any part of this Chain Saw is missing or should break, bend, or fail in
any way; or should any electrical component fail to perform properly: SHUT OFF the
power switch and remove the power cord from the Chain Saw and have the missing,
damaged or failed parts replaced BEFORE resuming operation.
2. Tool service should be performed at a qualified service dealer or repair center.
Service or maintenance performed by unqualified personnel could result in a risk of injury.
3. When servicing a tool, use only identical replacement parts. Follow instructions
in the maintenance section of this manual. Use of unauthorized parts or failure to
follow maintenance instructions may create a risk of electric shock or injury.
SAFETY RULES FOR ELECTRIC CHAIN SAWS
1. KNOW your electric Chain Saw. Read operator’s manual carefully. Learn the
applications and limitations, as well as the specific potential hazards related to this tool.
Following this rule will reduce the risk of electric shock, fire or serious injury.
2. DO NOT use the Chain Saw without adequate lighting.
ALWAYS make sure that you can see what you are cutting.
3. Use Chain Saw ONLY when wood is dry.
4. ALWAYS stand to the left of the Handle. Any debris thrown by the Chain Saw would be
coming from the Blade Guard area on the right of the Chain Saw.
9
SAFETY INSTRUCTIONS cont.
WARNING:
NEVER reach under the Chain Saw (chain area) until you have
unplugged Chain Saw and the Chain has come to a complete stop.
The Chain Saw’s chain will continue to rotate for a few seconds after it is switched off.
!
WARNING:
BE SURE to read and understand all instructions. Failure to
follow all instructions listed below may result in electric shock, fire and/or
serious personal injury.
!
ADDITIONAL RULES FOR SAFE OPERATION
1. ALWAYS wear safety goggles or safety glasses with side shields, and a full-face shield
when using this Chain Saw. We recommend a Wide Vision Safety Mask for use
over eyeglasses or standard safety glasses with side-shield, available at Sears Stores or
other Craftsman Outlets.
2. PROTECT your lungs. Wear a face mask, dust mask or respirator if the operation is dusty.
3. PROTECT your hearing. Wear appropriate personal hearing protection during use.
Under some conditions noise from this product may contribute to hearing loss.
25. MAINTAIN chain saw with care.
26. KEEP unit sharp and clean for better and safer performance.
27. FOLLOW INSTRUCTIONS for lubricating and changing accessories.
28. UNPLUG the chain saw from the power source when not in use, before
servicing, and when changing accessories and attachments, such as saw chain
and guard.
29. CHECK FOR DAMAGED PARTS. Before further use of the pole saw/chain saw, a guard
or other part that is damaged should be carefully checked to determine that it will operate
properly and perform its intended function. CHECK for alignment of moving parts, binding
of moving parts, breakage of parts, mounting and any other conditions that may affect its
operation. A guard or other part that is damaged should be properly repaired or replaced
by a qualified service dealer or repair center unless otherwise indicated elsewhere in the
operator's manual.
30. WHEN NOT IN USE, chain saws should be stored in a dry, high or locked-up
place out of the reach of children.
31. WHEN STORING CHAIN SAW, unplug and use a bar sheath or carrying
case.
SAFETY RULES FOR ELECTRIC
CHAIN SAWS cont.
18. A
lways hold the chain saw with your right hand on the rear handle and your left hand
on the front handle.
Holding the chain saw with a reversed hand configuration increases
the risk of personal injury and should never be done.
19.
Hold the power tool by insulated gripping surfaces only, because the saw chain may
contact hidden wiring or its own cord.
Saw chains contacting a “live wire” may make
exposed metal parts of the power tool “live” and could give the operator an electric shock.
20. Have all chain saw service performed by a qualified service dealer or repair
center except the items listed in the MAINTENANCE section of this manual.
21. MAKE CERTAIN saw chain stops moving when trigger switch is released.
22. KEEP the handles dry and clean and free from oil and grease.
23. KEEP oil cap and fasteners securely tightened.
24. Nonconforming replacement components or the removal of safety devices may cause
damage to the unit and possible injury to the operator or bystanders. Use only Craftsman
accessories and replacement parts as recommended. Never modify your saw.
10
SAFETY INSTRUCTIONS cont.
ADDITIONAL RULES
FOR SAFE OPERATION cont.
4.
Wear safety glasses and hearing protection. Further protective equipment for head,
hands, legs and feet is recommended.
Adequate protective clothing will reduce personal
injury by flying debris or accidental contact with the saw chain.
5. ALL VISITORS AND BYSTANDERS MUST wear the same safety equipment that the
operator of the tool wears.
6. ALWAYS check the tool for damaged parts. Check for misalignment or binding of moving
parts, breakage of parts, and any other condition that may affect the tool’s operation. Before
further use of the tool, a guard or other part that is damaged should be carefully checked to
determine if it will operate properly and perform its intended function. A guard or other part
that is damaged should be properly repaired or replaced at a qualified service dealer or
repair center service dealer.
7. Always keep proper footing and operate the chain saw only when standing on fixed,
secure and level surface. Slippery or unstable surfaces such as ladders may cause a loss
of balance or control of the chain saw.
8. Use extreme caution when cutting brush and saplings. The slender material may catch
the saw chain and be whipped toward you or pull you off balance.
9. Follow instructions for lubricating, chain tensioning and changing accessories.
Improperly tensioned or lubricated chain may either break or increase the chance for kickback.
10.
Only use replacement bars and chains specified by the manufacturer.
Incorrect replacement bars and chains may cause chain breakage and/or kickback.
11.
Follow the manufacturer’s sharpening and maintenance instructions for the saw chain.
Decreasing the depth gauge height can lead to increased kickback.
WARNING:
Follow all safety rules to help prevent Kickback which can
cause serious personal injury.
!
1. KICKBACK is the backward, upward or sudden forward motion of the guide bar occurring
when the saw chain near the upper tip of the guide bar contacts any object such as a log or
branch, or when the wood closes in and pinches chain in the cut. Contacting a foreign object
in the wood can also result in loss of chain saw control.
2. ROTATIONAL KICKBACK can occur when the moving chain contacts an object at the upper
tip of the guide bar. This contact can cause the chain to dig into the object, which stops the
chain for an instant. The result is a lightning fast, reverse reaction which kicks the guide bar
up and back toward the operator.
3. PINCH-KICKBACK can occur when the wood closes in and pinches the moving saw chain
in the cut along the top of the guide bar and the saw chain is suddenly stopped. This sudden
stopping of the chain results in a reversal of the chain force used to cut wood and causes the
saw to move in the opposite direction of the chain rotation. The saw is driven straight back
toward the operator.
AVOID KICKBACK AND PULL-IN
Kickback Path
Clear The
Work Area
Avoid
Obstructions
KICKBACK
11
SAFETY INSTRUCTIONS cont.
ADDITIONAL RULES
FOR SAFE OPERATION cont.
CAUSES AND OPERATOR PREVENTION OF KICKBACK:
• Kickback may occur when the nose or tip of the guide bar touches an object,
or when the wood closes in and pinches the saw chain in the cut.
• Tip contact in some cases may cause a sudden reverse reaction, kicking the guide bar up
and back towards the operator.
• Pinching the saw chain along the top of the guide bar may push the guide bar rapidly
back towards the operator.
• Either of these reactions may cause you to lose control of the saw which could result in
serious personal injury.
• Do not rely exclusively upon the safety devices built into your saw.
• As a chain saw user, you should take several steps to keep your cutting jobs free from
accident or injury.
•
Kickback is the result of tool misuse and/or incorrect operating procedures or conditions
and can be avoided by taking proper precautions as given below:
- Maintain a firm grip, with thumbs and fingers encircling the chain saw handles, with both
hands on the saw and position your body and arm to allow you to resist kickback forces.
Kickback forces can be controlled by the operator, if proper precautions are taken.
- Do not let go of the chain saw.
- Do not overreach and do not cut above shoulder height.
This helps prevent unintended tip contact and enables better control of the chain saw
in unexpected situations.
4. PULL-IN can occur when the moving chain contacts a foreign object in the wood in the cut
along the bottom of the guide bar and the saw chain is suddenly stopped. This sudden
stopping pulls the saw forward and away from the operator and could easily cause the
operator to lose control of the saw.
AVOID KICKBACK AND PULL-IN cont.
AVOID PINCH-KICKBACK
1. Be extremely aware of situations or obstructions that can cause
material to pinch the top of or otherwise stop the chain.
2. Do not cut more than one log at a time.
3. Do not twist the saw as the bar is withdrawn from an undercut when bucking.
AVOID PULL-IN
1. Always begin cutting with the saw at full speed and the saw housing against wood.
2. Use wedges made of plastic or wood. Never use metal to hold the cut open.
WARNING:
Follow all safety rules to help prevent Kickback
which can cause serious personal injury.
!
12
SAFETY INSTRUCTIONS cont.
ADDITIONAL RULES
FOR SAFE OPERATION cont.
WARNING:
The following features are included on your saw to help
reduce hazard of kickback; however, such features will not totally eliminate this
danger. Do not rely only on safety devices. Follow all safety rules to help avoid
kickback and other forces which can result in serious injury.
!
KICKBACK SAFETY FEATURES
1. Hand Guard: designed to reduce the chance of your left hand contacting the chain
if your hand slips off the front handlebar.
2. Position of Front and Rear Handle Bars AVOID KICKBACK: designed with distance
between handles and "in-line" with each other. The spread and "in-line" position of the hands
provided by this design work together to give balance and resistance in controlling the pivot
of the saw back toward the operator if kick back occurs.
3. Reduced-Kickback Guide Bar: designed with a small radius tip which reduces the size of the
kickback danger zone on the bar tip, see Fig. A below. This type of bar has been demonstrated
to significantly reduce the number and seriousness of kickbacks when tested in accordance
with ANSI B175.1.
Fig. A
Large Radius
Tip Guide Bar
Reduced
Kickback Guide Bar
Small Radius
Tip Guide Bar
Fig. B
Low Kickback Chain
Contoured Depth Gauge
Elongated Guard Link
deflects kickback force
and allows wood to
gradually ride into cutter
4. Low Kickback Chain has met kickback performance requirements when tested on the
representative sample of these chain saws specified in ANSI B175.1. See Fig. B below.
MAINTAIN CONTROL
1. A good, firm grip on the saw with both hands will help you maintain control. Don't let go.
Grip the rear handle with your right hand whether you are right or left handed. Wrap the
fingers of your left hand over and around the front handlebar, and your left thumb under
the front handlebar. Keep your left arm straight with the elbow locked.
2. Position your left hand on the front handlebar so it is in a straight line with your right
hand on the rear handle when making bucking cuts. Stand slightly to the left side of the
saw to keep your body from being in a direct line with the cutting chain.
3. Stand with your weight evenly balanced on both feet.
4. Do not overreach. You could be drawn or thrown off balance and lose control.
5. Do not cut above shoulder height. It is difficult to maintain control of saw above shoulder height.
WARNING:
!
STAND TO THE
LEFT OF SAW
Thumb on
underside
of handlebar
Elbow
Locked
WARNING:
!
NEVER
REVERSE
HAND
POSITIONS
13
SAFETY INSTRUCTIONS cont.
ADDITIONAL RULES
FOR SAFE OPERATION cont.
WARNING:
WE DO NOT REPRESENT AND YOU SHOULD NOT ASSUME THAT
THE CHAIN BRAKE WILL PROTECT YOU IN THE EVENT OF A KICKBACK.
Kickback
is a lightning fast action which throws the bar and rotating chain back and up toward the
operator. Kickback can be caused by allowing contact of the bar tip in the danger zone with
any hard object. Kickback can also be caused by pinching the saw chain along the top of the
guide bar. This action may push the guide bar rapidly back toward the operator. Either of these
events may cause you to lose control of the saw which could result in serious injury or even
death.
DO NOT RELY UPON ANY OF THE SAFETY DEVICES BUILT INTO YOUR SAW.
YOU SHOULD USE THE SAW PROPERLY AND CAREFULLY TO AVOID KICKBACK.
Reduced-Kickback guide bars and low-kickback saw chains reduce the chance and magnitude
of kickback and are recommended. Your saw has a low kickback chain and bar as original
equipment. Repairs on a chain brake should be made by a qualified service dealer or repair
center. Take your unit to the place of purchase if purchased from a servicing dealer,
or to your nearest qualified service dealer or repair center.
!
CHAIN BRAKE (
Built-In, Automatic and Manual Systems) See page 21, Figs. 8-9
1. Chain Brake: This Chain Saw is designed to stop tile chain in the event of kickback.
Both built-in, Automatic and Manual Chain Brake Systems reduce kick-back.
WARNING:
• Tip contact in some cases may cause a lightning fast REACTION,
kicking the guide bar up and back toward the operator.
• Pinching the saw chain along the tip of the guide bar may push the guide bar
rapidly back towards the operator.
• Either of these reactions may cause you to lose control of the saw which could
result in serious injury. Do not rely exclusively upon devices built into your saw.
!
CAUTION:
Exposure to vibrations through prolonged use of hand tools could
cause blood vessel or nerve damage in the fingers, hands, and joints of people
prone to circulation disorders or abnormal swelling. Prolonged use in cold weather
has been linked to blood vessel damage in otherwise healthy people. If symptoms
occur such as numbness, pain, loss of strength, change in skin color or texture, or
loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and
seek medical attention. An anti-vibration system does not guarantee the avoidance
of these problems. Users who operate power tools on a continual and regular basis
must closely monitor their physical condition and the condition of this tool.
!
2. PUSH hand guard forward to activate the chain brake MANUALLY.
RELEASE the trigger switch to activate chain brake AUTOMATICALLY.
IMPORTANT: Please see page 21, figures 8 and 9 for detailed instructions.
SAVE THESE INSTRUCTIONS.
Refer to them frequently and use them to instruct others
who may use this tool. If someone borrows this tool, make sure they have these instructions also.
UNPACKING
1. The Chain Saw comes fully assembled,
including the Chain /Chain Bar Assembly.
2. Do not discard box or packing material
until all parts are examined.
3. Remove Plastic Protective Chain and
Bar Cover before use.
WARNING:
If any part of the Chain Saw is missing or damaged, do not connect
the Chain Saw to the power source until the damaged part is repaired or replaced.
!
NOTE: Chain and Bar Oil is not included. BEFORE using this Chain Saw,
do not forget to purchase Craftsman Bar & Chain Oil, SAE30.
Fig. 1
DESCRIPTION
14
KNOW YOUR CHAIN SAW
Your Chain Saw has a precision built electric motor and it should only be connected
to a 120-volt, 60 Hz AC ONLY power supply (normal household current). The electric
Chain Saw should always be used with a GFCI (Ground Fault Circuit Interrupter) outlet.
DO NOT operate this Chain Saw on direct current (DC). The large voltage drop would cause
a loss of power and the motor would overheat.
If the Chain Saw does not operate when plugged into correct 120-volt, 60 Hz AC ONLY outlet,
check the power supply. The Chain Saw comes with an electric plug and should be plugged
into a proper extension cord (See page 6).
CHAIN SAW FEATURES:
• Power: 4.0 HP, 15 Amp motor
• Bar length: 18”
• Chain brake – Auto and manual
• Automatic lubrication system
• 2 in 1 Tool-less chain tension
and blade change with over
tensioning protection
• Large oil tank with visible gauge
• Oregon® chain and bar
• Extra chain – non-Oregon®
• Front metal bumper
• Weight 11.68 LBS
(when filled with oil)
1. Rear handle (See Fig. 2)
2. On/Off switch (See Fig. 2)
3. Lock-off button (See Fig. 2)
4. Oil filler cap (See Fig. 2)
5. Front handle (See Fig. 2)
6. Activation lever for kickback brake (front Hand Guard) (See Fig. 2)
7. Chain Guide bar (See Fig. 2)
8. Chain (See Fig. 2)
9. Spiked bumper (See Fig. 2)
10. Plastic Chain/Bar/Blade protection cover (See Fig. 2)
11. Locking knob/ Chain tensioning adjustment knob (See Fig. 2)
12. Cover plate (See Fig. 2)
13. Drive sprocket (See Fig. 3)
14. Guide fins for chain bar (See Fig. 3)
15. Symbol for rotation and cutting direction (See Fig. 3)
16. Chain tensioning catch (See Fig. 3)
17. Chain catcher (See Fig. 3)
18. Fastening bolt (See Fig. 3)
19. Oil level gauge (See Fig. 3)
NOTE: Before attempting to use this product, familiarize yourself with all
operating features and safety rules.
CHAIN SAW CALL-OUTS (See Figures 2 and 3 on page 15)
TECHNICAL DATA:
• Voltage: 120V
• Rated power: 4.0 HP, 15 Amp
• Bar length: 18”
• Chain speed: 12m/s
• Oil tank capacity: 200ml
• Chain pitch: 3/8”
• Number of chain links: 63
• Chain gauge: 0.05”
• Saw chain type: Oregon®, 18” (91PX063X)
Extra chain: E&S, ES91VS63E
• Bar type: Oregon®, 18” (180SDEA041)
• Weight (chain & bar included): 10.5 lbs
• Protection class: / II
15
DESCRIPTION cont.
KNOW YOUR CHAIN SAW cont.
CHAIN SAW CALL-OUTS cont. (Figures 2 and 3)
Fig 3.
Chain Rotation
Cover Plate
Fig 2.
16
ASSEMBLY & ADJUSTMENTS
The chain saw is intended for wood: sawing of trees, tree trunks, branches, wooden beams,
planks, etc. Cuts can be sawed with or across the grain. This product is not suitable
for sawing mineral materials, plastics or non-wood building materials.
INTENDED USE
CHAIN AND CHAIN BAR ASSEMBLY/REPLACEMENT
(See Figs. 4a, 4b, 4c, 4d and Pgs 14-15 for part reference)
WARNING:
Do not connect the chain saw to extension cord and power source
before it is completely assembled. Always use gloves when handling the chain.
!
13 14
18
Fig. 4b
1. Place the chain saw on any suitable flat surface.
2. (See Fig. 4a) Slide the chain (8) in the slot around the guide bar (7). Ensure chain is in
correct running direction by comparing with chain symbol (15). Ensure the chain tensioning
catch (16) is facing outwards.
3. (See Fig. 4b) Fit the chain onto the drive sprocket (13) and guide the guide bar (7), so that
the fastening bolt (18) and the two guide fins (14) fit into the keyway of the guide bar (7).
4. Check to make sure all parts are seated
properly and hold chain and guide bar in
a level position. (See Fig. 4c)
5. Fit cover plate, ensure that the chain
catcher (17) fits into the groove of the
cover plate (12). (See Figs. 2 & 3, pg.15)
6. Press the cover plate firmly onto the
machine and screw on the cover plate (12)
with the locking knob (11). (See Fig. 2, pg.15)
ASSEMBLY
NOTE: This Chain Saw comes fully assembled, including the Chain /Chain Bar Assembly.
Included is an extra Chain. See below for Chain/Chain Bar Replacement.
8 16 7
Fig. 4a
NOTE: The chain is not yet tensioned.
Tensioning the chain applies as described
under “Tensioning chain”.
Fig. 4c
Cover Plate
17
ASSEMBLY & ADJUSTMENTS cont.
WARNING:
Unplug chain saw from
power source before adjusting saw chain
tension.
!
WARNING:
Cutting edges on chain
are sharp. Use protective gloves when
handling chain.
!
WARNING: ALWAYS Maintain proper chain tension. A loose chain will
increase the risk of kickback. A loose chain may jump out of guide bar groove.
This may injure operator and damage chain. A loose chain will cause chain, chain
bar, and sprocket to wear rapidly. The chain life of the saw chain mainly depends
upon sufficient lubrication and correct tensioning. Avoid tensioning the chain if it
is hot, as this will cause the chain to become over tensioned when it cools down.
!
TENSIONING CHAIN/LOCKING KNOB
Always check the chain tension before use,
after the first cuts and regularly during use.
Upon initial operation, new chains can lengthen
considerably.
1. Place the chain saw on any suitable flat surface.
2. Turn the locking knob/ chain tensioning knob
clockwise until the locking knob is screwed tightly,
(See Fig. 4d). The correct chain tension will be
reached automatically. The ratchet mechanism
prevents the chain tension from loosening.
3. The correct chain tension is reached when the chain
can be raised approx. 3-6 mm (1/8 to 1/4-in.) from
the chain bar in the centre. This should be done by
using one hand to raise the chain against the
weight of the machine. (See Fig. 5)
4. When the chain loosens, unscrew the locking
knob/chain tensioning knob absolutely and then
Screw on the cover plate with the locking knob
tightly again.
Fig. 5
Fig. 4d
NOTE: Use one hand
to raise chain.
approx.
3-6 mm
(1/8 to 1/4-in.)
18
ASSEMBLY & ADJUSTMENTS cont.
CAUTION:
The chain saw is NOT supplied filled with oil. It is essential to fill with oil
before use. Never operate the chain saw without chain oil or at an empty oil tank level, as
this will result in extensive damage to the product. Chain life and cutting capacity depends on
optimum lubrication. Therefore, the chain is automatically oiled during operation via oil outlet
!
LUBRICATION
Filling oil tank: (See Fig. 6)
1. Set chain saw on any suitable surface with oil filler cap facing upward.
2. Clean area around the Oil Filler Cap with cloth and unscrew the cap by turning
it counter clockwise.
3. Add bar and chain oil (Craftsman Bar & Chain Oil, SAE30) until reservoir is full.
4. Avoid dirt or debris entering oil tank, re-screw oil filler cap and tighten.
CAUTION:
To allow venting of the oil reservoir, small breather channels are
provided between the oil filler cap and the strainer. To prevent leakage, ensure machine is
left in a horizontal position (oil filler cap uppermost) when not in use.
It is important to use only the recommended oil to avoid damage to the chain saw.
Never use recycled/old oil. Use of non approved oil will invalidate the warranty.
!
Fig. 6
19
CHAINSAW OPERATION TERMS
Bucking – The process of cross cutting a felled tree or log into lengths.
Chain Stop Lever – A device used to stop the chain saw.
Chain Saw Power Head – A chain saw without the saw chain and guide bar.
Drive Sprocket or Sprocket – The toothed part that drives the saw chain.
Felling – The process of cutting down a tree.
Felling Back Cut – The final cut in a tree felling operation made on the opposite side of
the tree from the notching undercut.
Front Handle – The support handle located at or toward the front of the chain saw.
Front Hand Guard – A structural barrier between the front handle of a chain saw and
the guide bar, typically located close to the hand position on the front handle and sometimes
employed as an activating lever for a chain brake.
Guide Bar – A solid railed structure that supports and guides the saw chain.
Kickback – The backward or upward motion, or both of the guide bar occurring when the
saw chain near the nose of the top area of the guide bar contacts any object such as a log
or branch, or when the wood closed in the pinches the saw chain in the cut.
Kickback, Pinch – The rapid pushback of the saw which can occur when the wood closes
in and pinches the moving saw chain in the cut along the top of the guide bar.
Kickback, Rotational – The rapid upward and backward motion of the saw which can occur
when the moving saw chain near the upper portion of the tip of the guide bar contacts an
object, such as a log or branch.
Low-Kickback Chain – A chain that complies with the kickback performance requirements
of ANSI B175.1-1991 when tested on a representative sample of chain saws.
Normal Cutting Position – Those positions assumed in performing the bucking and felling
cuts.
Notching Undercut – A notch cut in a tree that directs the tree’s fall.
Oiler Control – A system for oiling the guide bar and saw chain.
Rear Handle – The support handle located at or toward the rear of the saw.
Reduced Kickback Guide Bar – A guide bar which has been demonstrated to reduce
kickback significantly.
Replacement Saw Chain – A chain that complies with the kickback performance
requirements of ANSI B175.1-1991 when tested with specific chain saws. It may not meet
the ANSI performance requirements when used with other saws.
Saw Chain – A loop of chain having cutting teeth, that cut the wood, and that is driven by
the motor and is supported by the guide bar.
Spiked Bumper (Gripping Teeth) – The pointed tooth or teeth for use when felling or bucking
to pivot the saw and maintain position while sawing.
Switch – A device that when operated will complete or interrupt an electrical power circuit
to the motor of the chain saw.
Switch Linkage – The mechanism that transmits motion from a trigger to the switch.
Lock-off Button – A movable stop that prevents the unintentional operation of the switch
until manually actuated.
20
OPERATION
1. Insert extension cord socket into Chain Saw’s Plug (Fig. 7a).
2. An Extension Cord Retainer is attached to the Handle to reduce strain on the cord.
To use this feature, simply double the extension cord as shown, about a foot from
the end, and insert it into the end of the Retainer. Place the loop formed by
doubling the cord over the Hook (Fig. 7b). Gently tug on the cord to ensure that it
is firmly situated in the Retainer (Fig. 7c).
3. Keep extension cord clear of operator, unit and any obstacles at all times.
Do not expose the cord to heat, oil, water, or sharp edges.
ATTACHING EXTENSION CORD
Fig. 7a
Cord locked in Extension Cord Retainer
Completed
Fig. 7cFig. 7b
21
WARNING:
Check the voltage and electric current supply: The voltage
and current supply must comply with the ratings on the data plate.
!
SWITCHING ON AND OFF (Fig. 8)
OPERATION cont.
1. To switch the Chain Saw ON, press the
lock-off button, then fully press the on/off
switch (2) and hold in this position.
The lock-off button (3) can now be released.
2. To switch the Chain Saw OFF, release the on/off
switch (2). Do not stop chain saw after sawing
by activating the front hand guard
(manual chain brake).
Lock-off (3)
Fig. 8
Fig. 9
On/Off switch (2)
THE CHAIN BREAK (
Built-In, Manual and Automatic and Systems)
(Figs. 8 and 9)
The MANUAL chain brake is a safety mechanism activated through the front
hand guard (6) when kickback occurs. Chain stops immediately.
The following function check should be carried out at regular intervals.
1. MANUAL CHAIN BRAKE (See Fig. 9): PUSH front hand guard (6) forward (position 2 )
and try starting the chain saw. The chain must not start. To deactivate the kickback brake,
pull hand guard (6) backwards (position 1), and release On/Off (trigger) switch (2),
(See Fig. 8 for On/Off switch location).
Pos. 1
Pos. 1
6 Hand Guard
Pos. 2
(trigger)
2.
AUTOMATIC CHAIN BRAKE:
RELEASE the On/Off (trigger) switch to activate
chain brake AUTOMATICALLY, (
See Fig. 8 for On/Off switch location).
22
OPERATION cont.
CAUTION:
Do not touch the ground with the chain. Ensure safety clearance
of 20 cm. (7-7/8 inch.) If an increasing oil pattern develops, the automatic oiler is
operating fine. If there is no oil pattern, despite a full oil reservoir,
see “Troubleshooting”.
!
CUTTING
Check oil level gauge prior to starting and regularly during operation. Refill oil when oil
level is low. The oil tank filling will last approx. 16 minutes, depending on sawing intensity
and stops. (See Fig. 6 on page 18)
Confirm the chain tension is in working order and the chain sharp.
Check new replaced chain tension during operation.
Upon initial operation, new chains can lengthen considerably. The condition of the chain
influences the cutting performance. Only a sharp chain protects from overload.
Make sure you are wearing the necessary protective equipment.
Wear safety glasses/goggles/visor – safety helmet and hearing protection.
Further protective equipment for head, hands, legs and feet is highly recommended.
Adequate protective clothing will reduce personal injury by flying debris or accidental
contact with saw chain.
Proper functioning of the automatic oiler can be checked by running the chain saw and
pointing the tip of the chain bar towards a piece of cardboard or paper on the ground.
KICKBACK is the backward, upward or sudden forward motion of the guide bar occurring
when the saw chain near the upper tip of the guide bar contacts any object such as a log or
branch, or when the wood closes in and pinches chain in the cut. Contacting a foreign object
in the wood can also result in loss of chain saw control.
When kickback occurs the chainsaw reacts unpredictably and can cause severe injuries
to the operator or bystanders. Particular attention must be given when sawing sideward,
slanted or during length cuts, as the spiked bumper usually can not be applied.
To avoid kickback:
• Saw with guide bar at a flat angle.
• Never work with a loose, widely stretched or the heavily worn out chain.
• Ensure chain is sharpened correctly.
• Never saw above shoulder height.
• Never work with the tip of the guide bar.
• Always hold the chain saw firmly with both hands.
• Always use a low kickback chain.
• Apply the metal gripping teeth for leverage.
• Ensure correct chain tension.
Kickback Path
Clear The
Work Area
Avoid
Obstructions
KICKBACK (Fig. 10a, 10b) Fig. 10a Fig. 10b
23
OPERATION cont.
Always hold the chain saw firmly with both hands. Front grip with the left hand and rear grip
with the right hand. Fully grip both handles at all times during operation.
(See Figs. 11 and 12)
Never operate chain saw using only one hand. Ensure power cord is located to the rear,
away from the chain and wood and so positioned that it will not be caught on branches or the
like during cutting.
(see THE CHAIN BREAK, page 21)
The chain must be running at full
speed before it makes contact
with the wood.
Use the metal gripping teeth to
secure the saw onto the wood
before starting to cut.
Use the spiked bumper (9) as a
leverage point while cutting.
(See Fig. 13)
GENERAL CUTTING
Fig. 11 Fig. 12
Fig. 13
STAND TO THE
LEFT OF SAW
Thumb on
underside
of handlebar
Use the chain saw only with secure footing.
Hold the chain saw at the right-hand side of your body.
(See Figs. 11 and 12)
9
Spiked Bumper
24
OPERATION cont.
Reset the gripping teeth at a low point when sawing thicker logs by pulling the chain saw
slightly backwards until the gripping teeth release, and reposition at lower level to continue
sawing.
(See Fig. 13)
• Do not remove the saw completely
from the wood.
• Do not force the chain while cutting,
let the chain do the work, using the
gripping teeth to apply minimal
leverage pressure.
• Do not operate the chain saw with
arms fully extended or attempt to saw
areas which are difficult to reach,
or on a ladder. Never use the chain
saw above shoulder height.
(See Fig. 14)
GENERAL CUTTING cont.
Fig. 14
NOTE: Sawing is optimized when
the chain speed remains steady
during cutting.
Beware when reaching the end
of the cut. The weight of the saw
may change unexpectedly as it
cuts free from the wood.
Accidents can occur to the legs
and feet.
Always remove the saw from
a wood cut while the saw is
running.
NOTE: Do not attempt a pruning or limbing operation in a standing tree unless
specifically trained to do so.
NOTE: When cutting a limb that is under tension or compression,
be alert for springback.
WARNING:
Never use the chain
saw above shoulder
height.
!
25
OPERATION cont.
CUTTING LOGS
Observe the following safety instructions:
Support logs so that the face sides at the cut do not close in against each other,
which would result in the chain being jammed or pinched. (See Figs. 15 and 16)
CUTTING WOOD UNDER TENSION (See Fig. 16)
There is a high risk of accidents when sawing wood, branch or trees under tension.
Be extremely careful. Leave saw jobs like these to professionals.
When sawing logs supported on both ends, start the cut from above (Y) about 1/3 of the
diameter into the log and then finish the cut (Z) from below, in order to avoid contact of the
chain saw with the ground. When sawing logs supported on only one end, start the cut
from below (Y) about 1/3 of the diameter into the log and finish the cut from above (Z) in
order to avoid log splitting or jamming of the chain saw.
CAUTION:
!
Position and set short logs safety prior to sawing. Saw only wood or wooden objects.
When sawing, always take care to avoid hitting stones, nails, ect, as these could be
thrown up or cause damage to the chain or serious injury to the operator or bystanders.
Keep a running saw clear or wire fencing or the ground.
Use of the saw to thin out branches or bushes is not approved.
Length cuts must be carried out with care, as leverage with the spiked bumper is
not possible. Saw at a flat angle to avoid kickback.
When working on a slope, operate above or to the side of the trunk or laying tree.
Be careful not to trip over tree stumps, branches, roots, etc.
GENERAL CUTTING cont.
Fig. 15 Fig. 16
Z
Y
kg
Z
Y
26
OPERATION cont.
FELLING TREES (See Fig. 17)
Always wear hard hat to protect head against falling branches.
The chain saw can only be used to fell trees smaller in diameter than the length of the
guide bar.
1. Secure work area (See 1, Fig. 17). Ensure no persons or animals are in the vicinity
of the falling tree. Never attempt to free a jammed saw with the motor running.
Use wooden wedges to free chain and guide bar.
When cutting and felling operations are being performed by two or more persons,
at the same time, the felling operations should be separated from the cutting operation by
a distance of at least twice the height of the tree being felled. Trees should not be felled in
a manner that would endanger any person, strike any utility line or cause any property
damage. If the tree does make contact with any utility line, the company should be
notified immediately.
The chain saw operator should keep on the uphill side of the terrain as the tree is likely to
roll or slide downhill after it is felled.
2. An escape path (See 2, Fig. 17) should be planned and cleared as necessary before cuts
are started. The escape path should extend back and diagonally to the rear of the expected
line of fall.
3. Before felling is started (See 3, Fig. 17), consider the natural lean of the tree,
the location of larger branches and the wind direction to judge which way the tree will fall.
Remove dirt, stones, loose bark, nails staples, and wire from the tree.
Notching undercut: Make the notch (x-w)
1/3 the diameter of the tree, perpendicular
to the direction of falls as make the lower
horizontal notching cut first. This will help to
avoid pinching either the saw chain or the
guide bar when the second notch is being
made.
Felling back cut: Make the felling back cut (Y)
at least 50 mm (2-Inches) higher than the
horizontal notching cut. Keep the felling back
cut parallel to the horizontal notching cut.
Make the felling back cut so enough wood is left to act as a hinge. The hinge wood keeps
the tree from twisting and falling in the wrong direction. Do not cut through the hinge.
As the felling gets close to the hinge the tree should begin to fall. If there is any chance
that the tree may not fall in desired direction or it may rock back and bind the saw chain,
stop cutting before the felling back cut is complete and use wedges of wood, plastic,
or aluminum to open the cut and drop the tree along the desired line of fall.
When the tree begins to fall remove the chain saw from the cutting, stop the motor,
put the chain saw down, and then use the retreat path planned. Be alert for overhead limbs
falling and watch your footing.
To complete the felling operation, drive a wedge (Z) into the horizontal cut.
BEWARE of falling branches when the tree starts to move.
GENERAL CUTTING cont.
2 2
WYZ
X
50mm
50mm
1
3
1
1
Fig. 17
27
OPERATION cont.
Limbing is removing the branches from
a fallen tree. When limbing leave larger
lower limbs to support the log off the
ground.
Remove the small limbs in one cut as
illustrated. Branches under tension
should be cut from the bottom up to
avoid binding the chain saw.
LIMBING A TREE (See Fig. 18)
BUCKING A LOG (See Fig. 19)
Bucking is cutting a log into lengths.
It is important to make sure your footing
is firm and your weight is evenly
distributed on both feet. When possible,
the log should be raised and supported
by the use of limbs, logs or chocks.
Follow the simple directions for easy
cutting.
When the log is supported along its
entire as illustrated, it is cut from the
top (overbuck).
When the log is supported
on one end, as illustrated,
cut 1/3 the diameter from
the underside (underbuck).
Then make the finished cut
by overbucking to meet the
first cut. (See Fig. 20)
Fig. 19
Fig. 18
2
2/3
1
1/3
Fig. 20
GENERAL CUTTING cont.
28
OPERATION cont.
When the log is supported on both
ends, as illustrated, cut 1/3 the
diameter from the top overbuck.
Then make the finished cut by
underbucking the lower 2/3 to meet
the first cut. (See Fig. 21)
When bucking on a slope always
stand on the uphill side of the log,
as illustrated.
When “cutting through”, to maintain
complete control release the cutting
pressure near the end of the cut
without relaxing your grip on
the chain saw handles.
Don’t let the chain contact
the ground.
After completing the cut, wait for
the saw chain to stop before you
move the chain saw.
Always stop the motor before
moving from tree to tree.
(See Fig. 22)
BUCKING A LOG cont.
1
2/3
2
1/3
Fig. 21
Fig. 22
GENERAL CUTTING cont.
29
MAINTENANCE
GENERAL MAINTENANCE
Carry out necessary maintenance or repairs before using the chain saw. If the chain saw
should happen to fail despite the care taken in manufacturing and testing, repair should be
carried out by an authorized, qualified service dealer or repair center.
Before returning, ensure all oil in the oil tank has been emptied.
Replacing/Changing Chain And Guide Bar
Fit the chain and guide bar as described in “Assembly and Tensioning Chain”,
(See pages 16 and 17). The circular groove of the guide bar will wear particularly on the
lower edge with time. When replacing the chain turn the chain bar 180° to allow even wear,
thus extending chain bar life.
Check Drive Sprocket. If it is worn out or damaged due to strain,
have it exchanged by an authorized service dealer.
If The Chain Bar Is Worn Out Or Damaged,
take the chain tensioning catch off the bar by loosing
the screw counter-clockwise. Then fit the tensioning
catch into the new bar by tightening the screw clockwise.
The catch protrude (1) must be fitted into the bar hole.
(See Fig. 23)
Sharpening Chain. Have your chain sharpened
professionally at your approved service dealer or
repair center or sharpen the chain yourself using
the sharpening kit. Follow the sharpening instructions
supplied with the sharpening kit.
WARNING:
Before performing any work on the Chain Saw, disconnect the
Chain Saw’s power plug from the extension cord and power source.
!
WARNING:
DO NOT use the Chain Saw if it has any broken parts.
ALWAYS have damaged, missing, worn or broken parts replaced before using.
!
NOTE: To ensure long and reliable service, carry out the following maintenance
regularly and before each use:
Regularly check for obvious defects such as loose, dislodged or damaged chain and
guide bar, loose fixings and worn or damaged components. Inspect the switch and cord
for damage. Check that covers and guards are undamaged and correctly fitted.
NOTE: WHEN SERVICING a tool, use only identical replacement parts.
Use of unauthorized parts or failure to follow maintenance instructions may create
a risk of electric shock or injury.
1
Fig. 23
30
TROUBLE SHOOTING
GENERAL MAINTENANCE cont.
• Clean the moulded plastic housing of the chain saw using a soft brush and clean cloth.
DO NOT use water, solvents or polishes.
• Remove all debris, especially from the motor cooling vents.
• Remove and brush clean the cover plate, chain and chain bar after 1 to 3 hours of use.
• Clean the area under the cover plate, the drive sprocket and chain bar assembly using
a soft brush.
• Clean oil outlet with a clean cloth.
• If the chain saw is to be stored for a longer period of time, clean chain and chain bar.
STORE IN A SECURE, DRY PLACE OUT OF THE REACH OF CHILDREN.
• Do not place other objects on the chain saw.
• To prevent oil leakage, ensure machine is left in a horizontal position.
• When storing machine in original packaging the oil tank must be completely emptied.
CLEANING / STORAGE
SYMPTOM POSSIBLE CAUSE
Chain saw fails to operate Kickback brake is activated
No power
Mains socket faulty
Extension cord damaged
Pull hand guard back in
position 1 (See Figure 9)
Check power
Use another socket
Check cord, replace
Chain saw operates
intermittently
Extension cord damaged
Loose connection
Internal wiring defective
On/Off defective
Check cord, replace
Contact service agent
Contact service agent
Contact service agent
Dry chain No oil in reservoir
Oil passage clogged
Clean cap
Clean oil passage outlet
Kickback Brake/Run
Down Brake
Brake does not stop chain Contact service agent
Chain/chain bar overheats No oil in reservoir
Oil passage clogged
Chain is over tensioned
Dull chain
Clean cap
Clean oil passage outlet
Adjust locking knob
Sharpen chain or replace
Chain saw rips, vibrates,
does not saw properly
Chain tension too loose
Dull chain
Chain worn out
Chain teeth are facing in the
wrong direction
Adjust locking knob
Sharpen chain or replace
Replace chain
Reassemble with chain in
correct direction
Vent in oil filler cap clogged
Refill oil
Refill oil
Vent in oil filler cap clogged
Never use tools with defective On/Off switches or defective Kickback brake (Hand Guard).
In the case of all other types of technical faults, please contact helpline or qualified service dealer
or repair center.
SPECIFICATIONS
Model 71-34120
Voltage 120V~60Hz
Amps 15A
Bar length 18”
Chain speed 12m/s
Oil tank capacity 6.76 oz. (200ml)
Chain pitch 3/8”
Number of chain links 63
Chain gauge 0.05”
Chain
Extra Chain Included
Oregon®: 18” (91PX063X)
Bar Oregon®: 18” (180SDEA041)
Weight (chain & bar included) 10.5 lbs
Protection class / II
31
E&S: ES91VS63E
32
PARTS LIST
Model No.
172.34120.00 18-In. Bar
15 Amp/4.0 Peak HP Motor
Electric Chain Saw
Parts No. Part Description Qty.
Position No.
GCS450U.1-201
GCS450U.1-1
GCS450U.1-2
GCS450U.1-3
GCS450U.1-4
GCS450U.1-5
GCS450U.1-6
GCS450U.1-8
GCS450U.1-9
GCS450U.1-10
GCS450U.1-11
GCS450U.1-12
GCS450U.1-13
GCS450U.1-13
GCS450U.1-14
GCS450U.1-15
GCS450U.1-16
GCS450U.1-17
GCS450U.1-19
GCS450U.1-20
GCS450U.1-21
GCS450U.1-22
GCS450U.1-203
GCS450U.1-23
GCS450U.1-24
GCS450U.1-25
GCS450U.1-27
201
1
2
3
4
5
6
8
9
10
11
12
13
13
14
15
16
17
19
20
21
22
203
23
24
25
27
Motor set
Nut
Torsional Spring
Carbon Brush(pair)
Rear Bracket
Bearing
Rotor
Bearing
Stator
Front Bracket
Screw
Bracket
Self Tapping Screw
Self Tapping Screw
Brake Bracket
Switch
Pinion
Retaining Ring
Power Cord
Cable Protector
Terminal Port
Cord Clamp
Inner Wire
Inner Wire
Inner Wire
Inner Wire
Front Handle Assembly
1
2
2
1
1
1
1
1
1
1
2
1
4
22
1
1
1
2
1
1
1
1
1
1
1
1
1
Parts No. Part Description Qty.
Position No.
GCS450U.1-28
GCS450U.1-29
GCS450U.1-30
GCS450U.1-31
GCS450U.1-32
GCS450U.1-33
GCS450U.1-34
GCS450U.1-35
GCS450U.1-36
GCS450U.1-37
GCS450U.1-38
GCS450U.1-39
GCS450U.1-40
GCS450U.1-204
GCS450U.1-41
GCS450U.1-42
GCS450U.1-43
GCS450U.1-44
GCS450U.1-45
GCS450U.1-46
GCS450U.1-47
GCS450U.1-48
GCS450U.1-49
GCS450U.1-50
GCS450U.1-205
GCS450U.1-51
GCS450U.1-53
28
29
30
31
32
33
34
35
36
37
38
39
40
204
41
42
43
44
45
46
47
48
49
50
205
51
53
Protect Plate
Rated Label
Decorative Cover
Houshing
Tube I
Rotating Plate
Washer
Torsional Spring
Trigger
Button
Torsonial Spring
Oil Bottle Cap
Extension Spring
Connecting Pole Set
Rivet
Ring
Linkage
Extension Spring
Belt
Duck Bill
Rubber Washer
Oil Bottle
Oil Tube Ⅱ
Self tapping screw
Pump Assembly
Oil Exit
Compression Spring
1
1
1
1
1
1
4
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
The model number will be found on the nameplate of the Chain Saw.
Always mention the model number when requesting parts and service
for your tool.
To order parts, call 1-888-331-4569
Model No.
172.34120.00 18-In. Bar
15 Amp/4.0 Peak HP Motor
Electric Chain Saw
The model number will be found on the nameplate of the Chain Saw.
Always mention the model number when requesting parts and service
for your tool.
To order parts, call 1-888-331-4569
Parts No. Part Description Qty.
Position No.
GCS450U.1-54
GCS450U.1-55
GCS450U.1-56
GCS450U.1-57
GCS450U.1-58
GCS450U.1-59
GCS450U.1-60
GCS450U.1-61
GCS450U.1-62
GCS450U.1-63
GCS450U.1-64
GCS450U.1-65
GCS450U.1-66
GCS450U.1-206
GCS450U.1-67
GCS450U.1-68
GCS450U.1-69
GCS450U.1-70
GCS450U.1-71
GCS450U.1-72
GCS450U.1-73
GCS450U.1-74
GCS450U.1-75
GCS450U.1-207
GCS450U.1-76
GCS450U.1-77
GCS450U.1-78
GCS450U.1-79
GCS450U.1-80
54
55
56
57
58
59
60
61
62
63
64
65
66
206
67
68
69
70
71
72
73
74
75
207
76
77
78
79
80
Steel ball
O Ring
Pump Housing
Pump
O Ring
Washer
Compression Spring
Pump Rod
Oil Tube Ⅰ
Tube
Washer
Self Tapping Screw
Chain
Guide Bar
Self Tapping Screw
Guide Bar
Press Block
Chain Sheath
Torsional Spring
Tube
Rotating Block I
Needle Bearing
Washer
Output Shaft
Gear
Spindle
Washer
Bearing
Self Tapping Screw
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
Parts No. Part Description Qty.
Position No.
GCS450U.1-82
GCS450U.1-83
GCS450U.1-84
GCS450U.1-85
GCS450U.1-86
GCS450U.1-87
GCS450U.1-89
GCS450U.1-90
GCS450U.1-91
GCS450U.1-92
GCS450U.1-208
GCS450U.1-93
GCS450U.1-94
GCS450U.1-95
GCS450U.1-96
GCS450U.1-97
GCS450U.1-98
GCS450U.1-99
GCS450U.1-100
GCS450U.1-101
GCS450U.1-209
GCS450U.1-102
GCS450U.1-103
GCS450U.1-104
GCS450U.1-105
GCS450U.1-106
GCS450U.1-107
GCS450U.1-108
GCS450U.1-301
82
83
84
85
86
87
89
90
91
92
208
93
94
95
96
97
98
99
100
101
209
102
103
104
105
106
107
108
301
Chain Wheel
Self Tapping Screw
Oil Seal
Chain Catcher
Ring
Spiked Bumper
Compression Block
Cam
Chain Guard Housing
Brand Lable
Clutch Assembly
Clutch Drum
Compression Spring
Clamping Plate
Stater Bowel
Brake Disc I
Brake Disc II
Clamping Plate I
Self tapping screw
Spring
Tension Knob
Self tapping screw
Pwal
Tube
Torsional Spring
Knob
Ring I
Washer
Self Tapping Screw
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1
3
3
3
3
1
1
1
1
PARTS LIST
33
34
PARTS LIST
Model No.
172.34120.00 18-In. Bar
15 Amp/4.0 Peak HP Motor
Electric Chain Saw
35
NOTES

Navigation menu