Craftsman 486 24608 Owners Manual
48624608 48624608 CRAFTSMAN FRONT BUMPER - Manuals and Guides L0904375 View the owners manual for your CRAFTSMAN FRONT BUMPER #48624608. Home:Lawn & Garden Parts:Craftsman Parts:Craftsman FRONT BUMPER Manual
CRAFTSMAN Accessories, Tractor Manual L0904375 CRAFTSMAN Accessories, Tractor Owner's Manual, CRAFTSMAN Accessories, Tractor installation guides
486.24608 L0904375
2015-01-05
: Craftsman Craftsman-486-24608-Owners-Manual-160920 craftsman-486-24608-owners-manual-160920 craftsman pdf
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
Owner's IVlanuai ® FRONT U E DO NOT RETURN IVlodel No. 486.24608 TO STORE For Missing Parts or Assembly Questions Call 1-866-576-8388 Fits 917 Series LT/YT/GT Tractors ,,iiiiiii-............... iiiiiiiiii CAUTION: ,, ,, ,, ,, ,, Before using this product, read this manual and follow all Safety Rules and Operating Instructions. Sears, Roebuck and Co., Hoffman Estates, Safety Assembly Operation Maintenance Parts IL 60179 U.S.A. www.craftsman.com PRINTED iN U.S.A. FORM NO. 42033 (02/05109) WARRANTY CRAFTSMAN ONE=YEAR SAFETY .,_ FULL WARRANTY When assembled, operated and maintained according to the supplied instructions, if this product fails due to a defect in material or workmanship within one year from the date of purchase, return it to any Sears store or other Craftsman outlet in the United States for free replacement. Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times when using power equipment. • Refer to your tractor owners manual for "Rules For Safe Operation". This warranty is void if this product is ever used for commercial or rental purposes. Look for this symbol to point out important safety precautions. It means -- Attention!! Become alert!! Your safety is involved. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co., D817WA, Hoffman Estates, IL 60179 BEFORE YOU BEGIN TOOLS REQUIRED (2) CAUTION! Muffler is hot[ Allow engine to cool down before proceeding with bumper installation. 9/16" Wrenches (Socket wrench may be used) DETERMINE [FYOUR TRACTOR HAS A SINGLE SUSPENSION OR DUAL SUSPENSION BRACKETS SINGLE SUSPENSION BRACKET BRACKET .i) DUAL SUSPENSION BRACKETS t SUSPENSION BRACKET SUSPENSION SUSPENSION BRACKET BRACKET FIGURE 1A (page 3) FIGURE 1B (page 5) Look under the front of your tractor (Figure 1A & 1B). If there is a single mower deck suspension bracket located underneath the middle of the front axle, continue on to INSTRUCTIONS FOR SINGLE SUSPENSION BRACKET TRACTORS on page 3. If your tractor does not have a mower deck suspension bracket underneath the middle of the front axle, skip to INSTRUCTIONS FOR DUAL SUSPENSION BRACKET TRACTORS on page 5. 2 Call 1-866-576-8388 for missing parts or assembly help DO NOT RETURN TO STORE iNSTRUCTiONS STEP 1: * (SEE FIGURE FOR SINGLE SUSPENSION 2) BRACKET TRACTORS HARDWARE SHOWN FULL SiZE EXCEPT WHERE NOTED Open parts bag labelled "A" and verify that all parts are present. NOTE: Place cardboard or a mat on work surface to prevent scratching of parts removed from carton and tractor. (not full size) PARTS BAG "A" FIGURE 2 Ref. Part Qty. Description A B C 43350 44072 R19171616 4 4 4 Carriage Bolt, 3/8-16 x 1" Whizlock Nut, 3/8" Washer, 1/2"xl" D 47674 66460 4 1 Plug Bumper STEP 2: (SEE FIGURE 3) • Remove tractor hood. (Refer to tractor manual.) Remove the browning shield as shown. REMOVE FRONT SCREWS REMOVE BROWNING SHIELD FIGURE STEP 3: (SEE FIGURE 4) Place plug on a work bench or solid table and push end of bumper down onto plug. Repeat for remaining plugs. 3 BUMPER PUSH DOWN WiTH EVEN PRESSURE WORK BENCH OR SOLID TABLE I STEP 4: (SEE FIGURE 5) Place a washer onto a carriage bolt and then insert the bolt into the second mounting hole from the front of the tractor frame. Securely tighten a whizlock nut onto the bolt on the outside of the tractor frame. Repeat on other side of tractor. CARRIAGE BOLT AND WASHER \ WHIZLOCK NUT FIGURE 5 Call 1-866-576-8388 for missing parts or assembly help DO NOT RETURN TO STORE 3 STEP 5: (SEE FIGURE 6) * * CARRIAGE BOLT AND WASHER Spread ends of bumper enough to fit slots onto bolts in rear mounting holes in tractor frame. The bumper has three mounting holes. The rear holes provide the most clearance while the forward holes provide a neater appearance. Use a hole that provides enough clearance for the hood to stay in raised position when opened. Place a washer onto a carriage bolt and insert the bolt through the tractor frame and into desired mounting hole on each side of bumper. Secure with a whizlock nut. WHIZLOCK NUT FIGURE 6 iMPORTANT: Before fully tightening nuts, be sure tractor hood will stay in raised position when opened. STEP 6: (SEE FIGURE 7) * Replace the browning shield using the front screws you removed in Step 2. REPLACE FRONT SCREWS REPLACE BROWNING SHIELD 4 Call 1-866-576-8388 FIGURE 7 for missing parts or assembly help DO NOT RETURN TO STORE iNSTRUCTiONS FOR DUAL SUSPENSION STEP 1: (SEE FIGURE 2) * BRACKET TRACTORS HARDWARE SHOWN FULL SiZE EXCEPT WHERE NOTED Open parts bags labelled "A" and "B" and verify that all parts needed are present. NOTE: Place cardboard or a mat on work surface to prevent scratching of parts removed from carton and tractor. NOTE: Not all hardware will be used. Unused parts may be discarded after assembly STEP 2: (SEE FIGURE 3) e e Remove tractor hood. (Refer to tractor manual.) Remove an (LT) Lawn Tractor heat shield like the one shown. Remove a (GT) Garden Tractor heat shield like the one shown only if you need access to inside of tractor frame during step 5. Ref. Part A B C D E 48894 43062 43001 44072 43003 Qty. Description 2 2 4 4 4 Self Threading Bolt, 3/8-16 x 1-1/2" Hex Bolt, 3/8-16 x 1-1/2" Hex Bolt, 3/8-16 x 1" Whizlock Nut, 3/8" Lock Washer, 3/8" F 47674 65932 4 1 Plug Bumper (LT) LAWN TRACTOR REMOVE THISSHIELD STYLE HEAT iMPORTANT: Be sure to re-attach the heat shield after bumper is installed. (GT) GARDEN TRACTOR REMOVE THIS HEAT SHIELD ONLY IF MUFFLER MUST BE MOVED IN STEP 4. jFIGORE 3 Call 1-866-576-8388 for missing parts or assembly help DO NOT RETURN TO STORE 5 STEP 3: (SEE FIGURE 4) * Place plug on a work bench or solid table and push end of bumper down onto plug. Repeat for remaining plugs. BUMPER PUSH DOWN WITH EVEN PRESSURE SHORT STEP WORK BENCH OR SOLID TABLE ,_'_ PLUG (E) I STEP 4: (SEE FIGURE 5) * _-_ FIGURE4 (LT) LAWN TRACTOR Remove any bolts present in front mounting holes in side of tractor frame. If bolt will not screw out of hole, check if a nut is present on bolt on inside of frame. On GT tractors, if access to nut is blocked by a front mounted muffler, slide muffler down exhaust tubes to rest on top of browning shield. REMOVE BOLT iF PRESENT iNSTALL (C), (D) IF HOLE iS EMPTY iMPORTANT: Be sure to re-attach muffler and heat shield after bumper is installed. • If rear mounting holes in tractor frame are empty, install hex bolts and whizlock nuts supplied in the parts bags. See figure 5. SUSPENSION BRACKET / (LT) LAWN TRACTOR REMOVE BOLT IF PRESENT INSTALL (C), (D) IF HOLE IS EMPTY SUSPENSION BRACKET (GT) GARDEN TRACTOR EXHAUSTTUBES MUFFLER BROWNING SHIELD / SUSPENSION BRACKET \/ REMOVE BOLT IF PRESENT FIGURE 5 6 Call 1-866-576-8388 for missing parts or assembly help DO NOT RETURN TO STORE STEP 5: (SEE FIGURE 6) * * Spread ends of bumper enough to fit slots onto bolts in rear mounting holes in tractor frame. The bumper has three mounting holes. The rear hole provides the most clearance while the forward holes provide a neater appearance. Use a hole that provides enough clearance for hood to stay in raised position when opened. Attach the bumper using either standard hex bolts and whizlock nuts or self threading bolts and lock washers. Use the self threading bolts if standard hex bolts do not insert freely into the hole in the tractor frame. LAWN TRACTOR (LT) SHOWN GARDEN TRACTOR (GT) iS SIMILAR WHIZLOCK NUT (D) FORBOLT(B) (E) iMPORTANT: Before fully tightening bolts, be sure tractor hood will stay in raised position when opened. FIGURE 6 Call 1-866-576-8388 for missing parts or assembly help DO NOT RETURN TO STORE 7 Your Home For expert troubleshooting and home solutions advice: www.managemyhome.com For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME Call anytime, ® (1-800-469-4663) day or night (U.S.A. and Canada) www.sears.com www.sears.ca Our Home For repair of carry-in items like vacuums, lawn equipment, and electronics, call anytime for the location of your nearest Sears Parts & Repair Service 1-800-488-1222 (U.S.A.) 1-800-469-4663 www.sears.com To purchase a protection 1-800-827-6655 agreement on a product serviced by Sears: 1-800-361-6665 (Canada) Para pedir servicio de reparaci6n a domicilio, y para ordenar piezas: ® Registered ® Marca Mc Marque Trademark Registrada / TMTrademark / TM Marca de commerce / MD Marque / sM Marca depos6e Au Canada pour service en fran£ais: 1-800-LE-FOYER ® / sM Service de Fabrica (Canada) www.sears.ca (U.S.A.) 1-888-SU-HOGAR Center M° (1-800-533-6937) www.sears.ca Mark of Sears de Servicio de Sears Brands, Brands, de Sears LLC LLC Brands, LLC © Sears Brands, LLC
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 8 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 4, 0, 0, 13 Create Date : Sun May 03 04:13:28 2009 Author : Title : Subject :EXIF Metadata provided by EXIF.tools