Craftsman 82147 Users Manual (DVA30)
82147 0e162656-a0a8-4f33-8f87-8e9368ae602f Craftsman Trimmer 82147 User Guide |
2015-01-05
: Craftsman Craftsman-82147-Users-Manual-161228 craftsman-82147-users-manual-161228 craftsman pdf
Open the PDF directly: View PDF .
Page Count: 1
Download | ![]() |
Open PDF In Browser | View PDF |
SAFETY PRECAUTIONS Owners’ Manual AC Voltage and Current Detector Model 82147 CAUTION: Read, understand and follow Safety Rules and Operating Instructions in this manual before using this product. ! Safety ! Operation ! Español ONE YEAR FULL WARRANTY ONE YEAR FULL WARRANTY ON CRAFTSMAN Detector If this CRAFTSMAN Detector fails to give complete satisfaction within one year from the date of purchase, RETURN IT TO THE NEAREST SEARS STORE OR OTHER CRAFTSMAN OUTLET IN THE UNITED STATES, and Sears will replace it, free of charge. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179 For Customer Assistance Call 9am 5pm (ET) Monday through Friday 1-888-326-1006 WARNING: USE EXTREME CAUTION IN THE USE OF THIS DEVICE. Improper use of this device can result in injury or death. Follow all safeguards suggested in this manual in addition to the normal safety precautions used in working with electrical circuits. DO NOT service this device if you are not qualified to do so. UL LISTED The UL mark does not indicate that this product has been evaluated for the accuracy of its readings. 1. Improper use of this meter can cause damage, shock, injury or death. Read and understand this manual before use. 2. Secure any covers or battery doors before use. 3. Inspect the condition of the meter for any damage before use. 4. Remove the batteries from the meter if the meter is to be stored for long periods. DESCRIPTION 1. 2. 3. 4. 5. 6. 7. 8. Current Sensor and LED Current Detector “ON” LED Current Detector Sensitivity adjustment Current/Voltage/OFF function selector switch Voltage Sensor and LED Voltage Detector “ON” LED Voltage Detector Sensitivity adjustment Audible beeper SPECIFICATIONS Voltage detection 12V to 600VAC Current sensitivity 200mA (0.2A) AC at 0.2” Audible indication Beeper (Voltage & Current) Visible indication Flashing LED (Voltage & Current) Frequency range 50 to 500Hz Operating Temperature 14 to 122°F (10°C to 50°C) Operating Humidity < 80% RH Altitude < 2000m Power supply (4) LR44 batteries Weight 2.1 oz. (60g) Dimensions 7.6 x 1.2 x 0.9” (192x31x24mm) IEC 1010 Category III 600V Indoor use BATTERY REPLACEMENT 1. Turn power OFF 2. Slide the pocket clip off (as shown) to access batteries. 3. Replace the four LR44 batteries. The negative sides of the batteries face in the same direction, as shown. The positive sides of the batteries face in the opposite direction. + OPERATING INSTRUCTIONS WARNING: Risk of Electrocution. Before use, always test the Detector on a known live circuit to verify proper operation VOLTAGE DETECTION 1. Slide the Function switch to the Voltage position. 2. The “VOLTAGE” LED will light. If the LED is dim or does not light, replace the batteries. 3. Set the Sensitivity adjustment to max. 4. If the detector begins to beep/flash, slowly turn the sensitivity down until the beep/flash stops. 5. Touch the detector voltage sensor to the hot conductor or insert into the hot side of the electrical outlet. 6. If AC voltage is present, the detector light will flash and the audible beeper will sound. 7. Adjust the sensitivity as needed to zero-in and identify the live conductor. WARNING: Risk of Electrocution. Before use, always test the Detector on a known live circuit to verify proper operation CURRENT DETECTION NOTE: There must be a load on the circuit (current flow) for the current detection function to work. 1. Slide the Function switch to the Current position. 2. The “CURRENT” LED will light. If the LED is dim or does not light, replace the batteries. 3. Set the Sensitivity adjustment to the max position 4. If detector begins to beep/flash, slowly turn the sensitivity down until the beep/flash stops. 5. Move the detector current sensor near the current carrying conductor until the current tip flashes and beeper sounds. 6. Slowly reduce the sensitivity and reduce the distance between the sensor and conductor to zero-in and identify the conductor. © Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www.craftsman.com 061906
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 1 Author : Vatche Arabian Creator : Word: cgpdftops CUPS filter Create Date : 2006:12:14 10:40:31-05:00 Modify Date : 2006:12:14 10:40:31-05:00 Producer : Mac OS X 10.4.8 Quartz PDFContext Title : Microsoft Word - 82147 (DVA30).docEXIF Metadata provided by EXIF.tools