Craftsman 900 74522 Users Manual
90074522 90074522 CRAFTSMAN TRIMMER/EDGER - Manuals and Guides L0411036 View the owners manual for your CRAFTSMAN TRIMMER/EDGER #90074522. Home:Lawn & Garden Parts:Craftsman Parts:Craftsman TRIMMER/EDGER Manual
CRAFTSMAN Hedge Trimmer, Electric Manual L0411036 CRAFTSMAN Hedge Trimmer, Electric Owner's Manual, CRAFTSMAN Hedge Trimmer, Electric installation guides
2015-01-05
: Craftsman Craftsman-900-74522-Users-Manual-161233 craftsman-900-74522-users-manual-161233 craftsman pdf
Open the PDF directly: View PDF .
Page Count: 7
Download | |
Open PDF In Browser | View PDF |
Instruction Manual JCRRF'rSMHN'J 12" TRIMMER/EDGER Model 900.74522 • Safety & CAUTION: Before using this product, read this manual and follow all its Safety Rules and Operating Instructions. Sears, Roebuck and Co., Hoffman • Operation • Maintenance • Parts List • EspaSol Estates, IL 60179 U.S.A. www.sears.com/craftsman Form No. 244468-00 NOV. '02 Printed in U.S.A. Switc Cord Retainer Auxiliary Conve_ion Handle_ Bu_on 5uard Edge FULL Hub & Cap ONE YEAR If this Craftsman WARRANTY ON CRAFTSMAN TRiMMER/EDGER product fails due to a defect in material or workmanship within one year from the date of purchase, return it to your nearest Sears store or Craftsman outlet to have it replaced free of charge. This warranty applies only while this product is used in the United State_. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co., Dept. 617WA, Hoffman Estates, IL 60179 TO REDUCE RISK OF INJURY: • Before any use, be sure everyone using this tool reads and understands all safety instructions and other information contained in this manual. • Save these instructions and review frequently prior to use and in instructing others. • AVOID DANGEROUS ENVIRONMENT. Don't use appliances in damp or wet locations. Don't use appliances in the rain. • KEEP CHILDREN AWAY. All visitors should be kept at a distance from work area. • STORE IDLE APPLIANCES INDOORS. When not in use, appliances should be stored indoors in dry, and AWARNING: When using electric gardening appliances, basic safety precautions should always be followed to reduce risk of fire, electric shock, and personal injury, including the following: READ ALL INSTRUCTIONS, high or locked-up place - out of reach of children. DON'T FORCE APPLIANCE. It will do the job better and with less likelihood of a risk of injury at the rate for which it was designed, USE RIGHT APPLIANCE. Do not use the appliance for any job except that for which it is intended. • DRESS PROPERLY. Do not wear loose other part that is damaged should be carefully checked to determine that it will clothing or jewelry. They can be caught operate properly and perform its in moving parts. Rubber gloves and substantial, non-skid footwear are intended function. Check for alignment of recommended when working outdoors. moving parts, binding of moving parts, breakage of parts, mounting and any Wear protective hair covering to contain long hair. other conditions that may affect its • USE SAFETY GLASSES AND OTHER operation. A guard or other part that is SAFETY EQUIPMENT. Use safety damaged should be properly repaired or replaced by a qualified service facility goggles or safety glasses with side unless otherwise indicated elsewhere in shields, complying with applicable safety this manual. standards and, when needed, a face shield. Also use face or dust mask if • USE OFACCESSORIESAND operation is dusty. This applies to all ATrACHMENTS. The use of any persons in the work area. Also use a accessory or attachment not hard hat, hearing protection, gloves, recommended for use with this appliance could be hazardous. Note: Refer to the safety shoes and dust collection systems when specified or required. accessory section of this manual for further details. Safety glasses are available at a Sears store. • EXTENSION CORDS. Make sure your • DON'TABUSE CORD. Never carry extension cord is in good condition. appliance by cord or yank it to disconnect When using an extension cord, be sure from receptacle. Keep cord from heat, oil, to use one heavy enough to carry the and sharp edges. current your product will draw. An undersized extension cord will cause a • DON'T OVERREACH. Keep proper drop in line voltage resulting in loss of footing and balance at all times.' power and overheating. The table below • MAINTAIN APPLIANCE WITH CARE. shows the correct size to use depending Keep cutting edge sharp and clean f6r on cord length and nameplate ampere best performance and to reduce the risk rating. If in doubt, use the next heavier of injury. Follow instructions for gauge. The smaller the gauge number, lubricating and changing accessories. the heavier the cord. To reduce the risk of Inspect appliance cord periodically and if disconnection of the appliance from the damaged, have it repaired by a qualified extension cord during operation, use the service facility. Inspect extension cords extension cord retainer located on the periodically and replace if damaged. upper trimmer/edger handle. Keep handles dry, clean, and free from oil and grease. Minimum Gage for Extension Cords (AWG) • DISCONNECT APPLIANCES. 120 VAC Tools Disconnect the appliance from the power TotalCord Length 0-25 26-50 51-100 106-150 supply when not in use, before servicing, Amp Rating AWG AWG AWG AWG and when changing accessories such as More than 0 18 16 16 14 blades and the like. Not More than 6 • AVOID UNINTENTIONAL STARTING. More than 6 18 16 14 12 Don't carry plugged-in appliance with Not More than 10 finger on switch. Be sure switch is off More than 10 16 16 14 12 when plugging in. Not more than 12 • GROUND FAULT CIRCUIT Morethan 12 I t4 12 Not INTERRUPTER (GFCI) protection Not more than 16 I Recommended should be provided on the circuits or outlets to be used for the gardening appliance. Receptacles are available _,WARNING: having built in GFCI protection and may Outdoor use extension cords: be used for this measure of safety. To reduce the risk of electric shock, use • STAY ALERT. Watch what you are doing. only with an extension cord intended for Use common sense, Do not operate outdoor use, such as an extension cord appliance when you are tired. of type SW-A, SOW-A, STW-A, • CHECK DAMAGED PARTS. Before STOW-A, SJW-A, SJOW-A, SJTWoA, or further use of the appliance, a guard or SJTOW-A. 3 • The guard must be installed before trimming or edging - if not, the motor will overheat. • When replacing the line, use .065" diameter ROUND line - otherwise the unit may not function properly. • Angle tool slightly (5 ° to 10") when trimming. • Always use the cord retainer. • Wear long pants and substantial footwear to protect yourself from injury caused by flying debds. This is especially important when edging with the appliance. DOUBLE INSULATION Double insulated tools are constructed throughout with two separate layers of electrical insulation or one double thickness of insulation between you and the tool's electdcal system. Tools built with this insulation system are not intended to be grounded. As a result, your tool is equipped with a two prong plug which permits you to usa extension cords without concern for maintaining a ground connection. NOTE: Double insulation does not take the place of normal safety predautions when operating this tool. The insulation system is for added protection agaihst injury resulting from a possible electrical insulation failure within the tool. REPLACEMENT PARTS: When servicing all tools, USE IDENTICAL REPLACEMENT PARTS. POLARIZED receptacle end of the extension cord has large and small blade slot widths. If the plug does not fit fully into the extension cord, reverse the plug. If it still does not fit, obtain a suitable extension cord. If the extension cord does not fit fully into the -:' outlet, contact a qualified electrician to install the proper outleL Do not change the tool plug or extension cord in any way. SPECIFIC WARNING &WARNING: Some dust created by this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm • • . Some examples of these chemicals are: • compounds in fertilizers • compounds in insecticides, herbicides and pesticides • arsenic and chromium from chemically treated lumber To reduce your exposure to these chemicals, wear approved safety equipment such as dust masks that are specially designed to filter out microscopic particles. PLUGS Repair or replace damaged cords. To reduce the dsk of electric shock, this equipment has a polarized plug (one blade is wider than the other). This equipment must be used with a suitable polarized 2 wire or 3 wire extension cord. Polarized connections will fit together only one way. Make sure that the t, WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. ATTACHING THE GUARD AND EDGE GUIDE TO THE TRIMMER/EDGER 3. Slip the guard onto the trimmer housing and line up screw holes+ Make sure that it fits onto the mounting shoulder and that the locking tabs on the guard fit into the two notches on the housing, as shown in Figure 3. 4. Insert the two screws from the plastic bag to secure the guard and edge guide in place as shown in Figure 4. 5. Attach extension cord to cord retainer as shown in Figures 5 & 6. &WARNING: The guard must always be on the tool to protect the user. NEVER OPERATE TOOL WITHOUT GUARD FIRMLY IN PLACE. Unplug the tool before attempting to attach the guard. 1. Spread the edge guide apart and locate it in the slot and hole as shown in Figure 1. 2. See Figure 2 for edge guide assembled on the trimmer. 4 O O @ O \ - L00LLN6 TAB LINE FEED AS you use the trimmer, the string will get shorter due to wear. Gently bump the hub on the ground and the line will feed. & CAUTION: ALWAYS WEAR EYE PROTECTION. &CAUTION: Inspect area to be trimmed and remove any wire, cord, or string-like objects which could become entangled in the rotating line or spool. Be particularly careful to avoid any wire which might be bent outwardly into the path of the tool, such as barbs at the base of a chain link fence. 0 1. Angle unit as shown in Figure 7. 2. Slowly swing trimmer side-to-side as shown in Figure 8. 3. To convert for maintenance edging (Figure 9) unplug from power source, depress conversion button and rotate the motor housing. When the button snaps back into place, the tool is rocked in the edger position. 4. To operate as a maintenance edger, position trimmer above sidewalk as shown in Figure 10. 5, Return to trimming position by unplugging tool, depressing the button and rotating back. 7 5 CUTTING LINE Your trimmer uses .065" (1.65 mm) diameter, ROUND nylon line to cut grass and weeds quickly and easily. During use, the tip of the nylon line will become frayed and worn. Bump the hub gently on the ground for a fresh feed of line. Cutting line will wear faster and require more feeding if the cutting or edging is done along sidewalks or other abrasive surfaces or heavier weeds are being cut. SPOOL OR LINE REPLACEMENT 1. Unplug the trimmer. 2. Press the retease tabs on the line hub cover, as shown in Figure 11. Remove the cover by pulling it straight off. 3. Remove the spool from the tool. Discard it if you plan to replace it. Remove and discard all line from it if you plan to rewind it with new line. 4. If you are rewinding the spool with new line, see "Rewinding Spool". If you are replacing the spool, use Craftsman replacement spool number 85680, available at Sears. 5. Insert the line end of the new or rewound spool through the eyelet in the spool hub, as shown in Figure 13. Pull on the line end to keep it taut ";, while placing the spool down into the hub, as shown in Figure 14. 6. Press the spool down GENTLY on the spring and rotate it until you feel it drop into place. Take care to keep the line from becoming trapped under the spool. 7. Snap the hub cap back on (Figure 14). Turn on the tool. You w|ll shortly hear the nylon line befng cu{ tO the proper length; if not, bump the hub gently on the ground for a fresh feed of line. CLEARING JAMS AND TANGLED LINES From time to time, especially when cutting thick or stalky weeds, the line feeding hub may become clogged with sap or other material and the tine will become jammed as a result. To clear the jam, follow the steps listed below. 1. Unplug the trimmer. 2. Press the release tabs on the hub cap, as shown in Figure 11 and remove the cap by pulling it straight off. 3. Lift the spool of nylon line out of the hub and clear any broken line or cutting debds from the spool area. See Figure 12. 4. Unwrap about one foot (30 cm) of line and inspect it for damage. Cut away and discard any damaged line. If line is okay rewind it and insert the line end through the eyelet in the spool hub as shown in Figure 13. Pull on the line end to keep it taut while placing the spool down into the hub, as shown in Figure 13. 5. Press the spool down GENTLY on the spring and rotate it until you feel it drop into place. Take care to keep the line from becoming trapped under the spool. 6. Snap the hub cap back on (Figure 14). Turn on the tool. You will shortly hear the nylon line being cut to the proper length; if not, bump the hub gently on the ground for a fresh feed of line. HUBCAP HUB N) ,, _..... _ CL_._HERE 6 PUSHDOWN REWINDING SPOOL Use .065" diameter ROUND line only. Do not use heavier gauge line; it will overload motor and cause overheating. 1. Insert line end about 118" into the spool hole as shown in Figures 15 and 16. 2. Snugly and evenly wind the line onto the spool in the direction of the arrow on the spool until the line builds up to the notches in the spool rim (Figure 17). Do not overfill spool. The spool holds about 20 feet of line. 3. Proceed to step 5 of =Spool or Line Replacement". INSERT LINEHERE ACCESSORIES • Replacement spool, Craftsman No. 85680. • 0,065" diamter ROUND nylon monofilament trimmer line. CLEANING AND STORAGE Be sure the tool is unplugged. 1. Keep the air intake slots (Figure 18) clean to avoid overheating. 2. Your trimmer line can dry out oyer time. To keep your line in top condition, store spare pre-wound spools or bulk line in a plastic, sealable bagwith tablespoon of water. 3. Plastic parts may be cleaned by using a mild soap and a damp rag. 4. DO NOT immerse tool in water or squirt it with a hose. DO NOT allow any liquid to get inside it. 5. Do not store the tool on or adjacent to fertilizers or chemicals. 6. DO NOT clean with a pressure washer. 7. The line cutter on the edge of the guard can dull over time. It is recommended you periodically touch-up the sharpness of the blade with a file. Model The above accesspry is available at your local Sears store or Sears service center. A, WARNING: The use of any accessory not sold by Sears for use with this tool could be hazardous. IMPORTANT: To assure product SAFETY AND RELIABILITY, repairs should be performed by a Sears or other qualified service facility, using only identical replacement parts. Conversion Button Air Intake Slots 7
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 7 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Tue Apr 03 18:50:15 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools