Craftsman Strut Spring Compressor Tool With Built In Safety Pins Owners Manual
2015-03-28
: Craftsman Craftsman-Strut-Spring-Compressor-Tool-With-Built-In-Safety-Pins-Owners-Manual-659776 craftsman-strut-spring-compressor-tool-with-built-in-safety-pins-owners-manual-659776 craftsman pdf
Open the PDF directly: View PDF
.
Page Count: 1
| Download | |
| Open PDF In Browser | View PDF |
MacPherson Strut Coil Spring Tool Model No. 47057 IMPORTANT: • Only use on MacPherson strut springs with coil wire diameters of .625 inch or less • Always use latch locking pins • Always wear protective eyewear • Follow all instructions Instructions for Use: The spring tool consists of two rod-and-latch assemblies. On each rod there is an upper and lower latch. The upper latch contains a locking pin. Lubricate the rod threads with 30W oil before each use. Retract the upper latch locking pins by pulling back on them. Hook the upper and lower latches over the top and bottom coils of the spring as shown. See Figure 1. Push in the locking pins to lock the upper latches onto the top coil of the spring. The two rod-and-latch assemblies should be attached exactly opposite each other on the spring. Begin compressing the spring by finger-tightening the bolts atop the upper latches on each side. After each side is snug, perform the rest of the tightening with a hand wrench or air wrench. Alternately tighten one side a short distance and then the other to assure equal compression on both sides. Keep tightening back and forth until the springs are sufficiently clear of the spring seats. See Figure 2. Now perform repairs on strut as necessary following the automotive manufacturer’s recommended procedures. Once repairs are complete and the tool-compressed spring is correctly positioned, alternately loosen the upper latch bolts equal short distances from one side to the other until the spring is fully decompressed. CAUTION: To avoid injury, do not remove locking pins from upper latches until spring is fully decompressed. FULL UNLIMITED WARRANTY If this Craftsman Hand Tool ever fails to provide complete satisfaction, return it to the nearest Sears store or Craftsman outlet and it will be replaced, free of charge. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00 Create Date : 2012:08:08 12:15:48-04:00 Metadata Date : 2012:08:08 12:15:51-04:00 Modify Date : 2012:08:08 12:15:51-04:00 Creator Tool : Adobe InDesign CS5 (7.0.4) Page Image Page Number : 1 Page Image Format : JPEG Page Image Width : 256 Page Image Height : 256 Page Image : (Binary data 12878 bytes, use -b option to extract) Instance ID : uuid:38186a8d-58b2-4a5b-a80d-2b57e4fefced Document ID : xmp.did:4DD491B165E1E1119A6CB3375E390651 Original Document ID : xmp.did:4DD491B165E1E1119A6CB3375E390651 Rendition Class : proof:pdf History Action : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:4DD491B165E1E1119A6CB3375E390651, xmp.iid:4ED491B165E1E1119A6CB3375E390651, xmp.iid:4FD491B165E1E1119A6CB3375E390651, xmp.iid:50D491B165E1E1119A6CB3375E390651, xmp.iid:51D491B165E1E1119A6CB3375E390651, xmp.iid:52D491B165E1E1119A6CB3375E390651, xmp.iid:53D491B165E1E1119A6CB3375E390651, xmp.iid:54D491B165E1E1119A6CB3375E390651, xmp.iid:55D491B165E1E1119A6CB3375E390651, xmp.iid:8DCDE56F73E1E1119A6CB3375E390651, xmp.iid:91CDE56F73E1E1119A6CB3375E390651, xmp.iid:95CDE56F73E1E1119A6CB3375E390651 History When : 2012:08:08 10:31:08-04:00, 2012:08:08 10:36:30-04:00, 2012:08:08 10:36:30-04:00, 2012:08:08 10:38:33-04:00, 2012:08:08 11:32-04:00, 2012:08:08 11:32:36-04:00, 2012:08:08 11:33:22-04:00, 2012:08:08 11:35:27-04:00, 2012:08:08 11:39:35-04:00, 2012:08:08 12:09:31-04:00, 2012:08:08 12:11:38-04:00, 2012:08:08 12:15:04-04:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Doc Change Count : 152 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 1 Creator : Adobe InDesign CS5 (7.0.4)EXIF Metadata provided by EXIF.tools