Crane Payment Innovations 4IN1TCORE RFID Credit Card Bezel for CPI Bill Acceptors User Manual Combo Bezel Installation Guide

Crane Payment Innovations RFID Credit Card Bezel for CPI Bill Acceptors Combo Bezel Installation Guide

Users Manual

VN2000 Bill Acceptor ComboFront, Side & 4 in 1 Bezel KitInstallation GuideGeneral InformationThe combo bezel kit has been designed to add a credit cardsreader to a Series 2000 bill acceptors.The combo bezel replaces the compact bezel.To remove the compact bezel:1. Remove four phillips screws (A) located on the front of thebill acceptor. Remove the bezel and mounting plate.Combo bezel installation2. Place the combo bezel on the bill acceptor and install the four screws.Be cautious not to pinch or damage the bezel cable when installing the combo bezel.Front Swipe Side Swipe 4 in 1Contact our Technical Support @ 1-800-345-8172 with any questions.Notes:CAUTION: changes or modifications not expressly approved by the party responsible for compliancecould void the user’s authority to operate the equipment.This device complies with part 15 of the FCC rules. Operation is subject to the following twoconditions: (a) This device may not cause harmful interference, and (b) this device must accept anyinterference received, including interference that may cause undesired operation.©2019 CPI www.cranePI.comPart # 250054258 Revision G4*See notes below

Navigation menu