Crate Amplifiers Xt15R Users Manual

: Crate-Amplifiers Crate-Amplifiers-Xt15R-Users-Manual-424485 crate-amplifiers-xt15r-users-manual-424485 crate-amplifiers pdf

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

XT15R

XT15R
Guitar Amplifier

User’s Guide

XT15R

Guitar Amplifier

Congratulations!
You are now the proud owner of the Crate XT15R Guitar Amplifier. This
rugged amplifier combines outstanding features with serious clean and distorted sounds. A Reverb control is provided for greater flexibility. RCA Input
jacks allow connection of a CD or tape player for playing along with your
favorite music, and the Headphones jack lets you practice in private.
Like all Crate products, your XT amplifier is designed by musicians, and
built using only the best components. Extensive testing confirms that this
amplifier is the absolute best it can be.
In order to get the most out of your new amplifier, we strongly urge you
to read the information contained in this manual before you begin playing.
And thank you for choosing CRATE.

CAUTION

PRECAUCION

ATTENTION

RISK OF ELECTRIC SHOCK
DO NOT OPEN

RIESGO DE CORRIENTAZO
NO ABRA

RISQUE D'ELECTROCUTION
NE PAS OUVRIR

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

PRECAUCION: PARA REDUCIR EL RIESGO DE INCENDIOS O DESCARGAS
ELECTRICAS, NO PERMITA QUE ESTE APARATO QUEDE EXPUESTO A LA
LLUVIA O LA HUMEDAD. PARA DISMINUOIR EL RIESGO DE CORRIENTAZO.
NO ABRA LA CUBIERTA. NO HAY PIEZAS ADENTRO QUE EL USARIO PUEDO
REPARAR DEJE TODO MANTENIMIENTO A LOS TECHNICOS CALIFICADOS.

ATTENTION: PROTÉGEZ CET APPAREIL DE LA PLUIE ET DE L'HUMIDITÉ
AFIN D'ÉVITER TOUT RISQUE D'INCENDIE OU D'ÉLECTROCUTION. POUR
REDUIRE D'ELECTROCUTION NE PAS ENLEVER LE COUVERCLE. AUCUNE
PIECE INTERNE N'EST REPRABLE PAR L'UTILISATEUR. POUR TOUTE
REPARATION, S'ADRESSER A UN TECHNICIEN QUALIFIE.

IMPORTANT SAFETY INSTRUCTIONS
• READ, FOLLOW, HEED, AND KEEP ALL INSTRUCTIONS AND WARNINGS.
• DO NOT OPERATE NEAR ANY HEAT SOURCE AND DO NOT BLOCK ANY VENTILATION OPENINGS ON THIS APPARATUS. FOR
•
•
•
•
•
•
•
•
•

PROPER OPERATION, THIS UNIT REQUIRES 3” (75mm) OF WELL VENTILATED SPACE AROUND HEATSINKS AND OTHER AIR
FLOW PROVISIONS IN THE CABINET.
DO NOT USE THIS APPARATUS NEAR SPLASHING, FALLING, SPRAYING, OR STANDING LIQUIDS.
CLEAN ONLY WITH LINT-FREE DAMP CLOTH AND DO NOT USE CLEANING AGENTS.
ONLY CONNECT POWER CORD TO A POLARIZED, SAFETY GROUNDED OUTLET WIRED TO CURRENT ELECTRICAL CODES AND
COMPATIBLE WITH VOLTAGE, POWER, AND FREQUENCY REQUIREMENTS STATED ON THE REAR PANEL OF THE APPARATUS.
PROTECT THE POWER CORD FROM DAMAGE DUE TO BEING WALKED ON, PINCHED, OR STRAINED.
UNPLUG THE APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME.
ONLY USE ATTACHMENTS, ACCESSORIES, STANDS, OR BRACKETS SPECIFIED BY THE MANUFACTURER FOR
SAFE OPERATION AND TO AVOID INJURY.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
SERVICE MUST BE PERFORMED BY QUALIFIED PERSONNEL.
OUR AMPLIFIERS ARE CAPABLE OF PRODUCING HIGH SOUND PRESSURE LEVELS. CONTINUED EXPOSURE TO HIGH SOUND
PRESSURE LEVELS CAN CAUSE PERMANENT HEARING IMPAIRMENT OR LOSS. USER CAUTION IS ADVISED AND EAR PROTECTION IS RECOMMENDED IF UNIT IS OPERATED AT HIGH VOLUME.
EXPLANATION OF GRAPHICAL SYMBOLS:
EXPLICACION DE SIMBOLOS GRAFICOS:
EXPLICATION DES SYMBÔLES GRAPHIQUES:

"DANGEROUS VOLTAGE"

=

“VOLTAJE PELIGROSO”
"DANGER HAUTE TENSION"

"IT IS NECESSARY FOR THE USER TO REFER TO THE INSTRUCTION MANUAL"

=

“ES NECESARIO QUE EL USUARIO SE REFIERA AL MANUAL DE INSTRUCCIONES.”
"REFERREZ-VOUS AU MANUAL D'UTILISATION"

XT15R

Guitar Amplifier

The Front Panel:

1

2

3

4

5

6

1: INPUT: Use this jack to connect your guitar
to the amplifier by means of a shielded instrument cable.
SOLO CHANNEL: A high gain channel giving
you sounds from a slight edge to serious overdrive.
2: GAIN: Use this control to adjust the amount
of distortion for the Solo channel.
3: LEVEL: Use this control to adjust the output
level of the Solo channel.
4: SOLO/CLEAN: Use this switch to select the
Solo or Clean channel. With the switch in the
out position, the Clean channel is selected.
When the switch is depressed, the Solo channel is selected.
CLEAN CHANNEL: A normal gain channel
designed to give you crystal clear sounds to
medium distortion.
5: VOL: Use this control to adjust the output
level of the Clean channel.
6: LOW: Use this control to adjust the low frequency level of the amplifier.
7: MID: Use this control to adjust the midrange
frequency level of the amplifier.
8: HIGH: Use this control to adjust the high frequency level of the amplifier.
9. REV LEVEL: Use this control to adjust the
level of reverb effect.
10: CD INPUT: Use these RCA jacks to connect
the output from a CD player or tape deck to the
amplifier. The signal at these jacks is combined

7

8

9

10

11

12

13

into a mono signal which is sent to the internal
power amp circuit. Use the CD or tape player’s
output level control to adjust the signal for the
proper mix with your guitar.
11: HEADPHONES: Use this jack to connect
headphones to the amplifier. The internal
speaker is disconnected when headphones are
used.
CAUTION: To avoid possible damage to your
hearing, do not use headphones for extended
periods of time at extremely loud levels.

12: SPEAKER: Use this jack to connect the
amplifier to an external speaker. The internal
speaker is disconnected when this jack is used.
The impedance of the external speaker must be
4 ohms or greater.
WARNING: Do not attempt to use headphones in
the Speaker jack! Permanent hearing damage
could result!

13: POWER: Use this switch to turn the amplifier on (top of the switch depressed) and off
(bottom of the switch depressed). The switch
illuminates when the amplifier is turned on.
The Rear Panel (not shown):
14: POWER CORD: The grounded power cord
should only be plugged into a grounded power
outlet that meets all applicable electrical codes
and is compatible with the voltage, power, and
frequency requirements stated on the rear
panel. Do not attempt to defeat the safety
ground connection.

XT15R

Guitar Amplifier

XT15R TECHNICAL SPECIFICATIONS:
Output Power Rating
Gain

12W RMS @ 5% THD, 4Ω, 120 VAC
Solo Ch
Clean Ch

86dB +/-6dB @ 1kHz
46dB +/-6dB @ 1kHz

CD Input

26dB +/-2dB

Maximum Input Signal Accepted

2.2 volts RMS min. @ 400Hz

Tone Controls

Low
Mid
High

25dB range @ 80Hz
19dB range @ 900Hz
23dB range @ 10kHz

Speaker Size and Rating

8” Crate Custom Design 4 ohm

Power Requirements

120 VAC, 60Hz, 30VA
100/115VAC, 50/60Hz, 30VA
230VAC, 50/60Hz, 30VA

Size and Weight

13” H x 13-5/8” W x 8-1/4” D, 15 lbs.

The XT15R is covered with a durable Tolex material: wipe it clean with a lint-free cloth.
Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.
Crate continually develops new products, as well as improves existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.

www.crateamps.com
©2003 SLM Electronics, a division of St. Louis Music, Inc • 1400 Ferguson Avenue • St. Louis, MO 63133
18-762-01 • 06/17/03



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2003:07:03 10:22:43
Producer                        : Acrobat Distiller 4.05 for Macintosh
Modify Date                     : 2003:07:03 10:22:49-05:00
Page Count                      : 4

EXIF Metadata provided by EXIF.tools