Crate Barrel 297 Boulevard Four Drawer Chest Assembly Instructions From And

: Crate-Barrel 297-Boulevard-Four-Drawer-Chest 297-boulevard-four-drawer-chest crate-barrel pdf

Open the PDF directly: View PDF .
Page Count: 5

Customer Service 800-967-6696 | http://www.crateandbarrel.com

BOULEVARD 4 DRAWER CHEST

HARDWARE

TOOLS REQUIRED

Phillips head screwdriver

COMPONENTS

Made in China 2004

Page 1 of 5

Thank you for purchasing the Boulevard 4 drawer chest.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

1 - back panel 1 - leg base

2 - side

panels

1 - top panel

2 - small

drawer backs

4 - small

drawer sides

4 - drawer

bottoms

2 - small

drawer fronts

19 - small

flat washers

2 - large

drawer backs

4 - large

drawer sides

2 - large

drawer fronts

8 - large

flat washers

1 - bottom panel

(Pilot holes on the underside)

4 - legs

4 - metal pulls

4 - drawer

supports

4 - long

wood screws

8 - oval

head screws

48 - short

wood screws

19 - short

machine screws

8 - long

machine screws

1- middle

panel

27 - spring

washers

2 - wood

dowels

Customer Service 800-967-6696 | http://www.crateandbarrel.com

BOULEVARD 4 DRAWER CHEST

Made in China 2004

Page 2 of 5

3 Fit dowels of middle panel and back panel into

corresponding holes and slot in right side panel. Secure

with 2 short machine screws, 2 split washers and

2 small washers.

4 Fit bottom panel onto dowels in side panels and

bottom of back panel. Secure with 4 long wood screws.

1 Attach middle panel to left side panel with 2 short

machine screws, 2 spring washers and 2 small flat

washers. Tighten with a phillips head screwdriver.

2 With the assistance of another adult, slide the back

panel into the slot at the rear of the side panel.

Make sure the

wheels face forward

and the slot is at

back of the

side panel

x 2

x 2

Customer Service 800-967-6696 | http://www.crateandbarrel.com

BOULEVARD 4 DRAWER CHEST

Made in China 2004

Page 3 of 5

8 • Place top panel into position, fitting dowels in side

panels into corresponding holes in the top. Secure top with

6 short machine screws, 6 spring washers, and 6 small

flat washers.

• Secure back panel to bottom with 2 short machine

screws, 2 spring washers and 2 small flat washers.

5 • Insert 2 wood dowels into top of base frame.

• Insert 7 short machine screws, 7 spring washers and

7 small flat washers through the holes in base frame and

align with threaded holes in the underside of the the bottom

panel. Secure screws with a screwdriver.

6 Secure 4 legs to base frame with 8 long machine

screws, 8 spring washers and 8 large flat washers.

x 6

x 2

x 7

7 With the assistance of another adult, place the case

assembly in an upright position.

B

A

x 8

NOTE:

Make sure label on

base frame faces upward.

Customer Service 800-967-6696 | http://www.crateandbarrel.com

BOULEVARD 4 DRAWER CHEST

Made in China 2004

Page 4 of 5

12 Attach metal pulls to the small and large drawer faces

using 2 oval head screws per drawer.

11 Fit the remaining small and large drawer side panels

into position, securing with 4 short wood screws per panel.

9 Using 4 short wood screws per panel, attach the

small and large drawer sides to the small and

large front and backs.

10 Slide 4 drawer bottoms into the slots at the base of the

drawer side, front and back panels.

Make sure the wheels of the

drawer slides face out and

towards the back

Customer Service 800-967-6696 | http://www.crateandbarrel.com

BOULEVARD 4 DRAWER CHEST

Made in China 2004

Page 5 of 5

15 Assembly is now complete.

CLEANING AND CARE

Clean wood surfaces with a damp cloth. Do not use

furniture wax or polish as the wood is finished with a

protective clear lacquer.

13 Turn all the drawers upside down. Attach 1 drawer

support to the bottom of each drawer with 4 short wood

screws. Repeat for the remaining 3 drawers.

14 Insert drawers into the case, fitting wheels on drawer

assemblies into the metal tracks of the case drawer slides.

Assembly is now complete.