Crate Barrel 430 Drake Desk

: Crate-Barrel 430-Drake-Desk 430-drake-desk crate-barrel pdf

Open the PDF directly: View PDF .
Page Count: 2

HARDWARE

TOOLS REQUIRED

COMPONENTS

1 A) Insert 2 cams and 2 wood dowels into crossbar as

shown. Make sure arrows on each cam points toward

nearest edge with holes.

B) Insert 1 cam screw and 2 wood dowels into left and

right side panels. Secure cam screws, but do not over

tighten, with a phillips head screwdriver.

Made in China - r04 Page 1 of 2

Thank you for purchasing the Drake Desk. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and

prepare for assembly, place the contents on a carpeted

or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

DRAKE DESK

Missing hardware? Please call 800.606.6387 for replacements.

6 - wood

dowels

3 - screws

NOTE: Do not over

tighten the cam screw

2 - side frames

(1 left, 1 right)

6 - bolts 2 - cam

screws

4 - pads 6 - flat

washers

6 - spring

washers

2 - cams

1 - crossbar

1 - desktop

assembly

1 - glass

panel

A

B

2 - metal

braces

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

phillips head screwdriver

allen wrench (included)

(We recommend the use of hand tools instead of power tools)

Made in China - r04 Page 2 of 2

DRAKE DESK

CLEANING & CARE

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners. Do not use furniture wax or polish as the

unit is finished with a protective clear lacquer.

2 A) With assistance of another adult, fit dowels of left

side panel into desktop as shown. Secure with 3

bolts, 3 spring washers and 3 flat washers, using an

allen wrench. Do not over tighten the bolts.

B) Fit dowel of crossbar into left side panel as shown.

Using a screwdriver, turn cam clockwise until it

securely engages cam screw.

3 A) Fit dowels of right side panel into desktop as

shown. Secure with 3 bolts, 3 spring washers and 3

flat washers, using an allen wrench.

B) Fit dowel of crossbar into right side panel as

shown. Secure cam.

4 Attach 2 metal braces to desk assembly as shown

with 3 screws. Secure, but do not over tighten, with a

screwdriver. With the assistance of another adult,

position unit upright.

5 A) Adhere 4 pads to each corner of desk assembly

as shown.

B) With the assistance of another adult, carefully place

glass top onto desk assembly. Make sure glass top is

securely supported by pads.

Assembly is now complete.

A

B

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

ABB

A

B

A

NOTE: Do not over

tighten the bolts

NOTE: Do not over

tighten the screws

Make sure

hole on

crossbar is

facing up

during

assembly