Crate Barrel 624 Loop Three Drawer Chest Assembly Instructions From And
2014-07-05
: Crate-Barrel 624-Loop-Three-Drawer-Chest 624-loop-three-drawer-chest crate-barrel pdf
Open the PDF directly: View PDF .
Page Count: 4

HARDWARE
TOOLS REQUIRED
COMPONENTS
Made in China r08 Page 1 of 4
Thank you for purchasing the Loop 3 Drawer Chest.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
NOTE: 2 people are required to safely assemble this
product.
LOOP 3 DRAWER CHEST
Missing hardware? Please call 800.606.6387 for replacements.
17 - cam
screws
6- silver
screws
9 - black
screws
12 - wood
dowels
17 - cam
covers
17 - cams
3 - pulls
12 - glide
screws
Phillips Head Screwdriver
Customer Service 800.967.6696 | www.crateandbarrel.com
1 - top panel
2 - side frames
(1 left, 1 right)
1 - crossbar
3 - drawer fronts
1 - back panel
3 - drawer backs
6 - drawer sides
(3 right , 3 left)
3 - drawer bottoms

Made in China r08 Page 2 of 4
3 With the assistance of another adult, carefully align
dowels of back panel and crossbar with cam screws of left
side frame and firmly fit into position.
4 Secure 4 cams at the base of the back panel and cross-
bar with a phillips head screwdriver. Turn each cam clock-
wise until it securely engages each cam screw.
LOOP 3 DRAWER CHEST
1 A) Place left side panel face down on a padded surface.
Insert 4 cam screws into the holes as shown. Secure, but do
not over tighten with a phillips head screwdriver.
B) Insert 3 cams into the large holes as shown, making sure
the arrow on each cam points towards the nearest edge with
holes.
C) Insert 2 wood dowels into the top edge of the panel.
Repeat Steps A, B & C for the right side panel.
2 A) Insert 6 wood dowels and 9 cams into back panel as
shown.
B) Insert 2 wood dowels and 2 cams into crossbar as shown.
Back Panel
Crossbar
Arrow on each
cam points towards
edge with holes
A
B
Cam in
unlocked
position
Cam in
locked
position
A
B
C
Customer Service 800.967.6696 | www.crateandbarrel.com

Made in China r08 Page 3 of 4
7 Fit top panel onto dowels of the assembly and secure
each cam with a phillips head screwdriver.
8 Slide left and right drawer sides up into slots on back of
the drawer front. Make sure glide hardware is on the outside
of the drawer sides and the vertical slots are at the back of
the assembly as shown.
LOOP 3 DRAWER CHEST
5 Fit cam screws of right side panel into corresponding
holes in the back panel and crossbar. Secure each cam with
a phillips head screwdriver.
6 Insert 9 cam screws into the underside of the top panel
as shown.
Customer Service 800.967.6696 | www.crateandbarrel.com

Made in China r08 Page 4 of 4
11 A) Secure underside of drawer bottom to drawer back
with 3 black screws. Secure, but do not over tighten with
the phillips head screwdriver.
B) Fit drawer pull into position as shown and secure with 2
silver screws.
Repeat Steps 8 - 11 for remaining 2 drawers.
12 A) Fully extend drawer glides from assembled unit as
shown.
B) Position drawer assembly and rest the drawer assembly
on top of the tabs as shown. Attach each glide to drawer with
2 glide screws as shown. Secure with a screwdriver. Repeat
steps for each drawer.
C) Conceal all exposed cams with cam covers.
Assembly is now complete.
LOOP 3 DRAWER CHEST
9 Slide drawer back into vertical slots at rear of drawer
sides.
10 Slide drawer bottom into slot at base of drawer sides
and drawer front. Make sure pilot holes are at the back of the
drawer bottom as shown.
These holes at back
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
B
A
A
B
B
C
Customer Service 800.967.6696 | www.crateandbarrel.com