Crate Barrel 719 Nielsen Extension Dining Table Assembly Instructions From And

: Crate-Barrel 719-Nielsen-Extension-Dining-Table 719-nielsen-extension-dining-table crate-barrel pdf

Open the PDF directly: View PDF .
Page Count: 2

Customer Service 800-967-6696 | http://www.crateandbarrel.com

1 Place the table top assembly upside down on a clean,

padded surface. Place legs into position, aligning hole of

leg with hole in the metal corner bracket. Secure each leg to

table top with 1 washer and 1 bolt. Fully tighten with hex

wrench provided.

Assembly is now complete.

NIELSEN EXTENSION DINING TABLE

HARDWARE

TOOLS REQUIRED

Hex wrench (included)

COMPONENTS

Made in Denmark - r04

Page 1 of 2

4 - washers

1 - table top

assembly

4 - legs

x 4

Missing hardware? Please call 800.606.6387 for

replacements.

Thank you for purchasing the Nielsen Extension Dining

Table. This page lists all the contents included in the

box. Please take time to identify the hardware as well as

the individual components of this product. As you

unpack and prepare for assembly, place the contents on

a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this

product.

4 - bolts

Customer Service 800-967-6696 | http://www.crateandbarrel.com

NIELSEN EXTENSION DINING TABLE

Page 2 of 2

EXTENSION LEAF OPERATION

Made in Denmark - r04

3 Repeat for the remaining leaf.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners. Do not use furniture wax or polish as the

wood is finished with a protective clear lacquer.

2 Grasp finger pull on underside of table top and pull out extension leaf. As you pull the leaf, it will move upwards

to be flush with the surface of the tabletop.

EXTENSION LEAF STORAGE

4 A. Lift up table top slightly at each end to take the weight

off the extension leaf.

B. Slide leaf back into position under table top.

A

B

A

B

A

A