Creative Labs AVGSB1310 Wireless Slot Card User Manual Recon3D Omega

Creative Labs Inc Wireless Slot Card Recon3D Omega

User Manual

Congratulations!Prepare to experience the power of Sound Core3D™ hardware accelerated gaming audio. A new era in gaming audio is here as amazing audio processing power previously available only in internal PC audio card solutions is now transformed into a stylish and powerful wireless gaming audio system for your Xbox® 360, Playstation® 3, PC or Mac®. THX® TruStudio Pro™ greatly enhances ordinary gaming audio with 3D surround while CrystalVoice™ powers online voice communications.System RequirementsMinimum Requirements for Xbox 360 and PS3• Available USB 1.1 or 2.0 portMinimum Requirements for PC and Mac• 512MB RAM• 600 MB of free hard disk space• Available USB 1.1 or 2.0 portFor Windows•Microsoft® Windows® 7 32-bit or 64-bit, Windows Vista® 32-bit or 64-bit with Service Pack 1 or higher•Intel® Pentium® 4 or AMD® equivalent processor, 1.6 GHz or faster• Intel, AMD or 100% compatible motherboard chipsetFor Mac•Mac OS® X 10.5 or higher• Intel Core™ Duo processor, 1.6 GHz or fasterRecommended Requirements• Intel Core 2 Duo or AMD equivalent processor, 2.0 GHz or faster• 1 GB RAMNOTE Due to programming changes, the recommended system requirements for the software may change over time.
About Your Audio DeviceBBSCOUTMODEMUTECONNECTwireless cardusbOPTICAL IN/AUX INMICHIGH MIDLOWSCOUTMODECONNECTMODEPCXBOXPS3Sound Blaster Recon3D Omega WirelessMicro-USB-to-USB cablePS3/XBOX/PC Mode switchConnect LED buttonMicrophone jackVolume Control buttonsAudio output jackMicro-USB port for powerOptical cableInline volume control for Xbox 360Microphone Gain switchAnalog/Digital input combo jackSlot for Tactic Link wireless cardTHX TruStudio Pro buttonScout Mode buttonStatus LEDVolume Control dialMic Mute switchTactic Link wireless cardNoise-canceling microphoneAdjustable headbandMicrophone jackReset buttonMicrophone Mute LED buttonVoice input jack for Xbox 360Micro-USB port for chargingPower LED buttonVolume Control buttonsInstallation CD
Setting Up Your Audio DeviceStep 1: Insert the wireless card into the audio deviceNOTE • Insert the wireless card before powering up the audio device. Do not insert or remove the wireless card while the audio device is on.• Your headset and wireless transmitter are paired together and are ready to use. The Connect LED on the audio device and headset will light up blue. If you wish to pair them manually, refer to Using the Wireless Features.• While the wireless headset is turned on, audio will be played back through the headset instead of the headphone jack on the audio device.SCOUTMODEMUTECONNECTwireless cardusbOPTICAL IN/AUX INMICHIGH MIDLOWSCOUTMODEMUTECONNECTusbOPTICAL IN/AUX INMICHIGH MIDLOW
Step 2: Charge your headsetWhen using your headset for the first time, you should charge the headset for at least 5 hours. Connect your headset to the computer or console and turn off the headset while charging. The Power LED flashes red when charging, and lights up red when fully charged.
For PC/MacYour audio device can be used without installing any software. However to enjoy the full features of your audio device such as THX TruStudio Pro and CrystalVoice enhancements, we recommend you to install the drivers and applications for it by following the steps below.NOTE • Slide the Mode switch on the audio device to PC.• If prompted for the audio drivers, click the Cancel button.SCOUTMODEMUTECONNECTusbOPTICAL IN/AUX INMICHIGH MIDLOWps3 xbox pc
Step 3: Install the softwareFor all supported Windows OS1Insert the Installation CD into the CD or DVD drive. Your CD should start automatically. If it does not, follow the steps below:i. Click Start My Computer.ii. Right-click the CD or DVD drive icon, then click Open Autoplay or Autoplay.2To complete the installation, follow the instructions on the screen.3When prompted, restart your computer.You can launch the application by clicking Start Programs or All Programs Creative Sound Blaster Recon3D Sound Blaster Recon3D Control Panel.For Mac OS1Insert the Installation CD into the CD or DVD drive.2Double-click the <SB_INSTALL> icon.3Double-click the <Install> icon.4To complete the installation, follow the instructions on the screen.You can launch the Sound Blaster Recon3D Control Panel from the Applications\Creative\Sound Blaster Recon3D folder.Step 4: Set the default audio device (For Mac OS only)1Go to System Preferences, then click Sound.2Click the Output tab, then select Sound Blaster Recon3D.3Click the Input tab, then select Sound Blaster Recon3D.
For Xbox 360From the main menu, navigate to System Settings Console Settings Audio Digital Output, then select Dolby Digital 5.1.Press the Xbox Guide button on your controller. From the menu, navigate to Settings Preferences Voice Voice Output, then select Play Through Both.NOTE Slide the Mode switch on the audio device to Xbox.SCOUTMODEMUTECONNECTusbOPTICAL IN/AUX INMICHIGH MIDLOWps3 xbox pc
For Playstation 3From the main menu, navigate to Settings Sound Settings Audio Output Settings, then select Optical.From the main menu, navigate to Audio Multi-Output, then select On.From the main menu, naivgate to Accessory Settings Audio Device Settings, then change both Input Device and Output Device to Sound Blaster Recon3D.NOTE • Slide the Mode switch on the audio device to PS3.• If you are using the audio extension cable, slide the Mode switch on it to PS3.SCOUTMODEMUTECONNECTusbOPTICAL IN/AUX INMICHIGH MIDLOWps3 xbox pc
Using the HeadsetTurn on/off the headsetPress and hold the headset’s Power button for three seconds to turn it on/off. The Power LED lights up blue when the headset is turned on.Put on the headsetAdjust the headband so that the headset rests lightly on your head. Do not tighten excessively.Setting the volue levelIn general, you should set the playback volume on the console to the maximum, and use the volume controls on the audio device or headset to adjust the loudness to your desired level. However, if the sound distorts, lower the playback volume to avoid overloading the audio circuits.CAUTION Adjust headset volume to a comfortable level. Do not listen to audio on your headset at high volumes for prolonged periods of time as hearing loss might result.
Low power notificationWhen your headset is running low on power, the Power LED will turn red and the headset will emit a beeping sound.Using your headset while chargingYou can continue to use your headset even while it charges. The Power LED flashes blue while charging and lights up blue when fully charged.
Your Audio Device FeaturesTurn on/off THX TruStudio ProPress to turn THX TruStudio Pro effects on or off.Turn on/off Scout ModePress to turn Scout Mode on or off.Adjust Microphone GainSlide the Microphone Gain switch to Mid or High if you find that your voice input is too soft.Dolby Digital DecodingIf a Dolby Digital audio stream is detected by Sound Blaster Recon3D, the Status LED will light up blue.NOTE Scout Mode will be turned off while THX TruStudio Pro is on.NOTE Scout Mode will be turned off while THX TruStudio Pro is on.SCOUTMODEMUTESCOUTMODESCOUTMODEMUTElow mid highMIC
Using the Wireless FeaturesThe wireless capability gives you the convenience and freedom to move around up to a distance of 30 feet (10 meters) away from the transmitter. Your headset and wireless transmitter are paired together and are ready to use. If you wish to pair them manually, follow the steps below.Step 1: Activate pairing mode on the audio devicePress and hold the audio device’s Connect LED button for three seconds. It will then begin flashing blue.Step 2: Activate pairing mode on the headsetPress and hold the headset’s Microphone Mute button for three seconds. The Connect LED will then begin flashing blue.CONNECTCONNECT
Step 3: Successful pairingThe Connect LED on the audio device and headset will stop flashing and light up blue when paired.CONNECTCONNECT
Sound Blaster Recon3D Control PanelManaging your ProfilesClick the button to display the Profiles pane.Activate a profile by clicking and selecting it from the list.Click to save all settings to the current profile or create a new profile. Click to delete the active profile.Sharing ProfilesYou can export your custom settings and share them with others, or import other gamers’ custom settings.NOTE • Sound Blaster Recon3D profiles and Sound Blaster Tactic3D profiles are not compatible with each other.• Sound Blaster Recon3D profiles for Windows and Mac are not compatible with each other.
Adjusting your master volume settingsDrag the master volume slider to adjust the volume level.You can mute/unmute the volume by clicking the speaker icon.Configuring your software settingsClick each feature to access its settings page. More information on each feature can be found in their respective sections in this manual.Configuring your general settingsYou can change the language settings or restore settings to their default values. Click and select the option from the list.
THX TruStudio Pro Settings1 THX TruStudio Pro enhancementsSelect to enable or disable each enhancement.2 Enhancement Level slidersAdjust the amount of enhancement to apply.3Audio Test controlsPlay/Pause or Stop the demo video.Enhancing your listening experienceYou can adjust the amount to apply for each enhancement by dragging its slider left to decrease or right to increase. To test the effects of the audio enhancements, click and listen to the demo video.You can save your customized setting to your audio device, letting you recall it when you active the THX TruStudio Pro button. This lets you enjoy the same audio enhancements on your console. To learn how to save your settings, refer to Advanced Features Settings.
CrystalVoice Settings1 CrystalVoice enhancementsSelect to enable or disable each enhancement.Having fun with CrystalVoice FXSelect a voice preset to use, then click and speak into your microphone to hear how your voice sounds with the preset applied.
Speakers/Headphones Settings1 Device selectionSelect the number of speakers or headphones that you are using.Testing your audio playbackSelect the appropriate configuration based on your setup, then click to hear a sample audio clip being played back through your setup.
Cinematic Settings1 Decoder controlsSet the options for the Dolby Digital decoder.Configuring your digital audio connectionSet the Dolby Pro Logic option to Auto or On to enable decoding of Dolby Digital audio.Dynamic Range Control adjusts the volume level of the soundtrack automatically during soft or loud sections to enable you to hear all the sounds clearly.
Mixer Settings1 Volume slidersAdjust the playback and recording volume for your various inputs and outputs.Adjusting your Mixer settingsSlide the volume level sliders right to increase and left to decrease. Click the icon to mute/unmute the input/ouput. You can click the icon to adjust the settings for your input/output.
Equalizer Settings1 EQ presetsSelect an equalizer preset to apply to your audio.2 EQ slidersAdjust the equalizer settings.Customizing your EQ settingsSelect the EQ checkbox to enable this feature, then click the EQ drop-down arrow and select a preset from the list. Selecting a preset will move the EQ sliders to the appropriate values. You can adjust the equalizer setting by dragging the sliders up or down to the desired level.You can save your custom settings as new presets or delete existing ones.NOTE The list of default EQ presets cannot be deleted.
Advanced Features Settings1 Save/Load THX TruStudio Pro settingsSave your current settings to your audio device or load your audio device’s current settings.Saving/Loading THX TruStudio Pro settingsYou can get the same audio enhancements used with your PC/Mac on your console or vice versa. Select either Import from Device or Export to Device from the drop-down box, then click .NOTE Only one setting can be saved onto Sound Blaster Recon3D. If you save a new setting, the old one will be replaced automatically.
Using Your Audio DevicePlaying GamesYour audio device is equipped with cutting edge audio technologies and software to enhance the audio in your games. THX TruStudio Pro will elevate your gaming experience to the next level, allowing you to hear sound details in games you have never heard before!THX TruStudio Pro Surround provides immersion control of sounds not just around you, but also above and below for a full 3D audio experience. Hear the natural sense of audio depth, spaciousness and stunning 3D surround effects from your audio content. Enjoy an unbelievably true-to-life audio experience, whether it’s over stereo speakers or headphones.THX TruStudio Pro Crystalizer restores the dynamic range that is lost when iTunes and MP3 music gets compressed. This makes the music sound as good as the artist originally intended, and adds an enhanced level of realism for movies and games.THX TruStudio Pro Bass fills in the low frequency tones and gives the extra impact for a better entertainment experience. It dramatically improves the sound experience without a subwoofer.THX TruStudio Pro Smart Volume addresses the problem of abrupt volume level changes during playback and between songs by automatically and continuously measuring volume, and intelligently applying gain and attenuation to compensate for those changes.THX TruStudio Pro Dialog Plus enhances the voices in movies for clearer dialog, allowing the listener to hear the dialog over the rest of the soundtrack and over ambient noise in the listening environment.Scout Mode transforms your hearing and enables you to hear your opponents from further away, giving you a distinct tactical advantage in combat.Communicating with Voice over Internet Protocol (VoIP) Use a headset with your audio device to enjoy outstanding acoustic performance in popular VoIP applications like Ventrilo® and TeamSpeak®. Hear and be heard clearly by teammates during multiplayer games to get the tactical edge.
CrystalVoice FX enables the speaker’s voice to be altered with a variety of effects, which can be used to enhance the tone of the speaker’s voice, create interesting accents or to sound like a completely different person.CrystalVoice Smart Volume automatically adjusts the loudness of the speaker’s voice to maintain a consistent volume level. This makes it convenient for the speaker to converse normally, regardless of whether the speaker is close to or far away from the microphone.CrystalVoice Noise Reduction enables the speaker to be heard clearly over background noise by constantly monitoring the environment and eliminate the unwanted noise that interferes with the conversation.CrystalVoice Acoustic Echo Cancellation eliminates echoes and enables the speaker to listen to the other party clearly. Echoes are a common problem present in voice communication systems that disrupts conversations by making it difficult to hear the other party.
Configuring Creative ALchemyWhen playing DirectSound®3D games on Windows 7 and Windows Vista, the game loses its immersiveness and environmental effects due to changes in audio architecture. To restore these effects and experience the full audio immersion, follow the steps below:Enable Windows XP compatibility mode1Navigate to the folder where you have installed the game.2Right-click on the game’s launcher and select Properties.3Select the Compatibility tab and select the Compatibility Mode checkbox.4Click the Compatibility Mode drop-down arrow and Select Windows XP (Service Pack 2), then click OK.Enable the game in Creative ALchemy1Click Start Programs or All Programs Creative ALchemy Creative ALchemy.The game should be detected automatically and appear in the left column.2Select the game and click to move it to the right column.3Close the application.When you launch the game you should hear the original effects.NOTE If the game is not detected, do the following:• Navigate to the folder where you have installed the game.• Right-click on the game’s launcher and select Run as administrator.• Exit the application and launch Creative ALchemy again. The game should now appear in the left column.
Software SuiteVisit www.soundblaster.com to download the latest drivers and applications available for your audio device.The following applications are designed for you to access the basic as well as the advanced features of your audio device.Creative Software SuiteFor PC:• Sound Blaster Recon3D Control Panel• Creative ALchemy • Creative System InformationFor Mac:• Sound Blaster Recon3D Control PanelGeneral SpecificationsConnectivityOn the audio device• One 3.5 mm (1/8”) stereo jack for audio output• One 3.5 mm (1/8”) microphone jack for voice input• One 3.5 mm (1/8”) stereo/optical combo jack for audio input from game consoleOn the headset• One 3.5 mm (1/8”) stereo jack for connecting the detachable microphone• One 2.5 mm (1/10”) microphone jack for voice input through the Xbox 360 controllerInterfacesOn the audio device• Micro-USB port for connecting to game console or PC/Mac• Proprietary slot for wireless cardOn the headset• Micro-USB port for charging the batteryRadio Frequency• Operating RF range: 2405 - 2477 MHz• Operating RF distance: up to 30 ft (10 m)• Number of RF channels: 37• RF transmitter power output: 0 dBm (typical)NOTE • The applications available for your audio device may differ from those listed here.• Some applications are available for certain operating systems only. NOTE You cannot tune the RF channels.
THX TruStudio Pro Technology• THX TruStudio Pro Crystalizer• THX TruStudio Pro Surround• THX TruStudio Pro Bass• THX TruStudio Pro Dialog Plus• THX TruStudio Pro Smart VolumeSound Blaster CrystalVoice Technology• CrystalVoice Acoustic Echo Cancellation• CrystalVoice Noise Reduction• CrystalVoice Smart Volume• CrystalVoice FX
TroubleshootingProblems with Multiple Audio DevicesThe onboard audio chipset seems to be in conflict with Sound Blaster Recon3D.Disable your computer's onboard audio chipset. See your computer's motherboard documentation for details.Problems with SoundNo sound from the audio device.Check the following:• You have configured your console or PC/Mac to output audio through the audio device.• The volume settings in Sound Blaster Recon3D Control Panel and system audio are properly adjusted and not muted.• There is no hardware conflict between the audio device and a peripheral device.There is clipping/distortion during audio playback.Check the following:• Your computer system should be running in high performance mode. You may need to disable any power saving features.Problems with THX TruStudio ProSome features are disabled when playing certain games.When playing games that use DirectSound3D or OpenAL sound engines, certain audio features will be disabled automatically. This is to avoid distorting the environmental audio cues present in the game. These features will be re-enabled automatically when you exit the game.Problems with Wireless FeaturesElectronic interference is occurring with other wireless devices.Do the following:• Set your wireless LAN router's channel to Auto, 1 or 11. To do this, refer to your router's user documentation.• Place your audio device away from other devices (for example, wireless routers) that transmit wireless signals.• Place your audio device or receivers away from large metal surfaces.• Refrain from doing large file transfers via the wireless internet or Bluetooth connection while you are streaming music. Alternatively, stop streaming music during intensive file transfers.Sound is not being transmitted to my headset.Check the following:• The wireless card is inserted properly into the audio device.• The audio device and headset are turned on.• The headset has sufficient battery power.• The audio device and headset are paired with each other.
Safety InformationRefer to the following information to use your product safely, and to reduce the chance of electric shock, short-circuiting, damage, fire, hearing impairment or other hazards. Improper handling may void the warranty for your product. For more information, read the warranty available with your product. • Read these instructions.• Keep these instructions.• Heed all warnings.• Follow all instructions.• Do not use this apparatus near water.• Clean only with dry cloth.• Do not block any ventilation openings. Install the product in accordance with the instructions.• Do not install near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.• Do not expose your product to temperatures outside the range of 0°C to 40°C (32°F to 104°F).• Do not pierce, crush or set fire to your product.• Keep your product away from strong magnetic objects.• Do not subject your product to excessive force or impact.• Do not defeat the purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.• Only use attachments/accessories specified by the manufacturer.• Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.• Unplug this apparatus during lightning storms or when unused for long periods of time.• Do not dismantle or attempt to repair your product.Refer all servicing to authorized and qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.•WARNING: To reduce the risk of fire or electric shock, do not expose your product to water or moisture. If your product is moisture-resistant, take care not to immerse your product in water or expose it to rain.Earphones•When a conductive apparatus, such as earphones, is used in close proximity with a CRT television or CRT monitor, the latter may emit an electrostatic discharge. The electrostatic discharge can be felt as a static shock. While this static shock is usually harmless, it is good practice to avoid close contact with CRT devices when using earphones.• Do not listen to audio on your earbuds or headphones at high volume for prolonged periods of time as hearing loss may result. For users in the United States, go to www.hei.org for more information.• Do not listen to your audio device at high volume when driving, cycling or crossing the road, especially in heavy traffic, or in any other traffic condition where such use will hinder safe travel on the roads. We recommend that consumers be extremely cautious when using this device on the road.Embedded Battery• Do not attempt to remove the embedded battery.The product must be disposed of according to local environmental regulations. To replace the battery, return your product to your regional support office. For product service information, go to www.creative.com.Wireless Device• Switch off the device where it is prohibited, or when its use may cause danger or interference such as inside an aircraft, hospitals, or near refuelling points. WEEE DIRECTIVE 2002/96/EC The use of the WEEE Symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect the environment. For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider or the shop where you purchased the product.
IMPORTANT — A LIRE AVEC ATTENTIONEcouter de manière prolongée, à un très haut volume sonore de la musique (au dessus de 80 decibels), au moyen d'un casque ou d'écouteurs, peut entraîner une détérioration irreversible et définitive de vos facultés auditives. L’usage répété et habituel d’un casque ou d’écouteurs à un niveau de volume sonore trop élevé peut donner l'impression à l'utilisateur que le volume sonore émis par l’appareil n'est pas suffisant. L’utilisateur sera tenté d’augmenter, petit à petit, son réglage habituel, risquant ainsi d'atteindre un niveau dangereux pour ses oreilles. Afin de protéger votre santé, et vos oreilles, veillez à maintenir le volume de la sortie casque de votre appareil à un niveau adapté et à interrompre son utilisation régulièrement et particulièrement si des symptômes, comme des troubles de l'ouïe, se manifestent.N'utilisez pas le casque ou les écouteurs pendant la conduite d'une voiture, d'une bicyclette ou de tout autre véhicule motorisé, afin d'éviter tout accident de le circulation. En outre, il est interdit dans certains pays d'utiliser un casque ou des écouteurs en conduisant. Il peut être également dangereux d'écouter à volume élevé tout en marchant, spécialement aux passages piétons. Soyez toujours extrêment prudent et cessez d'utiliser cet appareil dans les situations présentant des risques d'accident.Evitez d'utiliser le casque ou les écouteurs à volume élevé. Les médecins spécialistes de l'audition déconseillent une écoute continue à volume trop élevé. Si vous percevez un sifflement dans les oreilles, réduisez le volume ou cessez l'écoute.Maintenez un volume d'écoute modéré. Vous pourrez ainsi entendre les sons extérieurs et être attentif aux gens qui vous entourent.Votre produit Creative accompagné des écouteurs fournis, est conforme à la règlementation française concernant les baladeurs musicaux (Arrêté du 24 Juillet 1998). Les caractéristiques techniques de ces écouteurs se trouvent dans le manuel en ligne et/ou sur le site internet de Creative. Si vous choisissez d'utiliser un autre casque ou d'autres écouteurs, veuillez vous assurer au préalable que leurs caractéristiques techniques soient les mêmes.срок эксплуатационнoй долговечностиВ соответствии с законодательством Российской Федерации компания Creative устанавливает для данного товара срок службы 2 года. Указанный срок – это период времени, в течение которого компания Creative гарантирует возможность использования продукции в соответствии с ее назначением. Кроме того, во время этого срока компания Creative гарантирует: (i) безопасность товара, (ii) возможность выполнения его ремонта и получения технической поддержки, (iii) поставку запасных частей. Однако установление срока службы не означает автоматического бесплатного предоставления технической поддержки и обслуживания. Эти виды услуг предоставляются бесплатно только в течение гарантийного периода в соответствии с гарантийными обязательствами.
Declaration of ConformityAccording to the FCC96 208 and ET95-19Manufacturer/Importer's Name: Creative Labs, Inc.Manufacturer/Importer's Address: 1901 McCarthy BoulevardMilpitas, CA. 95035United StatesTel: (408) 428-6600declares under its sole responsibility that the productTrade Name: Creative LabsModel Numbers: GH0200has been tested according to the FCC / CISPR22 requirement for Class B devices and found compliant with the following standards:EMI/EMC: ANSI C63.4, FCC Part 15 Subpart BComplies with Canadian ICES-003 Class BThis device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions: This device may not cause harmful interference, andThis device must accept any interference received, including interference that may cause undesirable operation.Ce matériel est conforme à la section 15 des régles FCC. Son Fonctionnement est soumis aux deux conditions suivantes: Le matériel ne peut étre source D'interférences etDoit accepter toutes les interférences reques, Y compris celles pouvant provoquer un fonctionnement indésirable.Compliance ManagerCreative Labs, Inc.September 21, 2011
Regulatory Information Notice for the USA FCC Part 15: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1This device may not cause harmful interference, and 2This device must accept any interference received, including interference that may cause undesired operation. CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be installed with computer equipment certified to comply with Class B limits. All cables used to connect to the computer and peripherals must be shielded and grounded. Operation with non-certified computers or non-shielded cables may results in interference to radio or television reception.MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device. California Proposition 65 Statement WARNING: Handling this product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.Wash hands after handling. Explanatory Note: California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65) requires special product labeling for products containing certain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Creative has chosen to provide a warning based on its knowledge about the presence of one or more listed chemicals without attempting to evaluate the level of exposure. With Creative's products, the exposure may be below the Proposition 65 level of concern, or could even be zero. However, out of an abundance of caution, Creative has elected to place the Proposition 65 warning on its products.Déclaration de la Proposition 65 de la Californie AVERTISSEMENT: La manipulation de ce produit peut vous exposer à des produits chimiques qui sont reconnus par l'État de la Californie comme pouvant provoquer le cancer, des anomalies congénitales ou d'autres effets nuisibles à la reproduction.Veuillez vous laver les mains après l'avoir manipuler. Note explicative: La Proposition 65 (California Safe Drinking Water and Toxic Enforcement Act of 1986) de la Californie sur les matières dangereuses et l'eau potable exige un étiquetage spécial pour les produits contenant certains produits chimiques qui sont reconnus par l'État de la Californie comme pouvant provoquer le cancer, des anomalies congénitales ou d'autres effets nuisibles à la reproduction. Creative a choisi d'inclure une mise en garde s'appuyant sur sa connaissance de la présence d'un ou de plusieurs de ces produits chimiques sans essayer d'en évaluer le niveau d'exposition. Pour les produits de Creative, le niveau d'exposition peut être inférieur au niveau critique établi par la Proposition 65 ou même être nul. Néanmoins, par souci extrême de prudence, Creative a choisi de placer l'avertissement de la Proposition 65 sur ses produits.
Notice for Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. CANADIAN CLASS B STATEMENT: This digital device does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus,” ICES-003 of the Department of Communications.Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareils numeriques de Class B prescrites dans la norme sur le materiel brouilleur. “Appareils Numeriques,” NMB-003 edictee par le ministre des Communications. MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device. Toute modification non approuvé explicitement par le fournisseur de licence de l’appareil peut entraîner l’annulation du droit de l’utilisateur à utiliser l’appareil. European Compliance This product conforms to the following: EMC Directive 2004/108/EC. Mains operated products for the European market comply with Low Voltage Directive 2006/95/EC and Commission Regulation(s) Implementing Directive (2005/32/EC)Communication / RF wireless products for the European market comply with R&TTE Directive 1999/5/EC. CAUTION: To comply with the Europe CE requirement, this device must be installed with CE certified computer equipment which meet with Class B limits.All cables used to connect this device must be shielded, grounded and no longer than 3m in length. Operation with non-certified computers or incorrect cables may result in interference to other devices or undesired effects to the product. MODIFICATION: Any changes or modifications not expressly approved by Creative Technology Limited or one of its affiliated companies could void the user’s warranty and guarantee rights. Notice for Australia / New ZealandTurkey RoHS StatementEEE Yönetmeligine UygundurInformation in this document is subject to change without notice and does not represent a commitment on the part of Creative Technology Ltd. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose without the written permission of Creative Technology Ltd.Copyright © 2011 Creative Technology Ltd. All rights reserved. Creative, the Creative logo, Sound Blaster, the Sound Blaster logo, Recon3D, Tactic3D, CrystalVoice and Creative ALchemy are trademarks or registered trademarks of Creative Technology Ltd. in the United States and/or other countries. THX and the THX TruStudio Pro logo are trademarks of THX Ltd. which may be registered in some jurisdictions. Windows, Windows Vista, Xbox and Xbox 360 are registered trademarks of Microsoft Corporation. PlayStation is a registered trademark and PS3 is a trademark of Sony Computer Entertainment Inc. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Mac and Mac OS are registered trademarks of Apple Inc. All other trademarks are properties of their respective owners. All specifications are subject to change without prior notice. Use of this product is subject to a limited hardware warranty. Actual contents may differ slightly from those pictured. The software included in this packaging may not be used separately from the hardware. Before using the software, you must agree to be bound by the terms and conditions of the end user license agreement.Version 1.0September 2011Complies with the requirements of the ACMA Radiocommunications (Electromagnetic Compatibility) Standard 2008

Navigation menu