Creative Labs AVPSB1630 Creative iRoar User Manual Creative iRoar

Creative Labs Inc Creative iRoar Creative iRoar

User Manual

IntroductionThank you for choosing Creative iRoar, the next generation Sound Blaster®that is equipped withspeaker and microphone functions for both audio playback and voice recording capabilities. The iRoar(SB1630) model design provides portability and low power consumption without compromising youraudio pleasure.Package ChecklistYour Creative iRoar package comes with the following:lThe Creative iRoar speakerl1.5m Micro-USB cablel15V 1.6A 24W AC-DC Adapter with interchangeable plugsSystem RequirementsFor Windows®OSlIntel® Core™2 Duo or AMD equivalent processor, 2.8 GHz or faster recommendedlMicrosoft®Windows 8.1 64-bit or 32-bit, Windows 8 64-bit or 32-bit, Windows 7 64-bit or 32-bit,Windows Vista®64-bit or 32-bitl1 GBRAMl600 MB of free hard disk spacelPowered USB 2.0 / USB 3.0 portFor Mac®OSlIntel® Core™2 Duo, 2.8 GHz or faster recommendedlMac OS X® 10.6.8 or higherl1 GB RAMl600 MB of free hard disk spacelPowered USB 2.0 / USB 3.0 portFor iOS deviceliPhone® / iPad® running iOS 5.0 or higher for BluetoothFor Android devicelPhone / tablet running Android 2.3 or higher for BluetoothRegistering Your ProductRegistering your product ensures you receive the most appropriate service and product supportavailable. You can register your product during installation or at register.creative.com. Please note thatyour warranty rights are not dependent on registration.Introduction 1
More HelpFor the latest news and products for the Sound Blaster, please visit www.soundblaster.com. The sitealso includes information on making purchases, technical help and the latest software updates.Using Creative Software AutoUpdateLocating, downloading and installing updates for your Creative products is now simpler and faster withthe web-based Creative Software AutoUpdate system.When you connect to Creative Software AutoUpdate via the Internet, the website will analyze yourcomputer system to determine your operating system, language and which Creative products areconnected to your system.When this analysis is completed, you will then be given a list of only the most relevant software updatesfor your connected products. The files can then be retrieved and installed.To learn more about the Creative Software AutoUpdate, please visit support.soundblaster.com.Note:First-time users of Creative Software AutoUpdate may be prompted to authorize the download of abrowser component required for system analysis. Check to ensure that this content is signed byCreative Labs, Inc., then click the Yes button.Please ensure that all your Creative products are connected and installed on the same computerrunning Creative Software AutoUpdate.Introduction 2
Product OverviewThe Creative iRoar has input and output jacks to enable connection to various devices while the adaptivetouch controls on the top give you basic control over your audio device.TopControl /Jack /IndicatorDescription1 Power / Blue-toothToggles device's power ON or OFF.ON: Press onceOFF:Press againBluetooth:Press and hold 3 secondsRecovery mode:Press 2 secondsReset speaker:Press 10 seconds2 Mode Press to toggle speaker mode:-Bluetooth- SDCard- Recording- Megaphone- Voice CallProduct Overview 3
Control /Jack /IndicatorDescription3 Rewind / Pre-vious TrackRewind TrackPress and hold to rewind.Previous TrackPress once to go to the previous track.4 Play / Pause Press to play or pause a track.5 Forward / NextTrackForward TrackPress and hold to forward.Next TrackPress once to go to the previous track.6 Record Press to start or stop voice recording.7 ROAR Boosts the loudness of your music.8 Voice Focus Activates CrystalVoice Focus.9 Mic Mute Indicates whether the internal microphone array ismuted.A red LED indicates mute while a white LED indicatesotherwise.10 Conference /TalkPress to answer or end calls on device.Answer call: Press onceEnd call:Press again11 Volume - Press to decrease volume.12 Volume + Press to increase volume.13 Dot Matrix LED Displays speaker status.14 NFCreceptor Tap NFC device to connect.xx Touch Lock Press to lock the touchscreen controls.xx Booster Up to 8- Megaphone (when Tiger is connected)- Personal (When Boosters are added fromBlasterXDashboard)Product Overview 4
RearControl /Jack /IndicatorDescription14 DC-In port Connects to a supplied 15V 1.6A 24W AC-DC poweradapter.15 micro-USB port Connects to the USB port of a PC/laptop for audio stream-ing via a Micro-USB cable.16 MicroSD slot The iRoar supports microSD or microSDHC cards up to32GB. You are able to save recorded voice files and play-back audio files from the microSD card.17 Shuffle /Repeat AllswitchSlide to select random play mode or repeat all tracks.18 Aux-In jack Connects to line-level sources (such as MP3 players) ormicrophones with a 3.50mm (1/8-inch) plug.19 Optical-In jack Connects to playback devices with optical connectors (forexample, Digital Audio Tape players, MiniDisc players, DVDplayers or televisions with optical output).20 USBport For charging mobile devices.xx Docking Con-nector8 POGOpins (for future accessory suport)Product Overview 5
Setting Up Your Audio DeviceStep 1:Charge Your iRoariRoar comes with a built-in rechargeable battery that provides up to 16 hours of playtime when fullycharged. Charge the speaker with the supplied power adapter for at least 3 hours before use. Eachsubsequent charge cycle takes around 2.5 hours.Assembling the Power AdapterlUS, Japan & TaiwanlEuropeRemoving Adapter Plug HeadNote:Supplied interchangeable plugs mayvary according to region and country.To check battery status, press and hold the MODE button for 2 seconds.The battery level will then be displayed on the Dot Matrix LED.Battery Level 100% - 70% 70% - 40% 40% - 10% 10% - 0%DotMatrix LEDSetting Up Your Audio Device 6
Note:Lithium-ion battery life may suffer when it is constantly fully depleted or overexerted at low voltage.It is a good practice to keep the battery well charged.Power saving mode: The speaker automatically powers down when there isno Bluetooth connection, recording using microSD card, microSD card playbackor audio input for more than 15 minutes.For optimized charging: Creative recommends using the bundled USB cablefor optimized charging. Ensure your speaker is powered off for optimizedcharging.Setting Up Your Audio Device 7
Step 2: Turn On iRoarlTurn ON:Press the Power button.lTurn OFF:Press the Power button again.Setting Up Your Audio Device 8
Step 3: Connecting PeripheralsOne-touch NFC pairingYou may pair your NFC-enabled devices with iRoar using NFC technology. The large surface area forNFC sensing on iRoar allows you to aim freely with your NFC device.Action LEDStatus StatusTurn ON the NFC feature on yourdevice. Touch your device on thefront panel of iRoar.If prompted "Are you sure you wantto pair the Bluetooth device?", tap"Yes".Bluetooth mode Device paired automatically.Ready to stream music.Note:Be sure that your phone is NFC-enabled and find out where the NFC sensor is located on your phone.For more information, refer to the User Guide of your phone.To disconnect, tap your device with the iRoar again.Setting Up Your Audio Device 9
Manual Bluetooth pairingTo enjoy your favorite music from your Bluetooth devices, simply follow these steps to connect them.Action LEDStatus Status1 Press and hold the Power /Bluetooth button for 2seconds.Bluetooth mode(blinking)Pairing mode.Ready to be paired withnew device.2 Turn ON the Bluetooth fea-ture on your device.Search and select "CreativeiRoar".Bluetooth mode Ready to stream music.Note:Bluetooth pairing between these devices may vary depending upon the model type. Consult yourdevice’s manual on how to pair.The iRoar supports dual connections, which means you can connect it to two Bluetoothdevices at thesame time. If you wish to connect it with a third device, you should disconnect the existing twodevices first before connecting it to the other device.Setting Up Your Audio Device 10
USB ConnectionConnect your iRoar to a computer using the Micro-USB cable provided.Analog ConnectionThe iRoar also lets you connect devices using the 4-pole analog cable (not included).Setting Up Your Audio Device 11
Using Your Audio DeviceYour iRoar works seamlessly with many external devices to perform different tasks:lPlaying musiclRecording audiolAnswering and ending callslCharging mobile deviceslAmplifying voices*lBuilding home stereo systems**Note:Once connected, the microphone functions of your device are transferred to the iRoar.*Connect Tiger (available separately)to iRoar via Bluetooth.**Link two iRoars together using the MegaStereo cable (available separately).Playing MusicPlaying music from a Bluetooth deviceTo stream audio from your mobile device wirelessly,1. Connect your smart device via one-touch NFC pairing or manual Bluetooth pairing.2. The speaker enters Bluetooth Playback mode.3. Play your music from your smart device!To adjust speaker volume,lIncrease volume:Press Volume + buttonlDecrease volume:Press Volume -buttonTo mute/unmute speaker,lMute speaker:Press and hold Volume - buttonlUnmute speaker:Press Volume - or Volume + buttonUsing Your Audio Device 12
Playing music from a computer (USB audio)You can choose to hear audio from your computer through the speaker when it is connected via a USBcable. iRoar uses asynchronous USB which provides jitter management for ultra precise audio.1. Connect the speaker to your computer via the USB cable.2. The speaker enters Playback mode.3. Play your music on your computer!lIf no audio is heard:For WindowsClick volume control and select Creative iRoar as your output device.For Mac1. Go to System Preferences and click Sound.2. Click the Output tab and select Creative iRoar.lUSB audio will disconnect if Play / Pause button is pressed during USB audiomode.Using Your Audio Device 13
Playing music from a microSD card*You can play MP3, M4A and WAV format audio from a microSD card.1. While the speaker is powered ON, insert a microSD card into the speaker.2. The speaker enters SDCard Playback mode.3. Play your music via controls on the speaker.Action StepPlay / Pause MP3 Audio Press Play / Pause button.Previous / Next Track Press Previous / Next button once while music is playing.Previous / Next Folder Press and hold or double tap Previous / Next button whilemusic is playing.ORPress Previous / Next when playback is stopped.Shuffle / Repeat All Tracks Slide the switch to Shuffle to play tracks in random order.Slide the switch to Repeat All to repeat all tracks incontinuous order.Note:* Feature only works when a microSD card with MP3, M4A or WAV audio files is inserted into thespeaker. Supports up to 32GB microSD card. All microSD and microSDHC cards are supported foraudio playback. For recording, we recommend that you use Class 4 or higher.Using Your Audio Device 14
Recording AudioYou can record audio from the speaker or using the built-in microphones. When the speaker is poweredon, insert a microSD card into the microSD slot.Recording audio from the microphone1. Ensurethe Mic Mute button is turned OFF and press the Record button to record.2. Press Record button to stop anytime.The Tiger (available separately) is a Bluetooth microphone designed to workseamlessly with your iRoar to provide you with enhanced megaphone featureswhen connected. You can use it to record your voice, amplify your voice or evento sing along to your favorite songs.Recording audio from Aux-in and Bluetooth source1. Ensurethe Mic Mute button is turned ONand press the Record button to record.2. Press Record button to stop anytime.Playback recorded tracksSimply press the Play/Pause button and use the Next or Previous button to navigate betweenrecorded tracks.To record audio,lStart/stop recording:Press REC buttonlPause/resume recording:Press PlaybuttonlToggle between Voice FX options:Press Next or Previous buttonUsing Your Audio Device 15
To playback recording,lPlay/pause recording:Press Play/Pause buttonlSkip recording:Press Next or Previous button*Start recording after you hear a “beep”. The pulsing Recording dot matrix LEDindicates that recording is ongoing.Note:Recording from microphone also records the audio coming out from Bluetooth and Aux-in audiosources.Audio recording is saved in WAV format in the VOICE folder.For recording, a Class 4 microSD/SDHC card is recommended.It is a good practice to use a new microSD card for recording.Simultaneous MP3 audio playback using microSD card and audio recording is not supported.Using Your Audio Device 16
Answering and Ending CallsWhen there's an incoming call, the call takes precedence over audio playback – playback stops and thecaller's phone number will be heard.Press the Call button once to answer the call. Press again to end a call. The music will resume after thecall has ended.When there's an incoming voice call,lAccept call:Press CALL buttonlReject call:Press PowerbuttonlMute/unmute ringer:Press Volume + or Volume - buttonIn an active voice call,lEnd call:Press CALL or Power buttonlTurn off/on internal mic:Press Mic Mute buttonlToggle between Voice FX options:Press Previous or Next buttonUsing Your Audio Device 17
Charging Mobile DevicesThe dual-purpose battery powers your iRoar and also charges your mobile device. Its HyperChargingfeature charges your device two times faster than a standard USBport on a computer.Simply connect a USB cable to the iRoar’s USB DC Out and the other end to your mobile device.Optimize your charginglThe speaker will charge your mobile devices even when the speaker is off.lWhen turned on, some mobile devices require a higher charging rate thanbattery banks can typically provide. For the quickest charging time, turn offyour mobile device before charging it.Using Your Audio Device 18
Building Home Stereo SystemsThe MegaStereo cable* allows you to link two Creative iRoars together, to create individual left andright channels to achieve a wider sound stage. In this setup, one speaker acts as a left (Master) channeland the other Roar speaker acts as a right (Slave) channel.1 - Master (Left)2 - Slave (Right)3 - MegaStereo cable(available separately)1. Ensure that both speakers are powered off.2. Connect the MegaStereo cable accordingly to the diagram above.3. Turn on the speaker labelled Master (Left) first, then turn on the speaker labelled Slave (Right).4. Adjust the volume on the Slave (Right) speaker to maximum.You will hear a beeping sound which indicates that you have reached the maximum volume.5. Play music from your Bluetooth, MicroSD card or USB audio only from the Master (Left) speaker.6. Adjust the volume only from your Bluetooth device or on the Master (Left) speaker.For optimum sound performance,lConnect both speakers to their power adapters.lEnable the TeraBass of the master speaker only.Power Off Sequence:With both units powered ON, power OFF the Slave (Right) speaker then the Master (Left) speaker.Using Your Audio Device 19
Note:*The MegaStereo cable is available separately at Creative Stores.The MegaStereo feature is only available for audio playback from Bluetooth devices, MicroSD card,and USB audio via PC/Mac. Aux-in for both speakers are disabled when the MegaStereo cable isconnected.The instructions above are safety measures for protecting the speaker systems from suddenelectrical surges and diminishing battery life.Using Your Audio Device 20
Installing and Uninstalling SoftwareTo take full advantage of your Creative iRoar, you need to install the application. At times, you may alsoneed to uninstall some or all of the applications to correct problems, change configurations, or upgradeoutdated application. To learn how to do so in all supported Windows and Mac operating systems,consult the following sections:lInstalling ApplicationlUninstalling ApplicationInstalling ApplicationEnsure that your audio device is connected before proceeding. For instructions onconnecting your audio device, consult your Quick Start leaflet.After you have connected your audio device, turn on your computer. Windows automatically detectsyour audio device.For Windows OS1. Using a standard web browser, visit support.creative.com.2. Locate Creative iRoar and the software package for your Windows operating system.3. Download this package into your local hard disk.4. Locate and launch the software package.5. Follow the on-screen instructions to complete the installation.6. When prompted, restart your computer.7. Launch the application by locating and clicking BlasterX Dashboard.For Mac OS1. Using a standard web browser, visit support.creative.com.2. Locate Creative iRoar and the software package for your Mac OS.3. Download this package into your local hard disk.4. Double-click the downloaded file to uncompress it.5. Double-click the uncompressed DMG file.6. Double-click the Install icon and follow the subsequent on-screen instructions to complete theinstallation.7. Launch the BlasterX Dashboard from the Applications >Creative folder.Note:Depending on your operating system, model and software version, the user interface or color thememay differ.Installing and Uninstalling Software 21
Uninstalling ApplicationIn the event that an uninstallation is required (such as for upgrades), please follow the followingprocedure.Before you begin, close all running audio applications. Applications that are still runningduring uninstallation will not be removed.For Windows OS1. From the Control Panel, click Uninstall a program.2. Select your audio device's entry.3. Click the Uninstall button or option.If the User Account Control dialog box appears, click the Continue button.4. Click the Yes button.5. When prompted, restart your computer.For Mac OS1. Click Applications >Creative >Creative Uninstaller.2. Select the Creative product to be uninstalled.3. Click the Uninstall button.4. Follow the on-screen instructions.Installing and Uninstalling Software 22
Installing the Mobile AppBlasterX Control (for iOS and Android) - TBCCreative iRoar comes with an amazing app, BlasterX Control, that supports both iOS and Android OS, soyou can customize your audio – you now have total control right from the palm of your hand. DownloadBlasterX Control from the Apple App Store or Google Play Store.Installing and Uninstalling Software 23
Using the Creative Software SuiteA specialized software for the BlasterXDashboard is developed to provide additional enhancements tothe audio and voice inputs and outputs of the product. The software bundle supports a range ofoperating systems including:lWindows 8, Windows 7, Windows Vista, Windows XPlMacTo take full advantage of your iRoar, we recommend downloading and installing this software into yourcomputer. The following applications are included in the software bundle:For Windows OS,lBlasterXDashboardlCreative SoftwareAutoUpdatelCreative System InformationlProduct RegistrationlCreative ALchemylHost OpenALlCreative DriverYou can also download the following bonus applications from www.creative.com/support:lCreative WaveStudiolCreative Media ToolboxFor Mac OS,lBlasterXDashboardlProduct RegistrationlCreative UninstallerNote:Some applications are available only for certain operating systems. To learn more about eachapplication, please consult its respective Online Help.Using the Creative Software Suite 24
BlasterXDashboardThe rest of this chapter explains how to use the BlasterXDashboard to view and adjust the variousfeatures of your iRoar. The examples and screenshots below uses Windows as an example. The UI forother operating systems may differ slightly.Managing Your ProfilesThe BlasterXDashboard comes equipped with a set of pre-configured profiles to suit your differentneeds including:lMusiclMovieslGamingTo activate a profile,Using the Creative Software Suite 25
1. Click the SBX Profile menu on the left to view the SBX Profile screen.2. Select your desired profile from the screen.To modify and save changes to the active profile,1. Click the Edit button to modify the profile you have selected.2. Navigate through the various other menu options of the BlasterXDashboard and modify theconfigurations as desired.Adjusting Speaker Volume Via SoftwareA master volume slider is available at the bottom left corner ofthe interface. Drag the slider to adjust the master volume. Youcan also mute / unmute the speaker by clicking the speaker icon to the left of the slider.Configuring Your General SettingsYou can change the language settings or restore settings to their default values. Click from the topright corner of the interface and select the option from the list.The battery icon indicates the battery status of the iRoar.Using the Creative Software Suite 26
SBX Pro Studio SettingsTo configure SBX Pro Studio, go to the SBX Profile screen, select a profile and click Edit to enter theSBX Pro Studio screen. By default, the SBX effect is turned on. You may adjust the effects on thisscreen.1. Click the power button to toggle ON SBX Pro Studio.2. Select the type(s) of enhancements to apply and drag the sliders to adjust the level for eachenhancement.3. Click to test the audio output, if necessary.4. Click Save to save the adjusted settings or Reset to restore default settings.Note:You can also toggle SBX Pro Studio ON via the physical touchscreen of the iRoar. Enhancementadjustments can only be made via the software.SBX Pro Studio includes a number of enhancements for movies and gaming, elevating your movie andgaming experience to the next level. These include:lSBX Surround - designed to work best when you connect a pair of headphones to the iRoar, thistechnology provides immersion control to enhance the natural sense of audio depth andspaciousness by creating virtual surround sound channels. Stereo content or multichannel contentwill sound as if its coming from all sides while voices remain centered in front and original balanceand timbre is preserved.lSBX Crystalizer - restores the natural dynamic range that is lost when music files (iTunes andMP3) gets compressed. This makes the music sound as good as the artist originally intended, andadds an enhanced level of realism for movies and games.lSBX Bass - fills in the missing low frequency tones and gives the extra impact for a betterentertainment experience. Consumers no longer have to tolerate a lack of bass in speakers as theSBX Pro Studio Bass technology dramatically improves the sound experience even in the absence ofa subwoofer.Using the Creative Software Suite 27
lSBX Smart Volume - addresses the problem of abrupt volume level changes during playback andbetween songs by continously measuring volume automatically, applying gain and attenuationintelligently to compensate for any changes.lSBX Dialog Plus - enhances the voices in movies for clearer dialog, allowing the listener to hearthe dialog over the rest of the soundtrack and over ambient noise in the listening environment.Equalizer SettingsTo configure Equalizer settings, select a profile from the SBX Profile screen. Click Edit and then clickEqualizer.To adjust and apply an equalizer preset,1. Check the EQ checkbox to enable the use of the equalizer.2. From the drop down menu, select the preset to use.3. Adjust the vertical slider bars to achieve your desired level.4. Click Save to save the changes to the active preset or to a new preset.You can also delete any user created equalizer presets by selecting the preset from the drop down menuand clicking Delete.Note:All default equalizer presets cannot be deleted.Using the Creative Software Suite 28
CrystalVoice SettingsThe iRoar is equipped with high-quality microphones, allowing you to easily carry out video/audioconferencing using popular VoIP applications such as Ventrilo®etc. CrystalVoice enhancements help tofurther this experience by enhancing the clarity of such communications.To configure CrystalVoice settings, click the CrystalVoice menu option on the left. Select aCrystalVoice profile and click Edit.1. Select the iRoar as your recording device, adjusting the microphone volume using the slider.2. Select the desired enhancements to turn on and adjust the settings according to your needs.3. Click Test and speak into your iRoar to hear your voice recorded based on the configured settings.Readjust if necessary.Using the Creative Software Suite 29
CrystalVoice enhancements helps you hear and be heard clearly by all participants of the conference,doing away with noisy background distortions and unclear communication that disrupts your onlinegaming and chatting experience. The various enhancements available include:CrystalVoice Acoustic Echo Cancellation - eliminates echoes and enables the speaker to listen tothe other parties clearly. Echoes are a common problem present in voice communication systems thatdisrupts conversations by making it difficult to hear the other party.CrystalVoice Noise Reduction - enables the speaker to be heard clearly over background noise byconstantly monitoring the environment and reducing unwanted noise that interferes with theconversation.CrystalVoice Smart Volume - automatically adjusts the loudness of a voice to maintain a consistentvolume level. This makes it convenient for the speaker to converse normally, regardless of his distancefrom the microphone.CrystalVoice FX - enables the alteration of voice with a variety of effects which can be used toenhance the tone of a voice, create interesting accents or even allow someone to sound like acompletely different person. There are 17 different characters available in the BlasterXDashboard!CrystalVoice Focus - creates a zone and suppresses noise outside it to enable the speaker within tobe heard with amazing clarity. Multiple microphones are used to focus, enhance the speaker’s voice,and reduce sounds outside the zone.Using the Creative Software Suite 30
Speakers / Headphones SettingsEach iRoar is equipped with a headphone jack, allowing you to connect your favorite headphones to theiRoar for audio output. Connecting headphones to the iRoar automatically mutes the speaker. From thesoftware, you can check whether audio is played via speakers or headphones.1. View the current settings for the speakers / headphones.2. Click Test to hear a sample audio clip played back based on the settings.Using the Creative Software Suite 31
Mixer SettingsA mixer is also available via the software, allowing you to adjust the volume levels of individual outputsand channels including the microphone, speakers, etc. Simply click the Mixer option on the menu andadjust the volumes using the sliders.Using the Creative Software Suite 32
Advanced FeaturesThe software also provides other advanced features including:lBluetooth Auto ConnectionlSetting the Siren to Default On / OffBluetooth Auto ConnectionThe "Bluetooth Auto Connection" feature allows a paired Bluetooth device to be connected to the iRoarautomatically. When the feature is enabled, the iRoar detects and reconnects to the previously pairedBluetooth device when it is turned on.Setting the Siren to Default On / OffThe "Siren in Super Megaphone mode" allows you to enable or disable the siren on your iRoar. When thefeature is enabled, turn on Super Megaphone, and you can easily activate the Siren simply by tapping onthe Siren ON/OFF button (i.e. Noise Reduction button) twice.Follow the steps below to enable or disable these advanced features.i. Connect your iRoar to your computer installed with the BlasterXDashboard.ii. Select your desired feature by checking or unchecking the checkbox.iii. Disconnect your iRoar from the computer.Using the Creative Software Suite 33
Voice Recording SettingsThe Creative iRoar Voice Recording Settings is an application that provides you the option to setthe sampling rate of your iRoar to enhance your music and voice recordings.The default sampling rate at 16kHz is designed to record longer voice recording sessions (e.g.meetings, conference calls, etc.) and to avoid large file sizes. You can switch it to 48kHz, which is idealfor shorter, higher quality Karaoke music recording.This utility is available for download on the www.creative.com/support site. Install and launch theCreative iRoar Voice Recording Settings.Note:Ensure that the iRoar is connected to the computer with a microSD card inserted into it.1. Select your desired music / voice recording sampling rate.l48kHz - recommended for music recordings for better quality audiol16kHz - recommended for voice recordings (e.g. meetings, conference calls, etc.)2. Click OK to save the new sampling rate.Using the Creative Software Suite 34
General SpecificationsControls and IndicatorslMode buttonlBooster buttonlRewind / Previous Track buttonlPlay / Pause buttonlForward / Next Track buttonlVoice Recording buttonlROARbuttonlVoice Focus buttonlConference / Talk buttonlMic Mute buttonlVolume + buttonlVolume - buttonlDot Matrix LEDlTouch Lock buttonlPower / Bluetooth buttonlShuffle / Repeat All switchInputslDC-In portlmicro-USBportlMicroSDslotlAux-in jacklOptical-In jacklUSBportlDocking ConnectorlBuilt-in MicrophonesPhysical SpecificationslDimensions (L x W x H) : 225 x 120 x 57 mmlWeight: 1.1 kgTechnical SpecificationsBluetooth Version: Bluetooth 2.1 + EDR (Enhanced Data Rate)Bluetooth Profiles:lA2DP (Wireless Stereo Bluetooth)lAVRCP (Bluetooth Remote Control)lHFP (Hands-Free Profile)Bluetooth Operating Frequency: 2402 - 2480 MHzBluetooth Operating Range: Up to 10 meters / 33 feet(Measured in open space. Walls and structures may affect range of device.)Audio Codec: AAC, SBC, aptX®General Specifications 35
Operating Temperature range: 0°C to 45°C(0°C to 40°C when powered by external power adapter)Lithium Ion Battery: 9000 mAhUSBPower Adapter: 15V 1.6A 24W AC-DCAdapterlInput:AC 100-240 V 50/60 Hz, 0.3 AlOutput: DC 5 V, 2.1 AlConnector:USBstandard Type Afemale connectorNote:Compliance markings are located on the bottom of this product. Remove rubber cover to see thecompliance markings.The serial number for your Creative iRoar is located on the bottom of this product. Please write theserial number down and keep it in a secure place.General Specifications 36
Troubleshooting and SupportPerform the following troubleshooting steps before sending it for servicing.For more information, refer to www.creative.com/support.1. The Creative iRoar cannot be powered on. What should I do?lEnsure that there is enough battery power on the speaker and there should be at least one lit LED onthe battery indication LED.lConnect to a power source using the supplied power adapter or the supplied USB cable (from a com-puter or laptop USB port) and try to power it on again.lThe internal battery may be empty. Connect to the supplied power adapter or the supplied USBcable and charge it for about 1 hour before attempting to power it ON again.2. There’s no Bluetooth link between my device and the iRoar. What should I do?lEnsure that your Bluetooth enabled device supports A2DP profile. Refer to its user’s manual on howto enable (turn on) the Bluetooth functions and its capabilities.You may also try the following:lDelete the iRoar name entry from your Bluetooth device paired memory list and perform the stepsin Connect it (One-touch NFC pairing or Manual Bluetooth pairing) to re-pair your device with iRoar .lEnsure that both your Bluetooth device and iRoar are not connected to any other devices.lOn some Bluetooth device, you may need to select iRoar as your default output device after pairingis complete**.3. I am unable to pair to my Bluetooth NFC-enabled devicelEnsure that NFC is turned on for your device. For information on how to turn on NFC, please consultthe documentation found on your NFC-enabled device.lEnsure that both your NFC-enabled device is not connected to any other Bluetooth devices and thatthe iRoar is not connected to two Bluetooth devices and try again.Note:The Creative iRoar can connect to a maximum of 2 stereo Bluetooth devices at any given time andwill reject the 3rd device connecting via NFC or Bluetooth until one Bluetooth device is disconnected.lIf you are encountering NFC pairing issues with only one Bluetooth device connected, please pausethe music before attempting to tap another NFC device to connect.lUpdate your NFC-enabled Bluetooth device firmware and try the above 2 steps again.4. Bluetooth link is established either by NFC or Manual pairing between the devices butthere’s no music. What should I do?If the device you have paired is the 2nd device connected to the speaker, with the 1st device currentlystreaming music, you would need to stop playing music on the 1st device to allow music streaming onthe 2nd device.** With some built-in Bluetooth enabled computers, 3rd party USB Bluetooth dongles or other devices,you may be required to manually specify/set-up the audio output as iRoar . (For example, under soundand audio devices section on your computer’s settings) Please consult your manufacturer’sdocumentation for further information.5. How do I disable Voice Prompt? (TBC)Launch the BlasterXControl mobile app. Under "Voice and Tone",tap "Off" to disable all audio prompt or"Tone"to disable voice prompt. A prompt is heard indicating voice prompt is disabled.Troubleshooting and Support 37
6. How do I enable Voice Prompt?On a speaker with disabled voice prompt, ensure that it is powered ON. Press both Volume “+“ andMultifunction Button at the same time. A prompt is heard indicating voice prompt is enabled.7. Why is my speaker unable to power off automatically after 15 mins of inactivity?Ensure that there are no Bluetooth devices connected to the speaker and that the Aux-in does not have amusic / noise signal on it. Please also ensure that that the speaker is also not in the following modes:- Audio playback from microSD card- Recording onto microSD cardPlease note that power is supplied through the connected USB cable via DC out (USB output) whenever adevice is attached to the speaker even when the speaker is OFF.8. Why do I hear beep tones when I disable voice prompts?The beep tones are meant to be indicators for the following items:1 beep tone Feature activated indicator2 beep tone Feature confirmation indicator3 beep tone Error indicatorAdditional SupportIf you encounter any other issues or have any other enquiries about your iRoar or any other Creativeproducts, please visit our comprehensive knowledge base at support.creative.com orwww.soundblaster.com for additional information.Troubleshooting and Support 38
Safety InformationRefer to the following information to use your product safely, and to reduce the chance of electric shock,short-circuiting, damage, fire, hearing impairment or other hazards. Improper handling may void thewarranty for your product. For more information, read the warranty available with your product.lDo not dismantle or attempt to repair your product.Refer all servicing to authorized repair agents.lDo not expose your product to temperatures outside the range of 0°C to 45°C (32°F to 113°F).lDo not pierce, crush or set fire to your product.lKeep your product away from strong magnetic objects.lDo not subject your product to excessive force or impact.lDo not expose your product to water or moisture.If your product is moisture-resistant, take care not to immerse your product in water or expose it torain.lUse a mains plug that is appropriate for your country or region.lTo be completely disconnected from the power input, the mains plug has to be disconnected /detached from the mains.lDisconnect the mains plug when the device is expected to be unused for several days.lPlace the product near a socket outlet, which is easily accessible.Bluetooth ProductlThe short wave radio frequency signals of a Bluetooth device may impair the operation of otherelectronic and medical devices.lSwitch off the device where it is prohibited. Do not use the device in medical facilities, aircraft,refueling points, close to automatic doors, automatic fire alarms or other automatically controlleddevices.lKeep this device at least 20 cm from pacemakers and other medical devices. Radio waves mayimpair the operation of pacemakers and other medical devices.Embedded BatterylDo not attempt to remove the embedded battery.The product must be disposed of according to local environmental regulations. To replace thebattery, return your product to your regional support office. For product service information, go towww.creative.com.lDo not expose to excessive heat such as sunlight, fire or the like.CAUTION: Risk of explosion if battery is replaced by incorrect types.Safety Information 39
Regulatory InformationThe following sections contains notices for various countries.Caution:This product is intended for use with FCC/CE certified computer equipment. Please check theequipment operating/installation manual and/or the equipment manufacturer to verify/confirm ifyour equipment is suitable prior to the installation or use of the product.Notice for the USAFederal Communication Commission (FCC) Interference StatementFCC PART 15: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures:lReorient or relocate the receiving antenna.lIncrease the separation between the equipment and receiver.lConnect the equipment into an outlet on a circuit different from that to which the receiver isconnected.lConsult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that may cause undesiredoperation.Caution:To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, thisdevice must be installed with computer equipment certified to comply with Class B limits.All cables used to connect to the computer and peripherals must be shielded and grounded. Operationwith non-certified computers or non-shielded cables may result in interference to radio or televisionreception.MODIFICATION: Any changes or modifications not expressly approved by the grantee of this devicecould void the user’s authority to operate the device.Federal Communication Commission (FCC) Radiation Exposure StatementPower is so low that no exposure calculation is needed.Regulatory Information 40
Notice for CanadaThis Class B digital apparatus complies with Canadian ICES-003 and RSS-210.Cet appareil numérique de classe B est conforme aux normes canadiennes NMB-003 et CNR-210.This device complies with Industry Canada licence-exempt RSS standard.Operation is subject to the following two conditions:1. This device may not cause harmful interference, and2. this device must accept any interference received, including interference that may causeundesirable operation.Cet appareil est conforme avec Industrie Canada RSS standard exempts de licence.Son fonctionnement est soumis aux deux conditions suivantes :1. Le matériel ne peut étre source D’interférences et2. Doit accepter toutes les interférences reques, Y compris celles pouvant provoquer unfonctionnement indésirable.CANADIAN CLASS B STATEMENT: This digital device does not exceed the Class B limits for radionoise emissions from digital apparatus as set out in the interference-causing equipment standardentitled "Digital Apparatus," ICES-003 of the Department of Communications.Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareilsnumeriques de Classe B prescrites dans la norme sur le materiel brouilleur: "Appareils Numeriques,"NMB-003 edictee par le ministre des Communications.MODIFICATION: Any changes or modifications not expressly approved by the grantee of this devicecould void the user's authority to operate the device.Toute modification non approuvée explicitement par le fournisseur de licence de l'appareil peutentraîner l'annulation du droit de l'utilisateur à utiliser l'appareil.Regulatory Information 41
European ComplianceThis product conforms to the following:RoHS Directive 2011/65/EU.EMC Directive 2004/108/EC.Mains operated products for the European market comply with Low Voltage Directive 2006/95/EC andCommission Regulation(s) Implementing Directive 2009/125/EC.Communication / RF wireless products for the European market comply with R&TTE Directive1999/5/EC.Caution:To comply with the Europe CE requirement, this device must be installed with CE certified computerequipment which meet with Class B lmits.All cables used to connect this device must be shielded, grounded and no longer than 3m in length.Operation with non-certified computers or incorrect cables may result in interference to otherdevices or undesired effects to the product.MODIFICATION: Any changes or modifications not expressly approved by Creative Technology Limitedor one of its affliated companies could void the user's warranty and guarantee rights.European ComplianceCe produit est conforme aux normes suivantes :Directive 2004/108/CE sur les émissions électromagnétiques.Directive RoHS 2011/65/UE.Les produits secteur pour le marché européen sont conformes à la Directive sur la faible tension2006/95/CE et à la réglementation de la Commission exécutant la Directive 2009/125/CE.Les produits de communication/sans fil RF destinés au marché européen sont conformes à la directiveR&TTE 1999/5/CE.ATTENTION : pour respecter les critères CE d'Europe, cet appareil doit être installé avec du matérielinformatique certifié CE respectant les limites de la classe B. Tous les câbles utilisés pour connecter cetappareil doivent être blindés, reliés à la terre et ne pas faire plus de 3 m de long. L'utilisationd'ordinateurs non certifiés ou de câbles inappropriés peut entraîner des interférences avec d'autresappareils ou des effets indésirables sur le produit.MODIFICATION : toute modification non approuvée explicitement par Creative Technology Limited oul'une de ses sociétés affiliées peut entraîner l'annulation de la garantie et des droits de garantie del'utilisateur.Conformità alle normative europeeQuesto prodotto è conforme alla seguente normativa:Direttiva EMC 2004/108/CE.Direttiva RoHS 2011/65/UE.I prodotti che funzionano con corrente di rete per il mercato europeo sono conformi alla direttiva bassatensione 2006/95/CE e alla direttiva di implementazione nelle normative europee 2009/125/CE.I prodotti di comunicazione/wireless RF per il mercato europeo sono conformi alla Direttiva R&TTE1999/5/CE.Regulatory Information 42
ATTENZIONE: ai fini della conformità con i requisiti del marchio CE europeo, il dispositivo deve essereinstallato in un computer certificato CE conforme ai limiti di Classe B. Tutti i cavi usati per collegare ildispositivo devono essere schermati, dotati di idonea messa a terra e avere una lunghezza massima di3 metri. L'uso del dispositivo con computer non certificati o cavi non idonei può provocare interferenzead altri dispositivi nonché danneggiare il prodotto stesso.MODIFICHE: eventuali modifiche o alterazioni non espressamente approvate da Creative TechnologyLimited o dalle sue società controllate possono rendere nulli la garanzia e il diritto dell'utente autilizzare il prodotto.Einhaltung der europäischen BestimmungenDieses Produkt erfüllt die folgenden Bestimmungen:EMC-Richtlinie 2004/108/EG.RoHS-richtlinie 2011/65/EU.Netzbetriebene Produkte für den europäischen Markt erfüllen die Niederspannungsverordnung2006/95/EG und der Commission Regulation(s) Implementing-Verordnung 2009/125/EG.Drahtlose Kommunikationsgeräte/Funksender und -empfänger für den europäischen Markt erfüllen dieR&TTE-Richtlinie 1999/5/EG.ACHTUNG: Um die Anforderungen der europäischen CE-Norm zu erfüllen, muss dieses Produkt aneinem CE-geprüften Computer der Klasse B angeschlossen werden.Alle Verbindungskabel zu diesemGerät müssen abgeschirmt und geerdet sein und dürfen nicht länger als 3 m sein. Der Betrieb mit nichtzertifizierten Computern oder nicht ordnungsgemäßen Kabeln kann zu Störungen anderer Geräte oderunerwünschten Auswirkungen auf das Produkt führen.MODIFIZIERUNG: Jegliche Änderung oder Modifizierung des Produkts, die nicht ausdrücklich vonCreative Technology Limited oder einer der zugehörigen Firmen genehmigt worden ist, kann für denBenutzer zum Erlöschen der Garantie und der Gewährleistungsrechte führen.Homologación para EuropaEste producto cumple:la Directiva de compatibilidad electromagnética 2004/108/CE.Directiva RoHS 2011/65/UE.Los productos funcionando con corriente electrica cumplen con la Directiva 2006/95/CE de baja tensióny con la implementación de los requisitos de la Comisión para la directiva 2009/125/CE.Los productos inalámbricos de comunicación o frecuencias de radio para el mercado europeo cumplen laDirectiva 1999/5/CE de equipos de radio y terminales de telecomunicaciones.ATENCIÓN: para cumplir con los requisitos de Homologación para Europa, este dispositivo debeinstalarse con un equipo informático con certificación CE que cumpla los límites de la Clase B. Todos loscables utilizados para conectar este dispositivo deben estar protegidos, conectados a tierra y no tenermás de 3 m de longitud. El funcionamiento del dispositivo con equipos no certificados o cablesincorrectos podría provocar interferencias a otros dispositivos o efectos no deseados al producto.MODIFICACIÓN: los cambios o modificaciones no aprobados expresamente por Creative TechnologyLimited o una de sus empresas afiliadas podrían invalidar la garantía del usuario y los derechos de lagarantía.Europese nalevingDit product voldoet aan de volgende voorschriften:EMC-richtlijn 2004/108/EG.Regulatory Information 43
RoHS-richtlijn 2011/65/EU.Electrische producten voor de Europese markt voldoen aan de Laagspanningsrichtlijn 2006/95/EG en ECand Verordening(en) voor uitvoering van Richtlijn 2009/125/EG.Communicatie- of draadloze RF-producten voor de Europese markt voldoen aan de richtlijn R&TTE1999/5/EG.LET OP: Om te voldoen aan de Europese CE-norm, moet dit apparaat zijn geïnstalleerd incomputerapparatuur die CE-gecertificeerd is voor de Klasse B-limieten. Alle kabels die worden gebruiktom dit apparaat aan te sluiten, moeten zijn afgeschermd en geaard, en mogen niet langer dan 3 meterzijn. Gebruik met niet-gecertificeerde computers of incorrecte kabels kan leiden tot interferentie vanandere apparaten of ongewenste effecten op het product.AANPASSING: Alle wijzigingen of modificaties die niet uitdrukkelijk zijn goedgekeurd door CreativeTechnology Limited of een van de gelieerde maatschappijen, kunnen ertoe leiden dat de rechten van degebruiker met betrekking tot garantie en vrijwaring vervallen.Conformidade EuropeiaEste produto está em conformidade com a seguinte regulamentação:Directiva EMC 2004/108/EC.Directiva RoHS 2011/65/UE.Os produtos com ligação à rede destinados ao mercado europeu estão em conformidade com a directivade baixa voltagem 2006/95/CE. Directiva de Implementação do(s) Regulamento(s) da Comissão2009/125/CE.Os produtos de comunicação/radiofrequência sem fios destinados ao mercado europeu estão emconformidade com a directiva R&TTE 1999/5/CE.ATENÇÃO: De modo a cumprir com os requisitos da marca CE Europeia, este dispsotivo deve serinstalado com equipamento informático com certificação CE que cumpra com os limites de Classe Blimits. Todos os cabos usados para ligar este dispositivo devem ser blindados, ligados à terra e nãodevem exceder os 3m de comprimento. O funcioanemnto com computadores não certificados ou cabosincorrectos pode resultar em interferências em outros dispositivos ou provocar efeitos indesejados noproduto.MODIFICAÇÃO: Quaisquer alterações ou modificações que não sejam expressamente aprovadas pelaCreative Technology Limited ou por uma das suas afiliadas, pode anular a garantia do utilizador e osdireitos inerentes à mesma.Europeisk efterlevnadDenna produkt uppfyller följande:EMC-direktivet 2004/108/EC.RoHS Direktivet 2011/65/EU.Produkter för den europeiska marknaden som drivs via elnätet uppfyller Lågspänningsdirektivet2006/95/EC och Kommissionens regleringsimplementeringsdirektiv 2009/125/EG.Trådlösa kommunikations/RF-produkter för den europeiska marknaden uppfyller R&TTE-direktivet1999/5/EC.VARNING: För att uppfylla CE-kraven i Europa måste denna produkt installeras med CE-certifieraddatorutrustning som uppfyller gränsvärdena för klass B. Alla kablar som används för anslutning avdenna produkt måste vara avskärmade, jordade och får inte vara längre än 3 m. Användning med ickecertifierade datorer eller felaktiga kablar kan leda till interferens på annan utrustning eller oönskadeeffekter på produkten.Regulatory Information 44
MODIFIERING: Alla förändringar och modifieringar som inte är uttryckligen tillåtna av CreativeTechnology limited eller något av dess filialföretag kan göra användarens garanti och garantirättigheterogiltiga.Europeisk samsvarDette produktet er i samsvar med følgende:EMC-direktivet 2004/108/EC.RoHS-Direktivet 2011/65/EU.Elektriske produkter til det europeiske markedet er i samsvar med Lavspenningsdirektivet 2006/95/ECog Økodesigndirektivet 2009/125/EC.Kommunikasjon/RF trådløse produkter til det europeiske markedet er i samsvar med R&TTEdirektivet1999/5/EC.ADVARSEL: For å overholde det europeiske CE-kravet må denne enheten installeres med CEsertifisertdatautstyr som tilfredsstiller klasse B-grensene. Alle kabler som kobles til enheten må være skjermet,jordet og ikke lenger enn 3 m i lengde. Bruk av ikke-sertifiserte datamaskiner eller feil kabler kan føretil forstyrrelse av andre enheter eller uønsket effekt på produktet.MODIFIKASJON: Eventuelle endringer eller modifikasjoner som ikke uttrykkelig er godkjent avCreative Technology Limited eller et av dets tilknyttede selskaper, kan ugyldiggjøre garantien ellergarantirettighetene.Overholdelse af Europæiske regler og standarderDette produkt overholder følgende:EMC-direktivet 2004/108/EC.RoHS-Direktivet 2011/65/EU.Produkter til det Europæiske marked, skal ovberholde Lavspændingsdirektivet 2006/95/EC ogKommissionens forordninger for implementering af direktivet 2009/125/EF.Kommunikations- / RF-trådløse produkter til det Europæiske overholder R&TTE-direktivet 1999/5/EC.ADVARSEL: For at overholde Europe CE-kravet, skal denne enheden installeres med CE-certificeretcomputerudstyr, der opfylder klasse B-grænserne. Alle kabler der anvendes til at tilslutte enheden skalvære skærmede, jordforbundne og ikke længere end 3 m lange. Drift med ikke-certificerede computereog ukorrekte kabler kan medføre interferens for andre enheder eller uønskede effekter på produktet.MODIFIKATION: Enhver ændring eller modifikation, der ikke er udtrykkeligt godkendt af CreativeTechnology Limited eller et associerede selskab, vil gøre brugerens garanti og garanterede rettighederugyldig.Eurooppalainen yhdenmukaisuusTämä tuote täyttää seuraavat tuotemääritykset:TEMC-direktiivin 2004/108/EC.RoHS-direktiivin 2011/65/EU.Euroopan markkinoiden verkkovirtaa käyttävät tuotteet ovat matalajännitedirektiivin 2006/95/EYmukaisia. Euroopan parlamentin ja neuvoston ohjaava direktiivi 2009/125/EY.Euroopan markkinoiden tietoliikenne- ja langattomat radiotaajuustuotteet noudattavat R&TTEdirektiiviä1999/5/EY.Regulatory Information 45
VAROITUS: Jotta tämä laite noudattaisi Euroopan CE-vaatimuksia , tämä laite on asennettavaCEsertifioituun tietokoneeseen, joka noudattaa luokan B rajoituksia. Kaikki tämän laitteen liittämiseenkäytetyt kaapelit tulee suojata ja maadoittaa eivätkä ne saa olla 3 m pidempiä. Luokan rajoituksianoudattamattoman tietokoneen tai vääränlaisten kaapeleiden käyttäminen voi aiheuttaa häiriöitämuihin laitteisiin tai haitata itse laitteen toimintaa.MUOKKAUKSET: Muutokset tai muokkaukset, joita Creative Technology Limited tai sen tytäryhtiöteivät nimenomaisesti ole hyväksyneet, voivat mitätöidä tuotteelle annetun takuun.Evropská shodaTento výrobek splňuje následující směrnice:Směrnice EMC 2004/108/EC.Směrnice RoHS 2011/65/EU.Výrobky napájené z elektrické zásuvky pro evropský trh splňují směrnici o nízkém napětí 2006/95/EC asměrnici komise 2009/125/EC o zavádění předpisů.Komunikační / vysokofrekvenční bezdrátové výrobky pro evropský trh splňují směrnici R&TTE1999/5/EC.UPOZORNĚNÍ: Aby toto zařízení splňovalo evropský požadavek CE, musí být nainstalováno spočítačovým vybavením s certifikátem CE, které splňuje limity pro zařízení třídy B. Veškeré kabelypoužívané pro připojení tohoto zařízení musí být stíněné, uzemněné a nesmí být delší než 3 metry. Připoužívání s necertifikovanými počítači nebo nesprávnými kabely může dojít k rušení jiných zařízenínebo k nežádoucím vlivům na produkt.ÚPRAVY: Jakékoli změny nebo úpravy, které nebyly vysloveně schváleny společností CreativeTechnology Limited nebo některou z jejích dceřiných společností, mohou způsobit propadnutí zárukyuživatele a záručních práv.Zgodność z przepisami europejskimiUrządzenie jest zgodne zdyrektywą EMC 2004/108/EC.Dyrektywa RoHS 2011/65/UE.Urządzenia zasilane z sieci elektrycznej przeznaczone na rynek europejski muszą być zgodne zdyrektywą dotyczącą urządzeń niskonapięciowych 2006/95/EC oraz z dyrektywą wdrażającą komisjiregulacyjnej 2009/125/WE.Urządzenia komunikacyjne / bezprzewodowe wykorzystujące transmisję radiową przeznaczone narynek europejski spełniają warunki dyrektywy RTTE 1999/5/EC.UWAGA: Aby uzyskać zgodność z wymogami europejskiej normy CE urządzenie musi byćzainstalowane wraz ze sprzętem komputerowym mającym certyfikat CE z ograniczeniami klasy B.Wszystkie przewody używane do podłączania niniejszego urządzenia muszą być ekranowane, uziemionei nie dłuższe niż 3 metry. Użytkowanie z komputerami nie posiadającymi certyfikatów lubwykorzystanie niewłaściwych przewodów może powodować zakłócenia pracy innych urządzeń lubopisywanego urządzenia.MODYFIKACJE: Dokonanie jakichkolwiek zmian lub modyfikacji, na które firma Creative TechnologyLimited lub spółki z nią stowarzyszone nie udzielają wyraźnej zgody, może doprowadzić dounieważnienia praw gwarancji i rękojmi użytkownika.Соответствие европейским нормамДанное изделие соответствует следующим стандартам:Regulatory Information 46
EMC Директива 2004/108/EC.RoHS директива 2011/65/EU.Продукция с питанием от сети, поставляемая на европейский рынок, соответствует Директиве понизковольтному оборудованию 2006/95/EC и Имплементирующей директиве постановления (- й)комиссии 2009/125/EC.Коммуникационное/радио- беспроводное оборудование, поставляемое на европейский рынок,соответствует Директиве по оконечному радио- и телекоммуникационному оборудованию1999/5/EC.ВНИМАНИЕ! Для обеспечения соответствия европейским требованиям CE, это устройство должноустанавливаться с компьютерным оборудованием, сертифицированным по стандарту CE иудовлетворяющим нормам класса B. Все кабели, используемые для подключения данногоустройства, должны быть экранированы, заземлены и иметь длину не более 3 м. Работа снесертифицированными компьютерами или неподходящими кабелями может привести квозникновению помех другим устройствам или негативному влиянию на работу самого изделия.ИЗМЕНЕНИЯ КОНСТРУКЦИИЛюбые изменения конструкции, на которые не было полученопрямое разрешение компании Creative Technology Limited или ее дочерней компании, можетпривести к аннуляции гарантии и связанных с нею прав.Európai megfelelőségEz a termék megfelel a következőknek:2004/108/EGK sz., az elektromágneses összeférhetőségre. 2011/65/EU, RoHS.Az Európa területére szánt hálózati termékek megfelelnek az alacsony feszültségre vonatkozó2006/95/EC irányelvnek.Az irányelvet 2009/125/EK végrehajtó bizottsági rendeletek.Az Európa területére szánt, távközlési, illetve rádiófrekvenciás vezeték nélküli termékek megfelelnek arádióés távközlő végberendezésekre vonatkozó 1999/5/EK irányelvnek.FIGYELEM!: Az európai CE követelmények teljesítéséhez ezt a készüléket a B kategóriájú értékeknekmegfelelő, CE minősítésű számítógéppel együtt kell telepíteni. A készülék csatlakoztatására használtvalamennyi kábelnek árnyékoltnak és földeltnek kell lennie, továbbá hosszúsága nem haladhatja meg a3 métert. A nem hitelesített számítógépekkel vagy helytelen kábelekkel való használat más készülékekzavarását vagy a termék nem kívánatos befolyásolását okozhatja.MÓDOSÍTÁS: Minden módosítás vagy változtatás, amit kifejezetten nem hagyott jóvá a CreativeTechnology Limited vagy valamelyik leányvállalata, érvénytelenítheti a készülék garanciáját ésfelhasználó garanciális jogait.Ευρωπαϊκή συμμόρφωσηΤο παρόν προϊόν συμμορφώνεται με τα παρακάτω:Οδηγία ΗΜΣ 2004/108/EΚ.Οδηγία RoHS 2011/65/EE.Τα προϊόντα που λειτουργούν με ρεύμα για την ευρωπαϊκή αγορά συμμορφώνονται με την Οδηγία περίχαμηλής τάσης 2006/95/EΚ και τους κανονισμούς της επιτροπής που υλοποιούν την οδηγία 2009/125/EK.Τα ασύρματα προϊόντα επικοινωνιών / RF για την ευρωπαϊκή αγορά συμμορφώνονται με την οδηγίαR&TTE 1999/5/EK.ΠΡΟΣΟΧΗ: Για τη συμμόρφωση με τις απαιτήσεις του ευρωπαϊκού CE, αυτή η συσκευή θα πρέπει ναεγκατασταθεί σε εξοπλισμό υπολογιστή με πιστοποίηση CE ο οποίος πληροί τα όρια της κατηγορίας Β.Regulatory Information 47
Όλα τα καλώδια που χρησιμοποιούνται για τη σύνδεση της συσκευής θα πρέπει να είναι θωρακισμένα,γειωμένα και να μην υπερβαίνουν σε μήκος τα 3μ. Η λειτουργία με μη πιστοποιημένους υπολογιστές ήλάθος καλώδια μπορεί να οδηγήσει σε παρεμβολές με άλλες συσκευές ή ανεπιθύμητες επιδράσεις στοπροϊόν.ΤΡΟΠΟΠΟΙΗΣΗ: Οι όποιες αλλαγές ή τροποποιήσεις που δεν έχουν εγκριθεί ρητά από την CreativeTechnology Limited ή κάποια από τις θυγατρικές της ενδέχεται να ακυρώσουν την εγγύηση του χρήστηκαι τα δικαιώματα που απορρέουν από αυτήνEuropos Sąjungos atitiktisŠis gaminys atitinka šiuos reikalavimus:„Elektromagnetinės atitikties“ („EMC“) direktyva 2004/108/EC.RoHS direktyva 2011/65/ES.Produktai, kurie veikia maitinami iš elektros tinklo, skirti Europos rinkai, atitinka Žemos įtamposdirektyvą 2006/95/EB.Komisijos reglamentas(-ai) dėl Direktyvos 2009/125/EB įgyvendinimo.Europos Sąjungos rinkai skirti ryšių / radijo dažnių bevieliai gaminiai atitinka 1999/5/EB direktyvą „Dėlradijo ryšio įrenginių ir telekomunikacijų galinių įrenginių bei abipusio jų atitikties pripažinimo“.ATSARGIAI: Tam, kad šis prietaisas atitiktų Europos Sąjungos „CE“ reikalavimus, jis turi būti įdiegtas į„CE“ sertifikuotą kompiuterinę įrangą, atitinkančią „B“ klasės ribas. Visi su šiuo prietaisu naudojamilaidai turi būti ekranuoti, įžeminti ir neviršyti 3 m ilgio. Nesertifikuotų kompiuterių ar netinkamų laidųnaudojimas gali tapti trikdžių kitiems prietaisams arba nepageidaujamų šio gaminio veikimo pasekmiųpriežastimi.MODIFIKAVIMAS: Bet kokie pakeitimai ar modifikavimai neturint aiškiai patvirtinto „CreativeTechnology Limited“ ar vienos iš su ja susijusių bendrovių leidimo gali panaikinti vartotojo garantiją irgarantijos teises.Europeisk överensstämmelseDenna produkt uppfyller följande:EMC-direktivet 2004/108/EC.RoHS-direktivet 2011/65/EU.Produkter som ansluts till elnätet och som är avsedda för den europeiska marknaden uppfyllerlågspänningsdirektivet 2006/95/EC.Nariadenia komisie, ktorými sa vykonáva smernica 2009/125/ES.Trådlösa kommunikationsprodukter/RF-produkter för den europeiska marknaden uppfyllerR&TTEdirektivet 1999/5/EC.VARNING!: För att överensstämma med de europeiska CE-kraven måste denna enhet installerastillsammans med CE-godkänd utrustning som uppfyller Klass B-gränserna. Alla kablar som används vidanslutning av denna enhet måste vara skärmade och jordade samt inte vara längre än 3m. Användningtillsammans med icke-godkända datorer eller felaktiga kablar kan orsaka störningar i andra enhetereller oönskade effekter i denna produkt.ÄNDRING: Varje ändring eller modifiering som inte uttryckligen godkänts av Creative TechnologyLimited eller ett av dess dotterbolag kan göra att användarens garanti eller garantirättigheter upphöratt gälla.Avrupa UyumuBu ürün aşağıdakilere uygundur:Regulatory Information 48
2004/108/EC EMC (Elektromanyetik Uyumluluk) Yönetmeliği.2011/65/EU RoHS (Tehlikeli Maddelerin Kısıtlanması) YönetmeliğiAvrupa piyasasına yönelik, elektrik şebekesi tarafından çalıştırılan ürünler 2006/95/EC Alçak GerilimYönetmeliği (LVD ) ve 2009/125/EC Enerji ile İlgili Ürünlerin Çevreye Duyarlı Tasarımına İlişkinYönetmeliğe uygundur.Avrupa piyasasına yönelik İletişim / RF kablosuz ürünleri Yönetmelik R&TTE 1999/5/EC ile uyumludur.DİKKAT: Avrupa CE gereksinimleriyle uyumlu olması için bu cihazın, B Sınıfı sınırlarına uygun olan CEsertifikalı bilgisayar donanımları ile birlikte kurulması gerekir. Bu cihazı bağlamak için kullanılan tümkabloların koruyuculu ve topraklanmış olması ve 3 metreden uzun olmaması gerekir. Sertifikalıolmayan bilgisayarlarla veya yanlış kablolarla birlikte kullanılması, diğer cihazların düzgünçalışmamasına veya üründe istenmeyen etkiler görülmesine neden olabilir.DEĞİŞİKLİKLER: Creative Technology Limited veya bağlı şirketlerinden biri tarafından açıkçaonaylanmamış tüm değişiklikler kullanıcının garanti ve teminat haklarını geçersiz kılabilir.Regulatory Information 49
Ukraine RoHS StatementОбладнання відповідає вимогам Технічного регламенту щодо обмеження використання деякихнебезпечних речовин в електричному та електронному обладнанні, затвердженого постановоюКабінету Міністрів України від 3 грудня 2008 № 1057Notice for SingaporeNotice for JapanRecycling Rechargeable BatteryLithium rechargeable battery is a resource that can be recycled.lFor recycling of embedded lithium rechargeable batteries inside Creative products, please do notattempt to remove the battery from the device. For recycling information and instruction, please goto Creative Media K K customer support at http://jp.creative.com/support/contact/ (in Japanese)lFor recycling of replaceable (removable) lithium rechargeable batteries:oIt is recommended to remove the rechargeable batteries when they are fullydischarged.oPrecaution needs to be taken on metal parts of the battery by covering them withisolation materials such as scotch tape.oRefer to the homepage of JBRC for information on recycling and recovery ofrechargeable batteries and supporting shops. (http://www.jbrc.com/)Notice for KoreaB급기기(가정용방송통신기자재)이기기는가정용(B급)전자파적합기기로서주로가정에서사용하는것을목적으로하며,모든지역에서사용할수있습니다.Regulatory Information 50
Vietnam RoHS StatementThis product is in compliance with Circular 30/2011/TTBCT of the Ministry of Trade of the SocialistRepublic of Vietnam (“Circular”), it does not contain the following substances in concentration greaterthan the Maximum Limit value as specified in the Circular.Substance Maximum Limit (ppm) 1, 2llead 1000lmercury 1000lcadmium 100lhexavalent chromium 1000lpolybrominated biphenyls (PBB) 1000lpolybrominated diphenyl ethers (PBDE) 10001Maximum Limit does not apply to applications exempted from the Circular.2Maximum Limit refers to concentration by weight in homogeneous materials.Regulatory Information 51
License and CopyrightInformation in this document is subject to change without notice and does not represent a commitmenton the part of Creative Technology Ltd. No part of this manual may be reproduced or transmitted in anyform or by any means, electronic or mechanical, including photocopying and recording, for any purposewithout the written permission of Creative Technology Ltd.Copyright © 2014 Creative Technology Ltd. All rights reserved. Creative, the Creative logo, SoundBlasterAxx, the Sound BlasterAxx logo, SBX Pro Studio, the SBX logo, CrystalVoice and SuperMegaphone are trademarks or registered trademarks of Creative Technology Ltd. in the United Statesand/or other countries. iPhone is a trademark of Apple Inc., registered in the U.S. and other countries.Android is a trademark of Google Inc. Windows is a registered trademark of Microsoft Corporation in theUnited States and other countries. The Bluetooth®word mark and logos are registered trademarksowned by Bluetooth SIG, Inc. and any use of such marks by Creative Technology Ltd is under license.Other trademarks and trade names are those of their respective owners. All specifications are subjectto change without prior notice. Use of this product is subject to a limited hardware warranty. Actualcontents may differ slightly from those pictured. The software included in this packaging may not beused separately from the hardware. Before using the software, you must agree to be bound by theterms and conditions of the end user license agreement.Version 1.0October 2014License and Copyright 52

Navigation menu