Creative Labs EF0450 CREATIVE WP-300 BLUETOOTH HEADPHONE User Manual

Creative Labs Inc CREATIVE WP-300 BLUETOOTH HEADPHONE Users Manual

Users Manual

Creative WP-300 User Manual.(Model number EF0450) Illustration1 Illustration2Thank you for selecting Creative’s PURE WIRELESS Headphones. This documentation aims to guide you inmaking full use of the headphones. Fully charge the headphones before first use. Then you need to “pair”the headphones once with your Bluetooth audio device before enjoying subsequent automatic playback.Charging headphones• Connect the Left earcup to your laptop or computer using the supplied USB cable• On the Left earcup, the indicator lights up in Red. When fully charged, this indicator turns Green• You can listen and operate the headphones while chargingPairing new audio devices• Press and hold the Power/Pair button for more than 4 seconds on the Right earcup until the indicatorlights up in Blue and blinking rapidly• Turn on Bluetooth search function on your audio device• Select “Creative WP-300 Headphones” and if prompted for a Passcode, key in “0000”• Once paired, the Blue indicator on the Right earcup blinks slowlyPlayback from audio devices• Turn on Bluetooth function on your paired audio device• Press and hold the Power/Pair button on the Right earcup until the indicator lights up in Green and blinksslowly. The headphones automatically searches for the last paired device. Once connected, the indicatorturns Blue and blinks slowly. In certain cases, you may need to press the Play button to establishconnection.• You can now Play or Pause music playback, skip forward or reverse tracks, and make volumeadjustmentsClear or reset headphones• Press and hold the Volume Down "-" and Power/Pair buttons for more than 6 seconds to clear the pairedaudio devices• If the headphones malfunction, reset it by supplying USB power, then press the Volume Up "+" andPower/Pair buttons for about 1 secondAutomatic shutdown• Once the headphones are powered on, if it is unable to connect to the last paired device or failed to pairwith a new device within 5 minutes, the headphones will automatically shut down.1234576
List of button, indicator and connector functionsButton Function Power / Pair Press and hold for about 2 seconds to power on theheadphones. Press and hold for about 4 seconds topower off the headphones. In off mode, press and holdfor more than 4 seconds to activate Pairing mode. Play / Pause Press to play. Press again to pause playback. Next, Forward / Previous,Rewind TrackPress to change to the next or previous track. Press andhold to fast forward or reverse track (this function isdevice dependent). Volume Up / Volume Down Press ‘+’ to increase or press ‘-‘ to decrease volume. Abeep tone is emitted at maximum volume level. Pauseheadphones to mute.Light Indicator Function Right earcup light indicator Green and blinks slowly: automatically searching andattempts to connect to the last paired device.Blue and blinks slowly: connected to a paired device.Blue and blinks rapidly: in pairing mode and is ready topair with a new device.Red and blinks twice: powering off the headphones.Red and blinks slowly: low battery, charge headphonessoonest. This is accompanied by a beep tone every 2minutes. Left earcup light indicator Red: charging headphones.Green: headphones fully charged.Connector Function Micro-USB charging connector Use the supplied USB cable for charging the headphonesvia a laptop or computer.1234567
Technical Specifications:• Driver: 34mm Neodymium magnet• Frequency Response: 18Hz ~ 22kHz• Impedance: 32ohms• Sensitivity (1kHz): 102dB/mW• Wireless Technology: Bluetooth 2.1 + EDR (Enhanced Data Rate)• Bluetooth Profiles: A2DP (Wireless stereo Bluetooth), AVRCP (Bluetooth remote control)• Audio Codec: apt-X, SBC• Operating Frequency: 2402 – 2480 MHz• Operating Range: Up to 10m / 33ft• Power Supply: Rechargeable Lithium Ion battery, 3.7V, 240mAh• Charge / Playback time: 1 hour / 8 hours• Net Weight: 107g / 3.8oz
Safety InformationRefer to the following information to use your product safely, and to reduce the chance of electric shock,short-circuiting, damage, fire, hearing impairment or other hazards. Improper handling may void the warrantyfor your product. For more information, read the warranty available with your product.• Do not dismantle or attempt to repair your product. Refer all servicing to authorized repair agents.• Do not expose your product to temperatures outside the range of 0°C to 45°C (32°F to 113°F).• Do not pierce, crush or set fire to your product.• Keep your product away from strong magnetic objects.• Do not subject your product to excessive force or impact.• Do not expose your product to water or moisture. If your product is moisture-resistant, take care not toimmerse your product in water or expose it to rain.Earphones• When a conductive apparatus such as earphones, is used in close proximity with a CRT television orCRT monitor, the latter may emit an electrostatic discharge. This electrostatic discharge can be felt as astatic shock. While this static shock is usually harmless, it is good practice to avoid close contact withCRT devices when using earphones.• Do not listen to audio on your earbuds or headphones at high volume for prolonged periods of time ashearing loss may result. For users in the United States, go to www.hei.org for more information.• Do not listen to your audio device at high volume when driving, cycling or crossing the road, especially inheavy traffic, or in any other traffic condition where such use will hinder safe travel on the roads. Werecommend that consumers be extremely cautious when using this device on the road.Embedded Battery• Do not attempt to remove the embedded battery. The product must be disposed of according to localenvironmental regulations. To replace the battery, return your product to your regional support office. Forproduct service information, go to www.creative.com.• Do not expose to excessive heat such as sunshine, fire or the likeCAUTION: Risk of explosion if battery is replaced by incorrect types.Bluetooth Wireless Device• The shortwave radio frequency signals of a Bluetooth device may impair the operation of other electronicand medical devices.• Switch off the device where it is prohibited. Do not use the device in medical facilities, aircraft, refuelingpoints, close to automatic doors, automatic fire alarms or other automatically controlled devices• Keep this device at least 20cm from pacemakers and other medical devices. Radio waves may impairthe operation of pacemakers and other medical devices.
California Proposition 65 StatementWARNING: Handling this product may expose you to chemicals known to the State of Carlifornia to causecancer and birth defects or other reproductive harm. Wash hands after handling.Explanatory Note:California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65) requires special productlabeling for products containing certain chemicals known to the State of California to cause cancer, birthdefects or other reproductive harm. Creative has chosen to provide a warning based on its knowledge aboutthe presence of one or more listed chemicals without attempting to evaluate the level of exposure. WithCreative’s products, the exposure may be below the Proposition 65 level of concern, or could even be zero.However, out of an abundance of caution, Creative has elected to place the Proposition 65 warning on itsproducts.Compliance And Regulatory InformationThe following sections contain notices for various countries:CautionThis product is intended for use with FCC/CE certified computer equipment. Please check theequipment operating/installation manual and/or with the equipment manufacturer to verify/confirmif your equipment is suitable prior to the installation or use of the product.Notice for USAFCC Part 15: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference thatmay cause undesired operation.CautionTo comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, thisdevice must be installed with computer equipment certified to comply with Class B limits.All cables used to connect to the computer and peripherals must be shielded and grounded.Operation with non-certified computers or non-shielded cables may results in interference to radioor television reception.ModificationAny changes or modifications not expressly approved by the grantee of this device could void theuser’s authority to operate the device.Federal Communication Commission (FCC) Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Thistransmitter must not be co-located or operating in conjunction with any other antenna or transmitter.It passes the SAR test or OET 65 standard.
Notice for CanadaThis Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.Operation is subject to the following two conditions:(1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired operation ofthe device.Son Fonctionnement est soumis aux deux conditions suivantes:(1) Le matériel ne peut étre source D'interférences et(2) Doit accepter toutes les interférence reques, Y compris celles pouvant pouvant provoquer unfonctionnement indésirable.Canadian Class B StatementThis digital device does not exceed the Class B limits for radio noise emissions from digitalapparatus as set out in the interference-causing equipment standard entitled "Digital Apparatus,"ICES-003 of the Department of Communications.Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareilsnumeriques de Classe B prescrites dans la norme sur le materiel brouilleur: "AppareilsNumeriques," NMB-003 edictee par le ministre des Communications.Modification:Any changes or modifications not expressly approved by the grantee of this device could void theuser's authority to operate the device.Toute modification non approuvée explicitement par le fournisseur de licence de l'appareil peutentraîner l'annulation du droit de l'utilisateur à utiliser l'appareil.

Navigation menu