Creative Labs MF8240 Creative X-Fi Sonic Carrier Subwoofer User Manual

Creative Labs Inc Creative X-Fi Sonic Carrier Subwoofer

Contents

User Manual

Download: Creative Labs MF8240 Creative X-Fi Sonic Carrier Subwoofer User Manual
Mirror Download [FCC.gov]Creative Labs MF8240 Creative X-Fi Sonic Carrier Subwoofer User Manual
Document ID3377382
Application IDrIsf8xsfdv7XaEN2Nuu5XQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize36.57kB (457172 bits)
Date Submitted2017-05-02 00:00:00
Date Available2017-05-02 00:00:00
Creation Date2017-04-19 12:03:58
Producing SoftwareMicrosoft® Office Word 2007
Document Lastmod2017-04-19 12:03:58
Document TitleUser Manual
Document CreatorMicrosoft® Office Word 2007
Document Author: Patrick Voo Peh Liang

Additional Safety and Regulatory information for
CREATIVE X-FI SONIC CARRIER & CREATIVE X-FI SONIC
CARRIER SUBWOOFER
Regulatory Information
The following sections contain notices for various countries.
CAUTION:
This product is intended for use with FCC/CE certified computer equipment. Please check the
equipment operating/installation manual and/or with the equipment manufacturer to verify/confirm
if your equipment is suitable prior to the installation or use of the product.
Notice for the USA
Federal Communication Commission (FCC) Interference Statement
FCC Part 15: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules,
this device must be installed with computer equipment certified to comply with Class B limits.
All cables used to connect to the computer and peripherals must be shielded and grounded.
Operation with non-certified computers or non-shielded cables may result in interference to radio or
television reception.
MODIFICATION: Any changes or modification not expressly approved by the grantee of this device
could void the user's authority to operate the device.
Federal Communication Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated within minimum distance 20cm
between the radiator & your body. The transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
DECLARATION OF CONFORMITY
According to the FCC96 208 and ET95-19
Manufacturer/Importer’s Name:
Manufacturer/Importer’s Address:
Creative Labs, Inc.
1901 McCarthy Boulevard
Milpitas, CA. 95035
Tel: (408)428-6600
declares under its sole responsibility that the product
Trade Name:
Model Number:
Creative
MF8235 & MF8240
has been tested according to the FCC / CISPR22 requirement for Class B
devices and found compliant with the following standards:
EMI/EMC: ANSI C63.4 & C63.10, FCC Part 15 Subpart B, C & E
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including Interference
that may cause undesirable operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
Supplementary Information:
Compliance Manager
Creative Labs, Inc.
March 31, 2017

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Language                        : zh-CN
Tagged PDF                      : Yes
Author                          : Patrick Voo Peh Liang
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2017:04:19 12:03:58+08:00
Modify Date                     : 2017:04:19 12:03:58+08:00
Producer                        : Microsoft® Office Word 2007
EXIF Metadata provided by EXIF.tools
FCC ID Filing: IBAMF8240

Navigation menu