Creative Sound Blaster Audigy 2Zs Users Manual A2 ZS & Platinum Front

2ZS to the manual ec7cd3ef-63c0-48ef-894f-ac2fb4d3f014

: Creative Creative-Sound-Blaster-Audigy-2Zs-Users-Manual-393355 creative-sound-blaster-audigy-2zs-users-manual-393355 creative pdf

Open the PDF directly: View PDF .
Page Count: 1

Download
Open PDF In Browser	View PDF

SOUND BLASTER AUDIGY 2 ZS and AUDIGY 2 ZS PLATINUM SETUP

What You Need
TAD

CD_IN

AUX_IN

SB1394

For Audigy 2 ZS Platinum only

CD_SPDIF

AUD_EXT

JOYSTICK

Sound Blaster Audigy 2 ZS audio card

Joystick/MIDI bracket
(with ribbon cable)

Digital CD audio cable

Phillips-head screwdriver
(not included)

1

Screws for Platinum Drive

For Audigy 2 ZS Platinum only

Remove 5¼" drive
bay front panel

PCI slot

RESET

For Audigy 2 ZS Platinum only
Connect to system
power unit

c

Connect power
splitter cable

Insert Sound
Blaster Audigy 2 ZS
audio card

CD
_IN

SB
13
94

Connect
Internal
FireWire
(IEEE1394)
cable

CD
_S
PD
IF

PO
RT

JOYSTICK

Connect Joystick/
MIDI bracket ribbon
cable (optional)

AUD_EXT

1

e

Platinum Drive

AU
X_
IN

Attach Joystick/
MIDI bracket

PCI Slot

JP1
J5

J1

Red stripe

Secure
Platinum
Drive with
screws
provided.

Insert
Platinum
Drive into
drive bay

Connect
AD_EXT cable

To prevent permanent damage, use only:
- the AD_EXT cable with the AD_EXT connector
- the Audigy 2 ZS audio card with the Platinum Drive.
Do not force any cable into a connector. This can cause
permanent damage to your hardware.

CD/DVD-ROM drive

d
Digital CD audio
cable for digital CD
audio output

OR

Analog CD audio
cable (available
separately) for
analog CD audio
output

Your Platinum Drive is capable of supporting both dynamic
and condenser microphones. By default, your Platinum
Drive is set for use with a condenser microphone. To use a
dynamic microphone, fit the provided shunt onto Jumper
JP1 of your Platinum Drive.

f

Connect Internal FireWire
(IEEE 1394) cable
TAD

CD_IN

AUX_IN

SB1394

Red stripe

CD_SPDIF

Shunt
CD_IN

AUX_IN

SB1394

AUD_EXT

JOYSTICK

TAD

CD_SPDIF

SB1394

AUD_EXT

JOYSTICK

SB1394

Up to two drives can be
connected simultaneously to
the Audigy 2 ZS, using both the
AUX_IN (analog) and CD_SPDIF
(digital) connectors.

Jumper

Audigy 2 ZS
audio card

Connect AD_EXT
cable

Installing Software

Useful Information

Installing Sound Blaster Audigy 2 ZS drivers and applications

User's Guide (on CD)

1. After you have installed your hardware, turn on your computer.
Windows automatically detects the audio card.
2. When prompted for the audio drivers, click the Cancel button.
3. Insert the Sound Blaster Audigy 2 ZS Installation and Applications CD into your
CD-ROM drive. Your CD should start automatically. If it does not, follow the steps
below:
i. Double-click the My Computer icon.
Alternatively, click Start → My Computer.
ii. Right-click the CD-ROM/DVD-ROM drive icon, and then click AutoPlay.
4. Follow the instructions on the screen to complete the installation.
5. When prompted, restart your system.

For more information, refer to the User's Guide (on CD).
Go to Start → Programs → Creative → Sound Blaster Audigy 2 ZS→ Documentation →
Online Manual.

Uninstalling drivers and applications
Refer to the Installing Software chapter in the User's Guide (on CD).
These instructions are applicable to all Windows operating systems.
You can use Creative Diagnostics to test the software and hardware installation.
Go to Start → Programs → Creative → Sound Blaster Audigy 2 ZS → Creative Diagnostics.
PN 03SB000000030 Rev.A

Shunt

Installing Hardware

TA
D

3

AD_EXT cable

Remove metal brackets

With Compact Disc Digital Audio (CDDA)
extraction enabled on your computer's operating
system, you do not have to use an audio cable to
connect your drive to your audio card. For more
information, refer to the User's Guide (on CD). Go to
d:\manual\\manual.chm (replace d:\
with your CD-ROM drive letter and  with
the language that the document is in).

a

b

Internal FireWire®
(IEEE® 1394) cable

Power splitter cable

Preparing Your
Computer

Remove any audio card in your
computer and uninstall its software.
Disable any on-board audio device
in your computer.
Turn off your computer and all
peripheral devices before removing
the computer cover.

2

Sound Blaster Audigy 2 ZS
Platinum Drive

Digital output sampling rate
Make sure you select the sampling rate of the PCM SPDIF output of your Digital Out connector
to match the requirements of your receiving device. The choices available are 48 kHz or 96 kHz.
If you do not hear any sound from your digital speakers or experience intermittent hissing,
you may need to select a lower digital output sampling rate.
To select the digital output sampling rate:
1. In Windows Control Panel, double-click the AudioHQ icon.
2. In the AudioHQ window, double-click the Device Controls icon.
3. Click the Sampling Rate tab.
4. In the Digital Output Sampling Rate list, click the required sampling rate.
For more technical updates, go to http://www.soundblaster.com



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:fbda1c8b-c841-4e52-b8cd-98ad0355b07c
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2005:12:13 17:02:20+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2005:12:13 17:02:20+08:00
Document ID                     : uuid:bd36fa4c-477a-456d-878f-700e37180100
Format                          : application/pdf
Title                           : A2 ZS & Platinum front.ai
Creator                         : mavis_lee
Author                          : mavis_lee

EXIF Metadata provided by EXIF.tools