Crestron Electronic Ilux Clsi C6 Users Manual Addendum For D5855 DOC. 5915

CLSI-C6M to the manual f1d84738-9c17-483d-a0ea-f926375b48f4

: Crestron-Electronic Crestron-Electronic-Ilux-Clsi-C6-Users-Manual-533787 crestron-electronic-ilux-clsi-c6-users-manual-533787 crestron-electronic pdf

Open the PDF directly: View PDF .
Page Count: 2

Crestron CLS/CLSI-C6 & CLS/CLSI-C6M iLux™ Lighting System

ilux™ Lighting System:

CLS/CLSI-C6 & CLS/CLSI-C6M

Purpose

The purpose of this addendum is to provide correction to a diagram and provide

additional information not supplied with the latest version of the CLS/CLSI-C6/C6M

Operations Guide (Doc. 6347). Specifically, this addendum:

•

•

Corrects the hardware hookup diagram on page 11.

Adds a note on page 16 defining which load types to choose when

using expansion modules.

Correction of Hookup Diagram

The following diagram replaces the one that follows the paragraph on page 11

describing hardware hookup procedures. The diagram removes specific rating

information for the circuit breaker supplying power to the iLux unit, and instead

refers to the specifications to determine the appropriate rating. The diagram also

includes information on the use of extension modules with the units.

Addendum #1 for DOC. 6347B ilux™ Lighting System: CLS/CLSI-C6 & CLS/CLSI-C6M • 1

iLux™ Lighting System Crestron CLS/CLSI-C6 & CLS/CLSI-C6M

Crestron Electronics, Inc. Addendum #1 for DOC. 6347B

Addition of Note

Add the following at the beginning of page 16. The note defines the selection of load

types when using expansion modules as loads on an iLux lighting system.

NOTE: When using an expansion module for dimmed loads, choose the

Incandescent load type; for non-dimmed loads, choose Non-dim.

NOTE: For some expansion modules, low-end levels can be set either on the iLux

unit or directly on the expansion module.

15 Volvo Drive Rockleigh, NJ 07647 05.08

Tel: 888.CRESTRON

Fax: 201.767.7576 Specifications subject to

www.crestron.com change without notice.