Crestron Electronics CWD6922 Two-Way RF Transceiver Module User Manual Manual CWD6922

Crestron Electronics Inc Two-Way RF Transceiver Module Manual CWD6922

UserManual.wiki >

Crestron Electronics >

CWD6922 User Manual

Manual

Crestron CWD6922 Two-Way RF Transceiver Module Operations Guide

Crestron CWD6922 Two-Way RF Transceiver Module Operations Guide - DOC. Contents • i Contents Two-Way RF Transceiver Module: CWD6922 ............................................. 1 Functions and Features ......................................................................................................... 1 Specifications ....................................................................................................................... 2 Physical Description ............................................................................................................. 2 Setup.................................................................................................................................... 4 Labeling ............................................................................................................................... 4 Documentation ..................................................................................................................... 4

Crestron CWD6922 Two-Way RF Transceiver Module Operations Guide - DOC. Two-Way RF Transceiver Module: CWD6922 • 1 • 2.4 GHz frequency band, IEEE 802.15.4 specification • Range from 3 feet to 100 ft. • Operates on one of sixteen available channels to establish optimal signal quality Two-Way RF Transceiver Module: CWD6922 Functions and Features The CWD6922 (hereafter referred to as “module”) is a two-way radio frequency (RF) module that utilizes the 2.4 GHz frequency band to communicate with other devices. The module operates according to the IEEE 802.15.4 specification and can be configured to minimize the possibility of interference with other devices. The module receives RF signals from one or more Crestron devices and can transmit these signals over the air for further processing (depending on the application). Functional Summary

Two-Way RF Transceiver Module Crestron CWD6922 2 • Two-Way RF Transceiver Module: CWD6922 Operations Guide - DOC. Specifications The table below is a summary of specifications for the CWD6922. Specifications of the CWD6922 SPECIFICATION DETAILS Power Requirements 0. 825 Watts (5VDC @ 0.165A) Operating Frequency 2400 MHz to 2483.5 MHz (802.15.4 compliant) Operating Ranges¹ Minimum Distance Maximum Distance Indoors (without repeater device) 3 ft 100 ft Available Channels 16 (numbered 11 through 26 per 802.15.4) Antenna Chip Dimensions Width: 1.88 in (0.477 cm) Height: 0.82 in (0.208 cm) Depth: 0.100 in (0.254 cm) 1. The location and orientation of the module are important factors in the RF performance. With the unit located outside of any metal enclosures, the antenna is adjusted to achieve the best range. The range is dependent on its placement and the building in which it is used. The construction of the building, obstructions, and RF interference from other devices are factors determining the effective range of the unit. To prevent unit-to-unit RF interference, multiple modules operating at the same frequencies should not be installed within 3-5 feet of each other. Physical Description The module, shown below, consists of various components attached to a printed circuit board. Physical View of CWD6922

Crestron CWD6922 Two-Way RF Transceiver Module Operations Guide - DOC. Two-Way RF Transceiver Module: CWD6922 • 3 CWD6922 Detail Views Power/I-O An edge connector provides power to the module as well as serial communications between the module and wired devices. Refer to the following table for pin assignments of the module interface connector. Power/I-O Pinout Signals Pin # Signal Pin # Signal Pin # Signal Pin # Signal 1 +5v 9 Reserved GPIO 24 RESET 32 MISO 2 GND 10 Reserved GPIO 25 Reserved ADC1 33 CONFIG1 3 GPIO PWMA 11 GND 26 Reserved ADC2 34 CONFIG2 4 GPIO PWMB 12-16 Reserved 27 Reserved ADC3 35 Reserved GPIO 5 Reserved GPIO 17-20 GND 28 GND 36 GND 6 Reserved GPIO 21 UART RX 29 Reserved GPIO 62 GND 7 Reserved GPIO 22 UART TX 30 SCLK 63 +5v 8 Reserved GPIO 23 Reserved GPIO 31 MOSI

Two-Way RF Transceiver Module Crestron CWD6922 4 • Two-Way RF Transceiver Module: CWD6922 Operations Guide - DOC. Setup Hardware Hookup Refer to the /I-O Pinout Signals table which shows the connections made to the module. NOTE: To prevent unit-to-unit RF interference, multiple modules operating at the same frequencies should not be installed within three to five feet of each other. Labeling If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: EROCWD6922” or “Contains FCC ID: EROCWD6922.” Any similar wording that expresses the same meaning may be used. Documentation The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product. The users manual for OEM integrators must include the following information in a prominent location “IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”

Crestron CWD6922 Two-Way RF Transceiver Module Operations Guide - DOC. Two-Way RF Transceiver Module: CWD6922 • 5 This page is intentionally left blank

Crestron Electronics, Inc. Operations Guide – DOC. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON 04.10 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.