Crestron Electronics MP-FSMIC Wireless Microphone with Frequency Hopping Transmitter User Manual MP FSMIC IG 7166Ar
Crestron Electronics Inc Wireless Microphone with Frequency Hopping Transmitter MP FSMIC IG 7166Ar
Users Manual
Crestron MP-FSMIC
FreeSpeech™ Wireless Microphone
Installation Guide
Crestron Electronics, Inc. Installation Guide - DOC. 7166
15 Volvo Drive Rockleigh, NJ 07647 (2030245)
Tel: 888.CRESTRON 06.11
Fax: 201.767.7576 Specifications subject to
www.crestron.com change without notice.
SPECIFICATION
Wireless Communication
RF 2.4 GHz ISM Device; 79 Channels FHSS (2402
to 2480 MHz)
IR 38 kHz
Range (typical) 50 ft (~15 m) indoor, subject to site-specific
conditions (requires MP-FS-RX1 or MP-FS-RX2
receiver)*
Battery
Battery Type Lithium Ion Polymer, 3.7 Volt, 180 mAh
Usage per Charge 6 hours
Charging Time 2 hours
Cycle life >500 cycles (80% capacity)
(Requires MP-FSDS2 docking station/charger)*
Environmental
Temperature 41° to 104° F (5° to 40° C)
Humidity 10% to 90% RH (non-condensing)
Enclosure Plastic, matte black, includes magnetic clip for
lapel or lanyard attachment
Dimensions
Height 2.10 in (54 mm)
Width 1.00 in (26 mm)
Depth 0.95 in (24 mm)
Weight 0.7 oz (20 g)
Included Accessory
MP-FS-LANYARD Lanyard for MP-FSMIC
Available Accessories
MP-FS-RX1 FreeSpeech Single-Channel Wireless Mic Receiver
MP-FS-RX2 FreeSpeech Dual-Channel Wireless Mic Receiver
MP-FS100_PAK FreeSpeech Single-Channel Wireless Mic System
Package
MP-FS200_PAK FreeSpeech Dual-Channel Wireless Mic System
Package
MP-FSDS2 FreeSpeech Dual Wireless Mic Docking Station/
Charger
MP-FSTTS Tabletop Stand for MP-FSMIC
DETAILS
SPECIFICATIONS
Specifications for the MP-FSMIC are listed in the following table.
MP-FSMIC Specifications
Further Inquiries
If you cannot locate specific information or have questions after reviewing this
guide, please take advantage of Crestron's award winning customer service
team by calling Crestron® at 1-888-CRESTRON [1-888-273-7876]. For
assistance in your region, please refer to the Crestron Web site
(www.crestron.com) for a listing of Crestron worldwide offices.
You can also log onto the online help section of the Crestron Web site
ww.crestron.com/onlinehelp) to ask questions about Crestron products.
First-time users will need to establish a user account to fully benefit from all
available features.
Future Updates
As Crestron improves functions, adds new features and extends the
capabilities of the MP-FSMIC, additional information may be made available as
manual updates. These updates are solely electronic and serve
as intermediary supplements prior to the release of a complete technical
documentation revision.
Check the Crestron Web site periodically for manual update availability and its
relevance. Updates are identified as an “Addendum” in the Download coumn.
Crestron FreeSpeech™ systems provide a very simple and affordable
solution for adding speech reinforcement as part of a complete classroom
media presentation system. Compact and lightweight, the MP-FSMIC can be
clipped to a lapel, hung around the neck, or placed in a tabletop stand*. As
part of a complete FreeSpeech wireless mic system, the MP-FSMIC affords
reliable and hassle-free operation. Simply press the ON button and go.
Advanced FreeSpeech RF/IR wireless technology ensures consistent
performance with complete freedom of movement — and minimized risk of
noise or feedback. The infrared “beacon” signal prevents interference
between multiple FreeSpeech systems in adjacent rooms, and even shuts
the mic off automatically if the instructor leaves the room with the mic on.
An internal rechargeable battery provides six hours of usage to last a full
school day. Recharging for up to two MP-FSMICs is handled by the
MP-FSDS2 docking station*.
DESCRIPTION
MP-FSMIC
*Item(s) are sold separately or as part of a MP-FS100_PAK or MP-FS200_PAK system package.
*Item(s) are sold separately or as part of a MP-FS100_PAK or MP-FS200_PAK system package.
.
Regulatory Compliance
Federal Communications Commission (FCC) Compliance Statement
Industry Canada (IC) Compliance Statement
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
As of the date of manufacture, the MP-FS-RX1 and MP-FS-RX2 have been tested and found to comply with
specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions:
(1) This device may not cause harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Crestron, the Crestron logo, and FreeSpeech are trademarks or registered trademarks of Crestron
Electronics, Inc. in the United States and other countries. Other trademarks, registered trademarks, and trade
names may be used in this document to refer to either the entities claiming the marks and names or their
products. Crestron disclaims any proprietary interest in the marks and names of others.
©2011 Crestron Electronics, Inc.
CONNECTORS,
CONTROLS &
INDICATORS
1 Status (1) Dual-color green/red LED. Blink patterns show
operational status and battery/charging condition1
2 IR Beacon (2) Infrared LEDS, transmit operation data to
MP-FSIR IR Beacon Sensor(s)2
3 ON/MUTE (1) Rocker button, turns wireless mic on and off,
and mutes mic audio
4 VOL (1) Rocker button, adjusts mic volume when mic is
unmuted, adjusts program (line) volume when mic
is muted
5 ALERT (1) Push button, triggers alert out relay and/or
alert tone
6 Service Port Used for firmware upgrade. Only for use by installer
7 Charger Contacts Connect to contacts in Docking Station/Charger2
DESCRIPTION
#
Connectors, Controls & Indicators
MP-FSMIC-B-T-1 Overall Dimensions
0.95 in
(24 mm)
2.10 in
(54 mm)
1.00 in
(26 mm)
1
3
2
4 2 5
76
ALERT
ON MUTE + VOL -
Return and Warranty Policies
Merchandise Returns / Repair Service
1. No merchandise may be returned for credit, exchange or service without
prior authorization from CRESTRON. To obtain warranty service for
CRESTRON products, contact an authorized CRESTRON dealer. Only
authorized CRESTRON dealers may contact the factory and request an
RMA (Return Merchandise Authorization) number. Enclose a note
specifying the nature of the problem, name and phone number of contact
person, RMA number and return address.
2. Products may be returned for credit, exchange or service with a
CRESTRON Return Merchandise Authorization (RMA) number. Authorized
returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive,
Rockleigh, N.J. or its authorized subsidiaries, with RMA number clearly
marked on the outside of all cartons. Shipments arriving freight collect or
without an RMA number shall be subject to refusal. CRESTRON reserves
the right in its sole and absolute discretion to charge a 15% restocking fee
plus shipping costs on any products returned with an RMA.
3. Return freight charges following repair of items under warranty shall be
paid by CRESTRON, shipping by standard ground carrier. In the event
repairs are found to be non-warranty, return freight costs shall be paid by
the purchaser.
CRESTRON Limited Warranty
CRESTRON ELECTRONICS, Inc. warrants its products to be free from
manufacturing defects in materials and workmanship under normal use for a
period of three (3) years from the date of purchase from CRESTRON, with the
following exceptions: disk drives and any other moving or rotating mechanical
parts, pan/tilt heads and power supplies are covered for a period of one (1)
year; touch screen display and overlay components are covered for 90 days;
batteries and incandescent lamps are not covered.
This warranty extends to products purchased directly from CRESTRON or an
authorized CRESTRON dealer. Purchasers should inquire of the dealer
regarding the nature and extent of the dealer's warranty, if any.
CRESTRON shall not be liable to honor the terms of this warranty if the product
has been used in any application other than that for which it was intended or if
it has been subjected to misuse, accidental damage, modification or improper
installation procedures. Furthermore, this warranty does not cover any product
that has had the serial number altered, defaced or removed.
This warranty shall be the sole and exclusive remedy to the original purchaser.
In no event shall CRESTRON be liable for incidental or consequential damages
of any kind (property or economic damages inclusive) arising from the sale or
use of this equipment. CRESTRON is not liable for any claim made by a third
party or made by the purchaser for a third party.
CRESTRON shall, at its option, repair or replace any product found defective,
without charge for parts or labor. Repaired or replaced equipment and parts
supplied under this warranty shall be covered only by the unexpired portion of
the warranty.
Except as expressly set forth in this warranty, CRESTRON makes no other
warranties, expressed or implied, nor authorizes any other party to offer any
warranty, including any implied warranties of merchantability or fitness for a
particular purpose. Any implied warranties that may be imposed by law are
limited to the terms of this limited warranty. This warranty statement
supersedes all previous warranties.
1. Refer to the Microphone LED Blink Codes chart in the next column.
2. Item sold separately or as part of a MP-FS100_PAK or MP-FS200_PAK system package.
INSTALLATION
Installation of the MP-FSMIC consists of the following:
1. Connect the power pack supplied with the MP-FSDS2 Dual
Docking Station/Charger to line power and then to the docking
station. The green LED on the docking station indicates power is
applied.
2. Place the mic in the docking station, and allow it to charge for at
least two hours. When the battery is fully charged, the mic's
Status LED blinks green.*
3. Use the included magnetic clip for lapel or lanyard attachment, or
place the mic in a tabletop stand. During operation, the mic
should be positioned approximately four inches (100 mm) from
the speaker's mouth.
Microphone LED Blink Codes**
Charge Complete G G G G G G G G G G
Charge in Progress R R R R R
On But Not Paired G G G G G G G G G G G G G G G G G
Muted GGG GGG GGG GGG GGG
Paired G G G G G
Missing Beacon While Paired R R R R R
Low Battery RG RG RG RG RG
Low Battery & Muted RGGG RGGG RGGG RGGG RGGG
Low Battery & Missiing Beacon RR RR RR RR RR
Low Battery & Not Paired GRGRGRGRGRGRGRGRGRGRGRGRG
Shutting Off RRRRRRRRRRRRRRRRRRRRRRRRRR
**In the table, G=green; R=red
*Refer to the Microphone LED Blink Codes chart in the next column.