Criticare Systems orporated CSI8600 Telemetry Device User Manual

Download:
Mirror Download [FCC.gov]
Document ID	582082
Application ID	+FHiCH7nHJRF+oWq9Nbq7Q==
Document Description	Manual Appendix G Update
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.53kB (44080 bits)
Date Submitted	2005-09-15 00:00:00
Date Available	2005-09-14 00:00:00
Creation Date	1999-06-08 08:36:55
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2005-09-13 10:25:33
Document Title	untitled
Document Creator	FrameMaker 7.0

Appendix G: Wireless
Communication
Wireless Network
Communication Interface
The Veris 8600 telemetry technology allows for RF communication up
to 10 meters in the Faraday cage utilizing 2.4 gigahertz RF
communication. The main monitor and remote display support a
wireless network communication interface according to the 802.11b
standard.
Operation
WARNING !
• Do not take the remote display into the MR Scanner room. The
remote display contains ferromagnetic material and can be
strongly attracted to the magnet causing a safety hazard.
CAUTION !
• If using an external display or any serial connections with the
remote display, special cables with ferrites must be used. See
“Accessories” in Appendix D for the correct cables to use with
these applications.
pn 3013528: Serial cable with ferrites for the remote display
pn 3013529: Video cable with ferrites for the remote display
The remote display is an option to the Veris Cardiac and Anesthesia
configurations.The remote display is standard on the Veris BasePlus
configuration. The remote display looks similar to the main monitor
that is in the MR room. The remote display must be in the control
room and communicate to the main monitor via a wireless or hardwire
serial connection. The remote display offers a way to control the Veris
main monitor from the control room without going into the MR room.
The remote display and main monitor are sychronized; what displays
on the main monitor displays on the remote display at the same time.
For example, if the user changes an alarm setting, both units display
the ALARMS menu and the change as it takes place.
When the remote display is turned on, it displays the message Please
Wait Until Synchronization until it synchronizes with the main monitor.
The main monitor sends its configuration, trend, and current screen
configuration data to the remote display. This causes the main
monitor and the remote display to be in the same state with the same
data.
NOTE: The remote display and main monitor cannot synchronize if
they are at different software revisions. If the main monitor and the
remote display cannot syncronize because the software revision is
different, then the remote display displays the message Remote and
Main have incompatible Software.
G-1
MEDRAD Veris 8600
After the main monitor and the remote display synchronize, the
remote display mirrors what the main monitor is doing. The main
monitor is the master. An icon displays in the heart rate (HR)
parameter box, on both the remote display and the main monitor, to
show that the main monitor and the remote display are
communicating. (For more information on the heart rate parameter
box, go to “ECG BOX” on page 2-9.)
If communications are lost, the remote display displays the message
Please Wait Until Synchronization and the units cycle through the
synchronization process again after communications are restored.
The communication icon on the main monitor (in the heart rate
parameter box) does not display until communication is restored.
The remote display contains the internal printer. For more information
on printing, see “Printing and Data Ports” in Section 12.
G-2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 2
Page Mode                       : UseOutlines
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:1504290f-4423-48a5-ae25-1edfb7a533a2
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : FrameMaker 7.0
Modify Date                     : 2005:09:13 10:25:33-05:00
Create Date                     : 1999:06:08 08:36:55Z
Metadata Date                   : 2005:09:13 10:25:33-05:00
Document ID                     : uuid:8deb4db8-2145-48eb-bac2-afcdfb0fc81c
Instance ID                     : uuid:57d709a6-d81c-45be-8be0-17c0a48a251e
Format                          : application/pdf
Title                           : untitled
Tagged PDF                      : Yes
Creator                         : FrameMaker 7.0

EXIF Metadata provided by EXIF.tools