Crosley Radio Composer Cd Recorder Cr247 Users Manual 910 263100 002.FH10

CR247 to the manual d9473e25-889c-4038-8217-fbe02ed17f10

: Crosley-Radio Crosley-Radio-Composer-Cd-Recorder-Cr247-Users-Manual-531753 crosley-radio-composer-cd-recorder-cr247-users-manual-531753 crosley-radio pdf

Open the PDF directly: View PDF .
Page Count: 8

22-9-07

Composer CD Recorder

CR247

910-263100-002

WARRANTY

Crosley Radio Products are warranted against defects in material and

workmanship for a period of 90 days beginning from the date of sale to the

original purchaser.

Should the unit fail under normal usage during the 90 day warranty period, a

request for RETURN AUTHORIZATION (R.A.) must be made by the original

customer before returning the unit. Call Crosley Radio customer service for

Return Authorization at (502) 583-4246 from 9 AM to 5 PM (EST) Monday to

Friday.

Upon receiving the RETURN AUTHORIZATION number from the Customer

Service Department, properly pack your unit in its original packaging. Include

any adapters, parts, & accessories which were originally provided with the

product, along with a check or money order for $19.95 made out to Crosley

Radio to cover the handling and return postage. Display the R.A. # on the

outside of the carton and ship PREPAID via standard UPS or its equivalent.

ATTN: RETURNS DEP'T

2001 PRODUCTION DRIVE

BAY 2 & 3

LOUISVILLE, KY 40299

CROSLEY RADIO assumes no responsibility for units sent without prior Return Authorization.

The purchasers bill of sale is the only proof of warranty entitlement and must accompany the unit.

The warranty does not cover damage due to acts of nature, accident, misuse, abuse, negligence, commercial

use or modification of, or to any part of the product. This warranty does not cover damage due to improper

operation or maintenance, connection to improper voltage supply, or attempted repair by anyone other than

a facility authorized by Crosley Radio to service the product. This warranty does not cover products sold

AS IS or consumables (such as fuses or batteries). This warranty is valid only in the United States.

This warranty gives the purchaser specified legal rights in addition to any rights which may vary from state

to state.

In accordance with the "Moss-Magnuson Warranty Act" of July 10, 1975, this is termed a "limited warranty"

which in no way compromises Crosley Radio high standards of Quality and Workmanship.

Instruction Manual

14

IMPORTANT SAFETY INSTRUCTION

PLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT SAFEGUARDS

THAT ARE APPLICABLE TO YOUR EQUIPMENT

1. Read Instructions - All the safety and operating instructions should be read before the product is operated.

2. Retain instructions - The safety and operating instructions should be retained for future reference.

3. Heed Warnings - All warnings on the product and in the operating Instructions should be adhered to.

4. Follow Instructions - All operating and use instructions should be followed.

5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use

a damp cloth for cleaning.

6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.

7. Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub; in a wet basement; or near a swimming pool; and the like.

8. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven

surfaces may cause the product and cart combination to overturn.

9. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable

operation of the product and to protect it from overheating, and these openings must not be blocked

or covered, The openings should never be blocked by placing the product on a bed, sofa, rug, or

other similar surface. This product should not be placed in a built - in installation such as a bookcase

or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.

10. Power Sources - This product should be operated only from the type of power source indicated on the marking label,

if you are not sure of the type of power supply to your home. Consult your product dealer or local power company. For

products intended to operate from battery power, or other sources, refer to the operating instructions.

11. Grounding or Polarization - This product may be equipped with a polarized alternating-current line plug (a plug having

one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet try reversing the plug, If the plug should still fail to fit, contact your

electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12. Power - Cord Protection - Power - supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them, paying particular attention to

cords at plugs, convenience receptacles, and the point where they exit from the product.

13. Lightning - For added protection for this product during a lightning storm, or when it is left

unattended and unused for long periods of time, unplug it from the wall outlet and disconnect

the antenna or cable system. This will prevent damage to the product due to lightning and power - line surges.

14. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

15. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result

in a risk of fire or electric shock.

16. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch

dangerous voltage points or short - out parts that could result in a fire or electric shock. Never spill liquid of any kind

on the product.

17. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified service personnel.

18. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel

under the following conditions;

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the product.

c. If the product has been exposed to rain or water.

d. If the product does not operate normally by following the operating instructions. Adjust only those controls that

are covered by the operating instructions as an improper adjustment of other controls may result in damage and

will often require extensive work by a qualified technician to restore the product to its normal operation.

e. If the product has been dropped or damaged in any way.

f. When the product exhibits a distinct change in performance - this indicates a need for service.

19. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement

parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions

may result in fire, electric shock, or other hazards.

20. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety

checks to determine that the product is in proper operating condition.

21. Wall or ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

22. Heat - The product should be situated away from heat sources such as radiators. Heat registers, stoves, or other

products (including amplifiers) that produce heat.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could

void the users authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful intereference to radio or

television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct

the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio TV technician for help.

AC

Polarized Plug

Troubleshooting

There is no Power

1Make sure the radio is plugged in correctly.

2Check to see that the power button is pushed

in.

3Check to make sure the unit is not in Standby

mode by pressing the Standby button.

There is no Sound

1Check the volume level by turning the volume

knob.

Turntable will not work

1Make sure the unit is set to Phono mode by

pressing the Function button.

2Check the cassette player to make sure a

cassette is not playing.

3Make sure the protective needle cover is

removed.

4Make sure the chrome Turntable Suspension

Screw is screwed all the way down.

CD does not play

1Check to make sure CD is inserted correctly

(label side facing up).

2Check that the surface of the CD is clean

3Make sure function switch is set to CD.

4Make sure the CD is not blank.

General

13

The exclamation point

within an equilateral

triangle is intended to

alert user to the

presence of important

operating and

maintenance (servicing)

instruction in the

literature accompanying

the appliance.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

The lighting flash with

arrowhead symbol, within

an equilateral triangle, is

intended to alert user to

the presence of uninsulated

"dangerous voltage" within

the product's enclosure

that may be of sufficient

magnitude to constitute

risk of electric shock

to persons.

CAUTION: TO REDUCE

THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE

COVER (OR BACK). NO

USER - SERVICEABLE

PARTS INSIDE. REFER

SERVICING TO QUALIFIED

SERVICE PERSONNEL.

Specification

Frequency Range : AM 525 - 1710 KHz

: FM 87.5 - 108.5 MHz

Power Supply : AC 120V ~ 60Hz

Power Consumption : 65W

Speed : 33 1/3, 45, 78 RPM

Speaker : 5 8ohm 10W x 2

Replacement Needle : NP3

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER.

PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

*DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

Audio / Connections

Audio Connections

Aux Input

Using the Aux Input allows you to hook up additional

external audio components and listen to them through

your unit. Any component with an audio output such

as a Tuner, can be connected by using the correct

cables (not included). This unit uses standard RCA

cables. Simply plug the red and white connectors

on one end of the cable to the red and white Aux In

jacks on the back of your unit. The other end of the

cable will plug into the Audio Output jack on the

external component. For more information on hooking

up the external component, see the owners manual

for that component.

Audio Output

Using the Audio Output will allow you to run the

audio from your unit into a home stereo, television

or other stereo source. To make this connection,

you will need standard RCA cables. Plug the red

and white connectors on one end of the cable into

the red and white Audio Output jacks on the back

of the unit. The other end of the cable will plug into

the Aux Input jacks of your selected component. For

more information on hooking up to the external

component, see the owners manual for that

component.

NOTE: You can still listen to your unit when using the Audio

Output feature

Line In Jack

The Line In Jack is located on the front of your unit.

This jack uses a 3.5 mm mini pin cable for connection.

This connection is especially useful in hooking up

smaller audio components like MP3 players. To

make this connection, you will need a 3.5mm audio

cable (not included). Hook one end of the cable into

the Line In Jack on the front of your unit. The other

end will plug into the Audio Output or headphone

jack on the selected component. For more information

on hooking up the external component, see the

owners manual for that component.

Audio Output

Aux Input

AUX IN

R

L

AUDIO OUT

L R

AUX IN

L

(WHITE JACK)

FM

ANT.

AM

ANT.

ANOTHER

AUDIO COMPONENT

L

R

AUDIO OUT

AUX IN

R

(RED JACK)

AUX IN

R

L

AUDIO OUT

L R

L R

AUDIO IN

FM

ANT.

AM

ANT.

AUDIO OUTPUT

R

(RED JACK)

AUDIO OUTPUT

L

(WHITE JACK)

12

Getting Started

Unpacking................................. 4

Power Source........................... 4

Control Locators....................... 5-6

Basic Operation

General..................................... 7

Radio Operation....................... 7

Turntable Operation.................. 8

Cassette Operation.................. 8

CD Operation

Playing a CD............................... 9

Programmed Playback................ 9

Playing MP3 CDs...................... 10

Recording records to CD........... 11

Recording cassettes to CD........ 11

Erasing CD-RW CDs................. 12

Audio / Connections

Audio.......................................... 13

General

Troubleshooting Guide................ 14

Warranty....................................... 15

About This Manual

Thank you for purchasing the Crosley Composer

CD Recorder (CR247). Before operating this unit,

please read this manual thoroughly and retain it for

future reference.

Instructions in this manual describe the control

functions of the CR247.

Included in the package:

Welcome Table of Contents

Composer CD Recorder

Remote Control

FM antenna

AM loop antenna

45 RPM adaptor

You can divide your recording into separate tracks

if you wish. By doing this, each song will have its

own sequential track number. To do this, you must

use the Split Track button (4/56).

While Recording your record or cassette, listen for

the end of each song. There will usually be a brief

silence between songs. Once you are at the end of

the song, press the Split Track button. The recording

will then go to the next track number by increments

of one. Once the recording is finished, you can press

the (11/64) or the (9/52) buttons to go to

the beginning of each song.

If using a CD-RW, you can erase the whole CD and

rerecord it. Erase procedures are only possible with

CD-RW discs. It is not possible to erase or rerecord

a CD-R CD. To erase a CD-RW, follow the steps

below.

1Press the FUNCTION button (17/68) to set the

unit to CD mode.

2Load a recorded CD-RW into the unit.

3Press the STOP button (13/53) to stop playback.

4Press the ERASE button (3/57). ERASE will

appear on the display ,Press PLAY Button(16/63)

to confirm and the erasing process will begin.

When finished, the display will first read F Done

and then BLANK.

5The CD is now ready to record.

NOTE: Once a CD is erased, the contents that were

on the CD cannot be retrieved.

CD Operation

Manual Track Division Erasing a CD-RW

11 4

Getting Started

Unpacking

1Remove packing materials from unit.

NOTE: Save all packing materials.

2Remove plastic bag covering radio.

3Remove plastic safety cover from A/C plug.

4Remove tie from A/C cord and untie antenna

wire on back of radio.

5Open lid and remove styrofoam shipping

material from turntable.

6Remove black tie-wrap from under the tone

arm.

7Remove tape and white protective needle

coverby gently pulling them towards the

front of the unit.

8Turn the TURNTABLE SUSPENSION SCREW

(31) clockwise until it is all the way down.

Do not force or over tighten it. This allows the

turntable to float on its shock absorbers.

9Release tone arm hold down clip by gently

pushing to the right. This will unlock tone arm

from its arm rest. Re-lock the hold down clip

when moving the unit to another location.

Power Source

Headphones Jack Operation

1Connect headphones to the Headphone Jack (15)

2Adjust volume to the desired listening level.

NOTE: When using headphones, the sound to the unit

speakers will be cut off.

CD Recording Operation

Preparation

This unit is designed to record CD-R and CD-RW

discs bearing the identification logo Compact Disc

Recordable or CD-Rewritable. If CDs do not

conform to this standard, they may not record

properly.

1Load a compatible blank CD-R or CD-RW into

the unit.

2Press the FUNCTION button (17/68) to set the

unit to Phono mode.

3Set the SPEED CONTROL SWITCH (34) to

the correct speed (33 1/3, 45 or 78 rpm) for

the selected record.

4Use the CUE LEVER (32) to raise the tone

arm off its rest. Move the tone arm over the

record and use the cue lever to lower it to the

point you want the recording to start.

5Press the CD RECORD button (7/55). Record

will flash on the LCD. The CD will begin

recording.

6Once the first side of the record is finished,

press the STOP (13/53) button. The display

will read "CLOSE TK" for one second and

then change to "PHONO".

7Turn the record over and repeat steps 4-6 to

record the other side.

8 After recording is completed, press the STOP

(13/53) button. The display will read "CLOSE

TK" for one second and then change to

"PHONO".

9 Once you have finished the recording, press

the FINALIZE (2/59) button. The display will

read "Finalize".

10 Once the CD has been finalized, the unit will

return to Phono mode and the display will show

"PHONO". The CD is now ready for use.

NOTE: If the CD is not finalized, it will not play in any

other CD player. Not all CD players are

compatible with CD-R and CD-RWs. Check

the owners manual for other CD players for

compatibility.

1Load a compatible blank CD-R or CD-RW into

the unit.

2Press the FUNCTION button (17/68) to set the

unit to Phono mode.

3Load a pre-recorded cassette tape into the

cassette player. Press to PLAY button(28) to

get the cassette to the point in which you want

to start the recording.

4Once the cassette is ready and playing, press

the CD RECORD button (7/55). "Record" will

flash on the LCD. The CD will begin recording.

5Once the first side of the cassette is finished,

press the STOP (13/53) button. The display will

read "CLOSE TK" for one second and then

change to "PHONO".

6Eject the cassette tape and flip it over to the

other side.

7Repeat steps 4 and 5 to record the other side

of the cassette.

8After recording is completed, press the STOP

(13/53) button. The display will read "CLOSE

TK" for one second and then change to

"PHONO".

9Once you have finished the recording, press

the FINALIZE (2/59) button. The display will

read "Finalize".

10 Once the CD has been finalized, the unit will

return to Phono mode and the display will show

"PHONO". The CD is now ready for use.

NOTE:If the CD is not finalized, it will not play in any

other CD player. Not all CD players are

compatible with CD-R and CD-RW's. Check

the owner's manual for other CD players for

compatibility.

CD Operation

Recording Records to CD

Recording Cassettes to CD

The sound from all speakers is cut off.

Headphone Jack(15)

AC

Polarized Plug

1

Unwind the AC POWER CORD (41) at the back

of the unit and connect it to a power outlet.

2Plug A/C cord into appropriate outlet.

3This product is equipped with a polarized

alternating current line plug (a plug having one

blade wider than the other). This plug will fit into

the power outlet only one way. This is a safety

feature, If you are unable to insert the plug fully

into the outlet, try reversing the plug. If the plug

should still fail to fit, contact you electrician to

replace your obsolete outlet. Do not defeat the

purpose of the polarized plug.

NOTE: Headphones not included with unit.

510

Playing MP3 CDs

This unit will play CDs recorded in MP3 format. All

the controls and functions work the same as a regular

CD. Listed below are features and instructions that

are unique to playing a MP3 CD.

MP3 CDs normally contain many files. By using the

search features described below, you can easily and

quickly locate albums or songs. Follow the steps

below to use the search feature.

Search by File Name

If your MP3 CD is separated into folders, follow the

steps below to access the folders.

1While the CD is stopped, press the PRESET+

(10/54) or the PRESET - (8/65)buttons to

advance forward or backwards through the

folders on your disc.

2Once the desired folder is reached, use the

PRESET+ (10/54) and PRESET - (8/65) buttons

to select the desired track.

3Press the PLAY (16/63) to begin playback of the

selected track.

Search by File Name

1In stop or play mode, press the FIND (51)to start

the alphabetic and numerical search.

2

Press the PRESET+ (

10/54

) or PRESET - (

8/65

)

button repeatedly to select the corresponding

letter or number of the track you are searching

for.

3When the desired track is found, press the

PLAY (16/63) button to start playing the selected

track.

4To exit the search mode press the FIND Button

(51) repeatedly until the " " icon disappears

from the LCD display.

Search by Folder / Album Title

1While the CD is stopped, press the FIND (51)

button twice to start to browse the album. The

search icon, ALBUM 001 and its name will be

shown on the display.

2Press the

PRESET+ (

10/54

)

or

PRESET - (

8/65

)

button repeatedly to select the desired album.

3When the desired album is shown on the display,

press the PLAY(16/63) to start play all the tracks

from the beginning of the selected Folder/Album.

NOTE: The search feature will only work if the MP3 CD has

information such as Folder, Artist and Song titles

already stored on the CD. This information is added

at the time the CD is created and cannot be added

afterwards.

NOTE: You cannot record MP3 CDs with this unit. They

must be created with a computer or other device.

If the MP3 CD has track information stored on it,

such as artist and title, the LCD will display that

information during playback of the CD.

1While the MP3 disc is playing, press the BAND

(19/58) button.

2The CD information will start to scroll across the

LCD.

3Press the BAND (19/58) button again to cancel

the information.

NOTE: If the CD was recorded without any track information,

UNKNOWN will be displayed when the BAND

button is pressed.

CD Operation

Search Play

Folder/Album Playback

CD Information

28

27 25

26

29

1

30 31 32

34

35

36

33

2

2122

3

4

5 7 9 11 13 14 15

16

17

18

19

2024 23

6

8 10 12

Control Locators

Unit Controls

1Speakers

2Finalize Button

3Erase Button

4Split Track Button

5Line In Jack

6Open/Close Button (CD Door)

7Record Button

8 Preset - Button

9Tuning Down Button

10 Preset + Button

11 Tuning Up Button

12 Program Button

13 Stop Button

14 CD Drawer

15 Headphone Jack

16 Play/Pause

17 Function Button

18 EQ Button

19 Band Button(AM/FM)

20 Power Button

21 LCD Display

22 Sensor

23 Stand By Indicator

24 Volume Knob

25 Stop/Eject

26 Fast Forward

27 Rewind

28 Play

29 Cassette Door

30 Hold Down Clip

31 Turntable Suspension Screw

32 Cue Lever

33 Tone Arm Rest

34 Speed Control Switch

35 Tone Arm

36 Turntable

69

Control Locators

Unit Controls

Remote Controls

37 Aux In Jack

38 Audio Output Jack

39 AM Antenna Jack

40 FM Antenna Socket

41 AC Power Cord

42 AM Loop Antenna

43 FM Antenna Wire

44 Adapter For 45 rpm Records

37 38 39 40

AUX IN

R

L

AUDIO OUT

L R

FM

ANT.

AM

ANT.

42 43 44

POWER

EJECT

REPEAT

FIND

REC

ERASE

FINALIZE

1

4

7

0

2

5

8

10+

3

6

9

MUTE

BAND

MO/ST

TRACK

SPLIT

VOL -

EQ

PROGRAM

FUNCTION

VOL +

RANDOM

PRESET

+

PRESET

-

45

46

47

48

49

51

53

50

55

57

54

59

58

52

56

61

62

64

63

65

66

67

68

69

70

60

Random Play

Programmed Playback

Repeat Playback

Playing a CD

1While playing a CD, press the RANDOM button

(48) on the remote control. Rand will show on

the LCD display. The unit will randomly select

songs from the CD.

2To cancel Random playback, press the

RANDOM button (48) again.

1Make sure the CD is stopped.

2Press the PROGRAM button (12/47). " 01" will

shown on the display.

3Press the (11/64) or (9/52)buttons to

select a desired track.

4Press the PROGRAM button (12/47) twice to

store the selected track number.

5Repeat above steps 3 and 4 to program

additional tracks into memory.

NOTE: Maximum of 99 tracks can be programmed

into memory.

1Press the FUNCTION button (17/68) to set the

unit to CD mode.

2Press the OPEN/CLOSE button (6) to open

the CD drawer. Insert a CD into the tray with the

label side facing up.

3Press the OPEN/CLOSE button(6) again to

close the CD drawer. The display will show

CD Load for a few seconds and playback will

automatically begin.

4To skip forwards or backwards through the tracks

on a CD, press the (11/64) or (9/52) buttons.

5To fast forward or rewind through a track, press

and hold the (11) or (9) buttons on the

control panel. Release the buttons once you

reach the desired position on the track. To use

the remote to fast forward or rewind, press the

(62) or (50) button one time. Once the

desired position is reached, press the button

again to resume play.

1To repeat a single track, select the desired track

number and press the REPEAT button (49)

once. Press the PLAY button. "Repeat one" will

show on the display and the selected track will

repeat once it is finished.

2To repeat a whole CD, press the REPEAT button

(49) twice. The display will show "Repeat All".

Once the disc is finished, it will start over again

from the beginning.

3To turn off the repeat feature, press the REPEAT

button (49) again. The repeat display will

disappear from the LCD.

CD Operation

41

45 Power/Stand By Button

46 Eject Button

47 Program Button

48 Random Button

49 Repeat Button

50 Tuning Down Button

51 FIND Button

52 Backward Skip

53 Stop Button

54 Preset + Button

55 Record Button

56 Split Track Button

57 Erase Button

58 Band Button(AM/FM)

59 Finalize Button

60 0-9, 10+ Button

61 Mute Button

62 Tuning Up Button

63 Play/CD Pause Button

64 Forward Skip

65 Preset - Button

66 Mono/Stereo Button

67 EQ Button

68 Function Button

69 Volume Down

70 Volume Up

87

Playing a Cassette

Accessory: ADAPTER FOR 45 RPM

To Fast Forward or Rewind

Turntable Operation

1Press the FUNCTION button (17/68) to set the

unit to Phono mode.

2Set the SPEED CONTROL SWITCH (34) to

the correct speed (331/3, 45 or 78 rpm) for the

selected record.

3Use the CUE LEVER (32) to raise the tone arm

off its rest. Move the tone arm over the record

and use the cue lever to lower it to the point

you want the record to start.

4At the end of the record, the tone arm will return

to its rest.

NOTE:The turntable and cassette players both operate

in the same mode. Make sure the cassette

player is in STOP mode when listening to a

record.

To play the 45rpm record, place the ADAPTER (44)

on the spindle.

Basic Operation

1While in Phono mode, press the

STOP/EJECT(25) button on the cassette player

to open the cassette door.

2Insert a prerecorded cassette tape into the

cassette door.

3Press the PLAY button (28) to begin play.

4To stop playback, press the STOP/EJECT (25)

button.

5Press the STOP/EJECT (25) button again to

eject the cassette.

1While playback is stopped, press the FAST

FORWARD (26) or REWIND (27) button to fast

forward or rewind the cassette.

2Once the desired position is reached on the

cassette, press the STOP/EJECT (25) button

to stop the cassette.

3Press the PLAY (28) button to begin play.

NOTE: The cassette player plays the side of the

cassette facing away from the unit. To

play the other side of the cassette, you

must eject the cassette and turn it over.

Antenna

1Make sure the unit is plugged in correctly to an

AC outlet.

2Press the POWER button (20) to turn the power

on.

3Once the power is turned on, press the

FUNCTION button (17/68) to switch between

Tuner/CD/Phono/Aux. When switching between

functions, wait 1 second after pressing the

function button before pressing it again. This

gives the unit time to load the correct information

for the selected function.

4While listening to any of the above functions,

you may change the tone of the music by

pressing the EQ button (18/67). Each press of

the EQ button will toggle between the following

settings:

Basic Operation

Outdoor Antenna Grounding

1Press the FUNCTION button (17/68) to set the

unit to Tuner mode

2Press the BAND button (19/58) to select the

desired tuning band (AM/FM).

3Press the (11) or (9) button to select a

station,To use the remote to select a station, use

the (62) or (50) buttons.

4Adjust the volume to the desired listening level.

1Tune into the station that you want to program

into memory.

2Press the PROGRAM button (12/47), Memory

will flash on the LCD.

3Press the (11/64) or (9/52) buttons to

select the desired memory location.

4Press the Program button again to store the

station into memory.

5Once you have the presets stored, press the

PRESET UP + (10/54) or the PRESET  (8/65)

to select the stored stations.

Antenna: for extennal FM reception, the unit is

provided with a FM ANTENNA WIRE (43), move the

wire until the reception is clear and with no inter-

ferences. For AM reception, the unit is provided with

a directional build-in ferrite antenna. Rotate the set

to find the position in which the best reception is

obtained.

General

If an outside antenna is connected to the receiver,

be sure the antenna system is grounded so as to

provide some protection against voltage surges and

buit-up static charges. Article 610 of the National

Electrical Code, ANSI/NFPA 70, provides information

with regard to proper grounding of the mast and

supporting conductors, location of antenna-discharge

unit, connection to grounding electrodes, and

requirements for the grounding electrode. See figure:

NOTE: Please use outside antenna for better reception.

FM Antenna Wire (43)AM Loop Antenna (42)

GROUND CLAMP

ELECTR C

SERVICE

EQUPMENT

ANTENNA

LEAD IN WIRE

ANTENNA

DISCHARGE UN T

GROUNDING

CONDUCTORS

GROUND CLAMPS

POWER SERVICE GROUND NG

ELECTRODE SYSTEM

Radio Operation

Programming Preset Stations

FLAT CLASSIC

POP

JAZZ ROCK