Crosley Radio Songwriter Cd Burner Cr248 Users Manual 910 252800 003.FH10

CR248 to the manual dc282eb7-1dca-4d56-b13f-2ae6fe386002

: Crosley-Radio Crosley-Radio-Songwriter-Cd-Burner-Cr248-Users-Manual-535896 crosley-radio-songwriter-cd-burner-cr248-users-manual-535896 crosley-radio pdf

Open the PDF directly: View PDF .
Page Count: 8

22-9-06

Songwriter CD Recorder

CR248

910-252800-003

WARRANTY

Crosley Radio Products are warranted against defects in material and

workmanship for a period of 90 days beginning from the date of sale to the

original purchaser.

Should the unit fail under normal usage during the 90 day warranty period, a

request for RETURN AUTHORIZATION (R.A.) must be made by the original

customer before returning the unit. Call Crosley Radio customer service for

Return Authorization at (502) 583-4246 from 9 AM to 5 PM (EST) Monday to

Friday.

Upon receiving the RETURN AUTHORIZATION number from the Customer

Service Department, properly pack your unit in its original packaging. Include

any adapters, parts, & accessories which were originally provided with the

product, along with a check or money order for $19.95 made out to Crosley

Radio to cover the handling and return postage. Display the R.A. # on the

outside of the carton and ship PREPAID via standard UPS or its equivalent.

ATTN: RETURNS DEP'T

2001 PRODUCTION DRIVE

BAY 2 & 3

LOUISVILLE, KY 40299

CROSLEY RADIO assumes no responsibility for units sent without prior Return Authorization.

The purchasers bill of sale is the only proof of warranty entitlement and must accompany the unit.

The warranty does not cover damage due to acts of nature, accident, misuse, abuse, negligence, commercial

use or modification of, or to any part of the product. This warranty does not cover damage due to improper

operation or maintenance, connection to improper voltage supply, or attempted repair by anyone other than

a facility authorized by Crosley Radio to service the product. This warranty does not cover products sold

AS IS or consumables (such as fuses or batteries). This warranty is valid only in the United States.

This warranty gives the purchaser specified legal rights in addition to any rights which may vary from state

to state.

In accordance with the "Moss-Magnuson Warranty Act" of July 10, 1975, this is termed a "limited warranty"

which in no way compromises Crosley Radio high standards of Quality and Workmanship.

Instruction Manual

Playing Video CD

Fast Forward And Fast Rewind

Intro Play

Zooming a Picture

PBC (Playback Control)

13

The Songwriter will play video disks in the follows

formats: VCD, Mpeg and Jpeg. To play these video

files though your unit, make sure to have the video

cable connected correctly to your TV. If the disc

contains audio, the Audio Output cables will need

to be hooked up as well. Refer to the Audio/Video

Connections section of this manual for information

on making these connections. To play a video disc,

follow the instructions below.

1Press the FUNCTION button (28/58) to set the

unit to CD mode.

2Press the PAL/NTSC button to set the units

output to match the tuner in your television.

NOTE: Most all TVs in the U.S. use NTSC

tuners.

3Press the OPEN/CLOSE button (19/48) to open

the CD drawer. Insert a VCD or video disc with

Jpeg or Mpeg files into the CD tray with the

label side of the disc facing up.

4Press the OPEN/CLOSE button (19/48) again

to close the CD drawer. The display will show

Load for a few seconds and playback will

automatically begin.

NOTE: Make sure your TV is set to receive the

input from the video cable.

Press FAST FORWARD button(11/68) or FAST

REWIND button(9/53) during playback:

Each press of the FAST FORWARD button (11/68)

or FAST REWIND button (9/53) will forward or rewind

the speed of play in increments of 2, 4, 6, 8 or 16Xs

the normal playing speed. To return to normal

playback speed, press the PLAY button (15/63).

NOTE: No sound is reproduced while fast forwarding

or rewinding the CD.

1Press the INTRO button (51) once during VCD

playback. The first few seconds of each chapter

of the disc will play.

2To cancel Intro Play, press the INTRO button

(51) again.

Video CD equipped with the PBC(Version 2.0)

function.(PBC is the abbreviation of Playback Control)

You can enjoy two playback variations depending

on the type of disc.

VIDEO CD not equipped with PBC function on

(Version1.1)

Sound and movies can be played on this unit in the

same way as and audio CD.

In addition to operation of the Video CD not equipped

with PBC function, you can enjoy playback with

interactive software and with search function by

using the menu displayed on the TV screen(Menu

Playback).

Using the Zoom feature allows you to zoom in on

the picture. You can use the Zoom feature while the

disc is playing normally, in slow mode or paused.

1Press the ZOOM button (67) once to increase

the magnification level. Each press after that

increased the level of magnification. Once the

max size has been reached, the next push of

the button will return the picture size back to

normal.

2Press the CLEAR button (65) to decrease the

amount of zoom.

VCD Operation

The exclamation point

within an equilateral

triangle is intended to

alert user to the

presence of important

operating and

maintenance (servicing)

instruction in the

literature accompanying

the appliance.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

The lighting flash with

arrowhead symbol, within

an equilateral triangle, is

intended to alert user to

the presence of uninsulated

"dangerous voltage" within

the product's enclosure

that may be of sufficient

magnitude to constitute

risk of electric shock

to persons.

CAUTION: TO REDUCE

THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE

COVER (OR BACK). NO

USER - SERVICEABLE

PARTS INSIDE. REFER

SERVICING TO QUALIFIED

SERVICE PERSONNEL.

Specification

Frequency Range : AM 525 - 1710 KHz

: FM 87.5 - 108 MHz

Power Supply : AC 120V ~ 60Hz

Power Consumption : 65W

Speed : 33 1/3, 45, 78 RPM

Speaker : 5 8ohm 5W x 2

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER.

PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

*DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

Erasing a CD-RW

Manual Track Division

11 4

CD Recording Operation Getting Started

Unpacking

1Remove packing materials from unit.

NOTE: Save all packing materials.

2Remove plastic bag covering radio.

3Remove plastic safety cover from A/C plug.

4Remove tie from A/C cord and untie antenna

wire on back of radio.

5Open lid and remove styrofoam shipping

material from turntable.

6Remove black tie-wrap from under the tone

arm.

7Remove white protective needle cover by gently

pulling towards the front of the unit.

8Using your fingers, turn large chrome screw

clockwise until it is all the way down. do not

force it. This allows turntable to float on its shock

absorbers.

9Release tone arm hold down clip by gently

pushing to the right. This will unlock tone arm

from its arm rest. Re-lock the hold down clip

when moving the unit to another location.

Power Source

Headphones Jack Operation

1Connect headphones to the Headphone Jack

(16)

2Adjust volume to the desired listening level.

NOTE: When using headphones, the sound to the unit

speakers will be cut off.

If using a CD-RW, you can erase the whole CD and

rerecord it. Erase procedures are only possible with

CD-RW discs. It is not possible to erase or rerecord

a CD-R CD. To erase a CD-RW, follow the steps

below.

1Press the FUNCTION button (28/58) to set the

unit to CD mode.

2Load a recorded CD-RW into the unit.

3Press the STOP button (13/77) to stop playback.

4Press the ERASE button (10/57). ERASE will

appear on the display and the erasing process

will begin. When finished, the display will first

read F Done and then BLANK.

5The CD is now ready to record.

NOTE: Once a CD is erased, the contents that were

on the CD cannot be retrieved.

You can divide your recording into separate tracks

if you wish. By doing this, each song will have its

own sequential track number. To do this, you must

use the Split Track button (5/70).

While Recording your record or cassette, listen for

the end of each song. There will usually be a brief

silence between songs. Once you are at the end of

the song, press the Split Track button. The recording

will then go to the next track number by increments

of one. Once the recording is finished, you can press

the Preset Up (22/52) or the Preset Down (23/54)

buttons to go to the beginning of each song.

The sound from all speakers is cut off.

Headphone Jack(16)

AC

Polarized Plug

1

Unwind the AC POWER CORD (43) at the back

of the unit and connect it to a power outlet.

2Plug A/C cord into appropriate outlet.

3This product is equipped with a polarized

alternating current line plug (a plug having one

blade wider than the other). This plug will fit into

the power outlet only one way. This is a safety

feature, If you are unable to insert the plug fully

into the outlet, try reversing the plug. If the plug

should still fail to fit, contact you electrician to

replace your obsolete outlet. Do not defeat the

purpose of the polarized plug.

Random Play

Programmed Playback

Repeat Playback

43

38 39 40 41 42

Playing a CD

Search (For Audio CD Only)

1While playing a CD, press the RANDOM button

(75) on the remote control. Rand will show on

the LCD display. The unit will randomly select

songs from the CD.

2To cancel Random playback, press the

RANDOM button (75) again.

1Make sure the CD is stopped.

2Press the PROGRAM button (20/49). " 01" will

shown on the display.

3Press the PRESET UP button (22/52) or

the PRESET DOWN button (23/54) to select

a desired track.

4Press the PROGRAM button (20/49) twice to

store the selected track number.

5Repeat above steps 3 and 4 to program

additional tracks into memory.

NOTE: Maximum of 16 tracks can be programmed

into memory.

1Press the FUNCTION button (28/58) to set the

unit to CD mode.

2Press the OPEN/CLOSE button (19/48) to open

the CD drawer. Insert a CD into the tray with the

label side facing up.

3Press the OPEN/CLOSE button again to close

the CD drawer. The display will show Load for

a few seconds and playback will automatically

begin.

4To advance forwards or backwards through the

tracks, press the PRESET UP (22/54) or

PRESET DOWN (23/52).

5To fast forward or rewind through a particular

song, press the TUNING UP (9/53) or TUNING

DOWN (11/68) buttons. Once you reach the

point of the track you wish to hear, press the

Play button (15/63) to resume playback.

1To repeat a single track, select the desired track

number and press the REPEAT button (21/73)

once. Press the PLAY button. "Repeat one" will

show on the display and the selected track will

repeat once it is finished.

2To repeat a whole CD, press the REPEAT button

(21/73) twice. The display will show "Repeat All".

Once the disc is finished, it will start over again

from the beginning.

3To turn off the repeat feature, press the REPEAT

button (21/73) again. The repeat display will

disappear from the LCD.

1When playing any audio CD, press the FAST

FORWARD button(11/68) or FAST REWIND

button (9/53) or at fast forward or fast backward

direction.

2Normal play will continue when you press the

PLAY button (15/63).

69

CD Operation Control Locators

Unit Controls

38 Aux In Jack

39 Video Output Jack

40 Audio Output Jack

41 AM Antenna Jack

42 FM Antenna Socket

43 AC Power Cord

44 AM Loop Antenna

45 FM Antenna Wire

46 Adapter For 45 rpm Records

Remote Controls

47 Power/Stand By Button

48 Eject Button

49 Program Button

50 Search Button

51 Intro Button

52 Next/Preset Up Button

53 Tuning Down Button

54 Previous/Preset Down Button

55 Finalize Button

56 Record Button

57 Erase Button

58 Function Button

59 Band Button(AM/FM)

60 Audio Button

61 Slow Button

62 PBC Button(Playback Control)

63 Play Button

64 0-9, 10+ Button

65 Clear Button

66 Volume Up

67 Zoom Button

68 Tuning Up Button

69 Volume Down

70 Split Track/CD Pause Button

71 Mono/Stereo Button

72 Mute Button

73 Repeat Button

74 EQ Button

75 Random Button

76 PAL/NTSC Button

77 Stop Button

AUX IN

R

L

VIDEO O/P AUDIO O/P

L R

AUX IN

R

L

VIDEO O/P AUDIO O/P

L R

FM

ANT.

AM

ANT.

FM

ANT.

AM

ANT.

44 45 46

47

48

49

50

51

52

53

54

56

58

60

62

55

57

59

61

63

64

65

66

67

69

70

72

74

76

68

71

73

75

77

1 2 3

4 5 6

7 8 9

0

10+

CLEAR

VOL +

POWER

EJECT

PROG

SEARCH

INTRO

RECORD FINALIZE

FUNCTION

ERASE MUTEMO/ST

AUDIO BAND REPEAT EQ

PBC SLOW RANDOM

PAL/NTSC

SPLIT TRACK/

CD PAUSE

NEXT/PRESET +

PREV/PRESET --

ZOOM

VOL

-

REMARK: Tuning Up button = Fast Forward button

Tuning Down button = Fast Rewind button

(on Audio/Video operation)

Troubleshooting

There is no Power

1Make sure the radio is plugged in correctly.

2Check to see that the power button is

pushed in.

There is no Sound

1Check the volume level by turning the volume

knob.

Turntable will not work

1Make sure the function switch is set to phono.

2Make sure there is no cassette tape in the

cassette compartment..

3Try moving the tone arm to the right until you

hear a click.

4Make sure the protective needle cover is

removed.

CD does not play

1Check to make sure CD is inserted correctly

(label side facing up).

2Check that the surface of the CD is clean

3Make sure function switch is set to CD.

General

14

IMPORTANT SAFETY INSTRUCTION

PLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT SAFEGUARDS

THAT ARE APPLICABLE TO YOUR EQUIPMENT

1. Read Instructions - All the safety and operating instructions should be read before the product is operated.

2. Retain instructions - The safety and operating instructions should be retained for future reference.

3. Heed Warnings - All warnings on the product and in the operating Instructions should be adhered to.

4. Follow Instructions - All operating and use instructions should be followed.

5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use

a damp cloth for cleaning.

6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.

7. Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub; in a wet basement; or near a swimming pool; and the like.

8. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven

surfaces may cause the product and cart combination to overturn.

9. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable

operation of the product and to protect it from overheating, and these openings must not be blocked

or covered, The openings should never be blocked by placing the product on a bed, sofa, rug, or

other similar surface. This product should not be placed in a built - in installation such as a bookcase

or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.

10. Power Sources - This product should be operated only from the type of power source indicated on the marking label,

if you are not sure of the type of power supply to your home. Consult your product dealer or local power company. For

products intended to operate from battery power, or other sources, refer to the operating instructions.

11. Grounding or Polarization - This product may be equipped with a polarized alternating-current line plug (a plug having

one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet try reversing the plug, If the plug should still fail to fit, contact your

electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12. Power - Cord Protection - Power - supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them, paying particular attention to

cords at plugs, convenience receptacles, and the point where they exit from the product.

13. Lightning - For added protection for this product during a lightning storm, or when it is left

unattended and unused for long periods of time, unplug it from the wall outlet and disconnect

the antenna or cable system. This will prevent damage to the product due to lightning and power - line surges.

14. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

15. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result

in a risk of fire or electric shock.

16. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch

dangerous voltage points or short - out parts that could result in a fire or electric shock. Never spill liquid of any kind

on the product.

17. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified service personnel.

18. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel

under the following conditions;

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the product.

c. If the product has been exposed to rain or water.

d. If the product does not operate normally by following the operating instructions. Adjust only those controls that

are covered by the operating instructions as an improper adjustment of other controls may result in damage and

will often require extensive work by a qualified technician to restore the product to its normal operation.

e. If the product has been dropped or damaged in any way.

f. When the product exhibits a distinct change in performance - this indicates a need for service.

19. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement

parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions

may result in fire, electric shock, or other hazards.

20. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety

checks to determine that the product is in proper operating condition.

21. Wall or ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

22. Heat - The product should be situated away from heat sources such as radiators. Heat registers, stoves, or other

products (including amplifiers) that produce heat.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could

void the users authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful intereference to radio or

television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct

the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio TV technician for help.

AC

Polarized Plug

Getting Started

Unpacking................................. 4

Power Source........................... 4

Control Locators....................... 5-6

Basic Operation

General..................................... 7

Radio Operation....................... 7

Turntable Operation.................. 8

Cassette Operation.................. 8

CD Operation

Playing a CD............................... 9

Programmed Playback................ 9

Recording records to CD........... 10

Recording cassettes to CD........ 10

Erasing CD-RW CDs................. 11

Audio / Video Connections

Audio.......................................... 12

Video.......................................... 12

VCD Operation

Playing Video CD........................ 13

General

Troubleshooting Guide................ 14

Warranty....................................... 15

12

About This Manual

Thank you for purchasing the Crosley Songwriter

CD Recorder (CR248). Before operating this unit,

please read this manual thoroughly and retain it for

future reference.

Instructions in this manual describe the control

functions of the CR248.

Included in the package:

Welcome Table of Contents Audio / Video Connections

Audio Connections

Songwriter CD Recorder

Remote Control

FM antenna

AM loop antenna

45 RPM adaptor

Turntable pad

Aux Input

Using the Aux Input allows you to hook up additional

external audio components and listen to them through

your unit. Any component with an audio output such

as a Tuner, AV receiver or VCR, can be connected

by using the correct cables (not included). This unit

uses standard RCA cables. Simply plug the red and

white connectors on one end of the cable to the red

and white Aux In jacks on the back of your unit. The

other end of the cable will plug into the Audio Output

jack on the external component. For more information

on hooking up the external component, see the

owners manual for that component.

Audio Output

Using the Audio Output will allow you to run the

audio from your unit into a home stereo, television

or other stereo source. To make this connection,

you will need standard RCA cables. Plug the red

and white connectors on one end of the cable into

the red and white Audio O/P jacks on the back of

the unit. The other end of the cable will plug into the

Aux Input jacks of your selected component. For

more information on hooking up to the external

component, see the owners manual for that

component.

NOTE: You can still listen to your unit when using the Audio

Output feature

Line In Jack

The Line In Jack is located on the front of you unit.

This jack uses a 3.5 mm mini pin cable for connection.

This connection is especially useful in hooking up

smaller audio components like MP3 players. To

make this connection, you will need a 3.5mm audio

cable (not included). Hook one end of the cable into

the Line In Jack on the front of your unit. The other

end will plug into the Audio Output or headphone

jack on the selected component. For more information

on hooking up the external component, see the

owners manual for that component.

Video Connection

Your Songwriter will also play certain types of Video

Disks. This is covered on the following page. You

will need a RCA video cable (not included) to make

the connection. To make the video connection to

your television, connect one end of the video cable

to the yellow Video O/P jack on the back of your

unit. Connect the other end to the Video input jack

on your television.

If your television does not have the required Video

Input, you will need an RF Modulator (Radio

Frequency Modulator), which connects your TV

Antenna or cable line and serves as Video Input.

An RF Modulator can be purchased at almost any

consumer electronics retailer. If you are connecting

the video to either a television or a VCR video input

jack, you must specify the source the TV or VCR is

to display. Your TV or VCR user guide can tell you

how to display the video signal from the Video in.

jack.

NOTE: Some projection TV sets do not display the standard

blue background used on most VCD/ Jpeg/ Mpeg files disc

properly. If the background color is inconsistent or flashing,

please try connecting to a standard tube television.

Audio Output

Aux Input

Video Output

AUX IN

R

L

VIDEO O/P AUDIO O/P

L R

VIDEO OUTPUT

(YELLOW JACK)

VIDEO IN

VIDEO INPUT

(TV or VCR)

(YELLOW JACK)

FM

ANT.

AM

ANT.

AUX IN

R

L

VIDEO O/P AUDIO O/P

L R

AUX IN

L

(WHITE JACK)

FM

ANT.

AM

ANT.

ANOTHER

AUDIO COMPONENT

L

R

AUDIO OUT

AUX IN

R

(RED JACK)

AUX IN

R

L

VIDEO O/P AUDIO O/P

L R

L R

AUDIO IN

FM

ANT.

AM

ANT.

AUDIO OUTPUT

R

(RED JACK)

AUDIO OUTPUT

L

(WHITE JACK)

Recording Cassettes to CD

Recordable

ReWritable

FUNCTION EQ

MONO/STEREO BAND

MUTE

LINE IN EARPHONE

SPLIT TRACK/

CD PAUSE

REPEAT PROGRAM

STAND BY OPEN/CLOSE

POWER

ERASE

VOLUME

DOWN UP

FINALIZE

CD RECORDER

PM MHz

KHz

AM

FM

MW

SENSOR

1

2

3

4

5

6

7

8 9 10 11 12 13 14 15

22232728

29 30

2526 24

21

20

19

18

17

16

510

CD Recording Operation

Recording Records to CD

Control Locators

Unit Controls

1Speakers

2Band Button(AM/FM)

3Mono/Stereo Button

4Mute Button

5Split Track/CD Pause Button

6Record Button

7Line In Jack

8 CD Drawer

9Tuning Down Button

10 Erase Button

11 Tuning Up Button

12 Volume Knob

13 Stop Button

14 Finalize Button

15 Play Button

16 Headphone Jack

17 Power Button

18 Stand By Button

19 Open/Close Button (CD Door)

20 Program Button

21 Repeat Button

22 Preset Up Button

23 Preset Down Button

24 Stand By Indicator

25 LCD Display

26 Sensor

27 EQ Button

28 Function Button

(CD/PHONO/RADIO/AUX)

29 Cassette Eject/Fast Forward

30 Cassette Door

31 Hold Down Clip

32 Turntable Suspension Screw

33 Cue Lever

34 Tone Arm Rest

35 Speed Control Switch

36 Tone Arm

37 Turntable

Preparation

This unit is designed to record CD-R and CD-RW

discs bearing the identification logo Compact Disc

Recordable or CD-Rewritable. If CDs do not

conform to this standard, they may not record

properly.

NOTE:There is no video output when it is recording.

1Load a compatible blank CD-R or CD-RW into

the unit.

2Press the FUNCTION button (28/58) to set the

unit to Phono mode.

3Load a pre-recorded cassette tape into the

cassette player. Make sure to get the cassette

to the point in which you want to start the

recording.

4Once the cassette is ready and playing, press

the CD RECORD button (6/56) to begin

recording.

5Once the first side of the cassette is finished,

press the STOP button (13/77).

6Eject the cassette tape and flip it over to the

other side.

7Once it begins playing, press the CD RECORD

button (5/56) again to resume recording.

8Once you have finished the recording, press the

FINALIZE button (14/55). FINAL will show on

the display and Finalize will flash during the

process.

9Once the CD has been finalized, the display will

show F DONE. The CD is now finalized and

ready for use.

NOTE:If the CD is not finalized, it will not play in any

other CD player.

1Load a compatible blank CD-R or CD-RW into

the unit.

2Press the FUNCTION button (28/58) to set the

unit to Phono mode.

3Set the SPEED CONTROL SWITCH (35) to the

correct speed (33 1/3, 45 or 78 rpm) for the

selected record.

4Use the CUE LEVER (33) to raise the tone arm

off its rest. Move the tone arm over the record

and use the cue lever to lower it to the point you

want the recording to start.

5Press the CD RECORD button (6/56). Record

will flash on the LCD. The CD will begin recording.

6Once the first side of the record is finished, press

the STOP button (13/77). R Done will be shown

on the display.

7Turn the record over and repeat steps 4-6 to

record the other side.

8Once you have finished the recording, press the

FINALIZE button (14/55). FINAL will show on

the display and Finalize will flash during the

process.

9Once the CD has been finalized, the display will

show F DONE. The CD is now finalized and

ready for use.

NOTE: If the CD is not finalized, it will not play in any

other CD player.

CD Recording Operation

Recordable

ReWritable

FUNCTION EQ

MONO/STEREO BAND

MUTE

LINE IN EARPHONE

SPLIT TRACK/

CD PAUSE

REPEAT PROGRAM

STAND BY OPEN/CLOSE

POWER

ERASE

VOLUME

DOWN UP

FINALIZE

CD RECORDER

PM MHz

KHz

AM

FM

MW

SENSOR

31 32 33

35

36

34

37

Cassette Operation

Accessory: ADAPTER FOR 45 RPM

87

Antenna

1Make sure the unit is plugged in correctly to an

AC outlet.

2Press the POWER button (17) to turn on the

main power. This button should be left pressed

in even when the unit is not in use. If the main

power is turned off, all preset radio stations will

be lost and will have to be reprogrammed.

3Press the STAND BY button (18/47) to turn on

the unit power. This is the power button that

should be used to turn the unit on or off.

4Once the power is turned on, press the

FUNCTION button (28/58) to switch between

Tuner/CD/Phono/Aux. When switching between

functions, wait 1 second after pressing the

function button before pressing it again. This

gives the unit time to load the correct information

for the selected function.

5While listening to any of the above functions,

you may change the tone of the music by

pressing the EQ button (27/74). Each press of

the EQ button will toggle between the following

settings:

Basic Operation

Turntable Operation

1Press the FUNCTION button (28/58) to set the

unit to Phono mode.

2Set the SPEED CONTROL SWITCH (35) to

the correct speed (331/3, 45 or 78 rpm) for the

selected record.

3Use the CUE LEVER (33) to raise the tone arm

off its rest. Move the tone arm over the record

and use the cue lever to lower it to the point

you want the record to start.

4At the end of the record, the tone arm will return

to its rest.

NOTE: The turntable and the cassette both operate

in the same mode. If a cassette is fully inserted

into the unit, the record player will not play. To

use the record player, make sure the cassette

is ejected.

To play the 45rpm record, place the ADAPTER (46)

on the spindle.

Basic Operation

Outdoor Antenna Grounding

1Press the FUNCTION button (28/58) to set the

unit to Tuner mode

2Press the BAND button (2/59) to select the

desired tuning band (AM/FM).

3Press the TUNING UP (11/68) or TUNING

DOWN button (9/53) to select a station.

4Adjust the volume to the desired listening level.

1Tune into the station that you want to program

into memory.

2Press the PROGRAM button (20/49), Memory

will flash on the LCD.

3Press the PRESET UP (22/54) or PRESET

DOWN (23/52) buttons to select the desired

memory location.

4Press the Program button again to store the

station into memory.

5Once you have the presets stored, you can press

the PRESET UP (22/54) or PRESET DOWN

(23/52) buttons to select your stored stations.

Antenna: for extennal FM reception, the unit is

provided with a FM ANTENNA WIRE (45), move the

wire until the reception is clear and with no

interferences. For AM reception, the unit is provided

with a directional build-in ferrite antenna. Rotate the

set to find the position in which the best reception

is obtained.

General

1While in Phono mode, insert a prerecorded tape

through the Cassette Door (30).

2Adjust the volume level by turning the VOLUME

KNOB (12).

3For fast forwarding, press the CASSETTE

EJECT/F.F (29) half way in. Pressing again, will

stop the fast forwarding and return the cassette

to the playing mode.

4To stop and eject the cassette, press the

CASSETTE EJECT/F.F (29) in completely.

5When one side of the tape finishes playing, the

cassette will automatically stop.

NOTE: Remove the tape from the unit when it is not

in use or stopped.

If an outside antenna is connected to the receiver,

be sure the antenna system is grounded so as to

provide some protection against voltage surges and

buit-up static charges. Article 610 of the National

Electrical Code, ANSI/NFPA 70, provides information

with regard to proper grounding of the mast and

supporting conductors, location of antenna-discharge

unit, connection to grounding electrodes, and

requirements for the grounding electrode. See figure:

NOTE: Please use outside antenna for better reception.

FM Antenna Wire (45)AM Loop Antenna (44)

GROUND CLAMP

ELECTR C

SERVICE

EQUPMENT

ANTENNA

LEAD IN WIRE

ANTENNA

DISCHARGE UN T

GROUNDING

CONDUCTORS

GROUND CLAMPS

POWER SERVICE GROUND NG

ELECTRODE SYSTEM

Radio Operation

Programming Preset Stations

FLAT CLASSIC

POP

JAZZ ROCK