Crosley CFC09LW0 User Manual FREEZER Manuals And Guides L1002466

CROSLEY Upright Freezer Manual L1002466 CROSLEY Upright Freezer Owner's Manual, CROSLEY Upright Freezer installation guides

User Manual: Crosley CFC09LW0 CFC09LW0 CROSLEY FREEZER - Manuals and Guides View the owners manual for your CROSLEY FREEZER #CFC09LW0. Home:Kitchen Appliance Parts:Crosley Parts:Crosley FREEZER Manual

Open the PDF directly: View PDF .
Page Count: 11

Download
Open PDF In Browser	View PDF

CROSLEY

Freezer
Product Registration
Important

.............................

Safety Instructions

............... 2

First Steps ...........................................

2-3

Energy

Saving

3=4

Setting

the Temperature

Freezer

Optional

Ideas ..........................

Care and Cleaning

Control .......... 4

Features

................. 4=6

..............................

Power Failure/
Freezer Failure .......................................
Avoid

Service

Warranty

READ AND SAVE THESE INSTRUCTIONS

2

Checklist

7-8

8

................... 9=10

...............................................

11

297334700(January201o)

Read all instructions before using this freezer.
For your safety
Do not store or use gasoline or other flammable vapors and
liquids in the vicinity of this unit or any other appliance. Read
product labels for flammability and other warnings.

The information contained in this Use and Care Guide will
instruct you on how to properly operate and care for your
product. Please read through the information contained in
your literature pack to learn more about your new freezer.
Record your Model and Serial Numbers
Record the model number and serial number of this freezer
in the space provided below.
Model No.
Serial No.
Register Your Product
The self-addressed PRODUCT REGISTRATION CARD
(shown above) should be filled in completely, signed and
returned to Crosley Corporation.
This Use and Care Guide provides operating instructions
for your model. Use your freezer only as instructed in this
Use and Care Guide.

Child Safety
Destroy carton, plastic bags, and any exterior wrapping
material immediately after the freezer is unpacked. Children
should never use these items for play. Cartons covered with
rugs, bedspreads, plastic sheets or stretch wrap may become
airtight chambers and can quickly cause suffocation.
• A child might suffocate if he crawls into the freezer to hide
or play. Remove the door/lid of the freezer when not in use,
even if you plan to discard the freezer. Many communities
have laws requiring you to take this safety precaution.
Remove or discard any spacers used to secure the shelves
during shipping. Small objects are a choke hazard to children.
Risk of Child Entrapment
Child entrapment and suffocation are not problems of the
past. Junked or abandoned refrigerators or freezers are still
dangerous - even if they will sit for "just a few days". If you
are getting rid of your old refrigerator or freezer, please follow
the instructions below to help prevent accidents:
• Remove the door/lid. If your door has electronic controls,
have it removed by a qualified technician.
• Leave shelves in place so children may not easily climb
inside.
• Have the refrigerant removed by a qualified technician.

ELECTRICAL

iNFORMATiON

These guidelines must be followed to ensure that safety
mechanisms in the design of this freezer will operate properly.
Refer to the serialplate for correct electrical rating.
The power cord of the appiiance is equipped with a
three prong plug for your protection against shock
hazards. It must be plugged directly into a properly
groundedthree prong receptacle, protected with a 15
amp timedelay fuse or circuit breaker. The receptacle
must be installed in accordance with local codes
and ordinances. Consult a qualified electrician.
Receptacles protected by Ground Fault Interrupters
(GFI) are NOT RECOMMENDED. DO NOT USE AN
EXTENSION CORD OR ADAPTER PLUG.
If voltage varies by 10% or more, freezer performance
may be affected. Operating freezer with insufficient
power can damage the motor. Such damage is
not covered under the warranty. If you suspect your
household voltage is high or low, consult your power
company for testing.

This Owner's Guide provides specific operating instructions for your model. Use the freezer only as instructed in
this Owner's Guide. Before starting the freezer, follow
these important first steps.
INSTALLATION
Choose a place that is near a grounded electrical
outlet. Do Not use an extension cord or an adapter
plug.
=

For the most efficient operation, the freezer should
be located where surrounding temperatures will not
exceed 110°F (43°C). Temperatures of 32°F (0°C) and
below will NOT affect freezer operation. Additional
compressor heaters are not recommended.

=

Allow space around the unit for good air circulation.
Leave a 3 inch (75 mm) space on all sides of the
freezer for adequate circulation.
3" (75ram) hJr Space

To prevent the freezer from being turned off
accidentically, do not plug unit into an outlet controlled
by a wall switch or pull cord.

3" (75 turn)

_

3" ("

Do not pinch, knot, or bend the cord in any manner.
OTHER

PRECAUTIONS

To defrost freezer, always unplug unit first.
Never unplug the freezer by pulling on the cord.
Always grip the plug firmly, and pull straight out from
the receptacle.
Turning the temperature control to OFF turns off the
compressor, but does not disconnect the power to the
light bulb or other electrical components.

[ z,'Iv'-la#,#mAvoid fire hazard or electric
shock. Do not use an extension cord or
an adapter plug. Do not remove any
prong from the power cord.
Grounding type
wall receptacle
Do not, under any
circumstances,
cut, remove,
or bypass the
grounding prong.

Power supply
cord with 3-prong
grounding plug

installation

Installation

NOTE: The exterior walls of the freezer may become quite
warm as the compressor works to transfer heat from the
inside. Temperatures as much as 30 ° F warmer than room
temperature can be expected. For this reason it is particularly important in hotter climates to allow enough space for
air circulation around your freezer.
LEVELING
The freezer must have all bottom corners resting firmly on
a solid floor. The floor must be strong enough to support
a fully loaded freezer. NOTE: It is VERY IMPORTANT for
your freezer to be level in order to function properly. If the
freezer is not leveled during installation, the door may be
misaligned and not close or seal properly, causing cooling,
frost, or moisture problems.
To Level Upright Models:
After discarding crating screws and wood base, use a carpenter's level to level the freezer from front-to-back. Adjust
the plastic leveling feet in front, Y2bubble higher, so that
the door closes easily when left halfway open.

DOOR

REMOVAL

(NON-ELECTRONIC

MODELS)

If door must be removed:

Plastic
Leveling

Feet

1.

Gently lay freezer on its back, on a rug or blanket.

2.

Remove two base screws and base panel.

3.

Remove bottom hinge screws.

4.

Remove plastic top hinge cover.

5.

Remove screws from top hinge.

6.

Remove top hinge from cabinet.

7.

Remove door and bottom hinge from cabinet.

8.

To replace door, reverse the above order and
securely tighten all screws to prevent hinge slippage.

I
Crating
Screw

\\\\\

/
Discard

The

/__

(4) Crating

DOOR
Screws

And (2) Wood Bases

Unpacking

and Leveling -- Upright

Models

REMOVAL

(ELECTRONIC MODELS)

If door must be removed:
•

Door hinge is fastened with tamper-proof screws.
Please have a qualified technician remove the door.

To Level Chest Models:
If needed, add metal or wood shims between foot pads
and floor.
CLEANING

(PRIOR

The freezer should be located in
the coolest area of the room, away
from heat producing appliances
or heating ducts, and out of direct
sunlight.

TO USE)

Wash any removable parts, the freezer interior, and
exterior with mild detergent and warm water. Wipe dry.
Do not use harsh cleaners on these surfaces.
Do not use razor blades or other sharp instruments,
which can scratch the appliance surface when
removing adhesive labels. Any glue left from the tape
can be removed with a mixture of warm water and mild
detergent, or touch the residue with the sticky side
of tape already removed. Do not remove the serial
plate.

_To

allow door to

close and seal properly, DO NOT let
food packages extend past the front
of shelves.

Let hot foods cool to room
temperature before placing in the
freezer. Overloading the freezer forces the compressor
to run longer. Foods that freeze too slowly may lose
quality or spoil.
Be sure to wrap foods properly, and wipe containers
dry before placing them in the freezer. This cuts down
on frost build-up inside the freezer.
Freezer shelves should not be lined with aluminum foil,
wax paper, or paper toweling. Liners interfere with cold
air circulation, making the freezer less efficient.
Organize and label food to reduce door openings and
extended searches. Remove as many items as needed
at one time, and close the door as soon as possible.

COOL

DOWN

PERIOD

For safe food storage, allow 4 hours for the freezer to
cool down completely. The freezer will run continuously
for the first several hours. Foods that are already
frozen may be placed in the freezer after the first few
hours of operation. Unfrozen foods should NOT be
loaded into the freezer until the freezer has operated
for 4 hours.
Shelf Front

When loading the freezer, freeze only 3 pounds of
fresh food per cubic foot of freezer space at one time.
Distribute packages to be frozen evenly throughout the
freezer. It is not necessary to turn the control knob to a
colder setting while freezing food.

TEMPERATURE

CONTROL

Electromechanical
Temperature Control (Chest and
Some Upright Models)
The electromechanical temperature control is located inside the freezer on upright models, and on the left exterior
wall on chest models (see figure 1). The temperature is
factory preset to provide satisfactory food storage temperatures. However, the temperature control is adjustable
to provide a range of temperatures for
your personal satisfaction. To adjust
the temperature setting, turn the
temperature control knob clockwise
or counter clockwise. Allow several
hours for the temperature to stabilize
between adjustments.
Figure 1
Standard Electronic Temperature Control (Some Up=
right Frost Free Models)
The standard electronic temperature control is located
outside the freezer (see Figure 1). Temperature is factory
preset to provide satisfactory food storage temperatures.
To adjust the temperature setting, move the UP (A) symbol
for colder temperatures and DOWN (v) symbol for warmer
temperatures on the control panel. Allow several hours for
the temperature to stabilize between adjustments.

every five minutes until the freezer temperature is
below 23°R To silence the buzzer, press the ALARM
RESET button.
Door Ajar Alarm
This feature provides a warning if the the door is open
for more than five minutes. There will be a beep every
five seconds and the "Door Ajar" indicator will light up.
Press "Alarm Reset" to turn the alarm off. The "Door
Ajar" indicator will remain lit unril the door is closed.
If the door remains open for 15 minutes or more, the
interior lamp will turn off.
Should an "E" appear on display, contact your authorized
service technician for repair. Until changes are made,
freezer will continue to run.
Deluxe Electronic Temperature Control (Some Upright
Frost Free Models)
Refer to the Electronics Control Guide supplied when you
purchase a deluxe electronic upright model. See Figure 3
for deluxe electronics control panel.

}
extreme
freeze

temp
diepJay

h°ldf°rF/C°

m
7 _scoldest
0 is off
Alarm
Reset

hold to lock

Temp Alarm
This feature is designed to provide
a warning if the inside temperature
exceeds 23°R "HI TEMP" feature
operates on household electricity.
It will not function if household
electricity is interrupted.

Standard Electronic
Temperature Control
Figure 1

When the freezer is initially plugged in, the red
"HI TEMP" indicator will be on and the buzzer will
sound. The indicator light will stay on until the freezer
temperature is below 23°R To silence the buzzer,
press the ALARM RESET button.
If a malfunction causes the temperature inside the
freezer to rise above 23°F, the "HI TEMP" light will turn
on and the buzzer will sound. The buzzer will sound

control
Joek

i

i,

To turn off freezer, press DOWN (v)
,_
,_
symbol until display shows "1". Press
three more times until display shows "0".
...................................................................
To activate freezer, press UP (A) three
HJTernp
times until display shows "1" then press
DoorAjar
(A) to desired setting.
To keep the temperature setting
from being accidentally changed, the
control may be locked. This is done by
pressing "Alarm Reset" for 3 seconds.
'1" will then appear on display. To
unlock the control, press "Alarm Reset"
for 3 seconds. For the first second,
"U" will appear, and then the current
temperature will appear.

alarm
reset

J

Upright Models
Figure 3

Temp Alarm (ELECTRONIC

models)

This feature is designed to provide a warning if the inside
temperatures reach an unsafe level. The Temp. Alarm
Feature operates on household electricity. It will not function if household electricity is interrupted.
When the freezer is initially plugged in, the red Temp.
Alarm Indicator Light blinks. The indicator light will continue to blink until the freezer has reached a safe freezing
temperature. If a malfunction causes an unsafe temperature inside the freezer, the red light will blink and the
buzzer will sound. To silence the buzzer, press the ALARM
OFF button. The Indicator Light will continue to blink until
a safe freezing temperature is again reached. If the problem is not resolved within 12 hours, the buzzer will turn
on again. If the ALARM OFF button is not pressed, the
buzzer will turn itself
off automatically after

Temp Alarm
Light will
continue
blink.
48 hours, tobut
the red

TILT=OUT SHELF
NOTE: Your freezer may have some, or all of the
features listed below. Become familiar with these features, and their use and care.
SECURITY

LOCK WiTH POP-OUT

KEY

This security lock fastens the door snugly, ensuring stored
food is secure. To lock or unlock the freezer, push the key
into the lock and turn. The key pops out of the lock after it
has been turned.
SLIDE=OUT

BASKET

(SOME UPRIGHT MODELS)

A Slide-Out Basket (some models), located at the bottom
of the freezer, provides separate storage space for items
that are difficult to store on freezer shelves. To remove the
basket, pull out and lift up.
INTERIOR

UPRIGHT

This shelf is located inside on
the freezer door and provides
additional storage space. To
access an item, tilt the top of
the "basket" shelf down.
ADJUSTABLE

DOOR

BiNS (SOME UPRIGHT MODELS)

Adjustable door bins are located inside on the freezer
door and provide flexible
storage space. The number
of bins provided varies by
model.

LIGHT

The light comes on automatically when the door is opened.
To replace the light bulb, turn the temperature control to
OFF and unplug the electrical cord. Replace the old bulb
with a bulb of the same wattage.
ADJUSTABLE

SHELF

(SOME UPRIGHT MODELS)

This shelf can be moved to one or two positions. Lift the
shelf up and out to move to the desired location.
SLIDE=ASIDE

BASKET

(SOME CHEST MODELS)

This basket helps organize odd-shaped items. To reach
other packages in the freezer, slide the basket aside, or lift
out.

Slide-Aside

SOFT FREEZE

PIZZA SHELF (SOME UPRIGHT MODELS)
Here is the place to store up to four extra-large boxes of frozen
pizza without ever having to
....
dig them out from beneath a
pile of other stored goods.
The pizza shelf can be
retracted to provide space
for larger items on the shelf
below, and still store up to
two more pizzas.

Basket

FAST FREEZING SHELVES (MANUAL DEFROST
UPRIGHT MODELS)
These shelves contain cooling coils to freeze foods quickly
and allow cold air to constantly circulate throughout the
freezer. Do not use sharp metal objects such as ice picks
or scrapers to clean the shelves. This could damage the
shelves and reduce their cooling ability. These shelves are
not adjustable.
SHELF

(SOME

ZONE (SOME UPRIGHT MODELS)

Soft Freeze Zone is specifically designed to maintain a higher temperature
than the rest of the freezer
to store products such as
ice cream.

BASKET

TILT-OUT

(SOME

MODELS)

UPRIGHT

MODELS)

This shelf is located inside on the freezer door and provides additional storage space. To access an item, tilt the
top of the "basket" shelf down.

DIVIDER

(SOME

UPRIGHT

MODELS)

Use these handy dividers to keep the various items stored in
your baskets more organized. To change the location of the
divider simply slide your basket out, grab the divider from the
center and rotate in a
counter-clockwise direction until it is disengaged. To assemble,
simply align as shown
in the figure below and
rotate in a clockwise
direction until it spans
into place.

SHELF BOOKEND
(SOME
Glass Shelf Bookend

UPRIGHT

MODELS)

Use these handy bookends to keep the various boxed
items stored neatly in your freezer. To adjust location,
simply slide where desired.
c

Wire Shelf Bookend
Use these handy bookends to keep the various
boxed items stored neatly in your freezer. To adjust
location,simply unsnap the bookend from the wire shelf
and snap into the next desired location.

Damp objects stick to cold metal
surfaces. Do not touch interior metal
surfaces with wet or damp hands,
Freezer must be unplugged (to avoid electrical
hazard) from power source when defrosting unit,
Some upright freezers are frost-free and defrost automatically, but should be cleaned occasionally.
BETWEEN

DEFROSTINGS

To avoid frequent defrosting, occasionally use a plastic
scraper to remove frost. Scrape with a pulling motion.
Never use a metal instrument to remove frost.
DEFROSTING

CHEST DIVIDER (SOME CHEST MODELS)
Use these clever dividers to custom=arrange a variety of
different-sized storage bins in the bottom of your chest freezer.
Use the peel-n-stick labels found in your literature packet to
help remind you which items are stored where. If you have
an item that isn't already covered by one of the pre-printed
labels then use one of the blank labels and a permanent
marking pen to make your own custom label. Labels can be
peeled off when no longer needed and replaced by new and
different ones.

It is important to defrost and clean the freezer when 1Ato
V2inch of frost has accumulated. Frost may tend to accumulate faster on the upper part of the freezer due to warm,
moist air entering the freezer when the door is opened.
Remove food and leave the door open when defrosting the
freezer.
To Defrost Upright Models with Defrost Drain:
Remove the drain plug on the inside floor of the freezer by
pulling it straight out.
. To access external drain tube on models with a base panel,
first remove the two screws from the base panel. Locate
the drain tube near the left center under the freezer.
Place a shallow pan under the drain tube. Defrost water
will drain out. Check the pan occasionally so water does
not overflow (see figure 1).
. A Y2 inch garden hose adapter can be used to drain the
freezer directly into a floor drain. Ifyour model is not equipped
with an adapter, one can be purchased at most hardware
stores.
Replace the drain plug when defrosting and cleaning are
completed. If the drain is left open, warm air may enter the
freezer.

ToDefrost

Chest Models
with Defrost Drain:
Place a shallow pan or
the Divider/Drain Pan (if
equipped)
beneath the
drain outlet. Pull out the
outside drain plug (see
figure 2). A Y2inch garden
hose adapter can be used
to drain the freezer directly
into afloor drain (see figure
3). If your model is not equipped with an adapter, one can
be purchased at most hardware stores.
Pull out the drain plug inside the freezer (see figure 4).
Defrost water will drain out. Check pan occasionally so
water does not overflow.
Replace the drain plugs when defrosting and cleaning are
completed. If the drain is left open, warm air may enter the
freezer.
Hose
Adaptor

Defrost
Drain
Plug

_

Drain Plug
Figure 2

Figure

3

To Defrost Models without
,,"Drain
_--.
Defrost Drain:
Place towels or newspapers
on the freezer bottom to
catch the frost. The frost will
loosen and fall.
Remove the towels and/or
newspapers.
If the frost is soft, remove it
by using a plastic scraper. If
the frost is glazed and hard,
fill deep pans with hot water
and place them on the freezer bottom.
Close the freezer door/lid. Frost should soften in about
fifteen (15) minutes.
Repeat this procedure is necessary.
CLEANING

THE INSIDE

After defrosting, wash inside surfaces of the freezer with
a solution of two tablespoons of baking soda in one quart
(1.1 litres) warm water. Rinse and dry. Wring excess water
out of the sponge or cloth when cleaning in the area of the
controls, or any electrical parts.
Wash the removable parts and door basket with the baking soda solution mentioned above, or mild detergent and
warm water. Rinse and dry. Never use metallic scouring
pads, brushes, abrasive cleaners, or alkaline solutions on
any surface. Do not wash removable parts in a dishwasher.
CLEANING THE OUTSIDE
Wash the cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth.
Replace parts and food.

Do not use razor blades or other sharp instruments, which
can scratch the freezer surface when removing adhesive
labels. Any glue left from the tape can be removed with a
mixture of warm water and mild detergent, or touch the
residue with the sticky side of the tape already removed.
DO NOT REMOVE THE SERIAL PLATE.
VACATION

AND MOVING TIPS

Short Vacations:
Leave the freezer operating during vacations of less
than three weeks.
Long Vacations:
If the freezer will not be used for several months:
Remove all food and unplug the power cord.
Clean and dry the interior thoroughly.
Leave the freezer door open slightly, blocking it open if
necessary, to prevent odor and mold growth.
Moving: When moving the freezer, follow these guidelines
to prevent damage:
Disconnect the power cord plug from the wall outlet.
Remove foods, then defrost, and clean the freezer.
Secure all loose items such as base panel, baskets,
and shelves by taping them securely in place to
prevent damage.
In the moving vehicle, secure freezer in an upright
position to prevent movement. Also protect outside of
freezer with a blanket, or similar item.
If leaving the freezer
door open while on vacation, make
certain that children cannot get into
the freezer and become entrapped.

NOTE: Do not open freezer door
unnecessarily
if freezer is off for
several hours.
If a power failure occurs, frozen foods will stay frozen for
at least 24 hours if the freezer is kept closed. If the power
failure continues, pack seven or eight pounds of dry ice
into the freezer every 24 hours. Look in the Yellow Pages
under Dry Ice, Dairies, or Ice Cream Manufacturers for local dry ice suppliers. Always wear gloves and use caution
when handling dry ice.
If the freezer has stopped operating, see Freezer Does
Not Run in the Troubleshooting
Guide. If you cannot
solve the problem, call an authorized servicer immediately.
If the freezer remains off for several hours, follow the directions above for the use of dry ice during a power failure.
If necessary, take the food to a local locker plant until the
freezer is ready to operate. Look in the Yellow Pages under
Frozen Food Locker Plants.

TROUBLESHOOTING

Before calling for service, review this list. It may save you time and expense. This list
includes common occurences that are not the result of defective workmanship
or
materials in this appliance.

GUIDE
PROBLEM
FREEZER

CAUSE

CORRECTION

DOES NOT RUN

Freezer does not run.

e

e

e

e

e

Freezer runs too much or too

e

Freezer is plugged into a circuit
that has a ground fault interrupt.
Temperature control is in the
OFF position.
Freezer may not be plugged in,
or plug may be loose.
House fuse blown or tripped
circuit breaker.
Power outage.

• Use another circuit. If you are unsure about the outlet,
have it checked by a certified technician.
• See Setting the Temperature Control Section.

Room or outside weather is hot.

e

•
e

e

long.
• Freezer has recently been
disconnected for a period of
time.
• Large amounts of warm or hot
food have been stored recently.
Doors are opened too frequently
or too long.
Freezer door may be slightly
open.
Temperature Control is set too
low.
Freezer gasket is dirty, worn,
cracked, or poorly fitted.

e

Ensure plug is tightly pushed into outlet.
Check/replace fuse with a 15 amp time-delay fuse. Reset
circuit breaker.
Check house lights. Call local Electric Company.
It's normal for the freezer to work harder under these
conditions.
It takes 4 hours for the freezer to cool down completely.

• Warm food will cause freezer to run more until the
desired temperature is reached.
• Warm air entering the freezer causes it to run more.
Open doors less often.
• See "DOOR PROBLEMS" Section.
e

e

Turn control knob to a warmer setting. Allow several hours
for the temperature to stabilize.
Clean or change gasket. Leaks in the door seal will cause
freezer to run longer in order to maintain desired
temperature.

Interior Freezer temperature
too cold.

is

• Temperature Control is set too
low.

• Turn the control to a warmer setting. Allow several hours
for the temperature to stabilize.

Interior

is

• Temperature Control is set too
warm.
• Door is kept open too long or is
opened too frequently.
• Door may not be seating
properly.
• Large amounts of warm or hot
food may have been stored
recently.
• Freezer has recently been
disconnected for a period of
time.

• Turn control to a colder setting. Allow several hours for the
temperature to stabilize.
• Warm air enters the freezer every time the door is
opened. Open the door less often.
• See "DOOR PROBLEMS" Section.

• The external freezer walls can
be as much as 30°F warmer
than room temperature.

• This is normal while the compressor works to transfer
heat from inside the freezer cabinet.

Freezer temperature

tOO warm.

Freezer external surface
temperature is warm.

SOUND

• Wait until the freezer has had a chance to reach its
selected temperature.
• Freezer requires 4 hours to cool down completely.

AND NOISE

Louder sound
freezer is on.

levels whenever

Longer sound levels when
compressor comes on.

Modern freezers have increased
storage capacity and more
stable temperatures. They
require a high efficiency
compressor.

• This is normal. When the surrounding noise level is low,
you might hear the compressor running while it cools the
interior.

• Freezer operates at higher
pressures during the start of the
ON cycle.

• This is normal. Sound will level off or disappear as freezer
continues to run.

e

[
PROBLEM
SOUND

AND NOISE

CAUSE

_

CORRECTION

(Cont.)

Popping or cracking sound
when compressor
comes on.

,, Metal parts undergo expansion
and contraction, as in hot water
pipes.

,, This is normal. Sound will level off or disappear as
freezer continues to run.

Bubbling or gurgling
like water boiling,

,, Refrigerant (used to cool
freezer) is circulating
throughout the system.

,, This is normal.

Vibrating

or rattling

sound,

noise.

WATER/MOISTURE/FROST
Moisture forms on inside
freezer wails.

WATER/MOISTURE/FROST
Moisture forms on ouside of
freezer,

ODOR

Freezer is not level. It rocks on
the floor when it is moved
slightly.
Floor is uneven or weak.
Freezer rocks on floor when it
is moved slightly.
Freezer is touching the wall.

,, Level the unit. Refer to "Leveling" in the First Steps
Section.
,, Ensure floor can adequately support freezer. Level the
freezer by putting wood or metal shims under part of the
freezer.
,, Relevel the freezer or move freezer slightly. Refer to
"Leveling" in the First Steps Section.

INSIDE FREEZER
,, This is normal.

,, Weather is hot and humid,
which increases internal rate of
frost build-up.
,, Door may not be seating
properly.
,, Door is kept open too long, or
is opened too frequently.
OUTSIDE

,, See "DOOR PROBLEMS"

Section.

,, Open the door less often.

FREEZER

,, Door may not be seating
properly, causing the cold air
from inside the freezer to meet
warm moist air from outside.

,, See "DOOR PROBLEMS"

Section.

IN FREEZER

Odors in freezer

,, Interior needs to be cleaned,

l"

Clean interior with sponge, warm water, and baking

,, the
Foods
freezer.
with strong odors are in I ,, soda.
Cover the food tightly.
DOOR

PROBLEMS

Door will not close.

• Freezer is not level. It rocks on
the floor when it is moved
slightly.
,, Floor is uneven or weak.
Freezer rocks on floor when it
is moved slightly.

,, This condition can force the cabinet out of square and
misalign the door. Refer to "Leveling" in the First Steps
Section.
,, Level the floor by using wood or metal shims under the
freezer or brace floor supporting the freezer.

,, Light bulb is burned out.

,, Follow directions under "Interior Light" in the Freezer
Features Section.
,, See "FREEZER DOES NOT RUN" Section.

LIGHT BULB IS NOT ON
Light bulb is not on.

,, No electric current is reaching
the freezer.

10

Major Appliance Warranty

Information

Your appliance is covered by a one year limited warranty. For one year from your original date of
purchase, Crosley will pay all costs for repairing or replacing any parts of this appliance that prove to
be defective in materials or workmanship when such appliance is installed, used and maintained in
accordance with the provided instructions.
*In addition to warranty shown above, ask your dealer about Crosley Extended Limited Warranty that
comes to you at no extra charge for the 2nd through lOth years.
Exclusions

This warranty

does not cover
with original

the following:

1.

Products

2.

Product that has been transferred
Canada.

3.

Rust on the interior

or exterior

4.

Products

"as-is"

5.

Food toss due to any refrigerator

purchased

serial numbers

used in a commercial

Products

Service calls which do not involve

malfunction

Service calls to correct the installation
Expenses
etc.,which

11. Surcharges

including,

or mileage

Damages

DISCLAIMER

or defects

in materials

than in accordance

of your appliance

or workmanship,

or for appliances

with the provided

or to instruct

light bulbs, air filters,

but not limited to, any after hour, weekend,
expense

for service calls to remote

Damages to the finish of appliance
cabinets, walls, etc.

genuine
external

the USA or

instructions.

you how to use your appliance.

for making the appliance accessible for servicing, such as removal of trim, cupboards,
are not a part of the appliance when it is shipped from the factory.

10. Service calls to repair or replace appliance
knobs, handles, or other cosmetic parts.

13.

determined.

outside

failures.

use or used other

9.

12.

be readily

setting.

8.

charges,

or cannot

party or removed

by this warranty.

or freezer

7.

household

altered

owner to another

of the unit.

are not covered

6.

not in ordinary

that have been removed,

from its original

caused by: services

or home incurred

performed

water filters,
or holiday

areas, including

during

by unauthorized

installation,

WARRANTIES;

LIMITATION

or

service calls, tolls, ferry

including

service companies;

trip

but not limited to floors,

use of parts other

than

service companies; or
fires, or acts of God.

OF REMEDIES

CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED
REPAIR OR REPLACEMENT AS PROVIDED

consumables,

the state of Alaska.

Crosley parts or parts obtained from persons other than authorized
causes such as abuse, misuse, inadequate power supply, accidents,
OF IMPLIED

other

shelves,

WARRANTY SHALL BE PRODUCT

HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES,

INCLUDING

WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR
OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. CROSLEY SHALL NOT BE
LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL
EXPENSES RESULTING FROM ANY BREACH OF THIS WRI-FI-EN LIMITED WARRANTY OR ANY IMPLIED
WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE
LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRI-FI-EN WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.

If You Need
Service

Keep your receipt,

delivery

should service be required.
Service under this warranty
numbers below.

slip, or some other

appropriate

payment

record to establish

the warranty

period

If service is performed,
it is in your best interest to obtain and keep all receipts.
must be obtained by contacting Crostey at the addresses or phone

This warranty only applies in the USA and Canada. Your appliance is warranted by Crosley Corporation.
Crosley authorizes no
person to change or add to any obligations
under this warranty. Obligations for service and parts under this warranty must be
performed by Crostey or an authorized service company. Product features or specifications
as described or illustrated are subject
to change

without

FOR WARRANTY
USA
Canada

notice.
INFORMATION

FOR PRODUCT INFORMATION

CONTACT:

CONTACT:

336-761-1212

800-944-9044
800-265-8352

Crosley Corporation
111 Cloverleaf Dr
Suite 200
Winston-Salem, NC 27103
www crosley corn

11



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 11
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 4, 0, 0, 13
Create Date                     : Thu Mar 04 04:20:53 2010
Author                          : 
Title                           : 
Subject                         : 

EXIF Metadata provided by EXIF.tools