Cross Match Technologies SMC800M MOBILE BIOMETRIC DEVICE User Manual 870245 V1 2

Cross Match Tecnologies, Inc. MOBILE BIOMETRIC DEVICE 870245 V1 2

UserManual.wiki >

Cross Match Technologies >

SMC800M User Manual

Users Manual

Cross Match® Technologies, Inc.Be.U MobileSMC-800 SeriesMobile Biometric DeviceUser ManualDraft

iContentsUser tasksBefore you use the Be.U Mobile ................................ 1Start the Be.U Mobile ............................................... 2Capture fingerprints ................................................. 2Take a photo of the person ....................................... 2Collect personal information .................................... 2With the keyboard ...............................................3From a contact card .............................................3From a contactless card ........................................3From a bar code ..................................................3Save a record ........................................................... 4Send a record ........................................................... 4Field ReferenceFront view of the Be.U Mobile ................................... 5Rear view of the Be.U Mobile .................................... 6Key pad .................................................................... 7LED indicators .........................................................7Power and batteries ................................................. 8Install the battery ....................................................8Use external power ..................................................9Charge the battery ..................................................9Battery LED Indicator ......................................... 10Replace the battery ................................................ 11External Battery Charger ........................................ 11Insert a battery into the charger .......................... 12Status indicator ................................................. 12Clean the Be.U Mobile ............................................. 13Clean and prepare the fingerprint sensor .............. 13Every day ......................................................... 13Before each touch .............................................. 13Clean the touch screen ........................................... 13Clean the card reader ............................................. 13Clean the two cameras ........................................... 14Start the Be.U Mobile ............................................. 14Turn off the Be.U Mobile (suspend) ........................ 15The keypad method ........................................... 15The interface method ......................................... 15Draft

ii Be.U Mobile™ Technical Reference - 870246 V1.2Automatic shutdown .......................................... 16Adjust the automatic shutdown delay ...................16Reset the Be.U Mobile (shutdown) ......................... 16Reset when the device does not answer .................... 17The backup battery ................................................ 18Connect the Be.U Mobile ......................................... 18The desktop cradle ................................................19The vehicle cradle .................................................. 20Before you use the Be.U Mobile .............................. 20Operating system .................................................. 21The Control Panel .............................................. 23Power properties ............................................... 24Check the battery charge 24How to adjust the suspend timeout 25Set the clock ..................................................... 25Set the date ......................................................26Set the time ...................................................... 26Calibrate the touch screen ...................................... 27User interface features ........................................... 28Display .................................................................28Set the duration of the backlight .......................... 29Adjust the intensity of the backlight ..................... 29Backlight quick adjustments .................................... 30CertificationsFCC Statement ........................................................ 31CE Mark - Compliance Notice .................................. 32TUV Compliance ..................................................... 32WEEE recycling program ........................................ 32IndexDraft

11Chapter 0User tasksTHIS CHAPTER DESCRIBES HOW TO USE THE PRODUCTNAME TO COMPLETE YOUR BASIC TASKS.WarningThis restriction applies to those versions of the SMC800 Series Be.U Mobile with RF options (G1. G2. W1. W2, and BT) built in. The option configuration for your device is shown on the serial placard located under the battery pack.This PDA is intended and expected to be operated as a hand-held and hand-operated-only portable (that is, relative to hand) device with a separation distance of at least 8 in (20 cm) from a person’s body.During operation, the strap is not intended for use as a belt-clip or a body-worn accessory.Before you use the Be.U MobileComplete the following steps:1 Clean the device.•The biometric sensor•The touch screen•The card reader•The barcode reader lens•The color camera lens. See “Clean the Be.U Mobile” on page 13. 2 Install the battery in the Be.U Mobile. See “Install the battery” on page 8 for instructions and illustrations.3 Connect an external power source if the battery does not have a full charge. See“Use external power” on page 9.Draft

Contents2 Be.U Mobile™ Technical Reference - 870246 V1.24 Start the Be.U Mobile. See “Start the Be.U Mobile” on page 14. The Be.U Mobile also starts when an external power source is connected. 5 Set the date and time. See “Set the clock” on page 24. You are prepared to use the Be.U Mobile.Start the Be.U Mobile1 Press and hold the power button for two seconds. The desktop appears.2 Start your program.3 Go to the next step in your work flow.Capture fingerprintsUse the following procedure to capture fingerprints.1 Start your fingerprint capture program.2 Turn toward the person you plan to fingerprint.3 The person must put the finger on the sensor, parallel with the surface of the sensor. The base of the nail must be even with the arrows at the sides of the sensor.4 Start your capture sequence.5 Go to the next step in your work flow.Take a photo of the personUse the following procedure to take a picture of the person (a mug shot).1 Start your photo capture program.2 Hold the Be.U Mobile up and point the back of the device toward the person you want to photograph.3 Adjust your distance from the person so that the head and shoulders fill the frame.4 Capture the photograph.5 Save the photograph.6 Go to the next step in your work flow.Draft

3Collect personal informationYou can use a number of methods to collect personal information about the person you plan to fingerprint. Use one of the following procedures.With the keyboard1 Go to your capture program.2 Use your keyboard to enter the personal information.3 Go to the next step in your work flow.From a contact cardNoteThe card reader is an optional feature.1 Go to your capture program.2 Make sure the card reader slot on the side of the device is clean.3 Slide the contact card into the Be.U Mobile contact card reader. The card reader imports the information into the Be.U Mobile.4 Select to import the personal information from the card.5 Your program can then display the information.6 Remove the card from the card reader.7 Go to the next step in your work flow.From a contactless card1 Start your capture program.2 Hold the Be.U Mobile with the back of the device toward you.3 Slide the contactless card under the clip for contactless cards on the back of theBe.U Mobile. The card reader imports the information into the Be.U Mobile.4 Select to import the personal information from the card.5 Your program can then display the information.6 Remove the card from under the clip.7 Go to the next step in your work flow.Draft

Contents4 Be.U Mobile™ Technical Reference - 870246 V1.2From a bar codeNoteThe bar code reader is an optional feature.1 Start your capture program.2 Turn the Be.U Mobile, so that the back of the device is toward the bar code3 Select to import the personal information from a bar code.4 Start the bar code capture sequence.5 Align the Be.U Mobile with the bar code, so that the device reads the bar code.6 Your program can then display the information.7 Go to the next step in your work flow.Save a recordFollow the steps in your program to save a record. Send a recordFollow the steps in your program to send a record to an agency.Draft

52Chapter 0Field ReferenceFront view of the Be.U Mobile#Description1Fingerprint Sensor. 2Touch Screen. 3LED Indicators. 4Keypad. 612345Draft

Contents6 Be.U Mobile™ Technical Reference - 870246 V1.2Rear view of the Be.U Mobile5Speaker. 6 Smart Card Reader (access slot for contact cards). #Description1234567891Bar code Scanner (left) and Color Camera (right). 2Smart Card Reader (access slot for contact cards). 3Smart Card Holder (for contactless cards). #DescriptionDraft

7WARNINGIf you open the case of an SMC-800 device, or of one of the accessories, you disable the warranty.Key padThere are eight buttons on the key pad. The green is the Enter button and the OK button.The red is the Escape button and the Cancel button.The three white bars are the Menu button.The four arrows on the center button are like the keyboard arrows. The three function buttons are F1, F2, and F3. The power button turns on the device, turns off the device, and restores the device from the suspend mode.LED indicatorsThere are three LED indicators on the Be.U Mobile.One is the battery LED indicator. See “Battery LED Indicator” on page 10 for a description of how the indicator shows you the status of the battery. The other two LEDs are available for programs to use.4Strap. 5Battery Access Door. 6Communication Port. 7SAM Access Door. 8The antenna for the contactless card. 9Door-Lock Screws. The screws have thumb holds that you rotate to loosen the screws without a tool.#DescriptionDraft

Contents8 Be.U Mobile™ Technical Reference - 870246 V1.2Power and batteriesInstall the battery1To open the battery compartment: 1 Loosen the door lock screws (1).2 Lift the door. The screws remain attached to the door.3 When the door is open, remove the door. 4 Remove the battery.5 Insert the new battery (2) in the compartment behind the door. The flat side of the battery contacts the Be.U Mobile. The contacts (3) are toward the bottom of the device23Draft

9NoteThe battery is rechargeable. You must use the correct battery for your model. Do not use the battery from a different model or device.Use external powerA power supply (or AC adapter) can charge the battery and maintain the charge while you use the device on the cradle. Use the power supply with the provided cradle. The Be.U Mobile has a single, proprietary connector. The cradle allows the power supply to share the connection with other cables.CautionThe external power supply is for the SMC-800 series. Do not use another model of power supply. Do not use the power supply with other equipment without authorization from Cross Match. WarningThe external power supply is for office use. Use or storage of the power supply in wet conditions cancels the warranty and can cause dangerous shocks and electrical fires.NoteThe battery charges when a power supply is connected to the device. See “Charge the battery” for complete information about the LED indicators and the charge mode.Charge the batteryThe battery charges when you connect the device to a power supply. The time needed to reach a full charge changes with the level of charge in the battery. At 22°C, a discharged battery takes from 6 to 6.5 hours to reach full charge in the device. The action to charge the battery takes longer when the temperature decreases toward 10°C, or increases toward 45°C. The temperature of the battery must be more than 10°C and less than 45°C for the battery to accept the charge.Draft

Contents10 Be.U Mobile™ Technical Reference - 870246 V1.2Battery LED IndicatorThe top left LED (1) between the display and the keypad is the Battery Indicator. The LED lights when the Be.U Mobile charges the battery and when the battery has a full charge. The following table describes the LED indications.WarningStop the device and remove the battery if one or more of the following occurs.• You detect an odor.• The battery is hot to the touch.• The battery color changes.• The battery does not appear to be normal.• You see the leaks from the battery package.WarningIf the battery fluid gets into your eyes, do not touch your eyes. Immediately clean your eyes with clear water and get immediate medical help.LED color DescriptionThere is no lightThe device cannot charge the internal battery.• The device is not inserted correctly into the cradle.• The cradle power supply is not connected.• The battery is not inserted correctly. • The cable or charging circuitry is damaged. • The internal charging temperature is outside the allowed range (0°C-45°C).You cannot charge the battery.Amber The battery is not charged.Amber flashesThe device is set to operate on the battery and the battery charge is low.Green The battery is charged. 1Draft

11Replace the batteryDuring extended service in the field, you must change the main battery. Use the external battery charger to prepare a set of replacement batteries. The internal battery helps you to change the main battery without the loss of your work and your settings. You must change the battery within 5 minutes to prevent the loss of data.CautionAlways turn off the Be.U Mobile before you remove the main battery to prevent damage to the device and data loss. See, “Turn off the Be.U Mobile (suspend)” on page 15 for instructions.To replace the battery, open the battery access door as shown in “Install the battery” on page 8. Do the reverse of the procedure to remove the battery.WarningPersonal injuries can occur if you do not replace the batteries correctly.•Remove the battery if the battery cannot be used.•Keep the battery away from direct sunlight and the heat from other sources.•Do not open the battery.•Do not put the battery package in water, or allow the battery to become wet.•Do not put the battery on metal objects. Do not keep the battery with metal objects. Short-circuits can occur between the contact pins and the metal objects and cause heat, fire and leakage.•Do not touch the contacts of the battery. The battery does not function correctly when the contacts are dirty or are damaged,.External Battery ChargerYou must manage the charge of the batteries with the external charger and a set of spare batteries. Cross Match provides an accessory for this purpose, the battery charger (part no. SP-BC-02-B).The operation of the battery charger is automatic. When you insert a battery in the charger, the battery charges and continues until the battery reaches a full charge.Draft

Contents12 Be.U Mobile™ Technical Reference - 870246 V1.2The charger has an AC adapter. Connect the adapter to a correctly grounded 110/115 VAC power.Then connect the AC adapter into the back of the charger:NoteThe battery charger is for the batteries of the SMC-800 series. Do not use another charger. Do not use the charger with other types of batteries, unless authorized by Cross Match. WarningThe external battery charger is for office use. Use or storage of the external charger in wet conditions cancels the warranty and can cause dangerous shocks and electrical fires.Insert a battery into the chargerPut the battery into the charger as shown in “External Battery Charger” on page 11. Make sure that the two contacts on the battery are in the charger socket.Status indicatorThere is an LED indicator on the top side of the charger that displays the status of the charger. The following table describes the indications that the LED gives and describes the meaning of each indication.WarningStop the device and remove the battery if one or more of the following occurs.:• You detect an odor• The battery is hot to the touch • The battery color changes• The battery does not appear to be normal• You see leaks.If the battery fluid gets into your eyes, do not touch your eyes. Clean your eyes with clear water and get immediate medical help.LED color DescriptionNo light The power supply is not connected. The charge is not accepted.Red A battery is detected and has started charge.Flashes red The temperature is out of range (when the temperature is not in the range of 10°C-45°C the charge stops).Green The battery has a full charge.Draft

13Clean the Be.U MobileMake sure that the Be.U Mobile is clean. The following sections describe how to clean the biometric sensor, the touch screen, and the card reader.Clean and prepare the fingerprint sensorDirt, oils, or other material on the sensor can cause an unacceptable fingerprint image. Check how to clean the sensor in “Every day”. How to clean the sensor before each capture is described in “Before each touch”.Every dayWarningDo not use harsh fluids and abrasive materials to clean the fingerprint sensor.Clean the fingerprint sensor. Use a microfiber cloth to apply alcohol to the surface of the sensor. Move the cloth in a left and right direction until the sensor surface is clean. Repeat this process as necessary. Make sure that no dirt remains on the sensor.Prepare the fingerprint sensor. Use a microfiber cloth to apply fragrance-free skin lotion to the surface of the sensor. Make sure that you remove all the visible lotion from the sensor to complete the process. The lotion improves the quality of the fingerprint image.Before each touchClean the sensor with a microfiber cloth to remove any dirt or finger marks. Clean the touch screenClean the screen with a microfiber cloth. Use tap water. Do not use solvents. Always use the stylus or your finger tip to select the items. Do not use finger nails, pens, or pencil erasers.Clean the card readerThe smart card reader is an opening in the Be.U Mobile case. During wet conditions, moisture can enter the card reader. If liquids, dust, or other particles reach the card reader, do not insert a smart card unless the card reader is clean and dry. Draft

Contents16 Be.U Mobile™ Technical Reference - 870246 V1.2NoteAfter you release the power button, a blank screen appears and the device turns off. There is no data loss. Programs continue. When you turn on the device, the Be.U Mobile returns to the previous condition.Automatic shutdownThe device automatically enters the sleep condition if there is no user activity for an amount of time that you can set. There is no data loss. Programs continue. When you turn on the device, the Be.U Mobile returns to the previous condition.Adjust the automatic shutdown delayRead the section “How to adjust the suspend timeout” on page 5 for complete details and instructions on setting this delay.Reset the Be.U Mobile (shutdown)The Be.U Mobile can enter a condition where programs stop, devices stop, or the Be.U Mobile does not communicate. You must reset the device to restart or you must turn off then turn on the Be.U Mobile.The normal process to reset the Be.U Mobile is as follows.Draft

171 From the desktop, press the Windows Start button (1). The Start menu appears.2 In the Start menu, tap the Programs command (2). The Programs menu appears.3 In the Programs menu, tap the Shutdown command (3). The device stops immediately.4 Press and hold the Power button until the Be.U Mobile starts.Reset when the device does not answerThere can be conditions when the Be.U Mobile does not answer your commands. When you have tried all other methods to control the device, use the following procedure to reset the Be.U Mobile.1 Open the battery compartment door. See “Install the battery” on page 8.2 Remove the battery.3 Close the battery compartment door.4 Press and hold the Power button (1) for 15 seconds.5 Open the battery compartment door. 6 Replace the battery.This is the reverse of Step 2.7 Close the battery compartment door.8 Press the Power button (1) until the Be.U Mobile starts. 1231Draft

Contents18 Be.U Mobile™ Technical Reference - 870246 V1.2The turn off sequence, which depends on the condition of the device, can take 30 seconds. All data that are not saved are lost. All programs are stopped.If the procedure does not correct the problem, contact your equipment administrator.The backup batteryThe SMC-800 devices all have an internal rechargeable backup battery that provides emergency power to some circuits in the device. The backup power applies when there is no main battery and when the main battery is discharged. The purpose is to save the condition of the device.The backup battery:• Saves the suspended condition of the device during the battery replacement, for the time needed to replace the battery.• Completes the shut down process of the device when the 15 minute delay without a battery has expired.• Maintains the internal clock when you store the device without the battery installed.WarningThe backup battery is a NiMH battery that the user cannot replace. An authorized technician must change the battery. Incorrect installation or programming can cause the battery to explode.The backup battery charges automatically when a charged main battery is installed in the device and you charge the main battery. The backup battery takes 24 hours to reach a full charge.CautionIf the backup battery does not have enough charge when you replace the main battery, you can accidentally reset the device and erase information.Connect the Be.U MobileA connector that transmits USB host, slave, RS-232 and Ethernet communication signals from the devices is available.There is no cable (USB, Ethernet or serial) that connects to the Be.U Mobile. You must use a desktop cradle or a vehicle cradle to connect to those ports. The following sections describe each cradle.Draft

19The desktop cradleThe desktop cradle for the Be.U Mobile is a power charger and communication base that provides a method to charge the main battery. The cradle has eight connectors:• 1 power connector (1)• 1 Ethernet connector (2)• 1 serial connector (3)• 4 USB host connectors (4)• 1 USB client connector (5) The power connector allows you to connect the external power supply to the cradle.The Ethernet connector allows you to connect to the Internet and to a local network. The Serial connector allows you to connect other external devices like card readers to the Be.U Mobile.The 4 USB host connectors allow the Be.U Mobile to accept input from USB devices. You can use a host connector to attach a keyboard or a mouse to the Be.U Mobile.The USB client connector allows you to connect the Be.U Mobile to a USB port on a computer. The computer then becomes the host for the Be.U Mobile. The connection allows the ActiveSync on the computer to transfer the data between the computer and the Be.U Mobile. See the Be.U Mobile Technical Reference.4123454Draft

Contents20 Be.U Mobile™ Technical Reference - 870246 V1.2CautionThe desktop cradle is for indoor use. Do not use or keep the cradle in cold, humid or wet conditions. You can cancel the warranty and can damage the cradle and the Be.U Mobile.The vehicle cradleThe vehicle cradle for the Be.U Mobile is a power charger and a communication support device. You can rotate the cradle to set the Be.U Mobile to different angles.The vehicle cradle allows you to charge the battery and has the following ports:• 1 USB client connector • 1 serial connectorWarningThe vehicle cradle is for inside use. Do not use or keep the cradle in cold, humid or wet conditions. You can cancel the warranty and damage the cradle and the Be.U Mobile.Before you use the Be.U MobileNote The Be.U Mobile does not operate without a battery installed.• Install the battery in the device. See “Install the battery” on page 8 for instructions and illustrations.Draft

21• Connect an external power source if the battery does not have a full charge. See“Use external power” on page 9 for instructions and illustrations.• The device automatically turns on when an external power source is connected. See “Start the Be.U Mobile” on page 2-14.• Adjust the date and time. See “Set the clock” on page 25 for instructions.Operating systemThe Be.U Mobile runs on the Windows CE operating system. The operating system is the host for all other programs that run in the device. The operating system provides the device components, like the screen and the keyboard. The operating system also manages the look and feel of the programs.A desktop is the support for programs and for the windows displayed by programs. This desktop has two parts. •The task bar at the bottom of the screen contains the main controls and status icons of the system. •The desktop background displays icons and program windows, takes your input, and displays results.The operating system includes the following components:•The Windows Explorer is a browser that navigates through the folders stored in read-only memory. Double-tap the My Device icon on the desktop to open this browser to examine the root directory of the file system.•The Internet Explorer is a browser you use with a network connection (Ethernet, WiFi, GSM or CDMA). The Internet Explorer This icon opens a browser onthe storage memoryWorkspace background , containing icons, over which applications show their windowsTaskbar , al ways sho wnunder the workspaceInput Panel con trol (SIP)Tas k /window swi tche r cont rolClockWindows Menu buttonDraft

Contents22 Be.U Mobile™ Technical Reference - 870246 V1.2allows you to view Web pages stored on the Internet and on an Intranet. An icon on the desktop opens the Internet Explorer.•The Command Prompt is a text method to run the operating system commands and components.•The Control Panel allows you to adjust many settings of your Be.U Mobile.Use the Windows Menu button to access all these components, and any program that can be installed on the unit. The Menu button is in the lower left corner of the screen in the task bar. Use the stylus to tap the button. The Start menu appears. Select the Programs command. The Programs menu appears. Select the program you require from the menu. Draft

23The Control PanelThe Control Panel is in the Settings menu, where you can find the commands that allow you to adjust parts of the operating system.When you start the Control Panel, a window appears that shows a list of icons that match features that you can adjust. A menu appears at the top of the screen, with a help button and a Close button (the X button). Tap the Close button to leave the control panel. A scroll bar at the right of the screen allows you to move to the content that is not on the screen.If you tap the View menu, you can go to other modes, like the List mode which shows more selections at one glance. Double-tap on an icon or a menu item to open a program. The menu shows you information about that feature and gives you the method to change the settings. Draft

Contents24 Be.U Mobile™ Technical Reference - 870246 V1.2Power propertiesThe operating system provides some features that are related to the management of the power supply and the batteries. You use these features through the Control Panel. Tap Power in the Control Panel:This program is arranged into tabs that you can select with a tap on the name.Check the battery chargeIn the Power Properties program, tap the Battery tab to see the status of the main battery and of the backup battery:Draft

25How to adjust the suspend timeoutIn the Power Properties program of the Control Panel, tap the Schemes tab to see the power schemes. A power scheme is a set of actions that use the power efficiently. You can apply these settings with an external power supply and with the battery.When the Be.U Mobile is turned on, but not in use, the device uses the power schemes to save the battery power.The following table describes the power management schemes.Set the clockThe Be.U Mobile has an internal clock that maintains the current date and time. The operating system uses the date and time for time-tags on files, mode control, and security. The clock runs continuously, when the device is in sleep mode or is shut down. The internal clock stops when both the main battery and the backup battery are discharged. Scheme MeaningUser Idle The User interface items are deactivated first to save power. The backlight is turned off. Tap the screen or press a button to restore the normal mode.System IdleThe System Idle scheme is like the User idle scheme. More components of the operating system and of the device are disabled, like network interfaces. Tap the screen or press a button to restore the normal mode.Suspend The device stops and appears to be shut down. You must turn on the Be.U Mobile to return to the normal condition. There is no data lost. Programs are left open. The Suspend condition saves the maximum amount of power.Draft

Contents26 Be.U Mobile™ Technical Reference - 870246 V1.2When you turn on the Be.U Mobile, the current time appears in the task bar. To adjust the settings of the clock, double-tap the clock in the task bar or open the Control Panel. To open the Control Panel, tap the Start button and select Settings/Control Panel. Select Date/Time from the list of features managed by the panel. The Date/Time Properties program opens with a calendar, the time, the time zone, and a check box for Daylight Savings Time.Set the date 1 On the calendar, tap the date you require.2 Tap the arrow buttons at the top of the calendar to move through the months. You can Tap the year and an arrow allows you to select the current year.Set the time 1 Tap the hour, minute, or second to change. 2 Use the arrows at the right of the time box to adjust the time.3 In the Time Zone box, tap the arrow to see a drop-down list. You must select your time zone for the Be.U Mobile to use the correct time in communications with other devices.4 Select the time zone from the list.5 Select the check box to activate the Daylight Saving Time rules for your time zone. The time automatically changes.Draft

27Calibrate the touch screenThe touch screen is the feature of the Be.U Mobile that you must calibrate before use. The calibration translates the touch signals received from the screen to correct screen positions. If your taps and stylus positions do not match on the screen, your touch screen needs the calibration procedure. There is a program in the Control Panel to calibrate the touch screen. 1 Tap the Windows menu button. 2 Select the Settings command.3 Select the Control Panel command. 4 In the list of commands, tap the Stylus command. The Stylus Properties program opens for touch screen adjustments. The window has two tabs, Double-Tap and Calibration. Use the first tab to adjust the operating system to detect the difference between a double-tap and two taps.5 Double-tap the upper icon.6 Double-tap the lower icon to test how the program detects the double-tap.7 Repeat Steps 4-5 until you set a good speed for a double-tap. Go to the next step.8 Select the Calibration tab to start the touch screen calibration process. The Calibration tab contains a Recalibrate button. 9 Tap the Recalibrate button to start the process. A cursor in the shape of a plus sign appears in the center of a white screenDraft

Contents28 Be.U Mobile™ Technical Reference - 870246 V1.210 You must touch the middle of the cursor with the stylus, and hold the stylus steady. The program gets the signals for that location and moves the cursor to another location on the screen.11 Repeat Step 9 at the new location.The procedure calibrates the touch screen and displays the following message:12 Tap the screen or press the OK button on the keypad to accept the new calibration settings. If you made an error, press the Cancel button to return to previous settings.User interface featuresThe operating system provides the features to manage the display. DisplayThese features are in the Display Properties program on the Control Panel. Tap Display in the Control Panel to start the program.The program is divided into three tabs: Background, Appearance, and Backlight. Tap on the name to select a tab. Do not use the backlight unless required. The backlight can shorten the life of the battery. Draft

29Set the duration of the backlightTo set a time period after which the backlight turns off:1 Tap the Battery Power check box.2 Tap the arrow to see a drop-down list.3 Select the time until the program turns off the backlight when the Be.U Mobile is on battery power.4 Tap the External Power check box.5 Tap the arrow to see the drop-down list.6 Tap the time until the program turns off the backlight when the Be.U Mobile is on external power.7 Tap the OK button to save your selections and return to the previous window.Adjust the intensity of the backlightTo set the backlight level, use the following steps.1 On the Display Properties window, tap the Advanced button, The Advanced Brightness Options window appears.2 Tap and hold the slider control.3 Move the slider to the brightness you need.4 Tap the OK button to save your selection and return to the previous windowDraft

Contents30 Be.U Mobile™ Technical Reference - 870246 V1.2Backlight quick adjustmentsYou can adjust the brightness of the backlight as follows.1Press and hold the Menu key (1).2 Then:• Press the Up arrow (2) to increase the brightness.• Press the Down arrow (3) to decrease the brightnessUse the feature to adjust the backlight when you are in low light and the backlight is set to the minimum value. You can use the keypad to set the backlight to a good level.NoteThe backlight can shorten the battery life. To increase the battery life, you must adjust the backlight brightness to the minimum good level. Turn off the backlight when you use the Be.U Mobile in daylight.1234Draft

3133CertificationsTHIS CHAPTER DESCRIBES THE CERTIFICATIONS THAT APPLY TO THE BE.U MOBILE™ DEVICE.FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Operation is subject to the following two conditions: (1) this device may not cause harmful interferences, and (2) this device must accept any interferences received, including interference that may cause undesired operation.Information to user. The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. In cases where the manual is provided only in a form other than paper, such as on a computer disk or over the Internet, the information required by this section may be included in the manual in that alternative form, provided the user can reasonably be expected to have the capability to access information in that form.Draft

Contents32 Be.U Mobile™ Technical Reference - 870246 V1.2CE Mark - Compliance Notice This equipment is in conformance with the requirements of the European Council Directive listed below:73/23/EEC Low Voltage Directive with amendment 93/68/EEC89/336/EEC EMC Directive with amendments 92/31/EEC and 93/68/EECTUV ComplianceTUV Mark is an independent product-safety testing and certification organization. The TUV Marks may only be used on or in connection with products certified by TUV and under the terms of written agreement with TUV. An electrical, mechanical or electro-mechanical product bearing the North American TUV Listed mark signifies that it was tested and meets the minimum requirements of prescribed product safety standards. Moreover, the mark indicates that the manufacturer's production site conforms to a range of compliance measures and is subject to periodic follow-up inspections to verify continued conformance.WEEE recycling programWEEE is the European Commdevices directive 2002/96/EC on waste electrical and electronic equipment which, together with the RoHS Directive 2002/95/EC, became European Law in February 2003, setting collection, recycling and recovery targets for all types of electrical goods. WEEE means Waste Electrical and Electronic Equipment, products that run on electrical power.Due to its nature, any SMC-800 series device and related accessories may contain small quantities of substances known to be hazardous to the environment or to human health if released in the environment. For this reason, Waste Electrical and Electronic Equipment (commonly known as WEEE) should never be disposed of in the public waste stream. The label affixed to this product is a reminder to dispose of this product in accordance with local WEEE regulations.WEEE-Reg.-No. DE 34468562 for Be.U Mobile.Draft

Index -1IndexAadjust the automatic shutdown delay 16adjust the backlight 29amber flashes 10amber steady light 10Bbackup battery 18bar code camera 14batterycheck the charge 24replace 11battery led indicator 10Be.U Mobile 1before first use 20calibrate the touch screen 27capture fingerprints 2clean 1the barcode reader lens 1the biometric sensor 1the card reader 1the color camera lens 1the touch screen 1collect personal information 2from a bar code 3from a contactless card 3with the keyboard 3connect an external power source 1device statebattery is weak 15shut down, the battery is OK 14suspended, the battery is OK 14the battery is not installed or the battery is discharged 15field reference 5front view 5install the battery 1key pad 7LED indicators 7off stateshut down 14suspended 14operating system 21power and batteries 8charge the battery 9external battery charger 11install the battery 8replace the battery 11status indicator 12Draft

Index -2 Be.U Mobile™ Technical Reference - 870246 V1.2use external power 9rear view 6save a record 4send a record 4set the date and time 2start 1, 2take a picture 2Ccalibrate the touch screen 27camerasmaintenance 14capture fingerprints 2card reader maintenance 13CE compliance notice 32cellular restriction 1certifications 31charge the battery 9check the battery charge 24clean the Be.U Mobilebefore each touch 13card reader 13every day 13touch screen 13two cameras 14clean the fingerprint sensor 13collect personal information 2from a contact card 3color cameraclean the lens 1take a photo of the person 2connect the Be.U Mobile 18vehicle cradle 20cradledesktop 19vehicle 20Ddesktop cradle 19display 28backlightadjust the intensity 29Eevery dayclean the fingerprint sensor 13prepare the fingerprint sensor 13external battery charger 11Ffcc statement 31field reference 5Draft

Index -3 front view 5Ggreen LED 10, 12GSM/GPRS cellular restriction 1Hhow to adjust the suspend timeout 25Iinsert a battery 12install the battery 8Kkey pad 7LLEDs 7Mmug shot camera 14Ooperating system 21control panel 23set the clock 25set the clockset the time 26set the date 26Ppower properties 24adjust the suspend timeout properties 25power status indicator 12prepare the fingerprint sensor 13Rrear view 6red LED 12Reset (complete shutdown) 16the device does not answer 17Ssave a record 4send a record 4set the clock 25set the date 26set the duration of the backlight 29set the fate and time 2shut down 14shutdown delay 16Draft

Index -4 Be.U Mobile™ Technical Reference - 870246 V1.2start the Be.U Mobile 1, 14steady amber light 10suspend 25suspend the Be.U Mobile 15automatic shutdown 16automatic shutdown delay 16keypad method 15user interface method 15suspended 14System Idle 25Ttake a photo 2touch screen calibration 27touch screen maintenance 13turn off the Be.U Mobile (suspend) 15turn on the Be.U Mobile 14TUV compliance 32two cameras 14Uuse external power 9User Idle 25user interface features 28adjust the backlight 29backlight quick adjustments 30WWEEE recycling program 32Draft

Navigation menu