Crystal Video Technology CB880120120409 HD Wireless Video Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1691972
Application ID	n7dvLxGCiqhco2G9i8EVIA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	314.03kB (3925345 bits)
Date Submitted	2012-05-07 00:00:00
Date Available	2012-05-07 00:00:00
Creation Date	2012-04-26 19:44:52
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2012-04-26 19:50:30
Document Title	鑻辨枃璇存槑涔?2-13.cdr
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

WIRELESS HD TRANSMISSION SYSTEM
USER MANUAL
EU Environmental Protection
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with you local authority or retailer
for recycling advice.
This user manual applies to:
Tr a n s m i t t e r : C V 6 6 0 8 / C B 8 8 0 1 / C B 8 8 0 8 / C B 2 6 0 1
Receiver : CV6620/ CB3801
Important Information
Please read this user manual before you use this product, it contains all the notes and important things regarding operating this product.In accordance with the safet precautions and
operating instructions listed on this user manual, our applies provided the product is handled
properly for its intended use, but may not apply to below cases:
● Repairs or product modification and alterations have been executed by unauthorized
personnel.
● The damages are caused by accidents including but not limited to lightning, fire, exposed
to rain or water,and moisture.
● Do not use provided power adapter with specific power voltage which are not compliant
with the rated voltage range in the attached label of the power adapter in package.
● The model label on the product has been modified or the warranty tag has been removed
by unauthorized personnel.
Safety Precaution
Danger!
High voltage
To reduce the risks of electricity, do not remove or open the
cover. No user-serviceable parts are inside. Please return to
original factory for maintenance
The high temperature in the process of operating the device
may cause the high risk of scalding.
Beware of
hot surfaces!
Caution!
Please use our standard power adapter.Detailed information
Please refer to the rated voltage range showed on the label at
the back of package's power adapter.
Danger: Be careful with electricity.
● As connecting any equipment (such as any player or TV , etc.),
please turn off the power to the product before any operation is undertaken.
● Power outlet: To prevent electric shock or fire, short circuit, please make sure the type of
electrical plug used on the receiver's and transmitter's power cord are compliant with the
rated voltage range in the attached label of the power adapter in package.
● Power cord: Do not place any heavy articles above on the power cord. To avoid being
stepped on or pinched by heavy items, the power cord should not be located on the place
where people pass by frequently.
● Power overloading: Avoid overloading wall's electrical outlets and extension cord or other
multi-socket; otherwise could result in electronic shock or fire.
● Lightning: For protection from lightning or when the product is left unattended for a long
period, please disconnect it from the power source.
● Please disconnect the power cord from the power outlet when you are not using the
receiver and transmitter, this will reduce the risk of electric shock or fire.
Warning
● This product should not be exposed to dripping or splashing. Do not place any object filled
with liquid on the product(eg. vases).
● To avoid electric shock, please do not block or stick anything on the air vent of product; do
not remove the cover or put the object just like pins, steel wire into the gap of the air vent.
● Please place the receiver/emitter on a flat with hard and stable surface.
● Ventilation: please do not block the air vents on the receiver/transmitter or place any heavy
object on top of them . Blocking the air flow can damage the product itself. Please make
sure that there is adequate ventilation distance between the receiver and TV, and also put
the product away from direct sunlight or any source of heat.
● Water Exposure: To reduce the risk of electric shock or fire , please do not expose the
receiver/transmitter to rain or moisture.
● We're no responsible for any damage or result caused by unsing other adapters instead of our
standard adapters
Special Notice
● Although the product has provided the function of data encryption when transmitting,
you still need to pay attention to deliberate signal interception. There will be the
Possibility of a third party intentionally intercept the transmission signal since the product
adopt wireless communication. Please do not use the product on confidential and important
communications, or life-related communications The main concern is that the content of
wireless communication might be received by the third party's wireless devices deliberately
or accidentally.
● The impact of radio waves (such as the following environment may cause the abnormal
audio and video(blocked image, noise ...etc.).
1 ) Transmit near the wall which is hard for the radio waves to get through.
2 ) Quite close to the refrigerator, metal fitment and appliances, or next to the crowded
situation.
● This product has been tested and manufactured to comply with national electrical safety
rules, however, there will be noise caused by the interference with other machines in rare
cases. If the interference is happened, please keep a certain distance away from other
machines.
● The product is susceptible to interference from 5GHz wireless local area network or other
wireless devices.
● Optimal range between transmitter and receiver is between 1 meter and 30 meters within
line of sight indoor.
● Please do not set up the transmitter and receiver in metal shelf, or it will hinder the
wireless communications.
● 1080P/60 Hz Wireless transmitting.
● It will take 15-20 seconds to boot the system before wireless communication start, the
media receiver can not be operated during this time.
● This wireless product for indoor only,has minute amounts of radiation, pls keep at least 20cm away from
while using
CONTENTS
About The Instructions
01
CONTENTS
About the instructions
02
Brief introduction
02
Packing List
03
Interface Introduction
05
Wireless HD Transmitter introduction(CV6608, CV8801, CB8808, CB2601)
05
Wireless HD Receiver introduction(CV6620, CV3801)
07
Installation and Use
09
Connect to HD player
09
How to connect to PC
10
CB2601 Loop Output Installation Instruction
12
Installation instructions for CB3801
14
Basic Function
16
IR Remote Extension Connector Instruction
16
Unicast (point-to-point) Code Matching Procedures
17
Extension Operation Instruction
18
WHDI Function
18
WHDI Remote Control Operation Instruction
19
HID Keyboard/Mouse Remote Control Operation Instruction
23
3D Video Transmission
25
Appendix
27
OSD（On Screen Display）
27
List of Supported HID Wireless Keyboard/Mouse Model
27
Graphic Card Setting
28
Indictor description
32
Product Specifications
34
Troubleshooting
35
- Please read this manual carefully before you use these products and retain it properly for
future reference.
- If there is any doubt or difficulty in the process of product usage, please feel free to contact
us or the dealer.
- The company reserves the authority to amend the specification.
- The user manual is applied to the following model of wireless HD transmitter and receiver:
◆
Basic model of product support point to point, multi-point to multi-point
wireless transmission, no other special function supporting.
Cv6608, CV6620, CB8801, CB8808,CB3801, CB2601
◆
Product model suffix with a "W" means supporting WHDI software function.
CV6608W, CV6620W, CB8801W, CB8808W, CB3801W, CB2601W
◆
Product model suffix with a "H" means supporting HID PC Remote Control function.
CV6620H,CB8801H,CB8808H,CB3801H,CB2601H
◆
Product model suffix with a "D" means supporting 3D video transmission function.
CV6608D,CV6620D,CB8801D,CB3801D,CB2601D
◆
Product model suffix with "WHD" means supporting WHDI software, HID
Keyboard/Mouse Remote Control function and the 3D video transmission function.
CV6620WHD, CB8801WHD, CB3801WHD, CB2601WHD, CB8808WH
Brief Introduction
Thank you for choosing this product. This product adopt the latest high-definition
(HD) wireless audio/video(AV) transmission technology which can enable the wireless
transmission of any uncompressed HD 1080P video and audio from an HD source
device(Set-top-box/ HD Player/ Blu-ray DVD/ PC/ TV/ Game Machine/Recorder) to an
HD display device(LCD TV/LED TV/Projector). You can always enjoy the quality of life
and more convenient life without the expense, mess or hassle of HD cables.
Product Feature
■ Support 1080P/60Hz, no latency with using real-time HD video transmission technology
■ Support point-to-point, multi-point to multi-point transmission
■ Support USB HID remote control,
■ Support IR remote control .(Support 38K remote’s signal protocol.)
■ Compatible with EDID 1.1, support HDMI 1.3 (3D series product support HDMI 1.4)
■ Support 128 AES image encryption
■ Support OSD, WHDI 1.0 specifications
■ Full hardware design, no software requested, plug-and-play.
02
TX:CV6608
AV Sender Packing List
Wireless HD Transmitter
CV6608 x 1
Base x 1
IR Remote Extension
Connector X 1
Power Supply
(5V/2A) x 1
RX:CB3801
Please check the packing list carefully after unpacking, if any part is missing, please
contact your dealer. Accessories of all models are subject to the following packing list.
TX:CB8808
Packing List
Wireless HD
Transmitter
CB8808 x 1
Wireless HD Receiver
Bracketx 1
CB3801 x 1
Base x 1
HDMI Cable x 1
WHDI Remote Control x1
(CV6620W/ CV6620WD/
CV6620WHD )
HDMI Cable x 1
AD Adapter WHDI Remote Control x1
( CB3801W / CB3801WH/
x1
CB3801WD/CB3801WHD )
IR Remote Extension
Receiver x 1
* Mini USB to USB female x 1
( OPTIONAL )
* Mini USB to USB female x 1
( OPTIONAL )
Note: The WHDI remote control is standard accessories of model CV6620W, CV6620WD,
CV6620WH,CV6620WHD which support WHDI software function, and USB cable is the
optional accessories of model CV6620H and CV6620WHD.
STICK Packing List
TX:CB8801
*Adapter
VGA Adapter
5V/1A
x1
( OPTIONAL )
HUB Packing List
Power Supply
(5V/2A) x 1
03
Audio Cable
x1
Note: Mini HDMI adaptor and power supply are the optional accessories, please consult
the supplier before your purchase.
TX: CB2601
RX:CV6620
Power Supply
(5V/2A) x 1
Wireless HD Receiver
CV6620 x 1
USB Cable
x1
Wireless HD Transmitter
CB2601 x 1
Power Supply
(5V/2A) x 1
Wireless HD
Transmitter
CB8801 x 1
*Adapter
USB Cable * HDMI to Mini HDMI * HDMI Adapter 5V/1A
( OPTIONAL )
( OPTION )
x1
( OPTION )
Base x 1
IR Remote Extension
Connector X 1
Audio Cable
x1
* Mini USB to USB female x 1
( OPTIONAL )
* Please take all the actual accessories as the standard.
04
Interface Introduction
CB2601
Wireless HD Transmitter
Model: CB2601
Transmitter Interface Introduction
CV6608
Wireless HD Transmitter
Model: CV6608
VGA IN
NETWORK
INDICATOR
IR slot
VIDEO
INDICATOR
NETWORK
INDICATOR
VGA 2
INDICATOR
VIDEO
INDICATOR
HDMI 1
INDICATOR
MINI USB IN
CODE KEY
HDMI OUT
AUDIO IN
IR
HDMI IN
DC IN
HDMI IN
DC IN
CODE KEY
CB8801
Wireless HD Transmitter
Model: CB8801
CODE KEY
VIDEO
INDICATOR
NETWORK
INDICATOR
MINI USB IN
HDMI IN
CB8808
Wireless HD Transmitter
Model: CB8808
CODE KEY
VIDEO
INDICATOR
NETWORK
INDICATOR
MINI USB IN
AUDIO IN
05
1. DC IN
Connect this port to 5V/2A power adapter( spec: 5.5mm,
DC 5V ).
2. MINI USB INPUT PORT
connect Mini USB input port to the computer’s USB port or the 5V/1A power
adapter (optional) by the USB cable for power supplying.
(Note:CB2601 do not support power supplying through mini USB)
* HID Keyboard/Mouse Remote Control function is supported when connected the
mini USB input port to the computer.
3. HDMI IN
Connect to the HDMI Output port of a HD AV source device.
4. VGA IN
Connect to the VGA port of computer.
5. AUDIO IN
Connect to the audio output port of computer by the audio cable.
6. IR SLOT
Remote control function is available when the supplied IR remote extension
connector is connected to IR out port.
7. CODE KEY
Code Key Function: press the code key for 5 seconds , the transmitter will turn into
the code matching process.
CB2601: Switch VGA/HDMI input source through pressing code matching key shortly.
8. NETWORK INDICATOR
CV6608/CV2601
On: The wireless network connection between transmitter and receiver
is successful .
Off: The wireless network connection between transmitter and receiver
is failed .
Flash Rapidly: The device is faulty.
VGA IN
06
CB8801/CB8808
On: The wireless network connection between transmitter and receiver is successful .
Flash Slowly: Transmitter is ready for connecting.
Flash Rapidly: The device is faulty.
9. VIDEO INDICATOR
On: The HD AV source is connected successfully.
Off: The HD AV source is failed to connect.
10. HDMI INDICATOR
ON:HDMI input is selected currently.
OFF:HDMI input is not selected currently.
11. VGA INDICATOR
ON: VGA input is selected currently.
OFF: VGA input is not selected currently.
12. HDMI OUT
HDMI out port supports loop out function, it is to connect to a high definition
display devices (HDTV, projector) when using.
Note: The extended function which marked in * requires hardware supporting, as to
more detailed information, please refer to the operation instructions of HID Keyboard/
Mouse Remote Control function on P23.
Receiver Interface Introduction
CV6620
Wireless HD Receiver
Model: CV6620
NETWORK
INDICATOR
VIDEO
INDICATOR
CODE KEY
IR RECEIVER
MINI USB IN
HDMI OUT
07
DC IN
CB3801
Wireless HD Receiver
Model: CB3801
CODE KEY
VIDEO
INDICATOR
NETWORK
INDICATOR
IR IN
MINI USB IN
DC IN
HDMI IN
1. DC IN
Connect this port to 5V/2A power adapter ( spec: 5.5mm,
DC 5V ).
2. HDMI IN
Connect to HDMI Output of a HD display devices (HDTV, projector).
3. MINI USB INPUT PORT
* HID Remote Control function is supported when connected the mini USB input port
to the Mouse or keyboard.
Note: MINI USB port do not support power supply
4. CODE KEY
Code Key Function: press the code key for 5 seconds , the receiver will turn into the
code matching process.
(It needs to use remote control to match code under WHDI software mode)
5. NETWORK STATUS INDICATOR
CV6620
On:The wireless network connection between transmitter and receiver is successful .
Off: The wireless network connection between transmitter and receiver is failed.
Flash:The device is faulty
CV3801
On:The wireless network connection between transmitter and receiver is successful .
Flash slowly: Transmitter is ready for connecting.
Flash rapidly: The device is faulty.
6. VIDEO INDICATOR
On: The video source is connected successfully.
Off: The video source is failed to connect.
7. IR SENSOR(RECEIVING) WINDOW
The remote control is aligned to the IR sensor window of receiver when using.
Note: The extended function which marked in * requires hardware supporting, as to
more detailed information, please refer to the operation instructions of HID
Keyboard/Mouse Remote Control
08
Product Installation Instructions
Connect to HD player
1. Install the transmitter and receiver respectively on base.
*To avoid affecting the transmission distance and image effect, please do not
place any article on or beside the transmitter.
7.Wait for 15 to 25 seconds, the network and video indicators will turn on,
after that, the video connection is successful. TV screen display player's
broadcasting content and OSD information on TV screen will be prompted as
“NETWORK CONNECTED, VIDEO CONNECTED"
RX:1.x.xx
TX:1.x.xx
1920x1080P
Freq:5xxx
NETWORK CONNECTED. VIDEO CONNECTED.
HD PLAYER
POO3
POO3
IR remote
extension connector
HD PLAYER
HD TV
Transmitter
Transmitter
Receiver
HDTV
Receiver
2. Connect the transmitter with player by the HDMI cable.
3. Plug the IR extension cable into the IR Out jack of transmitter, place the IR
remote extension connector in front of player's IR receiving window.
4. Power on transmitter and turn on the HD player.
8. Use HD player's remote control at TV's side to control HD player
RX:1.x.xx
TX:1.x.xx
1920x1080P
Freq:5xxx
NETWORKING CONNECTED. VIDEO CONNECTED.
IR OUT
HDMI
HDMI cable
HDMI I N
HDMI OUT
HDMI
POWER
HD TV
Receiver
Remote controler
POO3
How to connect to PC
Power supply
HD PLAYER
Transmitter
IR remote
extension connector
5. Connect the receiver with HDTV / Projector by HDMI Cable.
6. Power on HDTV and receiver. When the transmitter and receiver are properly
connected and the network has been connected, OSD information on TV screen
will be prompted as: “ NETWORK CONNECTING...”
Vid
Ne
tw
eo
ork
TX:CB8801
HDMI Interface
HDMI cable
HDMI
HDMI
HDMI OUT
HDMI IN
Freq:5xxx
NETWORK CONNECTING...
HDMI
USB
RX:1.x.xx
1920x1080P
1.CB8808 should be connected with the VGA port through the VGA adapter.
2.Connect CB8801/CB8808 to Laptop/PC USB port by the USB cable; connect
the Audio In port of transmitter with Audio Out port of Laptop/PC by the
audio cable.
Transmitter
POWER
HD TV
09
Power supply
USB
USB cable
Laptop
10
Vid
Ne
tw
5. Wait for 15 to 25 seconds, the network and video indicators will turn on , the
video connection is successful. OSD information on projector (HDTV) screen will
be prompted as “NETWORK CONNECTED, VIDEO CONNECTED" and display video
source content of PC/ Laptop's desktop.
eo
ork
VGA adapter
VGA
TX:CB8808
VGA Interface
Transmitter
AUDIO OUT
Audio cable
USB
USB cable
RX:1.x.xx
TX:1.x.xx
1920x1080P
Fre q : 5 x x x
N E T W O R K C O N N E C T E D. V I D E O C O N N E C T E D.
Laptop
3. Connect CV6620 with the projector(HD TV)by HDMI cable.
HDTV
HD TV
HDMI cable
HDMI
HDMI
HDMI OUT
HDMI IN
USB
6. If the wireless network status indicator turns on, but this video status indicator
doesn't turn on, please set the computer as “Copy main display” or “Extended
the main display”.(please refer to P28)
CB2601 Loop Output Installation Instruction:
POWER
Projecter
Power supply
Receiver
1. Connect the VGA port of CB2601 to VGA port of the laptop device by the VGA
cable and connect the Audio In port of transmitter with Audio Out port of
laptop by audio cable.
2. Connect HDMI port of CB2601 with HD player by HDMI cable, plug the IR
extension cable into the IR slot jack of transmitter, place it in the front of player's
IR receiving window.
VGA cable
Audio cable
RX:1.x.xx
V2
H1
HDMI
HDMI
HDMI OUT
VIDEO
Freq:5xxx
NET WORK
1920x1080P
NETWORK CONNECTING ...
AUDIO OUT
VGA
4.Power on projector(HDTV) and receiver. When the transmitter and receiver are
properly connected and the network has been connected, OSD information on
projector screen will be prompted as: "NETWORK CONNECTING ..."
Laptop
POO3
Transmitter
Power supply
IR remote
extension connector
HD Player
OSD
11
12
3. Connect“HDMI OUT”port on CB2601's front panel to the HDTV1 by the HDMI
cable, the TV screen will show the content of default input source. Switch VGA /
HDMI input source by pressing code matching key shortly.
1. Screw CB3801 with the bracket, rotate the screw clockwise until fix it, adjust
the receiver up and down, then fix it with proper angle, and twist the wrench
clockwise to fix the direction of receiver.
1.HDMI In
NE TWORK
VIDEO
V2
H1
HDMI OUT
HDMI
HDMI OUT
HDMI cable
HDMI
Installation instructions for CB3801
2.VGA In
USB
Switch VGA / HDMI
input
HD TV
Transmitter
90°
4. Connect the the receiver to tne HDTV2 by HDMI cable. Power on HDTV
and receiver. When the transmitter and receiver are properly connected and the
network has been connected, OSD information on TV screen will be prompted
as:"NETWORK CONNECTING ..."
NETWORK
USB
RX:1.x.xx
VIDEO
360°
Freq:5xxx
NETWORK CONNECTING...
HDMI cable
HDMI
HDMI
Barcket
HDMI OUT
HDMI OUT
1920x1080P
Barcket
POWER
Power supply
HDTV
Receiver
5. Wait for 15 to 25 seconds, the network and video indicator will turn on, that is the
video connection is successful. OSD information on ( projector ) HDTV screen will
be prompted as “NETWORK CONNECTED, VIDEO CONNECTED", and then screen
show the content of default input source. The program is show on TV1 and TV2
simultaneously.
TX:1.x.xx
1920x1080P
Freq:5xxx
RX:1.x.xx
TX:1.x.xx
1920x1080P
Freq:5xxx
Connecting to CB3801...
NETWORK CONNECTED. VIDEO CONNECTED.
NETWORK CONNECTED. VIDEO CONNECTED.
HDMI
VGA
HDMI
HDMI IN
RX:1.x.xx
2.Connect the CB3801 with monitor by HDMI cable ,plug the IR cable into the IR
jack of receiver and use the supplied double sided tape to fix the IR head in the
front side of the monitor. Plug into the power supply of receiver, the OSD
information on TV screen will be prompted as: “Connecting to CB3801”
Receiver
NETWORK
VIDEO
V2
H1
Laptop
HDMI
HD TV 1
HD TV 2
Transmitter
Receiver
Remote control
Power supply
IR Receiver
HD TV
HD Player
13
14
3. Wait for 15 to 25 seconds, the network and video indicators will turn on, the
video connection is successful. OSD information on projector (HDTV) screen will
be prompted as “Connected to CB3801" and display video source content of PC/
Laptop.
Notice: As to the specific model of transmitter's installation steps, please refer to
the product installation instruction in this chapter.
Basic Function
IR Remote Extension Connector Instructions
Use HD player's remote control at TV's side to control HD player.
Operating Instructions
1.Plug the IR extension cable into the slot out jack of transmitter, place the IR
remote extension connector in front of the player.
HD Player
KRO
Transmitter
IR remote
extension connector
OED
IV
WTEN
Transmitter
RX:1.x.xx
Connected to CB3801
1920x1080P
Freq:5xxx
NETWORK CONNECTING...
HD TV
Receiver
VIDEO
Remote control
NETWORK
HD TV
Receiver
Remote controller
15
2.When the system is working properly, users can use HD player's remote control
at TV side to control HD player; it should be aligned to IR sensor window of receiver.
Remarks
(1) Remote extension connector only supports 38KHz remote's signal protocol.
(2) Please make sure the transmitter and receiver are located in the effective
reception distance and range, if they are located out of the range, the signal
wouldn't be received.
16
Unicast (point-to-point) Code Matching Procedures
Code matching are defult set in factory ,user do not need to repeat this operation.
Operation of re-matching code for TX and RX
1. Power on transmitter and receiver.
2. Use tweezers or paper clips to press the code key of transmitter and receiver for
5 seconds and then loosen from the code key.
3. Wait for 30 to 60 seconds, the network indicators of transmitter and receiver will
turn on, after that, the code matching is successful. If code matching is not
successful, please repeat the code matching procedures.
WHDI Function
*Product model suffix with a "W" means supporting WHDI function.
Supported model: CV6608W, CV6620W, CB8801W, CB8808W, CB3801,CB2601W
WHDI (Multipoint-to-Multipoint/Multi-cast) function means that a receiver can be
connected to many transmitters respectively, and the transmitter can also be
connected to different receivers respectively. Users can choose to connect to any
different transmitter by WHDI remote control at receiver's side.(HD video source)
Example Applications of WHDI Function (3 transmitters and 2 receivers )
1. Match code of 2 receivers with 3 transmitters respectively.
2. Connect transmitter to different HD device source respectively by HDMI cable
and power on the devices.
(As to the device installation instruction, please refer to the installation
instructions for specific model of product on P09)
Press the code keys
simultaneously for
TX1:CV6608W
DVB
V2
KRO
TX3:CV6608W
SONY BD
H1
TX2:CB8801W
Stick0203
TX:CV6608
VIDEO
3~5 Sec
NETWORK
RX:CV6620
OED
IV
WTEN
3. Connect 2 receivers to HDTV respectively by HDMI cable.
Press the code keys
simultaneously for
VIDEO
NETWORK
3~5 Sec
TX:CB8801/CB8808
RX:CV6620
RX1:CV6620W
RX2:CB3801W
4. Power on receiver and HDTV, the receiver will automatically connecting to
the transmitter which was connected with the receiver successfully last time,
the OSD information on TV screen will be prompted as the following picture:
Connecting to Stick0203...
Press the code keys
simultaneously for
3~5 Sec
RX:CV6620
TX:CB2601
OSD Display
17
18
5. Wait for 15 to 25 seconds, the network and video indicators will turn on, the
OSD information on TV screen will be prompted as the following picture and
the disappear in 3 seconds.
Connected to Stick0203
Add New Video Source (WHDI Product Code Matching)
WHDI supports multiple transmitters with one receiver. You can add additional
transmitters as refer to the following steps:
1. Press [MENU] key of the WHDI remote control to enter the main menu, press
direction key to enter [Add new Video Source] or press [Add] key to add video
source. Please make sure that the remote control is pointing to receiver's IR
sensor window at the operation process.
Setup
6. You can use WHDI remote control to select different transmitter (player)
TX1:CV6608W
DVB
HDTV1
Add new Video Source
Remove Video Source
Modify Video Source
WHDI Remote Control
Receiver
RX1:CV6620W
KRO
OED
IV
WTEN
HDTV2
TX2:CB8801W
Stick0203
VIDEO
2. Press the code key of transmitter for 3~5 seconds and then loosen from the
code key, OSD information will be prompted as “Please Activate Registration
On Transmitter Unit”.
NETWORK
RX2:CV3801W
NETWORK
VIDEO
V2
H1
TX3:C B2601 W
SONY BD
Adding Stick0203
Press OK to continue or Exit to cancel
Transmitter
WHDI Remote Control Operation Instruction
MENU
EXIT
1. Enter the main menu
Press the code keys
simultaneously for
2. Return to previous menu
3~5 Sec
SOURCE
1 .MENU
3. SOURCE
2 .EXIT
4. Operate for up, down, left and right
4. Direction
key
directions on the menu screen
OK
OK
5. OK
DELETE
ADD
8. GUEST
7. ADD
10. 2nd Video
source
WHDI Remote Control
19
11. 3nd Video
source
4. The code matching will be completed
after about 30 seconds, and the video
source will be connected to automatically.
Adding Stick0203...
Connected to Stick0203
7. Enter [Add New Video Source]
INPUT DEVICES
3. Press [OK] key to enter the code
matching process.
5. Press OK to confirm the operation
6. Enter [Remove Video Source]
GUEST
6. DELETE
9. 1st Video
source
Transmitter
3. ENTER [Select Video Source]
8. System powering down
9. Connect to 1st Video source
10. Connect to 2nd Video source
11. Connect to 3nd Video source
5. If there need to add more new video source, please repeat the above 1 to 4 steps.
20
Rename Video Source
Select Video Source
1. Press [Source] key, the list of video
sources will be displayed on screen.
2. Use [UP]/[DOWN] direction keys to choose
a video source, press [OK] key to confirm
connecting to the one selected.
Select Video Source
Connected to Stick0203
Stick0203
SONY BD
DVB
1. Press [MENU] key and choose "Modify
Video Source " from main menu.
2. Select the video source needed
renaming from the video source list
and press [OK] to confirm.
Setup
Choose Source To Rename
Add new Video Source
Remove Video Source
Modify Video Source
Stick0203
SONY BD
DVB
Setup
Quick Connect to Video Source
1. Press [1] key of input devices to connect directly to the 1st video source in the source
list; Press [2]/[3] key to connect directly to 2nd/3rd video source in the source list.
3. Use [LEFT ][RIGHT ]direction keys to
change cursor position Use [UP][DOWN]
to modify the content of the character
4. Press [OK] to save the modified name.
Rename Video Source
Select Video Source
R itck0203
Stick0203
SONY BD
DVB
Setup
WHDI Remote Control
Remove Video Source
1. Choose [Remove Video Source] on the
main menu or press [DELETE] key to quick
enter [Remove Video Source] menu.
2. Select the video source wanted be
deleted from the video source list.
Setup
Choose Source To Remove
Add new Video Source
Remove Video Source
Modify Video Source
Disconnect Wireless Link
3. press [DELETE] key
Removing Stick0203
Press OK to continue or Exit to cancel
21
Power Down Mode
1. After pressing [GUEST ] key, system will
enter power down mode.
2. Press [GUEST ] again to resume work.
Powering Down..
Stick0203
4. Press [ok] to Remove
Removing Stick0203..
5. The video source is removed,
return to main menu.
Setup
Add new Video Source
Remove Video Source
Modify Video Source
Standby Mode
1. When receiver disconnect from transmitter
and there is not any operation to run, the
system will turn into Standby Mode, and the
OSD information will be prompted as
“Wireless Off ”.
2. Press [SOURCE] or [MENU] key to resume work.
Wireless Off
22
HID Remote Control Operation Instruction
* Product model suffix with a "H" means supporting HID function.
Supported model: CV6620H, CB8801H, CB8808H, ,CB3801H,CB2601H
Function Instruction
Installation of HID Driver
1. Run the driver installation package , at the first installation, the language
selection dialog box will pop up as follows:
HID Keyboard/Mouse Remote Control function support users to use keyboard/mouse at
receiver(Monitor) side to control the PC at transmitter side.
Note: Since one USB port in receiver can only support one wired
keyboard or mouse at a time, there recommend to use the wireless keyboard/mouse set
which share one USB wireless receiver connector for this HID function supporting.
3. Click “Install” to start installation
2. Choose your language and click “OK”,
enter the following installation interface,
click “Next” to enter the next step.
KRO
OED
IV
WTEN
STICK
Laptop
Wireless Keyboard/Mouse
USB wireless receiver
Application of HID Function
1. Please make sure that both of the transmitter and receiver can support HID function.
2. Connect the Transmitter with PC's HDMI port. (CB8808 should be connected with the
VGA port through the VGA adaptor)
(Please refer to the installation step of Laptop connecting on P10 to P12.）
3. Connect the Transmitter with PC's USB port by the USB cable.
4. At this time, the PC screen will be prompted to install HID driver . As to the operation
step, please refer to the latter part of this chapter.
5. Connect Receiver to HDTV/Projector by HDMI cable, power on HDTV and receiver.
6. Wait for 15 to 25 seconds, the network and video indicators of receiver will be turn
on, TV screen will display video source content of PC/Laptop..
7. Connect the USB wireless receiver connector of wireless keyboard/mouse set or wired
Mouse/keyboard with Mini USB In port of receiver .
8. After HID driver installed, the wired/wireless keyboard/mouse will be available to use
to remote control the PC/Laptop from monitor's side.
23
4. Since the driver is not certified by
Microsoft, so the following dialog
box may pop up several times during
installation process, please click
“Continue Anyway” to install.
5. Click “Finish” to complete the
installation.
24
3D Video Transmission
* Product model suffix with a "D" means supporting 3D video transmission function.
Supported model: CV6620D, CV6608D, CB8801D, CB3801D,CB2601D
Function Instruction
3D Video Transmission requires transmitter and receiver's hardware supporting of
wireless transmission for 3D audio and video signal.
Function Application
1.Please make sure that both of the transmitter and receiver with the Model No. can
support 3D video transmission function.
2. Please make sure both of the player and monitor can support 3D video.
5. Power on Player, Transmitter, TV and receiver
6. The network indicator of receiver will turn on in 15~25secs and 3D image will
be displayed in TV.
Transmitter
3D Player
3D Player
Transmitter
Receiver
3D TV
3. Connect the transmitter with the player by HDMI cable.
3D TV
IR OUT
HDMI cable
HDMI
Receiver
HDMI IN
HDMI OUT
Note: The optional function of WHDI, HID, 3D can be combined with one another.
E.g. CV6608WD, CB8801WHD, CB8808WH, CB2601WHD, CV6620WHD.
HDMI
POWER
Power supply
Player
Transmitter
IR remote
extension connector
4. Connect the receiver with the TV by HDMI cable.
HDMI
H DMI OU T
HDMI IN
USB
HDMI cable
IMDH
POWER
3D TV
25
Power supply
Receiver
Remote Control
26
Graphic Card Setting
Appendix
Windows 7 System
OSD (On Screen Display)
RX:1.5.44
TX:1.5.44
1920*1080 Freq:5230
NETWORK CONNECTED. VIDEO CONNECTED.
1. Receiver software version number;
2. Current video resolution;
3. Network connection status indicator:
Network Connecting: Being in the process of network connecting;
Network Connected: Network connection is successful.
4. Transmitter software version number;
Only display when network connected and won't
display when the network is not connected or
disconnected from the network.
5. Working frequency:
current wireless network frequency band
6. Video connection status indicator:
Video Connecting: Being in the process of video connecting;
Video Connected: Video connection is successful.
Only display when network connected and won't
display when the network is not connected or
disconnected from the network.
OSD will hide automatically after 3 seconds under the circumstances the video connection is successful.
List of Supported HID Wireless Keyboard/Mouse Model
Device Name
Device Type
Result
RAPOO 1800E
Mouse+Keyboard
OK
Lenovo KM4901
27
1. When the device is properly connected and the network has been connected, OSD
information on display device screen will be prompted as:
" NETWORK CONNECTED, VIDEO CONNECTING... ";
2. Right-click on the desktop and select "Screen resolution";
3. As the below picture shows, there will be two monitors named ①② in panel. If only
monitor ① appeared, please click "Detect" or unplug and then plug PC's HDMI cable;
Mouse+Keyboard
OK
Fuhlen U79 2.4G
Mouse+Keyboard
OK
HP VK429PA#AB2
Mouse+Keyboard
OK
Lenovo N5901A
Mouse+Keyboard
OK
Lenovo Ultraslim Plus Wireless KM
Mouse+Keyboard
OK
PRIMAX Black Silk USB KB T1
Mouse+Keyboard
OK
Logitech MK250
Mouse+Keyboard
OK
Logitech MK260
Mouse+Keyboard
OK
Logitech M-BT96a
Mouse
OK
Logitech M-BJ58
Mouse
OK
A4TECH OP-220
Mouse
OK
Microsoft Wired Desktop 600
Mouse
OK
BETOP BTP-C033
Game Controller
OK
Logitech Gamepad F310
Game Controller
OK
BETOP BTP-C036
Game Controller
OK
Saitek CYBORY F.L.Y 5
Game Controller
OK
4. Select "Duplicate these displays" or "Extend these displays" in "Multiple displays"
column, click "Apply";
5. When computer screen shown on the display device, click "Keep Changes" to complete
the setup. Click "Resolution" option to change computer's output resolution. If you
can't set the resolution of 1080P under "Duplicate these displays", please change to
"Extend these displays".
Windows XP System (NVIDIA Graphic Card Series)
1.When the device is properly connected and the network has been connected, OSD
information on display device screen will be prompted as:
" NETWORK CONNECTED, VIDEO CONNECTING... ";
2.Right-click on the desktop and select "NVIDIA Control Panel";
3.Open the "NVIDIA Control Panel", select "Set up multiple displays", it will show
the following interface:
28
4. Select "The same on both displays (Clone) " or "Configured independently from each
other (Dualview) ", click "Apply";
5. When computer screen shown on the display device, click "Yes" to save the setting.
6. As below picture show, select the "Change resolution" option, you can modify the
computer output resolution as dragging the "Display Resolution" progress bar.
7. Open the Control Panel, run the "Sounds and Audio Devices" as follows: Click the
"Audio" tab in the "Sounds and Audio Devices" properties card, change the "Default
device" of "Sound playback" to "NVIDIA High Definition Audio", then click "OK" to
complete the setup.
*8. This step is for HDMI audio output settings, you can skip this step if you are using VGA
interface of HD transmitter.
Windows XP System (ATI Graphic Card Series)
1. When the device is properly connected and the network has been connected, OSD
information on display device screen will be prompted as:
" NETWORK CONNECTED, VIDEO CONNECTING... ";
2. Right-click the mouse on the desktop, select "Catalyst( TM ) Control Center", open the
ATI graphics settings;
3. Select "Displays Manager" which listed in the graphics settings as refer to follow picture:
4 .Below “Attached displays currently disabled”, there will be a gray display in the display
box, if no gray display appear, please right-click "Detect Displays" or unplug and then
plug the HDMI cable;
5. Right-click the gray display, select the "Extended Main onto HDTV" or "Clone Main
with HDTV";
6. When the video image appears on the display screen, select "Yes" on the pop-up dialog
box to save the settings;
7. Click the "Desktop Area" option, change the computer's output resolution;
8. Open the computer control panel, run the "Sounds and Audio Devices";
*9. This step is for HDMI audio output settings, you can skip this step if you are using VGA
interface of HD transmitter. Click the "Audio" tab in the "Sounds and Audio Devices
" properties card, change the "Default device" of "Sound playback" to "ATI HD Audio
rear output", then click "OK" to complete the setup.
29
30
Indicator Description
Model
Indicator
Indicator Status
ON
Network
Indicator
Windows XP System (INTEL Graphic Card Series)
TX:CV6608
1. Right-click the mouse on the desktop, select "Graphics Properties ..";
2. Select "Multiple Displays" in "Intel Graphics and Media Control Panel", change "
Operating Mode" to "Clone Displays" or "Extended Desktop";
in the wireless mode
OFF
— The transmitter fails to be connected in the
Flash Rapidly
— The device is abnormal
wireless mode
Video
ON
— The video source is connected successfully
Indicator
OFF
— The video source fails to be connected
ON
Network
Indicator
RX:CV6620
— The receive fails to be connected in the
Flash Rapidly
— The device is abnormal
wireless mode
Video
ON
— The display device is connected successfully
OFF
— The display device fails to be connected
Indicator
in the wireless mode
OFF
— The transmitter fails to be connected in the
Flash Rapidly
— The device is abnormal
wireless mode
Video
ON
— The video source is connected successfully
OFF
— The video source fails to be connected
H1 ON
— HDMI input is selected currently.
Video Input
Indicator
Network
Indicator
Video
31
— The transmitter is connected successfully
Indicator
TX:CB2601
TX:CB8808
in the wireless mode
OFF
ON
TX:CB8801
— The receiver is connected successfully
Indicator
Network
3. Click "Apply" and select "Yes" on the pop-up dialog box to save the settings;
4. Click the "Resolution" option in the "General Settings" tab, change the output
resolution;
Working Status
— The transmitter is connected successfully
Indicator
V1OFF
H1 OFF
—————
—————
V1 ON
— VGA input is selected currently.
ON
— The wireless network connection is
Flash Slowly
— Transmitter is ready for connecting.
Flash Rapidly
— The device is abnormal.
successful between transmitter and receiver.
ON
— The display source is connected successfully
OFF
— The display source fails to be connected
32
Product Specifications
Indicator
Indicator Status
ON
Network
Indicator
Video
Working Status
successful between transmitter and receiver.
Flash Slowly
— Receiver is ready for connecting.
Flash Rapidly
— The device is faulty.
ON
— The video source is connected successfully
Indicator
OFF
CV6608
— The wireless network connection is
— The video source fails to be connected
Tramsmitter
Model
CB8801
CB8808
5.15~5.25, 5.25~5.35, 5.47~5.725, 5.725~5.850 (GHz)
Frequency Stability
Bandwidth
±10PPM
Up to 40MHz
Standard Protocol
HDMI 1.3，HDCP 1.2
≤- 75dBm
≤- 75dBm
≤- 75dBm
System Latency
≤1ms
≤1ms
≤1ms
≤1ms
TX/RX channel
4 TX / 1RX
2 TX / 1RX
2 TX / 1RX
4 TX / 1RX
Transmission Power
13 ±2dBm
13±2dBm
10 ±2dBm
12 ±2dBm
Transmission Distance
≥30m
≥25m
≥25m
≥30m
5V /2A
5V /1A
5V /1A
5V /2A
Dimensions (W x D x H)
148 x 97 x 18 (mm) 98 x 29 x 14.5 (mm) 91.5 x 31x 17.5 (mm) 160 x 95 x 25 (mm)
CV6620
Transmission Frequency
Receiver
≤- 75dBm
Receiving Sensitivity
Power Supply
(OPTIONAL)
CB2601
Transmission Frequency
CB3801
5.15~5.25, 5.25~5.35, 5.47~5.725, 5.725~5.850 (GHz)
RF communication system
MIMO
Modulation mode
OFDM
Frequency stability
±10PPM
Bandwidth
Up to 40MHz
Standard Protocol
HDMI 1.3，HDCP 1.2
Transmission Power
18 ±2dBm
16 ±2dBm
Receiving Sensitivity
≤- 65dBm
≤- 75dBm
System latency
≤1ms
≤1ms
TX/RX channel
5 RX /1T X
5 RX /1T X
Transmission Distance
≥30m
≥30m (≥50m with CB8801)
Power Supply
5V /2A
5V /2A
Dimensions (W x D x H)
148 x 97 x 18 (mm)
99 x 56 x 20. 5 ( mm)
Video Format
Support
T V:1080p, 1080i, 720p, 576p, 480p
PC:VGA(640X480), SVGA(800X600),
XGA:(1024X768), SXGA(1280X1024)
Audio Format Support
PCM, DTS, DOCBY DIGITAL
IR Mode
38KHz
3D Video
Format Support
720P@50, 720P@59, 720P@60
1080P@23, 1080P@24
3D Standard Protocol
HDMI 1.4, HDCP 2.0
Operating Temperature
-10 - 40℃
Storage Temperature
-20℃ - 80℃
Operating Humidity
15~85%RH
* Since the product's improving process, all the performance, design and specifications of our
products are subject to minor change without prior notice.
33
34
Trouble Shooting
Possible Reasons:
Solutions:
Power on transmitter.
Transmitter or receiver is not placed erectly.
Place the TX or RX onto the base and maintain them erectly.
Transmitter or receiver is not placed erectly.
Place the TX or RX onto the base and replace them erectly.
The transmitter and receiver are out of effect range.
Move the receiver closer to the transmitter.
The transmitter and receiver are too far away.
Move the receiver closer to the transmitter.
Several solid wall partition TX and RX.
Reduce the number of solid walls between TX and RX.
Several solid wall partition TX and RX.
Reduce the number of solid walls between TX and RX.
There are too many obstacles between TX and RX.
Move the receiver closer to the transmitter.
There are too many obstacles between TX and RX.
Move the receiver closer to the transmitter.
Images appear on TV normally but no voice is output.
Haven't matched the code of TX and RX.
Rematch the code of transmitter and receiver.
Player or TV is muted.
Open the volume of player or TV.
There is other transmitter which is under working
Power off other independent transmitter, place the
Player or TV's volume is too low.
Turn up the volume of player or TV.
condition near the receiver.
Audio
Image
Transmitter is not electrified.
Current player don't support the output audio format. Switch the output audio format of player.
receiver away from the other sources of interference.
Video connect failed,Please check the device is ready
Abnormal working of transmitter or receiver
Transmitter and player are not connected.
Connect the transmitter with player by the HDMI cable
Can't use the IR extended function to remote control the player.
Player is not turned on.
Power on player.
Haven't switched player to HDMI output.
Switch player to HDMI output.
Poor contact of transmitter's HDMI cable
Unplug and then plug the HDMI cable of the transmitter
Abnormal working of transmitter
Reboot the transmitter.
There are problems with HDMI cable between TX and player. Change the HDMI cable.
Player don't support the output resolution format.
Switch the player's output resolution to other modes.
The TV don't support HDCP authentication when using Blue-ray player.
Replaced with HDCP-certified TV.
extension connector.
IR remote extension connector is misalignment to the
IR sensor window of player.
transmitter, place the IR remote extension
connector in front of IR windows area of player.
Place the IR remote extension connector in the front
of player and make sure the IR remote extension
connector is aligned to the IR sensor window of player.
The remote control is not aligned to the IR sensor
Make sure the remote control is aligned to the IR
sensor window of receiver when using.
Power on receiver.
A few special type of players do not support infrared
IR remote extension connector only supports 38KHz
Receiver and TV are not connected.
Connect the receiver and TV by the HDMI cable.
remote control.
remote's signal protocol.
Haven't switched TV to HDMI input.
Switch TV to HDMI input.
Can't use HID remote control function
Poor contact of receiver or TV's HDMI cable
Unplug and then plug the HDMI cable of the receiver or TV.
Haven't installed the HID driver.
Please refer to the HID driver's installation step in P24.
TV turn into standby mode
Switch the TV to normal operation mode.
Transmitter's USB port is not connected with the
Make sure the transmitter's USB port is connected
Abnormal working of receiver.
Reboot the receiver.
computer's USB port.
with the computer's USB port.
The adopted keyboard/mouse are not supported.
Refer to the List of Supported HID Accessories Model in P27.
No image appear on TV
HID Function
window of receiver when using.
Receiver is not turned on.
The keyboard/Mouse's operation progress is not continuous.
Poor contact of receiver or TV's HDMI cable.
Re-plug the HDMI cable of the receiver or TV
Abnormal working of receiver
Reboot the receiver
The transmitter and receiver are too far away.
Move the receiver closer to the transmitter.
Receiver failure
Please contact your distributor
Abnormal working of transmitter or receiver
Reboot the transmitter and receiver.
Abnormal color on TV screen
Poor contact of receiver or TV's HDMI cable.
Unplug and then plug the HDMI cable of the receiver or TV.
Poor contact of transmitter or player's HDMI cable.
Unplug and then plug the HDMI cable of the TX and player.
Abnormal working of transmitter or receiver
Reboot the transmitter and receiver.
Transmitter
Image
Reboot the transmitter and receiver.
Plug the IR extension cable into the IR Out jack of
The transmitter are not connected with the IR remote
No signals are input to TV
35
Solutions:
Many noises or mosaics on the image displayed on TV
IR Remote Control
OSD Information on TV
Possible Reasons:
Network connect failed, Please check the device is ready
Indicator status of wireless connection is off.
Receiver is not electrified.
Power on receiver.
Transmitter or receiver are not placed erectly.
Place the machine onto the base and maintain them erectly.
The TX and RX are too far away from each other.
Move the receiver closer to the transmitter.
36
Possible Reasons:
Solutions:
Several solid walls partition transmitter and receiver.
Reduce the number of solid walls between TX and RX.
There are too many obstacles between TX and RX.
Move the receiver closer to the transmitter.
Haven't matched the code of TX and RX.
Rematch the code of transmitter and receiver.
Transmitter or receiver failure
Please contact your distributor.
Transmitter
Indicator status of wireless connection is on, but video Indicator is off.
Receiver and TV are not connected.
Connect the transmitter with player by the HDMI cable.
Player is not turned on.
Power on player.
Haven't switched player to HDMI output.
Switch player to HDMI output.
Poor contact of transmitter or player's HDMI cable.
Unplug and then plug the HDMI cable of the TX or player.
There are problems with HDMI cable between TX
and player.
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
Change the HDMI cable
interference by one or more of the following measures:-Reorient or relocate the receiving
Indicator status of wireless connection is flash rapidly.
antenna. Increase the separation between the equipment and receiver. Connect the
Abnormal working of transmitter
Reboot the transmitter.
equipment into an outlet on a circuit different from that to which the receiver is connected.
Transmitter failure
Please contact your distributor.
Indicator status of wireless connection is off.
Please refer to OSD information: Network connect failed, please check the device is ready.
Receiver
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital
Indicator status of wireless connection is on, but video indicator is off.
Please refer to OSD information: video connect failed, Please check the device is ready
Consult the dealer or an experienced radio/TV technician for help. To assure continued
compliance, any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment. (Example use only
shielded interface cables when connecting to computer or peripheral devices).
Indicator status of wireless connection is flash rapidly.
Abnormal working of receiver.
Reboot the receiver.
Receiver failure
Please contact your distributor.
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter. This equipment complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, includinginterference that may cause
undesired operation.
Cautions!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modificationscould void the user authority to operate
the equipment.
37
38

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2012:04:26 19:44:52+08:00
Modify Date                     : 2012:04:26 19:50:30+08:00
Metadata Date                   : 2012:04:26 19:50:30+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Document ID                     : uuid:3FB25737958FE111AFC9D20F1ED68529
Instance ID                     : uuid:b1c9dc3b-b065-41fb-9ed7-11e45df10012
Derived From Instance ID        : uuid:4300d290-cd68-4ee8-a189-905135b14fff
Derived From Document ID        : uuid:7ad13933-0c42-4fbf-8903-cc6e0395c022
Format                          : application/pdf
Creator                         : Administrator
Title                           : 鑻辨枃璇存槑涔?2-13.cdr
Page Count                      : 21
Author                          : Administrator

EXIF Metadata provided by EXIF.tools