Cuisinart Blender Blend And Cook Soupmaker Users Manual SBC1000 IB 10066B(LOW)[1]

SBC-1000 sbc-1000

SBC1000 to the manual b5df196b-8bf2-4dd2-b020-34c37e51cebb

2015-02-04

: Cuisinart Cuisinart-Cuisinart-Blender-Blend-And-Cook-Soupmaker-Users-Manual-365492 cuisinart-cuisinart-blender-blend-and-cook-soupmaker-users-manual-365492 cuisinart pdf

Open the PDF directly: View PDF .
Page Count: 10

Download
Open PDF In Browser	View PDF

INSTRUCTION
BOOKLET
Recipe
Booklet
Reverse Side

Blend and Cook Soupmaker

SBC-1000

For your safety and continued enjoyment of this product, always read the instruction book carefully before using.

17. Regarding your cord set: A longer cord has been
provided so that you will have flexibility in positioning
your blender. Exercise care when using the longer
cord to avoid entangling or tripping over the cord.
The longer cord should be arranged so that it will
not drape over the counter or tabletop, where it can
be pulled on by children or tripped over.
18. Wash the blender jar, jar collar with black assembly,
lid and measuring cup before first use.
19. WARNING: TO REDUCE THE RISK OF ELECTRICAL
SHOCK OR FIRE, DO NOT REMOVE THE BASE
PANEL. NO USER-SERVICEABLE PARTS ARE
INSIDE. REPAIR SHOULD BE DONE ONLY BY
AUTHORIZED PERSONNEL.
20. WARNING: FLASHING LIGHT INDICATES READY
TO OPERATE. DO NOT TOUCH BLADES.
21. Ensure all packaging materials and any promotional
labels or stickers are removed from the Cuisinart®
Blend and Cook Soupmaker before first use.
22. Always inspect the appliance before use for noticeable signs of damage. Do not use if damaged or if
the appliance has been dropped. In the event of
damage, or if the appliance develops a fault, contact
Cuisinart Customer Service.
23. While unit is in use, the surfaces will become
extremely hot. Do not touch hot surfaces.
Always use handles. Heating plate and complete
jar collar assembly become very hot.
24. For domestic use only.
25. This appliance should be used only for preparation
of drinks / food as described within the instructions
for use that accompany it. Please retain these
instructions for future reference.
26. Always ensure that your hands are dry before removing the plug from the outlet. Never pull the plug out
of the outlet by the cord.
27. Do not connect this appliance to an external timer
or remote control system.
28. Extreme caution must be used when moving an
appliance containing hot oil or other hot liquids.
29. Do not place on or near a hot gas or electric burner
or in a heated oven.
30. To disconnect, turn any control to off, then remove
plug from wall outlet.
31. Do not use appliance for other than intended use.
32. Do not submerge the jar collar with blade assembly
in water or place in dishwasher.
33. When blending hot liquids ensure vents in lid
opening are clear and intended pour spouts are
closed (lid is secured).

IMPORTANT SAFEGUARDS
When using an electrical appliance, basic safety
precautions should always be followed, including the
following:
1. READ ALL INSTRUCTIONS BEFORE USING.
2. To protect against the risk of electrical shock, do not
put motor base of blender in water or other liquids.
3. Close supervision is necessary when any appliance
is used by or near children.
4. Unplug from outlet when not in use, before putting
on or taking off parts, and before cleaning or
removing contents from blender jar. Never put
hands into the blender jar or handle the blades
with appliance plugged in.
5. Avoid contact with moving parts.
6. Do not operate any appliance with a damaged cord
or plug, or after the appliance malfunctions or is
dropped or damaged in any manner. Return
appliance to nearest Cuisinart service facility for
examination, repair, and/or mechanical or electrical
adjustment.
7. The use of attachments, including canning or
ordinary jars, not recommended or sold by Cuisinart
may cause fire, electrical shock, or risk of injury to
persons.
8. Do not use outdoors.
9. Do not let cord hang over edge of counter or table
or touch hot surfaces.
10. Keep hands and utensils out of jar while
blending, to reduce the risk of severe injury to
persons or damage to blender itself. A plastic or
wooden spatula may be used but must be used only
when the blender is turned off.
11. When blender is plugged in and ON/OFF button is
flashing, do not touch cutting assembly, interfere
with blade movement, or remove blender jar cover.
Accidentally touching a speed button may activate
the blender.
12. BLADES ARE SHARP. HANDLE CAREFULLY.
13. To reduce the risk of injury, never place cutting
assembly on base unless the blender jar is properly
attached.
14. Always operate blender with the lid in place.
15. Never leave your blender unattended while it is
running.
16. Twist locking ring on firmly. Injury can result if moving
blades accidentally become exposed.

SAVE THESE INSTRUCTIONS UNPACKING INSTRUCTIONS
Place the gift box containing your Cuisinart
FOR HOUSEHOLD USE ONLY 1. blender
on a flat, sturdy surface before unpacking.
®

2. Remove instruction booklet and other printed
materials from the top of corrugated insert.
Next remove the top corrugated insert.

SPECIAL CORD SET
INSTRUCTIONS
NOTICE

3. Carefully lift blender base from box and set aside.

For your protection, this unit is equipped with a
3-conductor cord set that has a molded 3-prong
grounding-type plug, and should be used in combination with a properly connected grounding-type outlet
as shown in Figure A.

To assemble the blender, follow the Assembly
Instructions on page 4 in this instruction booklet.
Replace all corrugated inserts in the box and save the
box for repackaging.

1. A short power supply cord (or detachable power supply cord) is to be provided to reduce risks resulting from
becoming entangled in or tripping over a longer cord.

Before using for the first time: Wash all parts
according to the Cleaning and Maintenance section on
page 6 of this booklet to remove any dust or residue.

2. Longer detachable power supply cords or extension
cords are available and may be used if care is exercised in their use.

TABLE OF CONTENTS

4. Carefully remove lower corrugated insert
containing the blender jar assembly. Be careful not
to tip the jar when moving.

Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . .
Unpacking Instructions . . . . . . . . . . . . . . . . . . . . . . . .
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . .
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Helpful Reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Getting to Know Your Control Panel . . . . . . . . . . . . .
Cooking and Blending . . . . . . . . . . . . . . . . . . . . . . . . .
Blending Cold Ingredients . . . . . . . . . . . . . . . . . . . . . .
Cleaning and Maintenance . . . . . . . . . . . . . . . . . . . . .
DOs and DON’Ts . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . .

3. If a long detachable power supply cord or extension
cord is used:
a) The marked electrical rating of the detachable
power supply cord or extension cord should be
at least as great as the electrical rating of the
appliance;
b) If the appliance is of the grounded type, the extension cord should be a grounded type 3-wire cord;
and
c) The longer cord should be arranged so that it will
not drape over the counter top or table top where
it can be pulled on by children or tripped over.
NOTE: Do not remove the grounding prong.
CAUTION: Before using an adapter, it must be
determined that the outlet cover plate screw is
properly grounded. If in doubt,
consult a licensed electrician.
Never use an adapter unless
you are sure it is properly
grounded.
Figure A
Note: Use of an adapter is not
permitted in Canada.

1
2
3
4
4
5
6
6
6
7
8

FEATURES AND BENEFITS

12. Heavy-Duty Cleaning Brush
to help clean heating plate and blades thoroughly.

1. Press-on Lid
Tightfitting seal resists leakage and vents
in lid opening allow steam to escape.

13. BPA-Free (not shown)
All parts that come in contact with food
are BPA-free.

2. Lid Opening
Allows you to add ingredients when
measuring cup is removed from lid.

3.
2.

3. Removable Measuring Cup
Allows you to measure up to 3 ounces of
ingredients to add through the lid opening.
4. Thermal Shock-Resistant Glass
Blending/Cooking Jar
Has a unique, sturdy, wide-mouth design.
Holds 48 oz. of hot liquids and 56 oz. of cold.
Hot and cold markings are on the jar.
5. Leak-Proof Rubber Gasket (not shown)
Holds the glass jar snugly in position
for safe operation.

6. Jar Collar with Heating Plate
and Blade Assembly
7.

Easy-Clean Non Stick Heating Plate
(not shown) Lets you sauté, simmer, boil and
reheat right in blender.

8. High-Quality Cutting Assembly with
Stainless Steel Blades (not shown)
Is strong enough for all blending tasks,
including tough jobs like crushing ice.

9. Electronic Touchpad Controls
a. On/Off Button
Turns blender on or off.
b. Blending Control
Choose desired speed 1 to 4 or pulse
to blend ingredients to the desired
consistency. Use speeds 1 through 3
for blending hot ingredients.

9a.

9b.

9c.

c. Stir Button
Gently stirs ingredients as they cook.

d. Countdown Timer Control
Select up to 30 minutes in 1-minute
increments. Must be used to operate
the temperature controls.

9e.

e. Temperature Control
High, Medium and Low settings.
Must be used to activate heating.

10.
11.

10. Heavy-Duty Motor Base
11. Slip-Proof Feet
Prevent movement during use and prevent
damaging marks on countertops or tables.

9d.

12.

Note: Blades are sharp. Handle carefully.
CAUTION: Collar assembly is hot when making soup.
Handle very carefully.

ASSEMBLY

Fig. 1

e.
®

To use your Cuisinart
Blend and Cook Soupmaker, begin
by assembling the blender jar.
1. Place jar collar with blade
assembly (a) on a flat, sturdy
surface.

2. Carefully place the rubber gasket
(b) inside the jar collar.
3. Place the blender jar (c) on the
collar and turn clockwise until
tight.

Fig. 2
c.

Note: Blades are sharp. Handle
carefully.
4. Place lid (d) on jar and push until
secure. Place measuring cup (e) in
the lid opening and press into lid.
5. When placing jar onto base, be
sure arrow on jar collar, located
just below the handle, is aligned
with arrow on base (Fig. 1). Place
jar onto base, making sure the 3
interlocking pins on the underside
of the collar (Fig. 2) fit into the
rectangular rubber connector on
the base (Fig. 3).
NOTE: If jar does not sit flush on
base, do not force it! Remove jar and
slightly turn the clutch (Fig. 4), located
in the center of the top of the base.
CAUTION: Do not adjust jar collar
clutch after cooking, as it may be hot.

Fig. 3

b.
Fig. 4

HELPFUL REMINDERS
r

ODFUIFDPWFSJTJOQPTJUJPO
BEEJUJPOBM
0
ingredients can be added during blending by
simply lifting the measuring cup, adding ingredients through lid opening, and replacing the measuring cup.

r C
AUTION: Be sure lid is on and measuring cup
is in lid opening when blending hot liquids.
r

Lid should always be in place while the unit is on.

CAUTION: Collar is hot when making soup.
Handle carefully.

r K
eep hands away from the underside of collar.
The surface will also be very hot.
4

AUTION: Do not place blender jar on base while
C
motor is running.

POPUUXJTUCMFOEFSDPMMBSGSPNCMFOEFSKBSXIFO
%
removing blender jar from base. Simply lift blender
jar from motor base.

AUTION: Do not put your hand on top of
C
blender while blending. Hot steam can come
through vents.

PMMPX$MFBOJOHBOE.BJOUFOBODFJOTUSVDUJPOT
'
(page 6), prior to your first use.

GETTING TO KNOW YOUR CONTROL PANEL

1. Power On/Off Button – Press
the button to turn on. The red
LED light will flash; the unit is
now in Standby mode. If the
On/Off button is pressed while
in Standby mode, the unit will
turn off.

in one-minute increments,
up to 30 minutes. (Note: If –
button is pressed first, 30
minutes will be displayed.)
Hold button down to scroll
through minutes, or press
and release to advance
one minute at a time.

2. Cooking Timer Control –
NOTE: Timer must be set before 3. Temperature Controls –
NOTE: Cooking time must
temperature can be set. When
be selected before setting
the unit is in Standby mode, the
temperature. The unit will start
cooking time can be set by
its heating or cooking cycle
pressing the + or – buttons.
when High, Medium or Low
Time counts up or down

temperature is selected. The
temperature can be changed
at any time during the heating
or cooking cycle. The heater
can be manually turned off
by pressing the Temperature
control currently in use (this
will be illuminated) or pressing
the power On/Off button. If the
power On/Off button is used
to turn off the heater, the unit
will power off and must be
restarted for blending. NOTE:
Blending and cooking cannot
operate simultaneously.
4. Stir Button – The Stir function
does just what it says, allowing
you to stir ingredients at a low
speed. It can be operated at
any time during the cooking
or blending cycle. It can also
be operated in Standby mode
when ingredients are being
added to the glass jar. It is a
manually operated function;
it will stir only when pressed,
giving you complete control.
5. Blending Control – The
Blending control has 4 speeds
– 1 is the lowest setting, 4 is
the highest. When in Standby
mode, the Blending function
is active and operable. NOTE:
Blending and cooking cannot
operate simultaneously. When
blending hot items such as
soups or sauces, only use
speeds 1 through 3; cooking
will be non-operational.
6. Pulse – The Pulse setting
can only be used in Standby
mode. This function creates
a burst of power for quick
blending. Rotate counterclockwise, release Blending
control and repeat as desired.
You determine the duration of
each pulse. The Pulse function
is best for breaking apart larger
pieces of food. NOTE: Pulsing
and cooking cannot operate
simultaneously.

COOKING AND BLENDING
1. Place the motor base of your blender on a flat, sturdy surface. It is important that the surface be clean
and dry. Assemble the blender by following the
Assembly instructions (page 4). Once the jar is
assembled and is in position on the motor base,
plug the blender into an electrical outlet.
2. Press the On/Off button. The blender is now in
Standby mode.
3. Select the required time per the recipe. This can
be adjusted throughout the cooking process, but
a time must be selected to start the heater initially.
4. Add ingredients according to the recipe. You may
add more ingredients by lifting the measuring cup
from the lid and dropping ingredients through the
lid opening. When making soup, fill the contents
of the glass jar only to the 48-oz. level marked HOT.
Always replace the measuring cup after adding
ingredients. See Recipe Tips and Hints for cooking
soups (recipe book, page 2).
CAUTION: Do not put hands into blender jar with
blender plugged in.
NOTE: Do not use anything other than the measuring cup to cover or close lid opening. This prevents
obstruction to necessary steam vents.
CAUTION: When blending hot liquids ensure vents
in lid opening are clear and intended pour spouts
are closed (lid is secured).
5. To remove blender jar lid, lift edge of cover upwards.
Lifting from measuring cup will not remove lid.
CAUTION: Be careful of hot steam when removing lid.
6. To stir ingredients while cooking, use the Stir button.
7. When cooking time has finished, the blender will
beep 4 times.
8. To blend soup always start on speed 1, gradually
increasing to speed 2 or 3. Use only these recommended speeds when blending hot items. Turn the
Blending control dial to stop when the desired consistency is reached.
9. Unplug the blender from the electrical outlet. Never
remove the blender jar from the motor base until the
blender is off. Do not twist the blender collar from
the blender jar when removing jar from motor base.

2.
3.

4.
5.

the Assembly instructions (page 4). Once the jar is
assembled and is in position on the motor base,
plug the blender into an electrical outlet.
Press the On/Off button. The blender is now in
Standby mode.
Add all necessary ingredients to the blender jar and
replace the cover. You may add more ingredients by
lifting the measuring cup and dropping ingredients
through the lid opening. Replace the measuring cup
after adding ingredients. Do not put hands into
blender jar with blender plugged in.
NOTE: Add liquid ingredients first then follow with
solid ingredients. This will provide more consistent
blending and prevent unnecessary stress on the
motor.
To remove blender jar lid, lift the edge of lid upwards.
Lifting from measuring cup will not remove lid.
Turn the Blending control dial to your desired speed
or use the Pulse function. Turn the Blending control
dial to Stop when the desired consistency is
reached.
The Stir function can be used as well for gentle
blending.
NOTE: To dislodge food, do not use a spatula
until you have turned the blender off, use a plastic
or wooden spatula to help remove food lodged
around the cutting assembly. Replace the lid and
measuring cup and continue blending, if necessary.
Make sure the spatula is not inside the blender jar
before blending.
Unplug the blender from the electrical outlet. Never
remove the blender jar from the motor base until the
blender is off. Do not twist the blender collar from
the blender jar when removing jar from motor base.

CLEANING AND MAINTENANCE
NOTE: Jar collar with blade assembly is NOT dishwasher
safe. Do not submerge in water or other liquids.
CAUTION: Be extremely careful when cleaning
around the blades. They are very sharp.
Always unplug your Cuisinart® Blend and Cook
Soupmaker from the electrical outlet before cleaning.
The blender is made of corrosion-resistant parts that are
easy to clean. Before first use and after every use, clean
each part thoroughly. Periodically check all parts before
reassembly. If any part is damaged or blender
jar is chipped or cracked, DO NOT USE BLENDER.
Remove the blender jar from the motor base by lifting
straight up and away. Twist off the jar collar with blade
assembly by turning counterclockwise. Carefully remove
the rubber gasket.

CAUTION: When removing the jar use caution.
The area underneath the collar may be
extremely hot.

BLENDING COLD INGREDIENTS
1. Place the motor base of your blender on a flat,
sturdy surface. It is important that the surface be
clean and dry. Assemble the blender by following
6

CAUTION: When removing the jar use caution. The
area underneath the collar may be extremely hot.
Place the blender jar, lid, rubber gasket and measuring
cup in the upper rack of the dishwasher or wash in
warm, soapy water; rinse and dry thoroughly.
To thoroughly clean the heating plate, we recommend
that you use the cleaning brush that is included with
your blender. Be sure to let the heating plate cool before
cleaning with the cleaning brush, as the brush is not
heatproof.
NOTE: Do not clean the heating plate with any abrasive
tools so as not to scrape the easy-clean coating.
TIP: To wash jar assembly, add a drop of dishwashing
liquid and 8 ounces of warm water. Run on speed 1 for
30 to 60 seconds. Repeat, using clean tap water. Do not
use heat controls when cleaning. Empty blender jar and
carefully disassemble jar from the collar with blade
assembly. Rinse and dry all parts thoroughly or allow to
air dry.
CAUTION: Handle the cutting assembly carefully.
It is SHARP and may cause injury. Do not attempt
to remove blades from cutting assembly.
Finally, wipe the motor base clean with a damp cloth
to remove any residue, and dry thoroughly. Never
submerge the motor base in water or other liquids,
or place in a dishwasher. Any other servicing should
be performed by an authorized service representative.

6TFBQMBTUJDPSXPPEFOTQBUVMBBTOFFEFE
POMZ
when the blender is turned off. Never use metal
utensils, as damage may occur to the blender jar,
heating plate or cutting assembly.

MBDFMJEPOGJSNMZ"MXBZTPQFSBUFUIFCMFOEFSXJUI
1
the lid on.

BLFTVSFKBSDPMMBSXJUICMBEFBTTFNCMZJTUJHIUMZ
.
attached to blender jar.

r "
MXBZTSFNPWFDPMMBSXJUICMBEFBTTFNCMZBOE
rubber gasket before cleaning. Make sure unit has
cooled.
r '
PSCFTUSFTVMUTXIFOCMFOEJOH
TDSBQFEPXO
sides of the blender jar occasionally.
r 1
VMTFTTIPVMECFTIPSUCVSTUT4QBDFUIFQVMTFT
so the blades stop rotating between pulses.
r %
VSJOHUIFTBVUÊJOHQSPDFTT
TUJSGSFRVFOUMZ
to ensure even cooking.

DON’T:
r

%POUTUPSFGPPEPSMJRVJETJOZPVSCMFOEFSKBS

POUQMBDFKBSDPMMBSXJUICMBEFBTTFNCMZPO
%
motor base without the blender jar attached.

%POUBUUFNQUUPNBTIQPUBUPFT
LOFBEIFBWZ
dough, or beat egg whites.

POUSFNPWFCMFOEFSKBSXIJMFVOJUJTPO,FFQUIF
%
blender jar cover on the blender jar while blending.

POUUXJTUKBSDPMMBSXJUICMBEFBTTFNCMZGSPN
%
blender jar when removing blender jar from motor
base. Simply lift blender jar from motor base.

POUPWFSQSPDFTTGPPET#MFOEFSXJMMBDIJFWF
%
most desired results in seconds, not minutes.

.BLFTVSFUIFFMFDUSJDBMPVUMFUJTSBUFEBUUIFTBNF
voltage as that stated on the bottom of the blender
motor base.

POUPWFSMPBECMFOEFS*GUIFNPUPSTUBMMT
UVSOUIF
%
blender off immediately, unplug the unit and
remove a portion of the food, then continue.

"MXBZTVTFUIFCMFOEFSPOBDMFBO
TUVSEZBOEESZ
surface.

POUVTFBOZVUFOTJMJOTJEFUIFCMFOEFSKBSXIJMF
%
the motor is on.

8IFOCMFOEJOHBMXBZTBEEMJRVJEJOHSFEJFOUTUPUIF
blender jar first, then add remaining ingredients.
This will ensure that ingredients are uniformly
mixed.

%POUVTFBOZDPOUBJOFSPSBDDFTTPSJFTOPU
recommended by Cuisinart. Doing so may result
in injury.

POUQVUIBOETJOTJEFUIFCMFOEFSKBSXIFO
%
blender is plugged in.

%POUSVOCMFOEFSXIFOKBSJTFNQUZ

%POUMFBWFVOBUUFOEFEXJUIUIFIFBUFSPO

POUGJMMKBSQBTUUIF)05NBSLJOH P[
XIFO
%
cooking in the blender.

POUUPVDIVOEFSUIFDPMMBSBTTFNCMZEVSJOHPS
%
immediately after heating or cooking foods. It will
be very hot!

DOs and DON’Ts
WHEN USING YOUR BLEND AND
COOK SOUPMAKER
DO:
r

$VUNPTUGPPETJOUPDVCFTPGBQQSPYJNBUFMZ
inch (1.3 cm) to 1 inch (2.5 cm) to achieve a more
uniform result.
6TFUIFSFNPWBCMFNFBTVSJOHDVQUPNFBTVSFVQ
to 3 ounces of liquid ingredients. Replace measuring cup after ingredients have been added.

accessories, replacement parts, or repair service other
than those that have been authorized by Cuisinart. These
warranties do not cover any damage caused by accident,
misuse, shipment, or other than ordinary household use.
These warranties exclude all incidental or consequential
damages. Some states do not allow the exclusion of or
limitation of incidental or consequential damages,
so the foregoing limitation may not apply to you.

WARRANTY
LIMITED THREE-YEAR
WARRANTY
This warranty is available to consumers only. You are a
consumer if you own a Cuisinart® Blend and Cook
Soupmaker that was purchased at retail for personal, family,
or household use. Except as otherwise required under
applicable state law, this warranty is not available to retailers
or other commercial purchasers or owners. We warrant that
your Cuisinart® Blend and Cook Soupmaker will be free of
defects in material or workmanship under normal home use
for three years from the date of original purchase.

CALIFORNIA RESIDENTS ONLY
California law provides that for In-Warranty Service,
California residents have the option of returning a
nonconforming product (A) to the store where it was
purchased or (B) to another retail store that sells Cuisinart
products of the same type. The retail store shall then,
according to its preferences, either repair the product,
refer the consumer to an independent repair facility, replace
the product, or refund the purchase price less the amount
directly attributable to the consumer’s prior usage of the
product. If either of the above two options does not result
in the appropriate relief to the consumer, the consumer
may then take the product to an independent repair facility
if service or repair can be economically accomplished.

We recommend that you visit our website, www.cuisinart.
com for a fast, efficient way to complete your product
registration. However, product registration does not eliminate
the need for the consumer to maintain the original proof of
purchase in order to obtain the warranty benefits. In the event
that you do not have proof of purchase date, the purchase date
for purposes of this warranty will be the date of manufacture.

Cuisinart and not the consumer will be responsible for
the reasonable cost of such service, repair, replacement,
or refund for nonconforming products under warranty.

If your blender should prove to be defective within the
warranty period, we will repair it or, if we think it necessary,
replace it. To obtain warranty service, please call our
Consumer Service Center toll-free at 1-800-726-0190 or
write to: Cuisinart, 7811 North Glen Harbor Blvd., Glendale,
AZ 85307.

California residents may also, at their preference, return
nonconforming products directly to Cuisinart for repair or,
if necessary, replacement by calling our Consumer Service
Center toll-free at 1-800-726-0190. Cuisinart will be
responsible for the cost of the repair, replacement, and
shipping and handling for such nonconforming products
under warranty.

To facilitate the speed and accuracy of your return, please
enclose $10.00 for shipping and handling of the product.
Be sure to include a return address, daytime phone number,
description of the product defect, product serial number
(stamped on bottom of product base), and any other
information pertinent to the product’s return. Please pay
by check or money order. (California residents need only
supply proof of purchase and should call 1-800-726-0190
for shipping instructions).

BEFORE RETURNING YOUR CUISINART PRODUCT
If you are experiencing problems with your Cuisinart
product, we suggest that you call our Consumer Service
Center at 1-800-726-0190 before returning the product for
servicing. Often, our Consumer Service Representatives can
help solve the problem without having the product serviced.
If servicing is needed, a Representative can confirm whether
the product is under warranty and direct you to the nearest
service location.

NOTE: For added protection and secure handling of any
Cuisinart product that is being returned, we recommend
you use a traceable, insured delivery service. Cuisinart
cannot be held responsible for in-transit damage or for
packages that are not delivered to us. Lost and/or damaged
products are not covered under warranty.

Important: If the nonconforming product is to be serviced by
someone other than Cuisinart’s Authorized Service Center,
please remind the servicer to call our Consumer Service
Center at 1-800-726-0190 to ensure that the problem is
properly diagnosed, the product is serviced with the correct
parts, and to ensure that the product is still under warranty.

Your Cuisinart® Blend and Cook Soupmaker has been
manufactured to strict specifications and has been designed
for use with the Cuisinart® Blend and Cook Soupmaker
accessories and replacement parts. These warranties
expressly exclude any defects or damages caused by

11CE113411
Any other trademarks or service marks referred to herein are
the trademarks or service marks of their respective owners.

E IB-10066B

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:30
Instance ID                     : uuid:3f2e3069-2374-6d4e-8ced-9ed85e472b44
Document ID                     : adobe:docid:indd:67e0cd8a-4a69-11e0-9199-a46e9d61f78e
Original Document ID            : adobe:docid:indd:67e0cd8a-4a69-11e0-9199-a46e9d61f78e
Rendition Class                 : proof:pdf
Derived From Instance ID        : 67e0cd89-4a69-11e0-9199-a46e9d61f78e
Derived From Document ID        : adobe:docid:indd:67e0cd88-4a69-11e0-9199-a46e9d61f78e
History Action                  : saved, saved
History Instance ID             : xmp.iid:3BE13DE30B2068118A6D9B52C1FAD7B6, xmp.iid:3CE13DE30B2068118A6D9B52C1FAD7B6
History When                    : 2011:06:01 13:41:14+08:00, 2011:06:01 13:41:14+08:00
History Software Agent          : Adobe InDesign 7.0, Adobe InDesign 7.0
History Changed                 : /;/metadata, /metadata
Create Date                     : 2011:06:02 12:01:47+08:00
Modify Date                     : 2012:01:05 17:59:54-05:00
Metadata Date                   : 2012:01:05 17:59:54-05:00
Creator Tool                    : Adobe InDesign CS5 (7.0)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 10434 bytes, use -b option to extract), (Binary data 3643 bytes, use -b option to extract)
Doc Change Count                : 4
Format                          : application/pdf
Creator                         : chana
Title                           : SBC1000 IB-10066B(LOW)[1].pdf
Producer                        : Acrobat Distiller 9.4.0 (Macintosh)
Trapped                         : False
Has XFA                         : No
Page Count                      : 10
Author                          : chana

EXIF Metadata provided by EXIF.tools

Cuisinart Blender Blend And Cook Soupmaker Users Manual SBC1000 IB 10066B(LOW)[1]

SBC-1000 sbc-1000

SBC1000 to the manual b5df196b-8bf2-4dd2-b020-34c37e51cebb

Navigation menu

Versions of this User Manual:

Views

Navigation