Cyber Acoustics AC-21C AmazonBasics AC Powered 2.1 30W Bluetooth Speakers with Subwoofer User Manual
Cyber Acoustics (HK) Ltd. AmazonBasics AC Powered 2.1 30W Bluetooth Speakers with Subwoofer
User Manual
Master volume control Input selection button Auxiliary input jack Bass volume control AC Powered 2.1 30W Bluetooth Speakers with Subwoofer Product Name ES Product Name FR Model Number English.................................. ��� 3 Español...................................XX Français..................................XX Welcome Guide • English Contents: Before getting started, ensure the package contains the following components: Master volume control Auxiliary input jack Control Pod Back of subwoofer LED Auxiliary input jack Power on / off Headphone output jack Master volume control Bass volume control Source button Aux cable IMPORTANT SAFEGUARDS Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included. When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons including the following: WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOSITURE. TO PREVENT ELECTRICAL SHOCK, MATCH THE WIDE BLADE PLUG TO THE WIDE SLOT AND FULLY INSERT. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product`s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to people. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. See the bottom of the set • Read these Instructions - All the safety and operating instructions should be read before the product is operated. • Keep these Instructions - The safety and operating instructions should be kept for future reference. • Read and Follow all Warnings - All warnings on the appliance and in the operating instructions should be adhered to. • Follow all instructions - All operating and usage instructions should be followed. • Do not use this apparatus near water – The appliance should not be used near water or moisture, for example, in a wet basement or near a swimming pool, and the like. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. • Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. • Protect the power cord from being walked on or pinched, particularly around the plugs, convenience receptacles, and the point where power cord exits from the apparatus. • Only use attachments/accessories specified by the manufacturer. • Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the product. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid tip-over injury. • Unplug the apparatus during lightning storms or when unused for long periods of time. • Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power supply cord or plug is damaged; liquid has been spilled or objects have fallen onto the apparatus; the apparatus has been exposed to rain or moisture; the apparatus does not operate normally or has been dropped. • Please keep the unit in a well-ventilated environment. CAUTION These servicing instructions are to be used by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. WARNING Please refer the information at the bottom of the enclosure exterior for electrical and safety information before installing or operating the apparatus. WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing. Objects filled with liquids, such as vases, shall not be placed on apparatus. WARNING The mains plug is used as disconnect device, the disconnect device shall remain readily operable. • This is a CLASS II apparatus with double insulation, with no protective-earth provided. • Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health arising from uncontrolled waste disposal, recycle the product responsibly to promote sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased from. They can take this product for environmental-safe recycling. • Do not install this equipment in a confined space, such as a book case or similar unit. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table cloths, curtains etc. • No naked flame sources, such as lighted candles, should be placed on the apparatus. • Use of the apparatus in moderate climates. Setting Up and Using Your Speakers • Connect the 3.5mm plug from satellite speakers to the “To Speaker” jack on the back of the subwoofer. • Plug the AC power cord into a wall socket or power strip. (AC Power 120 volts only). • Turn the speakers on by sliding the Power switch on control pod. • Adjust the speakers’ volume by turning the Volume knob on control pod up or down. Bluetooth Connection Master volume control Input selection button Auxiliary input jack Bass volume control First time connection with new devices • Turn on the speakers and the system will go into the Bluetooth pairing mode by default. • Bluetooth LED status light will begin blinking. Search your device’s Bluetooth list for “AmazonBasics Speakers” and tap to connect / pair. • After successful connection, a tone will sound, and the Bluetooth LED status light will stop flasing and turn solid blue. Reconnecting with previous devices • When the system is on, the speaker system will automatically search and attempt connect with the last paired device. • Make sure this Bluetooth source is nearby the system to automatically reconnect. Force pairing and connection with new devices • When the system is on, the speaker system has connected to any existing device. Press and hold the source button for three seconds until blue LED begins blinking. Search your new device’s Bluetooth list for “AmazonBasics Speakers” and tap to connect/pair. AUX IN Connection Auxiliary input jack Connect to audio out source Aux cable included • Speakers default to Bluetooth mode when initially turned on. Press the Source button once and you will hear a tone as the system switches to AUX IN mode. The LED status light will change to solid GREEN. Connect your source device to the AUX IN jacks on the control pod. Warranty Information To obtain a copy of the warranty for this product: Visit amazon.com/AmazonBasics/Warranty — or — Contact Customer Service at 1-866-216-1072 Feedback Love it? Hate it? Let us know with a customer review. AmazonBasics is committed to delivering customer-driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product. Please visit: amazon.com/review/review-your-purchases# For further services: Visit amazon.com/gp/help/customer/contact-us — or — Contact Customer Service at 1-866-216-1072 amazon.com/AmazonBasics MADE IN CHINA FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/ TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, Human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation Industry Canada Notice This device complies with Industry Canada licence-exempt RSS standard(s). 1. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device." 2.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Avis d’Industrie Canada Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Cet appareil numérique ne dépasse pas les Rèlements sur l’interférence radio par un appareil numérique de classe B stipulées dans les Règlement sur l’interférence redio d’industrie Canada
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2018:10:11 14:30:00+08:00 Creator : Adobe InDesign CC 13.1 (Macintosh) Modify Date : 2018:10:27 14:14:16+08:00 Has XFA : No Language : en-US Tagged PDF : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2018:10:27 14:14:16+08:00 Creator Tool : Adobe InDesign CC 13.1 (Macintosh) Instance ID : uuid:a2d6f5d7-c02d-46d0-afdd-ab3d9c778e24 Original Document ID : xmp.did:104F07193D2068118C14811D37B5C016 Document ID : xmp.id:40e990c6-12a7-483a-8b5a-25f4bf42d9f1 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:847ba705-c58e-44c5-ac82-2076cab3c1fc Derived From Document ID : xmp.did:acd922bd-6595-439e-a820-2e07d6ec8a28 Derived From Original Document ID: xmp.did:104F07193D2068118C14811D37B5C016 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 13.1 (Macintosh) History Changed : / History When : 2018:10:11 14:30+08:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 11EXIF Metadata provided by EXIF.tools