Cyber Acoustics PSB4721 2.1 wireless speaker system User Manual NS PSB4721 16 0186 QSG V1 ai

Cyber Acoustics (HK) Ltd. 2.1 wireless speaker system NS PSB4721 16 0186 QSG V1 ai

Users Manual

QUICK SETUP GUIDE 2.1 Bluetooth Speaker System NSPSB4721TURNING YOUR SPEAKERS ON AND OFFMove the ON/OFF switch on the side of your Control Podto the ON position. When you rst turn on your speakers, they are in Bluetooth pairing mode and the indicator LED blinks blue.CONNECTING WITH BLUETOOTH1  Make sure that your Bluetooth device is turned on and within 33 feet (10 meters) of your speakers.2  On your control pod, turn your speakers on. The indicator LED blinks blue to indicate that it's in pairing mode.3  Turn on your Bluetooth device and turn on Bluetooth. Set your device to pairing mode, then select NS-PSB4721. See the instructions that came with your Bluetooth device for information about pairing.4  If you are asked for a password, enter 0000. When pairing is complete, the LED lights solid blue.5  To disconnect from the paired Bluetooth device, turn your speakers o.RECONNECTING TO A PAIRED DEVICEWhen your speakers are not paired to a device, the LED blinks blue slowly.LISTENING TO MUSIC1  Turn on your speakers, then connect to your Bluetooth device. 2  Press the input select button to select the input you want. The blue LED indicates Bluetooth and the red LED indicates AUX mode.PACKAGE CONTENTS•  Satellite speakers (2)• Subwoofer• Control pod•  Quick Setup GuideFEATURES•  Wirelessly stream from any Bluetooth device•  Volume and bass controls on the control pod•  Compatible with Bluetooth version V4.2/V4.1/V4.1 BLE, V3.0, & V2.1.  CONNECT THE SPEAKERS1  Plug the satellite speakers into the To Speaker jack on the back of the subwoofer.2  Plug the power cable into a power outlet or surge protector.Your speakers lose the Bluetooth connection if you...Turn o your speakers.Move the Bluetooth device out of range.Turn o your Bluetooth device.Turn o Bluetooth on your Bluetooth device.Connect your Bluetooth device to another Bluetooth device.To reconnect...Turn on your speakers. Your speakers search for the last connected Bluetooth device and reconnect.Make sure that your Bluetooth device is within 33 feet of your speakers.Turn on your Bluetooth device, then make sure that Bluetooth is on.Turn on Bluetooth on your Bluetooth device.Disconnect your Bluetooth device from the other Bluetooth device, then set your device to pairing mode. Select NS-PSB4721 on your Bluetooth device.Before using your new product, please read these instructions to prevent any damage.LEDBlinks blueSolid blueSolid red DESCRIPTIONSpeakers are in pairing modeSpeakers are pairedAUX mode            Flat size (W×H): 12.44 x 11.69 in (315.976 × 296.93 mm.)Final folded size: 4.14 x 11.69 in (105.156 × 296.93 mm.)Control PodMaster volume controlLEDOn/O switchHeadphone jackInput buttonAUX jackBass volume buttonSubwooferSatellite speakers NS-PSB4721_16-0186_QSG_V1.ai   1   7/1/2016   2:06:05 PMNS-PSB4721_16-0186_QSG_V1.ai   1   7/1/2016   2:06:05 PMV1FINALFOR PRINT
V1 ENGLISH 16-0186TROUBLESHOOTINGSAFETY INSTRUC TIONS1   Read, follow, and save all instructions and documentation.2   Do not use this apparatus near water.3   Clean only with a dry cloth.4  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.5   Do not install near any heat sources such as radiators, heat registers, stoves, or other 6   Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong consult an electrician for replacement of the obsolete outlet.  7   Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.  10   Unplug this apparatus during lightning storms or when unused for long periods of time.apparatus has been damaged in an way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.12   Keep the unit in a well-ventilated environment. Do not install this equipment in a 13   WARNINGvases, shall be placed on it. 14   WARNING: The wall plug is the disconnecting device. The plug must remain readily operable.WARNING: appliance to rain or moisture.CAUTION: Use of controls or adjustments or performance of procedures other CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICING TO QUALIFIED SERVICE PERSONNEL.intended to alert the user to presence of uninsulated “dangerous voltage” risk of electric shock to persons.   The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. LEGAL NOTICESThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC Caution:This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful and on, the user is encouraged to try to connect the interference by one or more of the following measures:   •  Reorient or relocate the receiving antenna.   •  Increase the separation between the equipment and receiver.receiver is connected. •   Consult the dealer or an experienced radio/TV technician for help.FCC warningRules could void the user's authority to operate this equipment.Canada ICES-003 statementThis Class B digital apparatus complies with Canadian ICES-003. Visit www.insigniaproducts.com for details.CONTACT INSIGNIA:1-877-467-4289 (U.S. and Canada)01-800-926-3000 (Mexico)www.insigniaproducts.comDistributed by Best Buy Purchasing, LLC©2016 Best Buy. All rights reserved.Made in China3 Begin playback on your Bluetooth device. 4 Adjust the volume on your speakers by turning the master volume control. To control the bass, adjust the bass volume button. PLAYBACK USING AUX IN1 Connect an external sound source, such as an MP3 player, by plugging a 3.5 mm audio cable (not included) into the AUX jack on your control pod.2 Press the Input button to enter AUX mode. The LED lights red. 3  Start playback on the external device.4 Turn the master volume control to adjust the volume.5  Control playback using the controls on the audio device.TROUBLESHOOTINGPROBLEMNo powerNo sound or low volume Cannot establish Bluetooth connectionSOLUTION• Make sure that your speakers are plugged in.• Make sure that your speakers are turned on.• Make sure that your Bluetooth device is turned on, Bluetooth is turned on, and NS-PSB4721 is selected.• Turn up the volume on your speakers.• Turn up the volume on your Bluetooth device.• Make sure that your Bluetooth device is not muted.• Make sure that your speakers are not paired to another Bluetooth device.• Make sure that your Bluetooth device is not paired to another Bluetooth device.• Shorten the distance between your speakers and your Bluetooth device.your Bluetooth device.• Make sure that your speakers are not paired to another Bluetooth device.• Make sure that your speakers and Bluetooth device are both in pairing mode.• Make sure that your Bluetooth device supports Bluetooth v4.0 and below.• Make sure that your Bluetooth device is not connected to any other device.• Make sure that you have selected NS-PSB4721 on your Bluetooth device.• If a passcode is needed, enter 0000.3.5 mm cable (not included)The equipment complies with FCC Radiation exposure limits set forth for uncontrolled environment. and your body.This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this  device must accept any interference, including interference that may cause undesired operation of the device.PROBLEMMy Bluetooth device keeps unpairing“NS-PSB4721” does not appear on my Bluetooth deviceSound is distortedSound is comingfrom one speaker SOLUTION• Shorten the distance between your speakers and your Bluetooth device.• If the battery on your Bluetooth device is low, recharge the battery.• Shorten the distance between your speakers and your Bluetooth device.• Put your speakers into pairing mode, then refresh your list of Bluetooth devices. For more information, see the documentation that came with your Bluetooth device.• Adjust the master volume control to the ¼ or ½ level.• Adjust volume settings on the output device (computer or portable audio source).• Make sure that all connections are correct and secure.• If your speaker system is connected to a computer, adjust your computer’s audio levels to balance the sound coming from the speakers.• Make sure that all connections are correct and secure.Input buttonCAUTION RISK OF ELECTRIC SHOCK DO NOT OPENNS-PSB4721_16-0186_QSG_V1.ai   2   7/1/2016   2:06:05 PMCet appareil est conforme à Industrie Canada exempts de licence standard RSS (s). Le fonctionnement estsoumis aux deux conditions suivantes: (1) ce dispositif ne peut pas provoquer  d'interférences et (2) cetappareil doit accepter toute interférence, y compris les interférences  qui peuvent causer un mauvaisfonctionnement de l'appareil.

Navigation menu