Cyber Blue BSK57 Bluetooth Speaker User Manual BSK57 8605
Cyber Blue (HK) Limited Bluetooth Speaker BSK57 8605
Users Manual
User Manual
Bluetooth Speaker
Model name:BSK57-8605
FCC ID:UFDBSK57
Thank you use our product: Bluetooth Speaker
Please read this manual before use product.
1.The function of product:
Power on In the off state,,switch “on” button,blue light flash 3S,speaker
beeps. when power on or manually disconnected, into pairing
mode automatically。
Pair connect: In the off state,,long press multifunction 3S until blue and red light
alternately flash. use mobile phone to search and connect, the speaker beeps.
Reset Press volume “+” button then charge can be reset
Volume adjust Short press the volume key (+) can increase the volume ,short
press the volume (-) can decrease the volume (The maximum and
minimum volume speaker beeps )
Play and pause Short press multifunction button can transfer play/pause
Last/next Long press volume- button 3S play last one song, long press volume+ button
3S can play next one song.
Exit the
pairing mode
automatically
Pair mode not connect for 5 minutes will exit pair mode automatically, to
connectionless standby mode.
Auto power-off Lost connection for 30 minutes or the battery voltage below 3.2
ford
Manual
shutdown
In the boot of the state, long press the multifunction key 3
seconds, the red light flashes three times, the speaker beeps.
2.LED light indicator
Power on Blue light flash 3times quickly
Power off Red light flash 3 times quickly
Standby(not
connect with
mobile phone)
Blue light flash one time every 5S
standby(connect
with mobile
phone)
Blue light flash one time every 7S
charging Red light flash long.
Full charge Red light die out
Low voltage
alarm
Red light flash one time every 60S and speaker beeps
3.FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.