Cyber Blue W4 Kids GPS Tracking Unit User Manual

Cyber Blue (HK) Limited Kids GPS Tracking Unit Users Manual

Contents

Users Manual

Product Team
Page 1 of 6
Key Function Definitions of Kid’s
GPS Tracking Unit
1. Overview of the Product ............................................................................................... 2
2. Key Description ................................................................................................................ 2
3. Accessory Functions and Related Operations ................................................................ 2
3.1Power On/Off ........................................................................................................... 2
3.2 Accompanying Mode .............................................................................................. 2
3.3Off-body Alarm ......................................................................................................... 3
3.4 Recording ............................................................................................................... 3
3.5 Positioning .............................................................................................................. 3
3.6SOS Help ................................................................................................................. 3
Product Team
Page 2 of 6
1. Overview of the Product
This product is a smart multi-functional wearable electronic Accessory specifically designed
for kids’ safety and security. With a built-in professional GPS chip and a WiFi module, the
Accessory can be pinpointed no matter where a kid wearing it goes. Additionally, the
Accessory is also equipped with such functions as traceability through the tracing mode,
SOS help, helping to keep parents well informed of the whereabouts of their children and
thus effectively ensure their safety. 1 SIM IC of internet of thins will be integrated. That’s no
support of speech communication. All data will be transmitted with GPRS mode.
2. Key Description
key name
location
function
Button A
Face up
SOS+Startup
Button A
3. Accessory Functions and Related Operations
3.1Power On/Off
Press and hold Button A for three seconds to turn on the Accessory; to turn it off, a power-off
instruction is needed from the APP.
3.2 Accompanying Mode
The APP can send an instruction to switch the Accessory into a tracing mode. In this mode, when
the distance between the Accessory and the mobile phone sending the instruction exceeds a certain
limit, the APP will receive a security alert, warning that the child wearing the Accessory is too far
away from the parent who controls the APP.
Product Team
Page 3 of 6
3.3Off-body Alarm
The user can set the alarm time period and test duration, and send instructions to the device
via the APP. For example, set the alarm time to 9:00 to 18:00 and test duration to 10 minutes.
Upon completion of the settings, the device will enable the alarm function from 9:00 to 18:00 and
trigger the alarm function when detecting that the device is uninterruptedly in static mode for
more than 10 minutes, prompting the user that the Accessory may have broken away from the
kids’ body.
3.4 Recording
The parent can send an instruction requesting voice recording via APP to the Accessory,
which, after receiving the instruction, will execute a voice recording for a length of 15 seconds
and send the recording back via the server to the APP.
3.5 Positioning
The parent can send an instruction requesting location via APP to the Accessory, which, after
receiving the instruction, will enable the GPS and upload the location results, together with the
ambient WiFi hotspot and base station information to the server. Then, the server will conduct a
hybrid location and push the final results to the APP.
3.6SOS Help
In normal mode, press and hold Button A for more than 3 seconds and the parents’ APP can
receive help information from kids, including the current location of kids and 15-second
environment recording.
SOS process of Kid’s GPS Tracking Unit
Accessory
Cloud
APP
Product Team
Page 4 of 6
Press and hold Button A
for more than 3 seconds
Send SOS information to
the cloud, including the
current location and 15-
second environment
recording
Receive information and
prompt the user with
sound, vibration and
popup page
View the current
location and listen to
15-second environment
recording
Product Team
Page 5 of 6
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information (SAR)
This device is designed and manufactured not to be exceeded the emission limits for
exposure to radio frequency RF energy set by the Federal Communications Commission
of the United States. The exposure standard for wireless devices employing a unit of
measurement is known as the Specific Absorption Rate (SAR), and the SAR limit set by
FCC is 1.6 W/kg.
*Tests for SAR are conducted using standard operating positions accepted by the
FCC with the device transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power level, the actual
SAR level of the device while operating can be well below the maximum value. This is
because the device is designed to operate at multiple power levels so as to use only the
poser required to reach the network. In general, the closer you are to a wireless base
Product Team
Page 6 of 6
station antenna, the lower the power output.
The highest SAR value for the device as reported to the FCC when tested for use
when worn on the body, as described in this user guide, is 0.982W/kg (Body-worn
measurements differ among devices, depending upon available enhancements and FCC
requirements.) While there may be differences between the SAR levels of various
devices and at various positions, they all meet the government requirement.
The FCC has granted an Equipment Authorization for this device with all reported
SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR
information on this device is on file with the FCC and can be found under the Display
Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: UFDW4. For
body worn operation, this device has been tested and meets the FCC RF exposure
guidelines for use with an accessory that contains no metal and the positions the handset
a minimum of 0.5 cm from the body. Use of other enhancements may not ensure
compliance with FCC RF exposure guidelines. If you do not use a body-worn accessory
a, position the handset a minimum of 0.5 cm from your body when the device is switched
on.

Navigation menu