CyberOptics 002 WaferSense Link User Manual WaferSense TM ALS150 200 300 User s Guide

CyberOptics Semiconductor WaferSense Link WaferSense TM ALS150 200 300 User s Guide

User Manual

CyberOptics
Semiconductor
WaferSense
ALS150/200/300
User’s Guide
ii
General
Information
WaferSense ALS
Changes or modifications not expressly approved by CyberOptics Semiconductor, Inc., may
void your authority to operate the WaferSense ALS.
The radio contained in the WaferSense ALS meets all the applicable FCC requirements for RF
Safety. While in operation, the FCC requires users and nearby persons to maintain a minimum
separation distance of 20 cm (8 inches) or farther from the WaferSense ALS.
WaferSense Link
Changes or modifications not expressly approved by CyberOptics Semiconductor, Inc., may
void your authority to operate the WaferSense Link.
The WaferSense Link has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The radio contained in the WaferSense Link meets all the applicable FCC requirements for RF
Safety. While in operation, the FCC requires users and nearby persons to maintain a minimum
separation distance of 20 cm (8 inches) or further from the WaferSense Link.
WaferSense Link
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
iii
WaferSense Technical Support
Technical support is available from CyberOptics Semiconductor Monday through Friday,
8:00am to 5:00pm Pacific Time.
WaferSense and LevelView are trademarks of CyberOptics Semiconductor, Inc.
Third-party brands and names are the property of their respective owners.
Copyright © 2003-2005, CyberOptics Semiconductor, Inc. All rights reserved.
CyberOptics Semiconductor, Inc.
13555 S.W. Millikan Way
Beaverton, OR 97005
P/N 920-0026-03
E-mail: CSsupport@cyberoptics.com
Phone: (503) 495-2200
800-366-9131 (US and Canada only)
Fax: (503) 495-2201

Navigation menu