CyberTAN Technology RV215W Wireless-N VPN Firewall User Manual Statement 802 11bgn device

Download:
Mirror Download [FCC.gov]
Document ID	1756509
Application ID	fyvczVkF67OI8gDoswu0nQ==
Document Description	User Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.03kB (50396 bits)
Date Submitted	2012-07-31 00:00:00
Date Available	2012-12-31 00:00:00
Creation Date	2012-07-27 17:11:07
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2012-07-31 16:27:43
Document Title	Microsoft Word - Statement-802.11bgn device
Document Creator	PScript5.dll Version 5.2
Document Author:	eden

Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Radiation Exposure Statement:
To comply with FCC/IC RF Exposure Limits set forth for an uncontrolled environment, the product
must be installed and operated with a minimum separation distance (between nearby person(s) and
radiating antenna) according to the following scenarios:
1. 20cm minimum when the product is operated alone without co-transmitting with a plug-in 3G USB
dongle device.
2. 20cm minimum when the product is operated with a plug-in 3G USB device which has maximum of
2W ERP output power. 3. For co-transmission scenario which is not covered above, please consult the
RF technician or device supplier.
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio
exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne
doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y
compris un brouillage susceptible de provoquer un fonctionnement indésirable.
RF EXPOSURE SAFEFY NOTICE:
To comply with FCC/IC RF Exposure Limits set forth for an uncontrolled environment, the product
must be installed and operated with a minimum separation distance (between nearby person(s) and
radiating antenna) according to the following scenarios:
1. 20cm minimum when the product is operated alone without co-transmitting with a plug-in 3G USB
dongle device.
2. 20cm minimum when the product is operated with a plug-in 3G USB device which has maximum of
2W ERP output power.
3. For co-transmission scenario which is not covered above, please consult the RF technician or
device supplier.
AVERTISSEMENT DE SECURITE CONCERNANT LES EXPOSITIONS AUX
FREQUENCES RADIO
Pour etre conforme aux limites d’exposition aux frequences radio FCC/IC etablies pour un
environnement non controle (utilisation par le grand public), l’equipement doit etre installe et utilise en
laissant une distance de separation de securite (entre la ou les personnes presentes dans le perimetre et
l’antenne d’emission) selon les cas suivants :
1.
20cm au minimum quand le produit est utilise seul sans co-transmettre a l’aide d’un appareil 3G
USB enfichable.
2.
20cm au minimum quand le produit est utilise avec un appareil 3G USB enfichable ayant une
puissance de sortie maximale de 2W ERP.
3.
Dans des cas de co-transmission non mentionnes ci-dessus, merci de bien vouloir consulter un
technicien radio qualifie ou directement le fabricant de l’appareil.
This device has been designed to operate with a Dipole antenna have a maximum gain of [2] dB.
Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required
antenna impedance is 50 ohms.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type
and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This radio transmitter (IC: 5005A-RV215W / Model: RV215W) has been approved by Industry Canada
to operate with the antenna type, maximum permissible gain and required antenna impedance for each
antenna type indicated. Antenna types not included in this user’s manual, having a gain greater than the
maximum gain indicated for that type, are strictly prohibited for use with this device.
Ce dispositif a été conçu pour fonctionner avec une antenne ayant un gain maximal de Dipole antenne
avec dB [2]. Une antenne à gain plus élevé est strictement interdite par les règlements d'Industrie
Canada. L'impédance d'antenne requise est de 50 ohms.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peutfonctionner avec
une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pourl'émetteur par Industrie Canada.
Dans le but de réduire les risques de brouillage radioélectriqueà l'intention des autres utilisateurs, il
faut choisir le type d'antenne et son gain de sorte que lapuissance isotrope rayonnée équivalente (p.i.r.e.)
ne dépasse pas l'intensité nécessaire àl'établissement d'une communication satisfaisante.
Le présent émetteur radio (IC: 5005A-RV215W / Model: RV215W)
a été approuvé par Industrie
Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible
maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette
liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour
l'exploitation de l'émetteur.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Format                          : application/pdf
Creator                         : eden
Title                           : Microsoft Word - Statement-802.11bgn device
Create Date                     : 2012:07:27 17:11:07+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2012:07:31 16:27:43+08:00
Metadata Date                   : 2012:07:31 16:27:43+08:00
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:d46e04a0-a9bc-4f27-9d1d-967060d9e386
Instance ID                     : uuid:53bb3b7c-69b2-4f9b-93de-36557ff452ca
Page Count                      : 3
Author                          : eden

EXIF Metadata provided by EXIF.tools